[U-Boot] [PATCH v3] QE: add QE support on SD boot

[york sun]

On 05/08/2017 11:32 PM, Zhao Qiang wrote:
> modify u_qe_init to upload QE firmware from SD card when it is SD
> boot
>
> Signed-off-by: Zhao Qiang <qiang.zhao at nxp.com>
> ---
> Changes for v2:
> 	- fix issue of memory leak
> Changes for v3:
> 	- add CONFIG_SYS_QE_FMAN_FW_IN_NOR to ls1021a

<snip>

>  /*
> diff --git a/include/configs/ls1043a_common.h b/include/configs/ls1043a_common.h
> index e269248..80c508e 100644
> --- a/include/configs/ls1043a_common.h
> +++ b/include/configs/ls1043a_common.h
> @@ -219,6 +219,7 @@
>   */
>  #define CONFIG_SYS_QE_FMAN_FW_IN_MMC
>  #define CONFIG_SYS_FMAN_FW_ADDR		(512 * 0x820)
> +#define CONFIG_SYS_QE_FW_ADDR		(512 * 0x4a08)
>  #elif defined(CONFIG_QSPI_BOOT)
>  #define CONFIG_SYS_QE_FW_IN_SPIFLASH
>  #define CONFIG_SYS_FMAN_FW_ADDR		0x400d0000
> @@ -230,6 +231,7 @@
>  #define CONFIG_SYS_QE_FMAN_FW_IN_NOR
>  /* FMan fireware Pre-load address */
>  #define CONFIG_SYS_FMAN_FW_ADDR		0x60300000
> +#define CONFIG_SYS_QE_FW_ADDR		0x60600000

Qiang,

Your patch and Alison's patch 
(http://patchwork.ozlabs.org/patch/755865/) both modify the mapping. 
Please confirm the addresses are still OK with both patches.

York