[U-Boot] [PATCH v3] QE: add QE support on SD boot

[Qiang Zhao]

On 05/16/2017 1:26 AM, York Sun <york.sun at nxp.com> wrote:
> -----Original Message-----
> From: york sun
> Sent: Tuesday, May 16, 2017 1:26 AM
> To: Qiang Zhao <qiang.zhao at nxp.com>; Alison Wang <alison.wang at nxp.com>
> Cc: Mingkai Hu <mingkai.hu at nxp.com>; Xiaobo Xie <xiaobo.xie at nxp.com>; u-
> boot at lists.denx.de
> Subject: Re: [PATCH v3] QE: add QE support on SD boot
> 
> On 05/08/2017 11:32 PM, Zhao Qiang wrote:
> > modify u_qe_init to upload QE firmware from SD card when it is SD boot
> >
> > Signed-off-by: Zhao Qiang <qiang.zhao at nxp.com>
> > ---
> > Changes for v2:
> > 	- fix issue of memory leak
> > Changes for v3:
> > 	- add CONFIG_SYS_QE_FMAN_FW_IN_NOR to ls1021a
> 
> <snip>
> 
> >  /*
> > diff --git a/include/configs/ls1043a_common.h
> > b/include/configs/ls1043a_common.h
> > index e269248..80c508e 100644
> > --- a/include/configs/ls1043a_common.h
> > +++ b/include/configs/ls1043a_common.h
> > @@ -219,6 +219,7 @@
> >   */
> >  #define CONFIG_SYS_QE_FMAN_FW_IN_MMC
> >  #define CONFIG_SYS_FMAN_FW_ADDR		(512 * 0x820)
> > +#define CONFIG_SYS_QE_FW_ADDR		(512 * 0x4a08)
> >  #elif defined(CONFIG_QSPI_BOOT)
> >  #define CONFIG_SYS_QE_FW_IN_SPIFLASH
> >  #define CONFIG_SYS_FMAN_FW_ADDR		0x400d0000
> > @@ -230,6 +231,7 @@
> >  #define CONFIG_SYS_QE_FMAN_FW_IN_NOR
> >  /* FMan fireware Pre-load address */
> >  #define CONFIG_SYS_FMAN_FW_ADDR		0x60300000
> > +#define CONFIG_SYS_QE_FW_ADDR		0x60600000
> 
> Qiang,
> 
> Your patch and Alison's patch
> (http://patchwork.ozlabs.org/patch/755865/) both modify the mapping.
> Please confirm the addresses are still OK with both patches.

Thank you for your reminders.
I will rebase my patch on her patch.

BR
Qiang Zhao