[U-Boot] [PATCH V2 09/12] imx: mx7dsabresd: enable more DM drivers

[Stefano Babic]

Hi Peng,

On 13/04/2017 08:09, Peng Fan wrote:
> Enable more DM drivers. The imx I2C/MMC DM drivers needs DM_GPIO
> enabled. The 74x164 drivers needs SOFT_SPI and DM_GPIO enabled.
> So needs to enable them together.
> 
> Signed-off-by: Peng Fan <peng.fan at nxp.com>
> Cc: Stefano Babic <sbabic at denx.de>
> ---
> 
> V2:
>  None
> 
>  board/freescale/mx7dsabresd/mx7dsabresd.c | 288 ++----------------------------
>  configs/mx7dsabresd_defconfig             |  21 +++

This does not patch mx7dsabresd_secure_defconfig, that results then
broken. I have just fixed in my local branch and I send a patch for it
(I can just test build).

Regards,
Stefano

-- 
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================