[U-Boot] [PATCH] imx: mx7dsabresd: fix secure config after switching to DM

[Stefano Babic]

mx7dsabresd_secure_defconfig was not updated after moving to DM.

Signed-off-by: Stefano Babic <sbabic at denx.de>
---
 configs/mx7dsabresd_secure_defconfig | 26 ++++++++++++++++++++++++--
 1 file changed, 24 insertions(+), 2 deletions(-)

diff --git a/configs/mx7dsabresd_secure_defconfig b/configs/mx7dsabresd_secure_defconfig
index 2e8b5be..c678e75 100644
--- a/configs/mx7dsabresd_secure_defconfig
+++ b/configs/mx7dsabresd_secure_defconfig
@@ -1,11 +1,13 @@
 CONFIG_ARM=y
 CONFIG_ARCH_MX7=y
 CONFIG_TARGET_MX7DSABRESD=y
+CONFIG_VIDEO=y
 CONFIG_ARMV7_BOOT_SEC_DEFAULT=y
+# CONFIG_ARMV7_VIRT is not set
 CONFIG_IMX_RDC=y
 CONFIG_IMX_BOOTAUX=y
 # CONFIG_CMD_BMODE is not set
-CONFIG_VIDEO=y
+CONFIG_DEFAULT_DEVICE_TREE="imx7d-sdb"
 CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/mx7dsabresd/imximage.cfg"
 CONFIG_BOOTDELAY=3
 # CONFIG_CONSOLE_MUX is not set
@@ -31,15 +33,35 @@ CONFIG_CMD_MII=y
 CONFIG_CMD_PING=y
 CONFIG_CMD_BMP=y
 CONFIG_CMD_CACHE=y
+CONFIG_CMD_PMIC=y
+CONFIG_CMD_REGULATOR=y
 CONFIG_CMD_EXT2=y
 CONFIG_CMD_EXT4=y
 CONFIG_CMD_EXT4_WRITE=y
 CONFIG_CMD_FAT=y
+CONFIG_OF_CONTROL=y
+# CONFIG_BLK is not set
 CONFIG_DFU_MMC=y
 CONFIG_DFU_RAM=y
+CONFIG_DM_GPIO=y
+CONFIG_DM_74X164=y
+CONFIG_DM_I2C=y
+CONFIG_DM_MMC=y
+# CONFIG_DM_MMC_OPS is not set
 CONFIG_SPI_FLASH=y
 CONFIG_SPI_FLASH_EON=y
+CONFIG_PINCTRL=y
+CONFIG_PINCTRL_IMX7=y
+CONFIG_DM_PMIC=y
+CONFIG_DM_PMIC_PFUZE100=y
+CONFIG_DM_REGULATOR=y
+CONFIG_DM_REGULATOR_PFUZE100=y
+CONFIG_DM_REGULATOR_FIXED=y
+CONFIG_DM_REGULATOR_GPIO=y
+CONFIG_DM_SPI=y
+CONFIG_SOFT_SPI=y
 CONFIG_USB=y
+CONFIG_DM_USB=y
 CONFIG_USB_EHCI_HCD=y
 CONFIG_MXC_USB_OTG_HACTIVE=y
 CONFIG_USB_STORAGE=y
@@ -49,4 +71,4 @@ CONFIG_USB_GADGET_DOWNLOAD=y
 CONFIG_G_DNL_MANUFACTURER="FSL"
 CONFIG_G_DNL_VENDOR_NUM=0x0525
 CONFIG_G_DNL_PRODUCT_NUM=0xa4a5
-CONFIG_OF_LIBFDT=y
+CONFIG_ERRNO_STR=y
-- 
2.7.4