[U-Boot] [PATCH 1/4] spi: cadence_spi: Add cdns, trigger-address DT property

Rush, Jason A. Jason.Rush at gd-ms.com
Thu May 18 18:26:26 UTC 2017


The socfpga arch uses a different value for the indaddrtrig reg than
the ahbbase address. Adopting the cdns,trigger-address DT bindings
from the Linux kernel allows the trigger-address to be set correctly
on the socfpga arch.

Tested on Terasic SoCKit dev board (Altera Cyclone V)

Signed-off-by: Jason A. Rush <jason.rush at gd-ms.com>
---
 drivers/spi/cadence_qspi.c     | 2 ++
 drivers/spi/cadence_qspi.h     | 1 +
 drivers/spi/cadence_qspi_apb.c | 4 ++--
 3 files changed, 5 insertions(+), 2 deletions(-)

diff --git a/drivers/spi/cadence_qspi.c b/drivers/spi/cadence_qspi.c
index 9a6e41f330..b7bed4d4fc 100644
--- a/drivers/spi/cadence_qspi.c
+++ b/drivers/spi/cadence_qspi.c
@@ -297,6 +297,8 @@ static int cadence_spi_ofdata_to_platdata(struct udevice *bus)
 	plat->regbase = (void *)data[0];
 	plat->ahbbase = (void *)data[2];
 	plat->sram_size = fdtdec_get_int(blob, node, "sram-size", 128);
+	plat->trigger_address = fdtdec_get_uint(blob, node,
+		"cdns,trigger-address", 0);
 
 	/* All other paramters are embedded in the child node */
 	subnode = fdt_first_subnode(blob, node);
diff --git a/drivers/spi/cadence_qspi.h b/drivers/spi/cadence_qspi.h
index d1927a4003..20fc7a7d9d 100644
--- a/drivers/spi/cadence_qspi.h
+++ b/drivers/spi/cadence_qspi.h
@@ -26,6 +26,7 @@ struct cadence_spi_platdata {
 	u32		tchsh_ns;
 	u32		tslch_ns;
 	u32		sram_size;
+	u32		trigger_address;
 };
 
 struct cadence_spi_priv {
diff --git a/drivers/spi/cadence_qspi_apb.c b/drivers/spi/cadence_qspi_apb.c
index e02f2217f4..e4ad84c9b1 100644
--- a/drivers/spi/cadence_qspi_apb.c
+++ b/drivers/spi/cadence_qspi_apb.c
@@ -560,7 +560,7 @@ int cadence_qspi_apb_indirect_read_setup(struct cadence_spi_platdata *plat,
 		addr_bytes = cmdlen - 1;
 
 	/* Setup the indirect trigger address */
-	writel((u32)plat->ahbbase,
+	writel(plat->trigger_address,
 	       plat->regbase + CQSPI_REG_INDIRECTTRIGGER);
 
 	/* Configure the opcode */
@@ -710,7 +710,7 @@ int cadence_qspi_apb_indirect_write_setup(struct cadence_spi_platdata *plat,
 		return -EINVAL;
 	}
 	/* Setup the indirect trigger address */
-	writel((u32)plat->ahbbase,
+	writel(plat->trigger_address,
 	       plat->regbase + CQSPI_REG_INDIRECTTRIGGER);
 
 	/* Configure the opcode */
-- 
2.11.0



More information about the U-Boot mailing list