[U-Boot] [PATCH 0/4] spi: cadence_spi: Add cdns, trigger-address DT property

[Rush, Jason A.]

This patch series addresses an issue with the indaddrtrig
register on the Cadence QSPI device being programmed with
the wrong value for the socfpga arch.  Adopting the
trigger-address DT bindings from the Linux kernel allows
the indaddrtrig register to be set independently from the
ahbbase as required by the socfpga arch.

This patch series is a subset of a previous patch series.
The subset was requested to be submitted as a separate
patch[1].

[1]https://lists.denx.de/pipermail/u-boot/2017-March/283897.html

Tested on Terasic SoCKit dev board (Altera Cyclone V)

Jason A. Rush (4):
  spi: cadence_spi: Add cdns,trigger-address DT property
  dts: socfpga: Add trigger-address property to QSPI device
  dts: k2g: Add trigger-address property to QSPI device
  dts: stv0991: Add trigger-address property to QSPI device

 arch/arm/dts/keystone-k2g.dtsi | 1 +
 arch/arm/dts/socfpga.dtsi      | 1 +
 arch/arm/dts/stv0991.dts       | 1 +
 drivers/spi/cadence_qspi.c     | 2 ++
 drivers/spi/cadence_qspi.h     | 1 +
 drivers/spi/cadence_qspi_apb.c | 4 ++--
 6 files changed, 8 insertions(+), 2 deletions(-)

-- 
2.11.0