[U-Boot] binman: 'module' object has no attribute 'FinaliseOutputDir'

[Kevin Hilman]

While trying to build v2017.05 for sun5i-r8-chip (CHIP_defconfig), I get
the following build error.  I'm not familiar with binman, so not sure
what I should be looking for.

$ CROSS_COMPILE=arm-linux-gnueabihf- make

[...]

 LD      spl/drivers/serial/built-in.o
 LD      spl/drivers/built-in.o
 LD      spl/common/built-in.o
 LD      spl/lib/built-in.o
 LD      spl/u-boot-spl
 OBJCOPY spl/u-boot-spl-nodtb.bin
 COPY    spl/u-boot-spl.bin
 MKSUNXI spl/sunxi-spl.bin
 BINMAN  u-boot-sunxi-with-spl.bin
 binman: 'module' object has no attribute 'FinaliseOutputDir'
 Makefile:1107: recipe for target 'u-boot-sunxi-with-spl.bin' failed
 make: *** [u-boot-sunxi-with-spl.bin] Error 1


If it matters, compiler is: gcc version 5.3.1 20160412 (Linaro GCC 5.3-2016.05)

Kevin