[U-Boot] binman: 'module' object has no attribute 'FinaliseOutputDir'

[Simon Glass]

Hi Kevin,

On 31 May 2017 at 12:13, Kevin Hilman <khilman at baylibre.com> wrote:
> While trying to build v2017.05 for sun5i-r8-chip (CHIP_defconfig), I get
> the following build error.  I'm not familiar with binman, so not sure
> what I should be looking for.
>
> $ CROSS_COMPILE=arm-linux-gnueabihf- make
>
> [...]
>
>  LD      spl/drivers/serial/built-in.o
>  LD      spl/drivers/built-in.o
>  LD      spl/common/built-in.o
>  LD      spl/lib/built-in.o
>  LD      spl/u-boot-spl
>  OBJCOPY spl/u-boot-spl-nodtb.bin
>  COPY    spl/u-boot-spl.bin
>  MKSUNXI spl/sunxi-spl.bin
>  BINMAN  u-boot-sunxi-with-spl.bin
>  binman: 'module' object has no attribute 'FinaliseOutputDir'
>  Makefile:1107: recipe for target 'u-boot-sunxi-with-spl.bin' failed
>  make: *** [u-boot-sunxi-with-spl.bin] Error 1
>
>
> If it matters, compiler is: gcc version 5.3.1 20160412 (Linaro GCC 5.3-2016.05)

Do you know what version of python you are using? I cannot imagine
what is happening here.

>
> Kevin

Regards,
Simon