[U-Boot] [linux-sunxi] Re: [PATCH] sunxi: set the default CPUx frequency of H5 to 816MHz
Jagan Teki
jagannadh.teki at gmail.com
Wed Nov 1 09:16:58 UTC 2017
On Wed, Nov 1, 2017 at 7:40 AM, Ondřej Jirman <megi at xff.cz> wrote:
> Hi,
>
> Icenowy Zheng píše v St 01. 11. 2017 v 08:31 +0800:
>>
>> And according to the Orange Pi PC2 and Prime schematics, they both
>> start at 1.1V. (The Prime schematics even says "For H5 adjust
>> VDD-CPUX to 1.1V).
>>
>
> Orange Pi PC2 starts at the same voltage as Orange Pi PC. That is at
> 1.308V.
>
> It can be calculated from 0.6×(1+11.8÷10) as per the values of Ru1/Ru2
> resistors in the schema. It is also my experience of working with these
> boards and writing the sy8106a driver.
I think you reverse the Ru values according to pc2 and prime schematic
CPUX Vout = 0.6x(1+Ru1/Ru2)
so Ru1 10K and Ru2 11.8K then Vout = 0.6x(1+10/11.8) => 1.10V
thanks!
--
Jagan Teki
Free Software Engineer | www.openedev.com
U-Boot, Linux | Upstream Maintainer
Hyderabad, India.
More information about the U-Boot
mailing list