November 2017 Archives by author

• Messages sorted by: [ thread ] [ subject ] [ date ]
• More info on this list...

Starting: Wed Nov 1 00:31:46 UTC 2017
Ending: Thu Nov 30 23:10:32 UTC 2017
Messages: 2808

• [U-Boot] uboot xip eim nor   Amartya Shreyank (RBEI/ESD2)
• [U-Boot] U-boot configuration   A.W.C.
• [U-Boot] Problem with initialize in mmc_initialize in mmc.c   Faiz Abbas
• [U-Boot] [PATCH v4 1/3] thermal: ti-bandgap: Add support for temperature sensor   Faiz Abbas
• [U-Boot] [PATCH v5 0/3] Support for TI bandgap temperature sensor   Faiz Abbas
• [U-Boot] [PATCH v5 1/3] thermal: ti-bandgap: Add support for temperature sensor   Faiz Abbas
• [U-Boot] [PATCH v5 2/3] ARM: dts: OMAP5+: Add support for bandgap sensor in SPL   Faiz Abbas
• [U-Boot] [PATCH v5 3/3] ARM: dra7: Kconfig: Add thermal configs for dra7xx and am57xx   Faiz Abbas
• [U-Boot] [PATCH v3 1/2] LS1088A_QSPI: SECURE_BOOT: Images validation   Udit Agarwal
• [U-Boot] [PATCH v4 1/2] LS1088A_QSPI: SECURE_BOOT: Images validation   Udit Agarwal
• [U-Boot] [PATCH v4 2/2] LS1088A_QSPI: Add secure boot defconfigs for QSPI boot.   Udit Agarwal
• [U-Boot] [Patch v3] LS2080A_SECURE_BOOT: Enable CONFIG_FSL_LS_PPA.   Udit Agarwal
• [U-Boot] [PATCH v2] board: freescale: ls1012a: LS1012A-2G5RDB board support   Poonam Aggrwal
• [U-Boot] [PATCH 8/9] fsl: csu: enable ns access for PFE   Poonam Aggrwal
• [U-Boot] [PATCH 7/9] armv8: fsl-lsch2: configure pfe's scfg & dcfg registers   Poonam Aggrwal
• [U-Boot] [PATCH] envtools: make sure version/timestamp header file are available   Stefan Agner
• [U-Boot] [OE-core] [PATCH] u-boot: Upgrade to 2017.11 release   Stefan Agner
• [U-Boot] sunxi: broken sun4i_emacs, all boards?   Artturi Alm
• [U-Boot] sunxi: broken sun4i_emacs, all boards?   Artturi Alm
• [U-Boot] [PATCH 1/2] sunxi: fix CONFIG_SUNXI_EMAC references   Artturi Alm
• [U-Boot] [PATCH 2/2] sunxi: restore PHYLIB for CONFIG_SUN4I_EMAC users   Artturi Alm
• [U-Boot] [PATCH v2] efi_loader: initialise partition_signature memory   Artturi Alm
• [U-Boot] [PATCH] ae3xx: timer: Fix ae3xx timer work abnormal in 64 bit.   Andes
• [U-Boot] [PATCH 0/3] ae3xx: timer: Rename AE3XX timer to ATCPIT100   Andes
• [U-Boot] [PATCH 1/3] ae3xx: timer: Rename AE3XX to ATCPIT100   Andes
• [U-Boot] [PATCH] enable debug uart   Andes
• [U-Boot] [PATCH 2/3] nds32: defconfig: Rename AE3XX_TIMER to ATCPIT100_TIMER   Andes
• [U-Boot] [PATCH 3/3] dt-bindings: timer: Add andestech atcpit100 timer binding doc   Andes
• [U-Boot] [PATCH] atcpit100: timer: Remove arch dependency.   Andes
• [U-Boot] [PATCH 0/3] spi: nds_ae3xx: Rename nds_ae3xx_spi as atcspi200_spi   Andes
• [U-Boot] [PATCH 1/3] spi: nds_ae3xx: Rename nds_ae3xx_spi as atcspi200_spi   Andes
• [U-Boot] [PATCH 2/3] nds32: defconfig: Rename NDS_AE3XX as ATCSPI200   Andes
• [U-Boot] [PATCH 3/3] dt-bindings: spi: Add andestech atcspi200 spi binding doc   Andes
• [U-Boot] [PATCH v2 1/3] ae3xx: timer: Rename AE3XX to ATCPIT100   Andes
• [U-Boot] [PATCH v2 2/3] cosmetic: atcpit100_timer: Rename function name as atcpit100   Andes
• [U-Boot] [PATCH v2 3/3] dt-bindings: timer: Add andestech atcpit100 timer   Andes
• [U-Boot] [PATCH v2 1/3] spi: nds_ae3xx: Rename nds_ae3xx_spi as atcspi200_spi   Andes
• [U-Boot] [PATCH v2 2/3] cosmetic: atcspi200: Rename function name as atcspi200   Andes
• [U-Boot] [PATCH v2 3/3] dt-bindings: spi: Add andestech atcspi200 spi binding doc   Andes
• [U-Boot] [PATCH v2 1/3] ae3xx: timer: Rename AE3XX to ATCPIT100   Andes
• [U-Boot] [PATCH v2 2/3] cosmetic: atcpit100_timer: Rename function name as atcpit100   Andes
• [U-Boot] [PATCH v2 3/3] dt-bindings: timer: Add andestech atcpit100 timer   Andes
• [U-Boot] [PATCH v2 0/3] Rename ae3xx timer to atcpit100   Andes
• [U-Boot] [PATCH v2 1/3] ae3xx: timer: Rename AE3XX to ATCPIT100   Andes
• [U-Boot] [PATCH v2 0/3] Rename ae3xx timer to atcpit100   Andes
• [U-Boot] [PATCH v2 2/3] cosmetic: atcpit100_timer: Rename function name as atcpit100   Andes
• [U-Boot] [PATCH v2 3/3] dt-bindings: timer: Add andestech atcpit100 timer   Andes
• [U-Boot] [PATCH v2 0/3] Rename ae3xx timer to atcpit100   Andes
• [U-Boot] [PATCH v3 0/4] Rename AE3XX timer to ATCPIT100   Andes
• [U-Boot] [PATCH v3 1/4] ae3xx: timer: Rename AE3XX to ATCPIT100   Andes
• [U-Boot] [PATCH v3 2/4] cosmetic: atcpit100_timer: Rename function name as atcpit100   Andes
• [U-Boot] [PATCH v3 3/4] cosmetic: atcpit100_timer: Use device api to get platdata   Andes
• [U-Boot] [PATCH v3 4/4] dt-bindings: timer: Add andestech atcpit100 timer   Andes
• [U-Boot] [PATCH v5 1/2] sun50i: h5: Add NanoPi Neo Plus2 DT initial support   Antony Antony
• [U-Boot] [PATCH v5 2/2] arm64: sun50i-h5.dtsi : update to kernel 4.14   Antony Antony
• [U-Boot] [PATCH v5 1/2] sun50i: h5: Add NanoPi Neo Plus2 DT initial support   Antony Antony
• [U-Boot] [PATCH v6 1/2] arm64: sun50i-h5.dtsi : update to kernel 4.14   Antony Antony
• [U-Boot] [PATCH v6 2/2] sun50i: h5: Add NanoPi Neo Plus2 DT initial support   Antony Antony
• [U-Boot] [RFC PATCH u-boot v2] ARM: arch-meson: build memory banks using reported memory from registers   Neil Armstrong
• [U-Boot] [PATCH u-boot 0/2] Add support for Amlogic GXL Based SBCs   Neil Armstrong
• [U-Boot] [PATCH u-boot 1/2] arm: Add LibreTech CC support based on Meson GXL family   Neil Armstrong
• [U-Boot] [PATCH u-boot 2/2] arm: Add Khadas VIM support based on Meson GXL family   Neil Armstrong
• [U-Boot] [PATCH u-boot] ARM: arch-meson: build memory banks using reported memory from registers   Neil Armstrong
• [U-Boot] [PATCH u-boot 1/2] arm: Add LibreTech CC support based on Meson GXL family   Neil Armstrong
• [U-Boot] [PATCH u-boot 2/2] arm: Add Khadas VIM support based on Meson GXL family   Neil Armstrong
• [U-Boot] [PATCH v2 0/5] Add support for Amlogic GXL Based SBCs   Neil Armstrong
• [U-Boot] [PATCH v2 1/5] ARM: arch-meson: add ethernet common init function   Neil Armstrong
• [U-Boot] [PATCH v2 2/5] board: odroid-c2: use common ethernet init function   Neil Armstrong
• [U-Boot] [PATCH v2 3/5] board: p212: use common ethernet init function   Neil Armstrong
• [U-Boot] [PATCH v2 4/5] arm: Add LibreTech CC support based on Meson GXL family   Neil Armstrong
• [U-Boot] [PATCH v2 5/5] arm: Add Khadas VIM support based on Meson GXL family   Neil Armstrong
• [U-Boot] v7_outer_cache_inval_range error on iMX6Q   Neil Armstrong
• [U-Boot] v7_outer_cache_inval_range error on iMX6Q   Neil Armstrong
• [U-Boot] [PATCH] fat: Use cache aligned buffers for fat_opendir   Neil Armstrong
• [U-Boot] [PATCH v2 1/5] ARM: arch-meson: add ethernet common init function   Neil Armstrong
• [U-Boot] [PATCH v2 4/5] arm: Add LibreTech CC support based on Meson GXL family   Neil Armstrong
• [U-Boot] [PATCH v2 0/5] Add support for Amlogic GXL Based SBCs   Neil Armstrong
• [U-Boot] [PATCH u-boot] ARM: arch-meson: build memory banks using reported memory from registers   Neil Armstrong
• [U-Boot] [PATCH v2 1/5] ARM: arch-meson: add ethernet common init function   Neil Armstrong
• [U-Boot] [PATCH u-boot v3 0/5] Add support for Amlogic GXL Based SBCs   Neil Armstrong
• [U-Boot] [PATCH u-boot v3 1/5] ARM: arch-meson: add ethernet common init function   Neil Armstrong
• [U-Boot] [PATCH u-boot v3 2/5] board: odroid-c2: use common ethernet init function   Neil Armstrong
• [U-Boot] [PATCH u-boot v3 3/5] board: p212: use common ethernet init function   Neil Armstrong
• [U-Boot] [PATCH u-boot v3 4/5] arm: Add LibreTech CC support based on Meson GXL family   Neil Armstrong
• [U-Boot] [PATCH u-boot v3 5/5] arm: Add Khadas VIM support based on Meson GXL family   Neil Armstrong
• [U-Boot] [PATCH u-boot v2] ARM: arch-meson: build memory banks using reported memory from registers   Neil Armstrong
• [U-Boot] [PATCH v3 5/7] bootcount: add support for bootcounter on EXT filesystem   Stefano Babic
• [U-Boot] [PATCH v3 3/7] pwm: imx: Enable PWM support on i.MX53   Stefano Babic
• [U-Boot] [PATCH v3 4/7] arm: mx5: Add more register definitions   Stefano Babic
• [U-Boot] [PATCH v3 7/7] mx53: Add Board support for GE PPD   Stefano Babic
• [U-Boot] [PATCH v3 3/7] pwm: imx: Enable PWM support on i.MX53   Stefano Babic
• [U-Boot] [PATCH v3 1/3] mx25: Move MX25 selection to Kconfig   Stefano Babic
• [U-Boot] [PATCH v3 1/2] i.MX6: engicam: Fix MAINTAINERS/README   Stefano Babic
• [U-Boot] [PATCH] imx6: iomux: Add generic function to set RGMII IO voltage on IMX6 SoCs   Stefano Babic
• [U-Boot] [PATCH v4] imx:display5: Add support for LWN's DISPLAY5 board (for v2017.11-rc2+)   Stefano Babic
• [U-Boot] [PATCH] imx6: iomux: Add generic function to set RGMII IO voltage on IMX6 SoCs   Stefano Babic
• [U-Boot] [PATCH] board: imx6: marsboard: Remove doubled #include <asm/arch/sys_proto.h>   Stefano Babic
• [U-Boot] [PATCH v5 2/8] ext4: recover from filesystem corruption when reading   Stefano Babic
• [U-Boot] [PATCH v5 7/8] board: ge: make VPD code common   Stefano Babic
• [U-Boot] [PATCH v5 3/8] pwm: imx: Enable PWM support on i.MX53   Stefano Babic
• [U-Boot] [PATCH v5 4/8] arm: mx5: Add more register definitions   Stefano Babic
• [U-Boot] [PATCH v5 8/8] mx53: Add Board support for GE PPD   Stefano Babic
• [U-Boot] [PATCH] board: imx6: marsboard: Remove doubled #include <asm/arch/sys_proto.h>   Stefano Babic
• [U-Boot] [PULL] Please pull u-boot-imx   Stefano Babic
• [U-Boot] Broadwell-DE porting code review   Stefano Babic
• [U-Boot] [PATCH v2 1/6] pico-imx6ul: Move dfu_alt_info to CONFIG_DFU_ENV_SETTINGS variable   Stefano Babic
• [U-Boot] [PATCH v5 1/8] imx: mxc_i2c: tweak the i2c transfer method   Stefano Babic
• [U-Boot] [PATCH 02/16] net: e1000: add support for writing to EEPROM   Stefano Babic
• [U-Boot] [PATCH 1/3] imx: Add a common way for detecting NXP boards revision   Stefano Babic
• [U-Boot] [PATCH 2/3] mx6sxsabresd: Load the correct dtb for revA board   Stefano Babic
• [U-Boot] [PATCH 3/3] mx6sxsabresd: Use PARTUUID to specify the rootfs location   Stefano Babic
• [U-Boot] [PATCH 1/2] mx6ull: Fix WDOG3 base address   Stefano Babic
• [U-Boot] [PATCH 2/2] imx: Also clear powerdown enable bit for WDOG3 on i.MX6ULL   Stefano Babic
• [U-Boot] [PATCH 1/3] imx: Add a common way for detecting NXP boards revision   Stefano Babic
• [U-Boot] [PATCH] [RFC] imx: dek_blob: Fix lock-up on dek_blob command   Stefano Babic
• [U-Boot] [PATCH v3 0/9] i.MX6: engicam: Add SPL_OF_CONTROL support   Stefano Babic
• [U-Boot] [PATCH 1/2] mx6ull: Fix WDOG3 base address   Stefano Babic
• [U-Boot] [PATCH 2/2] imx: Also clear powerdown enable bit for WDOG3 on i.MX6ULL   Stefano Babic
• [U-Boot] [PULL] Please pull u-boot-imx   Stefano Babic
• [U-Boot] [PATCH 00/23] imx: add i.MX8M support and i.MX8MQ EVK   Stefano Babic
• [U-Boot] [PATCH 01/23] imx: add i.MX8M into Kconfig   Stefano Babic
• [U-Boot] [PATCH 02/23] imx: mx8m: add register definition header file   Stefano Babic
• [U-Boot] [PATCH 04/23] imx: mx8m: add clock driver   Stefano Babic
• [U-Boot] [PATCH 05/23] imx: add sip function   Stefano Babic
• [U-Boot] [PATCH 06/23] imx: boot_mode: add USB_BOOT entry   Stefano Babic
• [U-Boot] [PATCH 01/23] imx: add i.MX8M into Kconfig   Stefano Babic
• [U-Boot] [PATCH 02/23] imx: mx8m: add register definition header file   Stefano Babic
• [U-Boot] [PATCH 08/23] imx: spl: implement spl_boot_device for i.MX8M   Stefano Babic
• [U-Boot] [PATCH 09/23] power: pmic.h: include dm/ofnode.h   Stefano Babic
• [U-Boot] [PATCH 21/23] power: pmic/regulator allow dm be omitted by SPL   Stefano Babic
• [U-Boot] [PATCH] dra7x: fastboot: Increase recovery partition size   Praneeth Bajjuri
• [U-Boot] [PATCH] dra7x: fastboot: Increase recovery partition size   Bajjuri, Praneeth
• [U-Boot] [PATCH] dra7x: fastboot: Increase recovery partition size   Bajjuri, Praneeth
• [U-Boot] [PATCH 3/3] Powerpc: pcie: Make pcie link state judgement more specific   Xiaowei Bao
• [U-Boot] regenerate a FIT image from u-boot   Valerio Bardelli
• [U-Boot] [PATCH 0/9] arm: zynq: ps7* consolidation   Gerald Van Baren
• [U-Boot] [PATCH v2 2/8] sf: spansion: Add support for S25FL128S_64K   Baudouin, Charles
• [U-Boot] UBI/UBIFS complete integrity check   Liam Beguin
• [U-Boot] UBI/UBIFS complete integrity check   Liam Beguin
• [U-Boot] UBI/UBIFS complete integrity check   Liam Beguin
• [U-Boot] [RFC PATCH] usb: ehci: do not invalidate a NULL buffer   Dirk Behme
• [U-Boot] [RFC PATCH] usb: ehci: do not invalidate a NULL buffer   Dirk Behme
• [U-Boot] [PATCH 1/1] fs: avoid possible NULL dereference in fs_devread   Marek Behun
• [U-Boot] [PATCH v4 0/7] Add VID support for QDS and RDB platforms   Rajesh Bhagat
• [U-Boot] [PATCH v4 1/7] armv8: lsch3: Add serdes and DDR voltage setup   Rajesh Bhagat
• [U-Boot] [PATCH v4 2/7] board: common:vid: Add LS1088A VID Supported voltage values   Rajesh Bhagat
• [U-Boot] [PATCH v4 3/7] board: common: vid: Add board specific vdd adjust API   Rajesh Bhagat
• [U-Boot] [PATCH v4 4/7] board: common: vid: Move IR chip specific code in flag   Rajesh Bhagat
• [U-Boot] [PATCH v4 5/7] Kconfig: Add LTC3882 voltage regulator config   Rajesh Bhagat
• [U-Boot] [PATCH v4 6/7] board: common: vid: Add support for LTC3882 voltage regulator chip   Rajesh Bhagat
• [U-Boot] [PATCH v4 7/7] ls1088a: Add VID support for QDS and RDB platforms   Rajesh Bhagat
• [U-Boot] [PATCH v4 1/7] armv8: lsch3: Add serdes and DDR voltage setup   Rajesh Bhagat
• [U-Boot] [PATCH v5 0/7] Add VID support for QDS and RDB platforms   Rajesh Bhagat
• [U-Boot] [PATCH v5 1/7] armv8: lsch3: Add serdes and DDR voltage setup   Rajesh Bhagat
• [U-Boot] [PATCH v5 2/7] board: common:vid: Add LS1088A VID Supported voltage values   Rajesh Bhagat
• [U-Boot] [PATCH v5 3/7] board: common: vid: Add board specific vdd adjust API   Rajesh Bhagat
• [U-Boot] [PATCH v5 4/7] board: common: vid: Move IR chip specific code in flag   Rajesh Bhagat
• [U-Boot] [PATCH v5 5/7] Kconfig: Add LTC3882 voltage regulator config   Rajesh Bhagat
• [U-Boot] [PATCH v5 6/7] board: common: vid: Add support for LTC3882 voltage regulator chip   Rajesh Bhagat
• [U-Boot] [PATCH v5 7/7] ls1088a: Add VID support for QDS and RDB platforms   Rajesh Bhagat
• [U-Boot] [PATCH v5 0/7] Add VID support for QDS and RDB platforms   Rajesh Bhagat
• [U-Boot] [PATCH v5 1/7] armv8: lsch3: Add serdes and DDR voltage setup   Rajesh Bhagat
• [U-Boot] [PATCH v5 1/7] armv8: lsch3: Add serdes and DDR voltage setup   Rajesh Bhagat
• [U-Boot] [PATCH v6 0/7] Add VID support for QDS and RDB platforms   Rajesh Bhagat
• [U-Boot] [PATCH v6 1/7] armv8: lsch3: Add serdes and DDR voltage setup   Rajesh Bhagat
• [U-Boot] [PATCH v6 2/7] board: common:vid: Add LS1088A VID Supported voltage values   Rajesh Bhagat
• [U-Boot] [PATCH v6 3/7] board: common: vid: Add board specific vdd adjust API   Rajesh Bhagat
• [U-Boot] [PATCH v6 4/7] board: common: vid: Move IR chip specific code in flag   Rajesh Bhagat
• [U-Boot] [PATCH v6 5/7] Kconfig: Add LTC3882 voltage regulator config   Rajesh Bhagat
• [U-Boot] [PATCH v6 6/7] board: common: vid: Add support for LTC3882 voltage regulator chip   Rajesh Bhagat
• [U-Boot] [PATCH v6 7/7] ls1088a: Add VID support for QDS and RDB platforms   Rajesh Bhagat
• [U-Boot] [PATCH v6 1/7] armv8: lsch3: Add serdes and DDR voltage setup   Rajesh Bhagat
• [U-Boot] [RESEND PATCH v7 00/10] Add VID support for QDS and RDB platforms   Rajesh Bhagat
• [U-Boot] [RESEND PATCH v7 01/10] armv8: lsch3: Add serdes and DDR voltage setup   Rajesh Bhagat
• [U-Boot] [RESEND PATCH v7 02/10] board: common:vid: Add LS1088A VID Supported voltage values   Rajesh Bhagat
• [U-Boot] [RESEND PATCH v7 03/10] board: common: vid: Add board specific vdd adjust API   Rajesh Bhagat
• [U-Boot] [RESEND PATCH v7 04/10] board: common: vid: Move IR chip specific code in flag   Rajesh Bhagat
• [U-Boot] [RESEND PATCH v7 05/10] Kconfig: Add LTC3882 voltage regulator config   Rajesh Bhagat
• [U-Boot] [RESEND PATCH v7 06/10] board: common: vid: Add support for LTC3882 voltage regulator chip   Rajesh Bhagat
• [U-Boot] [RESEND PATCH v7 07/10] ddr: fsl: set cdr1 first in case 0.9v VDD is enabled for some SoCs   Rajesh Bhagat
• [U-Boot] [RESEND PATCH v7 08/10] ls1088a: ddr: configure DDR for 0.9v for VID support   Rajesh Bhagat
• [U-Boot] [RESEND PATCH v7 09/10] common: board_f: vid: Add VID specific API to adjust core voltage   Rajesh Bhagat
• [U-Boot] [RESEND PATCH v7 10/10] ls1088a: Add VID support for QDS and RDB platforms   Rajesh Bhagat
• [U-Boot] [PATCH v5] arm64: ls1012ardb: Add distro boot support   Rajesh Bhagat
• [U-Boot] [PATCH v3] arm64: ls1012afrdm: Add distro boot support   Rajesh Bhagat
• [U-Boot] [PATCH] Makefile: Correct SPL/TPL/DTB build race condition   M. Vefa Bicakci
• [U-Boot] [PATCH] power: pmic/regulator: Add basic support for TPS65910   Felix Brack
• [U-Boot] [PATCH] power: pmic/regulator: Add basic support for TPS65910   Felix Brack
• [U-Boot] [PATCH] power: pmic/regulator: Add basic support for TPS65910   Felix Brack
• [U-Boot] [PATCH v3] power: extend prefix match to regulator-name property   Felix Brack
• [U-Boot] [PATCH] power: pmic/regulator: Add basic support for TPS65910   Felix Brack
• [U-Boot] [PATCH] power: pmic/regulator: Add basic support for TPS65910   Felix Brack
• [U-Boot] [PATCH] power: pmic/regulator: Add basic support for TPS65910   Felix Brack
• [U-Boot] [PATCH v2] power: pmic/regulator: Add basic support for TPS65910   Felix Brack
• [U-Boot] [PATCH v3] power: pmic/regulator: Add basic support for TPS65910   Felix Brack
• [U-Boot] [PATCH v3] power: pmic/regulator: Add basic support for TPS65910   Felix Brack
• [U-Boot] [PATCH v4] power: pmic/regulator: Add basic support for TPS65910   Felix Brack
• [U-Boot] [PATCH v2 0/3] net: update Ethernet for Renesas RZ/A1   Chris Brandt
• [U-Boot] [PATCH v2 1/3] net: sh-eth: fix inl and outl definitions   Chris Brandt
• [U-Boot] [PATCH v2 2/3] net: sh-eth: remove sh_eth_offset_rz table   Chris Brandt
• [U-Boot] [PATCH v2 3/3] net: miiphybb: fix casting error   Chris Brandt
• [U-Boot] [PATCH v2 0/3] net: update Ethernet for Renesas RZ/A1   Chris Brandt
• [U-Boot] [PATCH] cosmetic: rmobile: renesas spelled wrong   Chris Brandt
• [U-Boot] Where should Renesas RZ/A go under arch/arm/ ????   Chris Brandt
• [U-Boot] [PATCH] mmc: sh_mmcif: RZ/A1 does not support HS mode   Chris Brandt
• [U-Boot] [PATCH] mmc: sd_sdhi: add support for 32-bit data buffer   Chris Brandt
• [U-Boot] [PATCH] usb: r8a66597: Add support for RZ/A series   Chris Brandt
• [U-Boot] [PATCH] mmc: sd_sdhi: add support for 32-bit data buffer   Chris Brandt
• [U-Boot] [PATCH] usb: r8a66597: Add support for RZ/A series   Chris Brandt
• [U-Boot] [PATCH] mmc: sh_mmcif: RZ/A1 does not support HS mode   Chris Brandt
• [U-Boot] [PATCH] serial: sh: Add support for R7S72100 (RZ/A1)   Chris Brandt
• [U-Boot] [PATCH] usb: r8a66597: Add support for RZ/A series   Chris Brandt
• [U-Boot] [PATCH v2] usb: r8a66597: Add support for RZ/A series   Chris Brandt
• [U-Boot] [PATCH] usb: r8a66597: Add support for RZ/A series   Chris Brandt
• [U-Boot] [PATCH] usb: r8a66597: Add support for RZ/A series   Chris Brandt
• [U-Boot] [PATCH] usb: r8a66597: convert wait loop to readw_poll_timeout   Chris Brandt
• [U-Boot] [PATCH] usb: r8a66597: convert wait loop to readw_poll_timeout   Chris Brandt
• [U-Boot] [PATCH v2] usb: r8a66597: convert wait loop to readw_poll_timeout   Chris Brandt
• [U-Boot] [PATCH] arc: bootm: Move slave cores kick-starting under !fake   Alexey Brodkin
• [U-Boot] [PATCH] arc: cache: Add required NOPs after invalidation of instruction cache   Alexey Brodkin
• [U-Boot] [PATCH] usb: ehci: Fix accessors for big-endian platforms and descriptors   Alexey Brodkin
• [U-Boot] Please pull ARC changes   Alexey Brodkin
• [U-Boot] [PATCH v1] net: mvneta - Fixed recv() when multiple packets have arrived.   Jason Brown
• [U-Boot] fs/fat: device not booting since conversion to dir iterators   Patrick Brünn
• [U-Boot] [RFC] Support for SGMII 2500   Madalin-cristian Bucur
• [U-Boot] [RFC] Support for SGMII 2500   Madalin-cristian Bucur
• [U-Boot] [RFC] Support for SGMII 2500   Madalin-cristian Bucur
• [U-Boot] [PATCH 0/3] MIPS: Caching fixes   Paul Burton
• [U-Boot] [PATCH 1/3] MIPS: Ensure cache ops complete in cache maintenance functions   Paul Burton
• [U-Boot] [PATCH 2/3] MIPS: Clear instruction hazards in flush_cache()   Paul Burton
• [U-Boot] [PATCH 3/3] MIPS: Break out of cache loops for unimplemented caches   Paul Burton
• [U-Boot] [PATCH 0/3] MIPS: Caching fixes   Paul Burton
• [U-Boot] [PATCH 0/8] boston: Ethernet support for MIPS Boston board   Paul Burton
• [U-Boot] [PATCH 1/8] pci: Make PCI bridge memory alignment configurable   Paul Burton
• [U-Boot] [PATCH 2/8] boston: Disable PCI bridge memory space alignment   Paul Burton
• [U-Boot] [PATCH 3/8] pci: xilinx: Initialise the root bridge during probe   Paul Burton
• [U-Boot] [PATCH 4/8] gpio: Provide dummy get/request & is_valid functions   Paul Burton
• [U-Boot] [PATCH 5/8] gpio: eg20t: Add driver for Intel EG20T GPIO controllers   Paul Burton
• [U-Boot] [PATCH 6/8] net: pch_gbe: Support PHY reset GPIOs   Paul Burton
• [U-Boot] [PATCH 7/8] net: pch_gbe: Use wait_for_bit() helper   Paul Burton
• [U-Boot] [PATCH 8/8] boston: Enable ethernet PHY, reset GPIO, device probe   Paul Burton
• [U-Boot] [PATCH] boston: Set CONFIG_SYS_LOAD_ADDR to 0x88000000   Paul Burton
• [U-Boot] [PATCH] boston: Add u-boot.mcs make target   Paul Burton
• [U-Boot] [PATCH v2] boston: Add u-boot.mcs make target   Paul Burton
• [U-Boot] sunxi: SATA link timeout fix   Werner Böllmann
• [U-Boot] [PATCH] mach-stm32: Fix mpu region's attribute for STM32H7   Patrice CHOTARD
• [U-Boot] [PATCH] mach-stm32: Fix mpu region's attribute for STM32H7   Patrice CHOTARD
• [U-Boot] [PATCH 0/2] Add clock support for designware net driver   Patrice CHOTARD
• [U-Boot] [PATCH] rockchip: config: update part table   Eddie Cai
• [U-Boot] [U-Boot,V9,1/4] usb: rockchip: add the rockusb gadget   Eddie Cai
• [U-Boot] [PATCH V10 0/4]introduce Rockchip rockusb   Eddie Cai
• [U-Boot] [PATCH V10 1/4] usb: rockchip: add the rockusb gadget   Eddie Cai
• [U-Boot] [PATCH V10 2/4] usb: rockchip: add rockusb command   Eddie Cai
• [U-Boot] [PATCH V10 3/4] rockchip:usb: add a simple readme for rockusb   Eddie Cai
• [U-Boot] [PATCH V10 4/4] rockchip: rk3288: enable rockusb support on rk3288 based device   Eddie Cai
• [U-Boot] u-boot Licensing exception with OpenSSL   Vagrant Cascadian
• [U-Boot] [PATCH v4 06/20] common: Generic firmware loader for file system   Chee, Tien Fong
• [U-Boot] [PATCH 1/2] common: Generic file system firmware loader   Chee, Tien Fong
• [U-Boot] [PATCH 1/2] common: Generic file system firmware loader   Chee, Tien Fong
• [U-Boot] [PATCH v5 07/18] socfpga: boot0 hook: adjust to unified boot0 semantics   Chee, Tien Fong
• [U-Boot] [PATCH 1/2] common: Generic file system firmware loader   Chee, Tien Fong
• [U-Boot] [PATCH 1/2] common: Generic file system firmware loader   Chee, Tien Fong
• [U-Boot] [PATCH 1/2] common: Generic file system firmware loader   Chee, Tien Fong
• [U-Boot] [PATCH 1/2] common: Generic file system firmware loader   Chee, Tien Fong
• [U-Boot] [PATCH 1/2] common: Generic file system firmware loader   Chee, Tien Fong
• [U-Boot] [PATCH 1/2] common: Generic file system firmware loader   Chee, Tien Fong
• [U-Boot] [PATCH] rockchip: config: update part table   Jacob Chen
• [U-Boot] [PATCH 00/10] rockchip: add tpl and OPTEE support for rk3229   Joseph Chen
• [U-Boot] [PATCH v3 0/4] Rename AE3XX timer to ATCPIT100   Rick Chen
• [U-Boot] [PATCH v3 1/4] ae3xx: timer: Rename AE3XX to ATCPIT100   Rick Chen
• [U-Boot] [PATCH v3 2/4] cosmetic: atcpit100_timer: Rename function name as atcpit100   Rick Chen
• [U-Boot] [PATCH v3 3/4] cosmetic: atcpit100_timer: Use device api to get platdata   Rick Chen
• [U-Boot] [PATCH v3 4/4] dt-bindings: timer: Add andestech atcpit100 timer   Rick Chen
• [U-Boot] [PATCH v3 0/4] Rename AE3XX timer to ATCPIT100   Rick Chen
• [U-Boot] [PATCH v3 1/4] ae3xx: timer: Rename AE3XX to ATCPIT100   Rick Chen
• [U-Boot] [PATCH v3 2/4] cosmetic: atcpit100_timer: Rename function name as atcpit100   Rick Chen
• [U-Boot] [PATCH v3 3/4] cosmetic: atcpit100_timer: Use device api to get platdata   Rick Chen
• [U-Boot] [PATCH v3 4/4] dt-bindings: timer: Add andestech atcpit100 timer   Rick Chen
• [U-Boot] [ANN] U-Boot v2017.11-rc4 released   Jaehoon Chung
• [U-Boot] mmc1 not working on Samsung snow chromebook   Jaehoon Chung
• [U-Boot] mmc1 not working on Samsung snow chromebook   Jaehoon Chung
• [U-Boot] sdhci - review?   Jaehoon Chung
• [U-Boot] [PATCH 0/5] mmc: fixes for HS200/UHS core support   Jaehoon Chung
• [U-Boot] sdhci - review?   Jaehoon Chung
• [U-Boot] [PATCH 0/5] mmc: fixes for HS200/UHS core support   Jaehoon Chung
• [U-Boot] [PATCH] mmc: sanitize includes for DM i2c   Jaehoon Chung
• [U-Boot] [PATCH] mmc: sdhci: don't clear SDHCI_INT_STATUS register during CMD_INHIBIT   Jaehoon Chung
• [U-Boot] [PATCH 1/1] mmc: sdhci: do not compare pointer to 0   Jaehoon Chung
• [U-Boot] [PATCH] mmc: sh_mmcif: RZ/A1 does not support HS mode   Jaehoon Chung
• [U-Boot] [GIT PULL] Please pull u-boot-mmc master   Jaehoon Chung
• [U-Boot] Problem with initialize in mmc_initialize in mmc.c   Jaehoon Chung
• [U-Boot] Problem with initialize in mmc_initialize in mmc.c   Jaehoon Chung
• [U-Boot] [GIT PULL] Please pull u-boot-mmc master   Jaehoon Chung
• [U-Boot] [PATCH] mmc: meson_gx_mmc: fix the complie error   Jaehoon Chung
• [U-Boot] [PATCH 0/5] mmc: fixes for HS200/UHS core support   Jaehoon Chung
• [U-Boot] Build failure in u-boot-mmc/master: undefined reference to error   Jaehoon Chung
• [U-Boot] [PATCH v2 2/4] mmc: dump card and host capabilities if debug is enabled   Jaehoon Chung
• [U-Boot] [PATCH v2 00/26] mmc: Add support for HS200 and UHS modes   Jaehoon Chung
• [U-Boot] [GIT PULL] Please pull u-boot-mmc master   Jaehoon Chung
• [U-Boot] [PATCH] arm: dts: exynos4: fix the device-tree compile warning   Jaehoon Chung
• [U-Boot] [GIT PULL] Please pull u-boot-mmc master   Jaehoon Chung
• [U-Boot] [GIT PULL] Please pull u-boot-mmc master   Jaehoon Chung
• [U-Boot] [PATCH] arm: dts: exynos4: fix the device-tree compile warning   Jaehoon Chung
• [U-Boot] [RFC] efi_loader: frame buffers in EFI GOP and DM_VIDEO   Rob Clark
• [U-Boot] [PATCH v2 01/18] efi_loader: efi_bootmgr: do not make hidden assignments   Rob Clark
• [U-Boot] [PATCH v2 01/18] efi_loader: efi_bootmgr: do not make hidden assignments   Rob Clark
• [U-Boot] [PATCH] efi_loader: add missing breaks   Rob Clark
• [U-Boot] [PATCH] efi_loader: initialise partition_signature memory   Rob Clark
• [U-Boot] u-boot hangs waiting for serial input   Dipanjan Das
• [U-Boot] Has versatilepb board support permanently been dropped in latest u-boot?   Dipanjan Das
• [U-Boot] u-boot hangs waiting for serial input   Dipanjan Das
• [U-Boot] Running u-boot on qemu-arm complains about missing ld.so.1   Dipanjan Das
• [U-Boot] Running u-boot on qemu-arm complains about missing ld.so.1   Dipanjan Das
• [U-Boot] [PATCH 00/10] rockchip: add tpl and OPTEE support for rk3229   Andrew F. Davis
• [U-Boot] [PATCH] disk: efi: correct the allocation size for mbr header in stack   Patrick Delaunay
• [U-Boot] ethernet: ROM MAC address vs env variable MAC address   Wolfgang Denk
• [U-Boot] password for u-boot   Wolfgang Denk
• [U-Boot] [PATCH v2 1/1] malloc: don't compare pointers to 0   Wolfgang Denk
• [U-Boot] [ANN] U-Boot v2017.11 is released   Wolfgang Denk
• [U-Boot] u-boot soft and hard ethernet addresses   Wolfgang Denk
• [U-Boot] [PATCH 1/1] vsprintf.c: add EFI device path printing   Wolfgang Denk
• [U-Boot] [PATCH 1/1] vsprintf.c: add EFI device path printing   Wolfgang Denk
• [U-Boot] [PATCH 1/1] vsprintf.c: add EFI device path printing   Wolfgang Denk
• [U-Boot] [PATCH 1/1] ubifs: avoid possible NULL dereference   Wolfgang Denk
• [U-Boot] [PATCH 1/1] ubifs: avoid possible NULL dereference   Wolfgang Denk
• [U-Boot] U-Boot proper(not SPL) relocate option   Wolfgang Denk
• [U-Boot] [PATCH 1/1] vsprintf.c: add EFI device path printing   Wolfgang Denk
• [U-Boot] [PATCH v2 1/1] vsprintf.c: add EFI device path printing   Wolfgang Denk
• [U-Boot] [PATCH 1/1] vsprintf.c: add EFI device path printing   Wolfgang Denk
• [U-Boot] [PATCH 1/1] vsprintf.c: add EFI device path printing   Wolfgang Denk
• [U-Boot] U-Boot proper(not SPL) relocate option   Wolfgang Denk
• [U-Boot] u-boot hangs waiting for serial input   Wolfgang Denk
• [U-Boot] [PATCH 00/23] imx: add i.MX8M support and i.MX8MQ EVK   Diego Dorta
• [U-Boot] [PATCH v2 1/5] SPL: fix printing of image name   André Draszik
• [U-Boot] [PATCH] board: sysam: stmark2: add missing environment location   Angelo Dureghello
• [U-Boot] [PATCH] m68k: doc: update outdated documentation   Angelo Dureghello
• [U-Boot] [RFC] mmc: fsl_esdhc: Do not set high speed mode on MX25 and MX51   Fabio Estevam
• [U-Boot] [PATCH v3 1/3] mx25: Move MX25 selection to Kconfig   Fabio Estevam
• [U-Boot] [PATCH v3 2/3] mx25: Select the ESDHC_A001 erratum   Fabio Estevam
• [U-Boot] [PATCH v3 3/3] mx51: Select the ESDHC_A001 erratum   Fabio Estevam
• [U-Boot] [RFC] mmc: fsl_esdhc: Do not set high speed mode on MX25 and MX51   Fabio Estevam
• [U-Boot] [PATCH v4 8/8] mx53: Add Board support for GE PPD   Fabio Estevam
• [U-Boot] [PATCH v3 1/3] mx25: Move MX25 selection to Kconfig   Fabio Estevam
• [U-Boot] [U-boot][SDP] Trigger watchdog before calling usb_gadget_handle_interrupts   Fabio Estevam
• [U-Boot] [PATCH] mx6: Fix imx6_is_bmode_from_gpr9 always returns 0   Fabio Estevam
• [U-Boot] [PATCH v3 1/3] mx25: Move MX25 selection to Kconfig   Fabio Estevam
• [U-Boot] [PATCH 4/6] pico-imx6ul: Define partition layout in the environment   Fabio Estevam
• [U-Boot] [PATCH 1/6] pico-imx6ul: Move dfu_alt_info to CONFIG_DFU_ENV_SETTINGS variable   Fabio Estevam
• [U-Boot] [PATCH 2/6] pico-imx6ul: Use PARTUUID to specify the rootfs location   Fabio Estevam
• [U-Boot] [PATCH 3/6] pico-imx6ul: Add boot and rootfs dfu_alt_info   Fabio Estevam
• [U-Boot] [PATCH 5/6] pico-imx6ul: Add function to create gpt partitions   Fabio Estevam
• [U-Boot] [PATCH 6/6] pico-imx6ul: Use FS_GENERIC load command   Fabio Estevam
• [U-Boot] [PATCH 1/2] mx6: Select MX6QDL option via Kconfig   Fabio Estevam
• [U-Boot] [PATCH 2/2] mx6sabreauto: Remove unneeded SPL selection   Fabio Estevam
• [U-Boot] [PATCH v2 2/6] pico-imx6ul: Use PARTUUID to specify the rootfs location   Fabio Estevam
• [U-Boot] [PATCH v2 4/6] pico-imx6ul: Define partition layout in the environment   Fabio Estevam
• [U-Boot] [PATCH] Revert "wandboard: Remove unnecessary delay"   Fabio Estevam
• [U-Boot] [PATCH] imx: Unify CONFIG_BOOTDELAY   Fabio Estevam
• [U-Boot] [PATCH 1/3] imx: Add a common way for detecting NXP boards revision   Fabio Estevam
• [U-Boot] [PATCH 2/3] mx6sxsabresd: Load the correct dtb for revA board   Fabio Estevam
• [U-Boot] [PATCH 3/3] mx6sxsabresd: Use PARTUUID to specify the rootfs location   Fabio Estevam
• [U-Boot] mx6ull evk reboots automatically   Fabio Estevam
• [U-Boot] mx6ull evk reboots automatically   Fabio Estevam
• [U-Boot] [PATCH 1/2] mx6ull: Fix WDOG3 base address   Fabio Estevam
• [U-Boot] [PATCH 2/2] imx: Also clear powerdown enable bit for WDOG3 on i.MX6ULL   Fabio Estevam
• [U-Boot] mx6ull evk reboots automatically   Fabio Estevam
• [U-Boot] [PATCH] imx: Remove boolean parameter from wdog powerdown function   Fabio Estevam
• [U-Boot] [PATCH] fat: Use cache aligned buffers for fat_opendir   Fabio Estevam
• [U-Boot] [PATCH] mx6_common: remove dead code   Fabio Estevam
• [U-Boot] [PATCH 1/3] imx: Add a common way for detecting NXP boards revision   Fabio Estevam
• [U-Boot] [PATCH v2 1/2] imx: Add a common way for detecting NXP boards revision   Fabio Estevam
• [U-Boot] [PATCH v2 2/2] mx6sxsabresd: Load the correct dtb for revA board   Fabio Estevam
• [U-Boot] [PATCH v3 1/2] imx: Add a common way for detecting NXP boards revision   Fabio Estevam
• [U-Boot] [PATCH v3 v2/2] mx6sxsabresd: Load the correct dtb for revA board   Fabio Estevam
• [U-Boot] [PATCH 1/5] mx6slevk: imximage.cfg: Handle the CONFIG_SECURE_BOOT case   Fabio Estevam
• [U-Boot] [PATCH 2/5] warp: imximage.cfg: Handle the CONFIG_SECURE_BOOT case   Fabio Estevam
• [U-Boot] [PATCH 3/5] mx6sl: Select MX6SL option via Kconfig   Fabio Estevam
• [U-Boot] [PATCH 4/5] Kconfig: mx6ull: Deselect MX6UL from CONFIG_MX6ULL   Fabio Estevam
• [U-Boot] [PATCH 5/5] imx: Kconfig: Add HAS_CAAM option   Fabio Estevam
• [U-Boot] [PATCH] usb: r8a66597: convert wait loop to readw_poll_timeout   Fabio Estevam
• [U-Boot] [PATCH v2] usb: r8a66597: convert wait loop to readw_poll_timeout   Fabio Estevam
• [U-Boot] [PATCH 0/4] net: phy: Add Broadcom BCM53xx switch driver   Florian Fainelli
• [U-Boot] [RFC] Support for SGMII 2500   Florian Fainelli
• [U-Boot] mx6ull evk reboots automatically   Peng Fan
• [U-Boot] [PATCH 1/2] mx6ull: Fix WDOG3 base address   Peng Fan
• [U-Boot] [PATCH 2/2] imx: Also clear powerdown enable bit for WDOG3 on i.MX6ULL   Peng Fan
• [U-Boot] [PATCH 1/5] mx6slevk: imximage.cfg: Handle the CONFIG_SECURE_BOOT case   Peng Fan
• [U-Boot] [PATCH 3/5] mx6sl: Select MX6SL option via Kconfig   Peng Fan
• [U-Boot] [PATCH] arm64 :show_regs: show the address before relocation   Peng Fan
• [U-Boot] [PATCH] arm: arm64: only use general regs   Peng Fan
• [U-Boot] [PATCH] armv8: mmu: fix page table mapping   Peng Fan
• [U-Boot] [PATCH] SPL: Add FIT data-position property support   Peng Fan
• [U-Boot] [PATCH 00/23] imx: add i.MX8M support and i.MX8MQ EVK   Peng Fan
• [U-Boot] [PATCH 01/23] imx: add i.MX8M into Kconfig   Peng Fan
• [U-Boot] [PATCH 02/23] imx: mx8m: add register definition header file   Peng Fan
• [U-Boot] [PATCH 03/23] imx: mx8m: add pin header file   Peng Fan
• [U-Boot] [PATCH 04/23] imx: mx8m: add clock driver   Peng Fan
• [U-Boot] [PATCH 05/23] imx: add sip function   Peng Fan
• [U-Boot] [PATCH 06/23] imx: boot_mode: add USB_BOOT entry   Peng Fan
• [U-Boot] [PATCH 07/23] imx: cpu: update cpu file to support i.MX8M   Peng Fan
• [U-Boot] [PATCH 08/23] imx: spl: implement spl_boot_device for i.MX8M   Peng Fan
• [U-Boot] [PATCH 09/23] power: pmic.h: include dm/ofnode.h   Peng Fan
• [U-Boot] [PATCH 10/23] imx: add i.MX8MQ SoC Revision and is_mx8m helper   Peng Fan
• [U-Boot] [PATCH 11/23] imx: add pad settings bit definition for i.MX8M   Peng Fan
• [U-Boot] [PATCH 12/23] imx: mx8m: add soc related settings and files   Peng Fan
• [U-Boot] [PATCH 13/23] imx: makefile: compile files for i.MX8M   Peng Fan
• [U-Boot] [PATCH 14/23] misc: ocotp: add i.MX8M support   Peng Fan
• [U-Boot] [PATCH 15/23] mmc: fsl_esdhc: support i.MX8M   Peng Fan
• [U-Boot] [PATCH 16/23] imx: lcdif: include i.MX8M   Peng Fan
• [U-Boot] [PATCH 17/23] gpio: mxc: add i.MX8M support   Peng Fan
• [U-Boot] [PATCH 18/23] imx: mx8m: add ddr register memory map   Peng Fan
• [U-Boot] [PATCH 19/23] net: fec: do not access reserved register for i.MX8M   Peng Fan
• [U-Boot] [PATCH 20/23] net: fec: fix build warnings for 64bits support   Peng Fan
• [U-Boot] [PATCH 21/23] power: pmic/regulator allow dm be omitted by SPL   Peng Fan
• [U-Boot] [PATCH 22/23] imx: imx8mq: add dtsi file   Peng Fan
• [U-Boot] [PATCH 23/23] imx: add i.MX8MQ EVK support   Peng Fan
• [U-Boot] [PATCH 00/23] imx: add i.MX8M support and i.MX8MQ EVK   Peng Fan
• [U-Boot] [PATCH 00/23] imx: add i.MX8M support and i.MX8MQ EVK   Peng Fan
• [U-Boot] [PATCH 01/23] imx: add i.MX8M into Kconfig   Peng Fan
• [U-Boot] [PATCH 02/23] imx: mx8m: add register definition header file   Peng Fan
• [U-Boot] [PATCH 04/23] imx: mx8m: add clock driver   Peng Fan
• [U-Boot] [PATCH 01/23] imx: add i.MX8M into Kconfig   Peng Fan
• [U-Boot] [PATCH 05/23] imx: add sip function   Peng Fan
• [U-Boot] [PATCH 08/23] imx: spl: implement spl_boot_device for i.MX8M   Peng Fan
• [U-Boot] [PATCH 12/23] imx: mx8m: add soc related settings and files   Peng Fan
• [U-Boot] [PATCH 12/23] imx: mx8m: add soc related settings and files   Peng Fan
• [U-Boot] [PATCH] scripts: spl: fix typo   Peng Fan
• [U-Boot] [PATCH 00/23] imx: add i.MX8M support and i.MX8MQ EVK   Peng Fan
• [U-Boot] [Replicant] FOSDEM Hardware Enablement Devroom   Fil
• [U-Boot] [PATCH] Convert CONFIG_SYS_NAND_ECCSIZE et al to Kconfig   Adam Ford
• [U-Boot] [PATCH] Kconfig: Migrate MTDIDS_DEFAULT / MTDPARTS_DEFAULT   Adam Ford
• [U-Boot] [PATCH] Convert CONFIG_SYS_NAND_ECCSIZE et al to Kconfig   Adam Ford
• [U-Boot] [PATCH] omap3: omap3_logic: Move pinmuxing to header file   Adam Ford
• [U-Boot] [PATCH] ARM: dts: Rename logicpd-toredp-37xx-devkit in U-Boot   Adam Ford
• [U-Boot] Convert CONFIG_SYS_NAND_ECCSIZE et al to Kconfig   Adam Ford
• [U-Boot] [PATCH] omap3_logic: Enable libfdt in SPL   Adam Ford
• [U-Boot] [PATCH] mx6_common: remove dead code   Adam Ford
• [U-Boot] [PATCH] omap3_logic: Enable libfdt in SPL   Adam Ford
• [U-Boot] [PATCH v2 1/1] add support for Raspberry Pi Zero W   Andreas Färber
• [U-Boot] [PATCH] arm: mvebu: fix boot from UART when in fallback mode   Andreas Färber
• [U-Boot] [PATCH u-boot] ARM: arch-meson: build memory banks using reported memory from registers   Andreas Färber
• [U-Boot] [PATCH v2 5/5] arm: Add Khadas VIM support based on Meson GXL family   Andreas Färber
• [U-Boot] [PATCH] arm64: mvebu: armada-7k/8k: drop useless #ifdef   Andreas Färber
• [U-Boot] U-Boot proper(not SPL) relocate option   Andreas Färber
• [U-Boot] [PATCH v2 1/5] ARM: arch-meson: add ethernet common init function   Beniamino Galvani
• [U-Boot] [PATCH 0/4] meson i2c driver cleanups   Beniamino Galvani
• [U-Boot] [PATCH 1/4] i2c: meson: improve Kconfig description   Beniamino Galvani
• [U-Boot] [PATCH 2/4] i2c: meson: reduce timeout   Beniamino Galvani
• [U-Boot] [PATCH 3/4] i2c: meson: fix return codes on error   Beniamino Galvani
• [U-Boot] [PATCH 4/4] i2c: meson: add some comments   Beniamino Galvani
• [U-Boot] [PATCH 1/2] i2c: add Amlogic Meson driver   Beniamino Galvani
• [U-Boot] mmc1 not working on Samsung snow chromebook   Guillaume Gardet
• [U-Boot] mmc1 not working on Samsung snow chromebook   Guillaume Gardet
• [U-Boot] mmc1 not working on Samsung snow chromebook   Guillaume Gardet
• [U-Boot] mmc1 not working on Samsung snow chromebook   Guillaume Gardet
• [U-Boot] mmc1 not working on Samsung snow chromebook   Guillaume Gardet
• [U-Boot] [PATCH 1/3] armv8: fsl-layerscape: SPL size reduction   Sumit Garg
• [U-Boot] [PATCH] driver: net: fsl-mc: flib changes for MC 10.3.0   Yogesh Gaur
• [U-Boot] [PATCH][v2] driver: net: fsl-mc: flib changes for MC 10.3.0   Yogesh Gaur
• [U-Boot] [PATCH][v3] driver: net: fsl-mc: flib changes for MC 10.3.0   Yogesh Gaur
• [U-Boot] [PATCH] driver: fsl-mc: MC object cleanup when DPL not loaded   Yogesh Gaur
• [U-Boot] Support of latest qemux86-64   Anton Gerasimov
• [U-Boot] Support of latest qemux86-64   Anton Gerasimov
• [U-Boot] Support of latest qemux86-64   Anton Gerasimov
• [U-Boot] Support of latest qemux86-64   Anton Gerasimov
• [U-Boot] Support of latest qemux86-64   Anton Gerasimov
• [U-Boot] Support of latest qemux86-64   Anton Gerasimov
• [U-Boot] Support of latest qemux86-64   Anton Gerasimov
• [U-Boot] [PATCH] Move Cache-As-RAM memory from area mapped to ROM in QEMU   Anton Gerasimov
• [U-Boot] Move Cache-As-RAM memory from area mapped to ROM in QEMU   Anton Gerasimov
• [U-Boot] [PATCH] Move Cache-As-RAM memory from area mapped to ROM in QEMU   Anton Gerasimov
• [U-Boot] [PATCH] dm: serial: Add .pre_probe() function to to wait for previous transmission end   Simon Glass
• [U-Boot] [PATCH] wget and enough TCP stack for fast netboot   Simon Glass
• [U-Boot] Revised NFS/TCP Tranfer measurement: Netboot Download times:: UDP vs TCP   Simon Glass
• [U-Boot] Test Environment   Simon Glass
• [U-Boot] Adding new net command   Simon Glass
• [U-Boot] Rainbow Screen of Death - Raspberry PI Current u-boot master   Simon Glass
• [U-Boot] [PATCH] MAINTAINERS: Update maintainer for USB xHCI   Simon Glass
• [U-Boot] [PATCH] Revert "console: simplify puts()"   Simon Glass
• [U-Boot] [PATCH 1/9] efi_loader: capitalize EFI_LOCATE_SEARCH_TYPE values   Simon Glass
• [U-Boot] [PATCH 2/9] efi_selftest: test protocol management   Simon Glass
• [U-Boot] [PATCH 3/9] efi_loader: eliminate efi_install_protocol_interface_ext   Simon Glass
• [U-Boot] [PATCH 4/9] efi_loader: eliminate efi_uninstall_protocol_interface_ext   Simon Glass
• [U-Boot] [PATCH 5/9] efi_loader: remove unused typedef for INTN   Simon Glass
• [U-Boot] [PATCH 6/9] efi_loader: replace UINTN by efi_uintn_t   Simon Glass
• [U-Boot] [PATCH 7/9] efi_loader: consistently use efi_uintn_t in boot services   Simon Glass
• [U-Boot] [PATCH 8/9] efi_loader: rework efi_locate_handle   Simon Glass
• [U-Boot] [PATCH 9/9] efi_loader: rework efi_search_obj   Simon Glass
• [U-Boot] [RFC] efi_loader: frame buffers in EFI GOP and DM_VIDEO   Simon Glass
• [U-Boot] about fdt-control   Simon Glass
• [U-Boot] U-Boot SPL/TPL build system   Simon Glass
• [U-Boot] Rockchip GRF/PMUGRF/CRU reg access in U-Boot   Simon Glass
• [U-Boot] [PATCH] clk: clk_stm32f7: fix PLL clock division factor   Simon Glass
• [U-Boot] [PATCH] arm: config: fix default console only to specify the device   Simon Glass
• [U-Boot] [PATCH] mmc-uclass: spl: upriv->mmc override by host descriptor address   Simon Glass
• [U-Boot] [PATCH] ata: Fix ahci wording   Simon Glass
• [U-Boot] [PATCH] scsi: ceva: Start port in probe   Simon Glass
• [U-Boot] [PATCH RFC] Makefile: Extend PYTHONPATH rather than overriding it   Simon Glass
• [U-Boot] [PATCH] dm: core: fix member name in ofnode_union documentation   Simon Glass
• [U-Boot] [PATCH 00/26] test: Include Python tools in test coverage   Simon Glass
• [U-Boot] [PATCH 01/26] binman: Add better Makefile debugging   Simon Glass
• [U-Boot] [PATCH 02/26] binman: Add docs explaining how to enable binman for a board   Simon Glass
• [U-Boot] [PATCH 03/26] binman: Add a Makefile for test-program compilation   Simon Glass
• [U-Boot] [PATCH 04/26] binman: Rename tests to ftest   Simon Glass
• [U-Boot] [PATCH 05/26] binman: Disable the no-unit_address_vs_reg warnings   Simon Glass
• [U-Boot] [PATCH 06/26] test/run: Report and return failure   Simon Glass
• [U-Boot] [PATCH 07/26] test: Run binman tests   Simon Glass
• [U-Boot] [PATCH 08/26] patman: Fix up tests to pass with newest checkpatch   Simon Glass
• [U-Boot] [PATCH 09/26] test: Run patman tests   Simon Glass
• [U-Boot] [PATCH 10/26] buildman: Allow skipping of tests which use the network   Simon Glass
• [U-Boot] [PATCH 11/26] buildman: Fix up tests   Simon Glass
• [U-Boot] [PATCH 12/26] test: Run buildman tests   Simon Glass
• [U-Boot] [PATCH 13/26] dtoc: Fix up tests   Simon Glass
• [U-Boot] [PATCH 14/26] test: Run dtoc tests   Simon Glass
• [U-Boot] [PATCH 15/26] binman: Append to PYTHONPATH when running test coverage   Simon Glass
• [U-Boot] [PATCH 16/26] binman: Set up 'entry' to permit full test coverage   Simon Glass
• [U-Boot] [PATCH 17/26] binman: Add tests for importlib availability   Simon Glass
• [U-Boot] [PATCH 18/26] binman: Add a main program to the tests   Simon Glass
• [U-Boot] [PATCH 19/26] binman: Increase test coverage back to 100%   Simon Glass
• [U-Boot] [PATCH 20/26] binman: Check for files missing from test coverage   Simon Glass
• [U-Boot] [PATCH 21/26] binman: Add test for u-boot-spl-bss-pad   Simon Glass
• [U-Boot] [PATCH 22/26] binman: Add a test for x86-start16-spl   Simon Glass
• [U-Boot] [PATCH 23/26] binman: Add add test for SPL with a microcode pointer   Simon Glass
• [U-Boot] [PATCH 24/26] binman: Add add test for using an Intel MRC binary   Simon Glass
• [U-Boot] [PATCH 25/26] binman: Return non-zero exit code on test failure   Simon Glass
• [U-Boot] [PATCH 26/26] RFC: binman: Run code coverage tests   Simon Glass
• [U-Boot] [PATCH 00/13] binman: Support run-time access to binman image positions   Simon Glass
• [U-Boot] [PATCH 01/13] binman: Add a function to read ELF symbols   Simon Glass
• [U-Boot] [PATCH 02/13] binman: Add support for including spl/u-boot-spl.dtb   Simon Glass
• [U-Boot] [PATCH 03/13] binman: Add support for including spl/u-boot-spl-nodtb.bin   Simon Glass
• [U-Boot] [PATCH 04/13] binman: Drop a stale comment about the 'board' feature   Simon Glass
• [U-Boot] [PATCH 05/13] binman: Add tests binaries with binman symbols   Simon Glass
• [U-Boot] [PATCH 06/13] binman: Adjust size of test SPL binary   Simon Glass
• [U-Boot] [PATCH 07/13] binman: Support enabling debug in tests   Simon Glass
• [U-Boot] [PATCH 08/13] binman: Support accessing binman tables at run time   Simon Glass
• [U-Boot] [PATCH 09/13] binman: arm: Include the binman symbol table   Simon Glass
• [U-Boot] [PATCH 10/13] binman: Add binman symbol support to SPL   Simon Glass
• [U-Boot] [PATCH 11/13] binman: Add binman support to spl_ram.c   Simon Glass
• [U-Boot] [PATCH 12/13] binman: Add documentation for the symbol feature   Simon Glass
• [U-Boot] [PATCH 13/13] binman: tegra: Convert to use binman   Simon Glass
• [U-Boot] [PATCH v2 1/5] SPL: fix printing of image name   Simon Glass
• [U-Boot] [PATCH v2 2/5] tpm: fix reading of permanent flags   Simon Glass
• [U-Boot] [PATCH 4/5] tpm: add more useful NV storage permission flags   Simon Glass
• [U-Boot] [PATCH v2 3/5] tpm: add tpm_get_random()   Simon Glass
• [U-Boot] [PATCH v2 5/5] tpm: add more missing va_end()   Simon Glass
• [U-Boot] [PATCH 1/1] x86: don't compare pointers to 0   Simon Glass
• [U-Boot] [PATCH 1/1] Makefile: add coccicheck target   Simon Glass
• [U-Boot] [PATCH v2 01/18] efi_loader: efi_bootmgr: do not make hidden assignments   Simon Glass
• [U-Boot] [PATCH v2 02/18] efi_loader: size of media device path node represenation   Simon Glass
• [U-Boot] [PATCH v2 03/18] efi_loader: efi_dp_str should print path not node   Simon Glass
• [U-Boot] [PATCH v2 04/18] efi_loader: fix efi_convert_device_node_to_text   Simon Glass
• [U-Boot] [PATCH v2 05/18] efi_loader: reimplement LocateDevicePath   Simon Glass
• [U-Boot] [PATCH v2 06/18] efi_selftest: test EFI_DEVICE_PATH_TO_TEXT_PROTOCOL   Simon Glass
• [U-Boot] [PATCH v2 07/18] efi_loader: efi_disk: use efi_add_protocol   Simon Glass
• [U-Boot] [PATCH v2 08/18] efi_loader: efi_net: use efi_add_protocol   Simon Glass
• [U-Boot] [PATCH v2 09/18] efi_loader: efi_gop: use efi_add_protocol   Simon Glass
• [U-Boot] [PATCH v2 10/18] efi_loader: simplify efi_open_protocol   Simon Glass
• [U-Boot] [PATCH v2 11/18] efi_loader: simplify find_obj   Simon Glass
• [U-Boot] [PATCH v2 12/18] efi_loader: manage protocols in a linked list   Simon Glass
• [U-Boot] [PATCH v2 13/18] efi_selftest: compile without special compiler flags   Simon Glass
• [U-Boot] [PATCH v2 14/18] efi_selftest: add missing line feed   Simon Glass
• [U-Boot] [PATCH v2 15/18] efi_loader: output load options in helloworld   Simon Glass
• [U-Boot] [PATCH v2 16/18] test/py: check return code of helloworld   Simon Glass
• [U-Boot] [PATCH v2 17/18] efi_loader: pass handle of loaded image   Simon Glass
• [U-Boot] [PATCH v2 18/18] efi_loader: helper function to add EFI object to list   Simon Glass
• [U-Boot] [PATCH v4 12/18] efi_selftest: correctly cleanup after selftest   Simon Glass
• [U-Boot] [PATCH v4 12/18] efi_selftest: allow to select a single test for exexution   Simon Glass
• [U-Boot] [PATCH v2 2/9] efi_selftest: test protocol management   Simon Glass
• [U-Boot] [PATCH v2 7/9] efi_loader: consistently use efi_uintn_t in boot services   Simon Glass
• [U-Boot] [PATCH v2 3/5] tpm: add tpm_get_random()   Simon Glass
• [U-Boot] [PATCH v2 04/18] rockchip: grf_rv1108.h: Fix the grf offsets   Simon Glass
• [U-Boot] [PATCH 1/2] i2c: add Amlogic Meson driver   Simon Glass
• [U-Boot] "usb storage" command issues   Simon Glass
• [U-Boot] [PATCH V3] usb: xhci: Add Renesas R-Car xHCI driver   Simon Glass
• [U-Boot] [PATCH 9/9] arm: zynq: Add board support for cc108   Simon Glass
• [U-Boot] [PATCH 2/2] rk3288: tinker: Add falcon mode support   Simon Glass
• [U-Boot] [PATCH 3/5] arm: zynq: Move ZYNQ_SERIAL to Kconfig   Simon Glass
• [U-Boot] [PATCH 4/5] arm: zynq: Sort dts names   Simon Glass
• [U-Boot] [PATCH 5/5] arm: zynq: Add mini u-boot configuration for zynq   Simon Glass
• [U-Boot] [PATCH 04/11] tools: mkimage: Extend mkimage to also include pmufw   Simon Glass
• [U-Boot] [PATCH] lib: sha1: Change uint8_t to unsigned char for sha1_der_prefix array.   Simon Glass
• [U-Boot] [PATCH] power: pmic/regulator: Add basic support for TPS65910   Simon Glass
• [U-Boot] [PATCH v2 00/18] Add gmac support for rk3399-evb rv1108-evb rk3328-evb and rk3229-evb   Simon Glass
• [U-Boot] [PATCH] rockchip: update boot0 hook   Simon Glass
• [U-Boot] [PATCH] arm: zynq: Remove double const qualifier   Simon Glass
• [U-Boot] [PATCH] fpga: allow programming fpga from FIT image for all FPGA drivers   Simon Glass
• [U-Boot] [PATCH] Makefile: Correct SPL/TPL/DTB build race condition   Simon Glass
• [U-Boot] [PATCH v5 3/3] ARM: dra7: Kconfig: Add thermal configs for dra7xx and am57xx   Simon Glass
• [U-Boot] [PATCH] envtools: make sure version/timestamp header file are available   Simon Glass
• [U-Boot] [PATCH] ae3xx: timer: Fix ae3xx timer work abnormal in 64 bit.   Simon Glass
• [U-Boot] [PATCH 1/3] ae3xx: timer: Rename AE3XX to ATCPIT100   Simon Glass
• [U-Boot] [PATCH 3/3] dt-bindings: timer: Add andestech atcpit100 timer binding doc   Simon Glass
• [U-Boot] [PATCH 2/3] nds32: defconfig: Rename AE3XX_TIMER to ATCPIT100_TIMER   Simon Glass
• [U-Boot] [PATCH] atcpit100: timer: Remove arch dependency.   Simon Glass
• [U-Boot] [PATCH] x86: lib: Implement standalone __udivdi3 etc instead of libgcc ones   Simon Glass
• [U-Boot] [PATCH v3 1/6] x86: baytrail: Add fsp-header verification for secure boot FSP   Simon Glass
• [U-Boot] [PATCH v3 2/6] x86: baytrail: secureboot: Add functions for verification of U-Boot   Simon Glass
• [U-Boot] [PATCH v3 3/6] x86: congatec: add secureboot enabled defconfig for conga-qeval20-qa3-e3845   Simon Glass
• [U-Boot] [PATCH v3 4/6] binman: add optional support for U-Boot image signing   Simon Glass
• [U-Boot] [PATCH v3 5/6] binman: add ROM image signing for Bay Trail SoC   Simon Glass
• [U-Boot] [PATCH v3 6/6] doc: x86: Add section about secure boot on Bay Trail   Simon Glass
• [U-Boot] [PATCH v3 00/14] log: Add a new logging feature   Simon Glass
• [U-Boot] [PATCH v3 01/14] Revert "sandbox: remove os_putc() and os_puts()"   Simon Glass
• [U-Boot] [PATCH v3 02/14] sandbox: Adjust pre-console address to avoid conflict   Simon Glass
• [U-Boot] [PATCH v3 03/14] Revert "sandbox: Drop special case console code for sandbox"   Simon Glass
• [U-Boot] [PATCH v3 04/14] Move debug and logging support to a separate header   Simon Glass
• [U-Boot] [PATCH v3 05/14] mtdparts: Correct use of debug()   Simon Glass
• [U-Boot] [PATCH v3 06/14] Drop the log buffer   Simon Glass
• [U-Boot] [PATCH v3 07/14] log: Add an implemention of logging   Simon Glass
• [U-Boot] [PATCH v3 08/14] log: Add a console driver   Simon Glass
• [U-Boot] [PATCH v3 09/14] log: Add a 'log level' command   Simon Glass
• [U-Boot] [PATCH v3 10/14] log: Add a test command   Simon Glass
• [U-Boot] [PATCH v3 11/14] log: Plumb logging into the init sequence   Simon Glass
• [U-Boot] [PATCH v3 12/14] log: sandbox: Enable logging   Simon Glass
• [U-Boot] [PATCH v3 13/14] log: test: Add a pytest for logging   Simon Glass
• [U-Boot] [PATCH v3 14/14] log: Add documentation   Simon Glass
• [U-Boot] [PATCH v2 06/18] efi_selftest: test EFI_DEVICE_PATH_TO_TEXT_PROTOCOL   Simon Glass
• [U-Boot] [PATCH v2 1/1] Makefile: add coccicheck target   Simon Glass
• [U-Boot] [PATCH u-boot 1/2] arm: Add LibreTech CC support based on Meson GXL family   Simon Glass
• [U-Boot] [PATCH u-boot 2/2] arm: Add Khadas VIM support based on Meson GXL family   Simon Glass
• [U-Boot] Please pull u-boot-dm   Simon Glass
• [U-Boot] [PATCH v3 07/14] log: Add an implemention of logging   Simon Glass
• [U-Boot] [PATCH u-boot] ARM: arch-meson: build memory banks using reported memory from registers   Simon Glass
• [U-Boot] [PATCH v2 1/5] ARM: arch-meson: add ethernet common init function   Simon Glass
• [U-Boot] [PATCH v2 2/5] board: odroid-c2: use common ethernet init function   Simon Glass
• [U-Boot] [PATCH v2 3/5] board: p212: use common ethernet init function   Simon Glass
• [U-Boot] [PATCH v2 4/5] arm: Add LibreTech CC support based on Meson GXL family   Simon Glass
• [U-Boot] [PATCH v2 5/5] arm: Add Khadas VIM support based on Meson GXL family   Simon Glass
• [U-Boot] [PATCH] fpga: allow programming fpga from FIT image for all FPGA drivers   Simon Glass
• [U-Boot] dm: mmc: fsl_esdhc: Drop mmc_init() call from fsl_esdhc_init()   Simon Glass
• [U-Boot] [PATCH] atcpit100: timer: Remove arch dependency.   Simon Glass
• [U-Boot] [PATCH 5/5] arm: zynq: Add mini u-boot configuration for zynq   Simon Glass
• [U-Boot] [PATCH 1/3] ae3xx: timer: Rename AE3XX to ATCPIT100   Simon Glass
• [U-Boot] [PATCH v2 04/11] tools: mkimage: Extend mkimage to also include pmufw   Simon Glass
• [U-Boot] [PATCH] env: suppress a spurious warning with GCC 7.1   Simon Glass
• [U-Boot] [PATCH 1/5] dm: mmc: updated mmc_of_parse() to not fail because of an invalid bus-width   Simon Glass
• [U-Boot] [PATCH 2/5] mmc: dm: support "mmc-ddr-1_2v" and "mmc-hs200-1_2v" boolean properties   Simon Glass
• [U-Boot] [PATCH 3/5] mmc: dump card and host capabilities if debug is enabled   Simon Glass
• [U-Boot] [PATCH 4/5] mmc: Fixed a problem with old sd or mmc that do not support High speed   Simon Glass
• [U-Boot] [PATCH 5/5] mmc: all hosts support 1-bit bus width and legacy timings   Simon Glass
• [U-Boot] [PATCH 0/5] test: Add compression tests to pytest   Simon Glass
• [U-Boot] [PATCH 1/5] test: Add a command function for test execution   Simon Glass
• [U-Boot] [PATCH 2/5] test: overlay: Use cmd_ut_category()   Simon Glass
• [U-Boot] [PATCH 3/5] test: compression: Put test variables in a struct   Simon Glass
• [U-Boot] [PATCH 4/5] test/py: Allow any unit test suite to be found   Simon Glass
• [U-Boot] [PATCH 5/5] test: compression: Convert to unit test framework   Simon Glass
• [U-Boot] U-Boot proper(not SPL) relocate option   Simon Glass
• [U-Boot] [PATCH v2 0/5] Add support for Amlogic GXL Based SBCs   Simon Glass
• [U-Boot] [PATCH 1/1] vsprintf.c: add EFI device path printing   Simon Glass
• [U-Boot] [PATCH 00/13] binman: Support run-time access to binman image positions   Simon Glass
• [U-Boot] U-Boot proper(not SPL) relocate option   Simon Glass
• [U-Boot] [PATCH] spl: make CONFIG_OF_EMBED pass dts through fdtgrep   Simon Glass
• [U-Boot] [PATCH v2 1/3] ae3xx: timer: Rename AE3XX to ATCPIT100   Simon Glass
• [U-Boot] [PATCH] lib: sha1: Change uint8_t to unsigned char for sha1_der_prefix array.   Simon Glass
• [U-Boot] [PATCH v2 1/2] power: regulator: add driver for the FAN53555 family   Simon Glass
• [U-Boot] [PATCH] power: pmic/regulator: Add basic support for TPS65910   Simon Glass
• [U-Boot] [PATCH v2] drivers: core: Add translation in live tree case   Simon Glass
• [U-Boot] [PATCH] dm: reset: have the reset-command perform a COLD reset   Simon Glass
• [U-Boot] [PATCH 1/1] distro bootcmd: define bootloader name for x86   Simon Glass
• [U-Boot] [PATCH 1/1] vsprintf.c: add EFI device path printing   Simon Glass
• [U-Boot] [PATCH v2 1/5] ARM: arch-meson: add ethernet common init function   Simon Glass
• [U-Boot] [PATCH] power: pmic/regulator: Add basic support for TPS65910   Simon Glass
• [U-Boot] [PATCH v2 1/2] power: regulator: add driver for the FAN53555 family   Simon Glass
• [U-Boot] [PATCH v2 0/7] test: Include Python tools in test coverage   Simon Glass
• [U-Boot] [PATCH v2 1/7] test: Correct operation when tests pass   Simon Glass
• [U-Boot] [PATCH v2 2/7] test: Run binman tests   Simon Glass
• [U-Boot] [PATCH v2 3/7] test: Run patman tests   Simon Glass
• [U-Boot] [PATCH v2 4/7] test: Run buildman tests   Simon Glass
• [U-Boot] [PATCH v2 5/7] test: Run dtoc tests   Simon Glass
• [U-Boot] [PATCH v2 6/7] travis.yml: Run tests for tools   Simon Glass
• [U-Boot] [PATCH v2 7/7] binman: Run code coverage tests   Simon Glass
• [U-Boot] [PATCH v3 00/18] efi_loader: manage protocols in a linked list (v3)   Simon Glass
• [U-Boot] [PATCH 1/4] i2c: meson: improve Kconfig description   Simon Glass
• [U-Boot] [PATCH 2/4] i2c: meson: reduce timeout   Simon Glass
• [U-Boot] [PATCH 3/4] i2c: meson: fix return codes on error   Simon Glass
• [U-Boot] [PATCH 4/4] i2c: meson: add some comments   Simon Glass
• [U-Boot] [PATCH 1/2] i2c: add Amlogic Meson driver   Simon Glass
• [U-Boot] [PATCH] MAINTAINERS: update maintained files for Rockchip   Simon Glass
• [U-Boot] [PATCH 1/2] rockchip: rk3399-puma: add code to allow forcing a power-on reset   Simon Glass
• [U-Boot] [PATCH v2 1/3] ae3xx: timer: Rename AE3XX to ATCPIT100   Simon Glass
• [U-Boot] [PATCH v2 2/3] cosmetic: atcpit100_timer: Rename function name as atcpit100   Simon Glass
• [U-Boot] [PATCH 1/2] libfdt: move fdt_find_regions() to fdt_region.c from fdt_wip.c   Simon Glass
• [U-Boot] [PATCH 2/2] libfdt: migrate fdt_wip.c to a wrapper of scripts/dtc/libfdt/fdt_wip.c   Simon Glass
• [U-Boot] [PATCH v3] power: extend prefix match to regulator-name property   Simon Glass
• [U-Boot] [PATCH v2 1/5] ARM: arch-meson: add ethernet common init function   Simon Glass
• [U-Boot] [PATCH u-boot v2] ARM: arch-meson: build memory banks using reported memory from registers   Simon Glass
• [U-Boot] [PATCH v2 1/4] dm: mmc: update mmc_of_parse()   Simon Glass
• [U-Boot] [PATCH v2 3/4] mmc: Fixed a problem with old sd or mmc that do not support High speed   Simon Glass
• [U-Boot] [PATCH v2 4/4] mmc: all hosts support 1-bit bus width and legacy timings   Simon Glass
• [U-Boot] U-Boot proper(not SPL) relocate option   Simon Glass
• [U-Boot] [PATCH] power: pmic/regulator: Add basic support for TPS65910   Simon Glass
• [U-Boot] [PATCH] test/run: Exit on error from tests   Simon Glass
• [U-Boot] [PATCH] test/run: Exit on error from tests   Simon Glass
• [U-Boot] [PATCH 1/2] rockchip: rk3399-puma: add code to allow forcing a power-on reset   Simon Glass
• [U-Boot] [PATCH] arm64 :show_regs: show the address before relocation   Simon Glass
• [U-Boot] [PATCH] arm: arm64: only use general regs   Simon Glass
• [U-Boot] [PATCH v3 3/4] cosmetic: atcpit100_timer: Use device api to get platdata   Simon Glass
• [U-Boot] [PATCH] SPL: Add FIT data-position property support   Simon Glass
• [U-Boot] [PATCH v3 1/4] dm: mmc: update mmc_of_parse()   Simon Glass
• [U-Boot] "usb storage" command issues   Simon Glass
• [U-Boot] [PATCH 4/5] treewide: convert assert() to BUG_ON()   Simon Glass
• [U-Boot] [PATCH v3 2/4] cosmetic: atcpit100_timer: Rename function name as atcpit100   Simon Glass
• [U-Boot] [PATCH] binman: do not add binary files to git   Simon Glass
• [U-Boot] [PATCH v2] power: pmic/regulator: Add basic support for TPS65910   Simon Glass
• [U-Boot] [PATCH] fdtdec: Support parsing multiple /memory nodes   Simon Glass
• [U-Boot] [PATCH 13/13] binman: tegra: Convert to use binman   Simon Glass
• [U-Boot] [U-Boot,v3,10/14] log: Add a test command   Simon Glass
• [U-Boot] powerpc 4xx support   Cédric Le Goater
• [U-Boot] [RFC] efi_loader: frame buffers in EFI GOP and DM_VIDEO   Alexander Graf
• [U-Boot] [PATCH v4 12/18] efi_selftest: correctly cleanup after selftest   Alexander Graf
• [U-Boot] [PATCH 17/18] efi_loader: refactor efi_setup_loaded_image   Alexander Graf
• [U-Boot] [PATCH 01/13] efi_loader: efi_bootmgr: do not make hidden assignments   Alexander Graf
• [U-Boot] [PATCH 1/1] efi_loader: manage protocols in a linked list   Alexander Graf
• [U-Boot] [PATCH 12/13] efi_loader: manage protocols in a linked list   Alexander Graf
• [U-Boot] [PATCH 3/4] sunxi: Add default partition scheme   Alexander Graf
• [U-Boot] [PATCH 3/4] sunxi: Add default partition scheme   Alexander Graf
• [U-Boot] [PATCH 3/4] sunxi: Add default partition scheme   Alexander Graf
• [U-Boot] [PATCH] efi_loader: Fix disk dp's for pre-DM/legacy devices   Jonathan Gray
• [U-Boot] [PATCH] efi_loader: Fix disk dp's for pre-DM/legacy devices   Jonathan Gray
• [U-Boot] [PATCH] efi_loader: Fix disk dp's for pre-DM/legacy devices   Jonathan Gray
• [U-Boot] [PATCH] efi_loader: initialise partition_signature memory   Jonathan Gray
• [U-Boot] [PATCH v2] efi_loader: initialise partition_signature memory   Jonathan Gray
• [U-Boot] [PATCH] efi_loader: initialise partition_signature memory   Jonathan Gray
• [U-Boot] [PATCH] disk: part_dos: fix part_get_info_extended() function   Shawn Guo
• [U-Boot] [PATCH 3/3] x86: baytrail: secureboot: Add functions for verification of U-Boot   Anatolij Gustschin
• [U-Boot] [PATCH v3 0/6] Introduce secure boot for Bay Trail   Anatolij Gustschin
• [U-Boot] [PATCH v3 1/6] x86: baytrail: Add fsp-header verification for secure boot FSP   Anatolij Gustschin
• [U-Boot] [PATCH v3 2/6] x86: baytrail: secureboot: Add functions for verification of U-Boot   Anatolij Gustschin
• [U-Boot] [PATCH v3 3/6] x86: congatec: add secureboot enabled defconfig for conga-qeval20-qa3-e3845   Anatolij Gustschin
• [U-Boot] [PATCH v3 4/6] binman: add optional support for U-Boot image signing   Anatolij Gustschin
• [U-Boot] [PATCH v3 5/6] binman: add ROM image signing for Bay Trail SoC   Anatolij Gustschin
• [U-Boot] [PATCH v3 6/6] doc: x86: Add section about secure boot on Bay Trail   Anatolij Gustschin
• [U-Boot] [PATCH] x86: conga-qeval20-qa3-e3845: Adjust VGA rom address   Anatolij Gustschin
• [U-Boot] [PATCH] Revert "x86: bootm: Fix FIT image booting on x86"   Anatolij Gustschin
• [U-Boot] [PATCH v3 1/6] x86: baytrail: Add fsp-header verification for secure boot FSP   Anatolij Gustschin
• [U-Boot] [PATCH v3 4/6] binman: add optional support for U-Boot image signing   Anatolij Gustschin
• [U-Boot] [PATCH v3 5/6] binman: add ROM image signing for Bay Trail SoC   Anatolij Gustschin
• [U-Boot] [PATCH v3 2/6] x86: baytrail: secureboot: Add functions for verification of U-Boot   Anatolij Gustschin
• [U-Boot] [PATCH] sunxi: video: HDMI: split VSYNC and HSYNC polarity settings   Anatolij Gustschin
• [U-Boot] [PATCH] TCP and wget implementation.   Duncan Hare
• [U-Boot] u-boot soft and hard ethernet addresses   Duncan Hare
• [U-Boot] Fw: u-boot soft and hard ethernet addresses   Duncan Hare
• [U-Boot] [PATCH] TCP and wget implementation.   Duncan Hare
• [U-Boot] [PATCH v2 0/5] mmc: omap_hsmmc: Add support for ADMA   Jean-Jacques Hiblot
• [U-Boot] [PATCH 0/5] mmc: fixes for HS200/UHS core support   Jean-Jacques Hiblot
• [U-Boot] [PATCH 1/5] dm: mmc: updated mmc_of_parse() to not fail because of an invalid bus-width   Jean-Jacques Hiblot
• [U-Boot] [PATCH 2/5] mmc: dm: support "mmc-ddr-1_2v" and "mmc-hs200-1_2v" boolean properties   Jean-Jacques Hiblot
• [U-Boot] [PATCH 3/5] mmc: dump card and host capabilities if debug is enabled   Jean-Jacques Hiblot
• [U-Boot] [PATCH 4/5] mmc: Fixed a problem with old sd or mmc that do not support High speed   Jean-Jacques Hiblot
• [U-Boot] [PATCH 5/5] mmc: all hosts support 1-bit bus width and legacy timings   Jean-Jacques Hiblot
• [U-Boot] [PATCH 0/5] mmc: fixes for HS200/UHS core support   Jean-Jacques Hiblot
• [U-Boot] [PATCH 5/5] mmc: all hosts support 1-bit bus width and legacy timings   Jean-Jacques Hiblot
• [U-Boot] [PATCH v2 0/4] mmc: fixes for HS200/UHS core support   Jean-Jacques Hiblot
• [U-Boot] [PATCH v2 1/4] dm: mmc: update mmc_of_parse()   Jean-Jacques Hiblot
• [U-Boot] [PATCH v2 2/4] mmc: dump card and host capabilities if debug is enabled   Jean-Jacques Hiblot
• [U-Boot] [PATCH v2 3/4] mmc: Fixed a problem with old sd or mmc that do not support High speed   Jean-Jacques Hiblot
• [U-Boot] [PATCH v2 4/4] mmc: all hosts support 1-bit bus width and legacy timings   Jean-Jacques Hiblot
• [U-Boot] [PATCH v2 1/4] dm: mmc: update mmc_of_parse()   Jean-Jacques Hiblot
• [U-Boot] [PATCH v2 2/4] mmc: dump card and host capabilities if debug is enabled   Jean-Jacques Hiblot
• [U-Boot] [PATCH v3 0/4] mmc: fixes for HS200/UHS core support   Jean-Jacques Hiblot
• [U-Boot] [PATCH v3 1/4] dm: mmc: update mmc_of_parse()   Jean-Jacques Hiblot
• [U-Boot] [PATCH v3 2/4] mmc: dump card and host capabilities if debug is enabled   Jean-Jacques Hiblot
• [U-Boot] [PATCH v3 3/4] mmc: Fixed a problem with old sd or mmc that do not support High speed   Jean-Jacques Hiblot
• [U-Boot] [PATCH v3 4/4] mmc: all hosts support 1-bit bus width and legacy timings   Jean-Jacques Hiblot
• [U-Boot] [GIT PULL] Please pull u-boot-mmc master   Jean-Jacques Hiblot
• [U-Boot] [PATCH v4 00/10] mmc: fixes for HS200/UHS core support   Jean-Jacques Hiblot
• [U-Boot] [PATCH v4 01/10] mmc: dump card and host capabilities if debug is enabled   Jean-Jacques Hiblot
• [U-Boot] [PATCH v4 02/10] dm: mmc: update mmc_of_parse()   Jean-Jacques Hiblot
• [U-Boot] [PATCH v4 03/10] mmc: Fixed a problem with old sd or mmc that do not support High speed   Jean-Jacques Hiblot
• [U-Boot] [PATCH v4 04/10] mmc: all hosts support 1-bit bus width and legacy timings   Jean-Jacques Hiblot
• [U-Boot] [PATCH v4 05/10] mmc: fix for old MMCs (below version 4)   Jean-Jacques Hiblot
• [U-Boot] [PATCH v4 06/10] mmc: don't use malloc_cache_aligned()   Jean-Jacques Hiblot
• [U-Boot] [PATCH v4 07/10] mmc: allow to compile out the error messages   Jean-Jacques Hiblot
• [U-Boot] [PATCH v4 08/10] mmc: make UHS and HS200 optional   Jean-Jacques Hiblot
• [U-Boot] [PATCH v4 09/10] mmc: make optional the support for eMMMC hardware partitioning   Jean-Jacques Hiblot
• [U-Boot] [PATCH v5 00/11] mmc: fixes for HS200/UHS core support   Jean-Jacques Hiblot
• [U-Boot] [PATCH v5 01/11] mmc: dump card and host capabilities if debug is enabled   Jean-Jacques Hiblot
• [U-Boot] [PATCH v5 02/11] dm: mmc: update mmc_of_parse()   Jean-Jacques Hiblot
• [U-Boot] [PATCH v5 03/11] mmc: Fixed a problem with old sd or mmc that do not support High speed   Jean-Jacques Hiblot
• [U-Boot] [PATCH v5 04/11] mmc: all hosts support 1-bit bus width and legacy timings   Jean-Jacques Hiblot
• [U-Boot] [PATCH v5 05/11] mmc: fix for old MMCs (below version 4)   Jean-Jacques Hiblot
• [U-Boot] [PATCH v5 06/11] mmc: don't use malloc_cache_aligned()   Jean-Jacques Hiblot
• [U-Boot] [PATCH v5 07/11] mmc: convert most of printf() to pr_err() and pr_warn()   Jean-Jacques Hiblot
• [U-Boot] [PATCH v5 08/11] mmc: make UHS and HS200 optional   Jean-Jacques Hiblot
• [U-Boot] [PATCH v5 09/11] mmc: make optional the support for eMMC hardware partitioning   Jean-Jacques Hiblot
• [U-Boot] [PATCH v5 10/11] configs: openrd: removed support for eMMC hardware partitioning   Jean-Jacques Hiblot
• [U-Boot] [PATCH v5 11/11] configs: omapl138_lcdk: decrease the loglevel to reduce the size of the SPL   Jean-Jacques Hiblot
• [U-Boot] [PATCH v2 1/1] malloc: don't compare pointers to 0   Jeroen Hofstee
• [U-Boot] [OE-core] [PATCH] u-boot: Upgrade to 2017.11 release   Jeroen Hofstee
• [U-Boot] [PATCH v5 11/11] configs: omapl138_lcdk: decrease the loglevel to reduce the size of the SPL   Peter Howard
• [U-Boot] [PATCH 1/4] arm64: ls1043ardb: Add sd_bootcmd for distro fallback in case of sdboot   Mingkai Hu
• [U-Boot] [PATCH] clk: rmobile: Add R8A7796 xHCI clock   Nobuhiro Iwamatsu
• [U-Boot] [PATCH] net: ravb: Fix reset GPIO handling   Nobuhiro Iwamatsu
• [U-Boot] Where should Renesas RZ/A go under arch/arm/ ????   Nobuhiro Iwamatsu
• [U-Boot] [PATCH v2 1/3] net: sh-eth: fix inl and outl definitions   Nobuhiro Iwamatsu
• [U-Boot] [PATCH v2 3/3] net: miiphybb: fix casting error   Nobuhiro Iwamatsu
• [U-Boot] [PATCH v2 2/3] net: sh-eth: remove sh_eth_offset_rz table   Nobuhiro Iwamatsu
• [U-Boot] [PATCH 1/3] ARM: rmobile: Use CONFIG_SYS_BOARD instaed of CONFIG_ARCH_RMOBILE_BOARD_STRING   Nobuhiro Iwamatsu
• [U-Boot] [PATCH 2/3] ARM: rmobile: Move CONFIG_SYS_TEXT_BASE to Kconfig   Nobuhiro Iwamatsu
• [U-Boot] [PATCH 3/3] ARM: rmobile: Move config of SoCs to Kconfig   Nobuhiro Iwamatsu
• [U-Boot] [PATCH] net: sh-eth: Fix coding style checked by checkpatch.pl   Nobuhiro Iwamatsu
• [U-Boot] [PATCH] net: sh-eth: Remove bd_t from sh_eth_config()   Nobuhiro Iwamatsu
• [U-Boot] [PATCH] net: sh-eth: Change structure used in read/write function to struct sh_eth_info   Nobuhiro Iwamatsu
• [U-Boot] [linux-sunxi] Re: [PATCH] sunxi: set the default CPUx frequency of H5 to 816MHz   Ondřej Jirman
• [U-Boot] [linux-sunxi] Re: [PATCH] sunxi: set the default CPUx frequency of H5 to 816MHz   Ondřej Jirman
• [U-Boot] [PATCH 0/3] ls1012a: fix tftp failure   Calvin Johnson
• [U-Boot] [PATCH 1/3] drivers: net: pfe_eth: add pfe_rx_done to clear bd after packet processing   Calvin Johnson
• [U-Boot] [PATCH 2/3] drivers: net: pfe_eth: use writel/readl to access hw bds   Calvin Johnson
• [U-Boot] [PATCH 3/3] drivers: net: pfe_eth: cleanup typos and indent   Calvin Johnson
• [U-Boot] [PATCH 0/2] Remove unused pfe_eth code   Calvin Johnson
• [U-Boot] [PATCH 1/2] drivers: net: pfe_eth: remove unused code under CONFIG_UTIL_PE_DISABLED   Calvin Johnson
• [U-Boot] [PATCH 2/2] drivers: net: pfe_eth: remove unused code under CONFIG_PFE_WARN_WA   Calvin Johnson
• [U-Boot] [PATCH 0/3] ls1012a: fix tftp failure   Calvin Johnson
• [U-Boot] [PATCH] ARM: dts: exynos: fix property values of LDO15/17 for ODROID-XU3/4   Minkyu Kang
• [U-Boot] please pull u-boot-samsung master   Minkyu Kang
• [U-Boot] [PATCH] scsi: ceva: Start port in probe   Mian Yousaf Kaukab
• [U-Boot] U-boot how to store return value of "fuse read 0 5" as a uboot variable   Vijan Kaush
• [U-Boot] EFI: incorrect device paths   Mark Kettenis
• [U-Boot] [PATCH] sunxi: video: HDMI: split VSYNC and HSYNC polarity settings   Vasily Khoruzhick
• [U-Boot] FOSDEM Hardware Enablement Devroom   Paul Kocialkowski
• [U-Boot] Re : FOSDEM Hardware Enablement Devroom   Paul Kocialkowski
• [U-Boot] espressobin u-boot firmware   Matwey V. Kornilov
• [U-Boot] espressobin u-boot firmware   Matwey V. Kornilov
• [U-Boot] espressobin u-boot firmware   Matwey V. Kornilov
• [U-Boot] [PATCH v3 1/1] add support for Raspberry Pi Zero W   Dmitry Korunov
• [U-Boot] [PATCH] ARM: Samsung: Add Exynos5422-based Odroid HC1 support   Krzysztof Kozlowski
• [U-Boot] [Patch v3 2/2] armv8: ls1088: Enable SATA for ls1088   Ashish Kumar
• [U-Boot] [PATCH v4 1/2] armv8: lsch3: Add imply SCSI for ls1088   Ashish Kumar
• [U-Boot] [PATCH v4 2/2] armv8: ls1088: Enable SATA for ls1088   Ashish Kumar
• [U-Boot] [Patch V5 1/2] armv8: ls1088ardb: Add SD boot support for ls1088   Ashish Kumar
• [U-Boot] [Patch V5 2/2] armv8: ls1088aqds: Add SD boot support for ls1088qds   Ashish Kumar
• [U-Boot] [PATCH 1/3] arm64: ls1088ardb: Add distro boot support   Ashish Kumar
• [U-Boot] [PATCH 2/3] armv8: ls1088ardb: Add CONFIG_DISTRO_DEFAULTS qspi-defconfig   Ashish Kumar
• [U-Boot] [PATCH 3/3] armv8: ls1088ardb: Add CONFIG_DISTRO_DEFAULTS in SD defconfig   Ashish Kumar
• [U-Boot] [PATCH v6 1/2] armv8: ls1088ardb: Add SD boot support for ls1088   Ashish Kumar
• [U-Boot] [PATCH v6 2/2] armv8: ls1088aqds: Add SD boot support for ls1088qds   Ashish Kumar
• [U-Boot] [PATCH v2] armv8: ls1088ardb: Add distro boot support   Ashish Kumar
• [U-Boot] [PATCH] driver: net: ldpaa_eth: Add PHY-less SGMII support   Ashish Kumar
• [U-Boot] [PATCH v2] armv8: ls1088ardb: Add distro boot support   Ashish Kumar
• [U-Boot] [PATCH v6 1/2] armv8: ls1088ardb: Add SD boot support for ls1088   Ashish Kumar
• [U-Boot] [PATCH] driver: net: ldpaa_eth: Add PHY-less SGMII support   Ashish Kumar
• [U-Boot] [PATCH] armv8: ls1088: Add fsl_fdt_fixup_flash   Ashish Kumar
• [U-Boot] [Patch v2 1/2] driver: net: ldpaa_eth: Add PHY-less SGMII support   Ashish Kumar
• [U-Boot] [Patch v2 2/2] armv8: ls1088: introduce CONFIG_SGMII_PHYLIB   Ashish Kumar
• [U-Boot] [PATCH] armv8: ls1088a: Unset USE_BOOTCOMMAND in defconfig   Ashish Kumar
• [U-Boot] [PATCH] armv8: ls1088a: Add nand support for ls1088ardb   Ashish Kumar
• [U-Boot] [Patch v2 1/2] driver: net: ldpaa_eth: Add PHY-less SGMII support   Ashish Kumar
• [U-Boot] [PATCH] Do not attempt to use the systemwide libfdt   Jan Kundrát
• [U-Boot] [PATCH 1/2] sunxi: binman: Add U-Boot binary size check   Frank Kunz
• [U-Boot] [PATCH 1/2] sunxi: binman: Add U-Boot binary size check   Frank Kunz
• [U-Boot] ethernet: ROM MAC address vs env variable MAC address   Prabhakar Kushwaha
• [U-Boot] [PATCH] armv8: fsl-layerscape: Add support of disabling core prefetch   Prabhakar Kushwaha
• [U-Boot] [PATCH] driver: net: fsl-mc: Use base 16 in simple_strtoul   Prabhakar Kushwaha
• [U-Boot] [PATCH] cmd: mac: Update description of help   Prabhakar Kushwaha
• [U-Boot] [PATCH] armv8: fsl-layerscape: Add support of disabling core prefetch   Prabhakar Kushwaha
• [U-Boot] [PATCH][v2] armv8: fsl-layerscape: Add support of disabling core prefetch   Prabhakar Kushwaha
• [U-Boot] [PATCH 0/3] Update MAC address in "ethernet" node of Linux device tree   Prabhakar Kushwaha
• [U-Boot] [PATCH 1/3] common: Fix-up MAC addr in dts by fetching env variable serially   Prabhakar Kushwaha
• [U-Boot] [PATCH 2/3] arm: Add support of updating dts before fix-up   Prabhakar Kushwaha
• [U-Boot] [PATCH 3/3] boards: ls1046ardb: disable unavailable "ethernet" node in dts   Prabhakar Kushwaha
• [U-Boot] [PATCH 1/3] common: Fix-up MAC addr in dts by fetching env variable serially   Prabhakar Kushwaha
• [U-Boot] [PATCH 0/3][v2] Update MAC address in "ethernet" node of Linux device tree   Prabhakar Kushwaha
• [U-Boot] [PATCH 1/3][v2] common: Fix-up MAC addr in dts by fetching env variable serially   Prabhakar Kushwaha
• [U-Boot] [PATCH 2/3][v2] arm: Add support of updating dts before fix-up   Prabhakar Kushwaha
• [U-Boot] [PATCH 3/3] [v2] boards: ls1046ardb: disable unavailable "ethernet" node in dts   Prabhakar Kushwaha
• [U-Boot] [PATCH 0/3][v3] Update MAC address in "ethernet" node of Linux device tree   Prabhakar Kushwaha
• [U-Boot] [PATCH 1/3][v3] common: Fix-up MAC addr in dts by fetching env variable serially   Prabhakar Kushwaha
• [U-Boot] [PATCH 2/3][v3] arm: Add support of updating dts before fix-up   Prabhakar Kushwaha
• [U-Boot] [PATCH 3/3] [v3] boards: ls1046ardb: disable unavailable "ethernet" node in dts   Prabhakar Kushwaha
• [U-Boot] [RFC] Support for SGMII 2500   Prabhakar Kushwaha
• [U-Boot] [PATCH 2/2] armv8: ls1043a: Discard the needless cpu nodes   Prabhakar Kushwaha
• [U-Boot] [PATCH] serial: nulldev: Implement "pending" function to fix tstc return "true"   Wilson Lee
• [U-Boot] [PATCH v2] mtd: nand: zynq: Add a config option to use 1st stage bootloader timing   Wilson Lee
• [U-Boot] [PATCH] cmd: console: Add serial devices probe command   Wilson Lee
• [U-Boot] [RESEND PATCH] net: macb: Add support for Xilinx Zynq SoC   Wilson Lee
• [U-Boot] [RESEND PATCH] mtd: nand: zynq: Add support for the NAND lock/unlock operation   Wilson Lee
• [U-Boot] [PATCH] net: dhcp: Allow "MAY_FAIL" to still try each adapter   Wilson Lee
• [U-Boot] [PATCH] lib: sha1: Change uint8_t to unsigned char for sha1_der_prefix array.   Wilson Lee
• [U-Boot] [PATCH] mtd: zynq: nand: Move board_nand_init() function to board.c   Wilson Lee
• [U-Boot] [PATCH] ni: Add NIZYNQ platform   Wilson Lee
• [U-Boot] [PATCH] mtd: zynq: nand: Move board_nand_init() function to board.c   Wilson Lee
• [U-Boot] [PATCH v2] mtd: zynq: nand: Move board_nand_init() function to board.c   Wilson Lee
• [U-Boot] [PATCH] ni: Add NIZYNQ platform   Wilson Lee
• [U-Boot] [PATCH] ni: Add NIZYNQ platform   Wilson Lee
• [U-Boot] [PATCH] ni: Add NIZYNQ platform   Wilson Lee
• [U-Boot] [PATCH] lib: sha1: Change uint8_t to unsigned char for sha1_der_prefix array.   Wilson Lee
• [U-Boot] U-Boot AM335x board.c `ethaddr` changes.   Duane Leslie
• [U-Boot] mx6ull evk reboots automatically   Ye Li
• [U-Boot] [PATCH 1/5] mx6slevk: imximage.cfg: Handle the CONFIG_SECURE_BOOT case   Breno Lima
• [U-Boot] [PATCH 2/5] warp: imximage.cfg: Handle the CONFIG_SECURE_BOOT case   Breno Lima
• [U-Boot] [PATCH 3/5] mx6sl: Select MX6SL option via Kconfig   Breno Lima
• [U-Boot] [PATCH 4/5] Kconfig: mx6ull: Deselect MX6UL from CONFIG_MX6ULL   Breno Lima
• [U-Boot] [PATCH 5/5] imx: Kconfig: Add HAS_CAAM option   Breno Lima
• [U-Boot] [PATCH 1/4] arm64: ls1043ardb: Add sd_bootcmd for distro fallback in case of sdboot   Shengzhou Liu
• [U-Boot] [PATCH 1/4] ls1043ardb: Add sd_bootcmd for distro fallback in case of sdboot   Shengzhou Liu
• [U-Boot] [PATCH 2/4] arm64: ls1046ardb: Add sd_bootcmd for distro fallback in case of sdboot   Shengzhou Liu
• [U-Boot] [PATCH 3/4] armv7: ls1021atwr: Add sd_bootcmd for distro fallback in case of sdboot   Shengzhou Liu
• [U-Boot] [PATCH 4/4] ls2080ardb: Add sd_bootcmd for distro fallback in case of sdboot   Shengzhou Liu
• [U-Boot] [PATCH] README: update mailing list url   S. Lockwood-Childs
• [U-Boot] [PATCH] tools: env: Add support for direct read/write UBI volumes   S. Lockwood-Childs
• [U-Boot] [PATCH 0/9] arm: zynq: ps7* consolidation   Mike Looijmans
• [U-Boot] ethernet: ROM MAC address vs env variable MAC address   Mike Looijmans
• [U-Boot] [PATCH] armv8: ls1012a: enable/disable eSDHC1 through hwconfig for RDB   Y.b. Lu
• [U-Boot] dm: mmc: fsl_esdhc: Drop mmc_init() call from fsl_esdhc_init()   Y.b. Lu
• [U-Boot] dm: mmc: fsl_esdhc: Drop mmc_init() call from fsl_esdhc_init()   Y.b. Lu
• [U-Boot] [PATCH] armv8: ls1088ardb: support force SDHC mode by hwconfig   Y.b. Lu
• [U-Boot] [v2] armv8: ls1012a: enable/disable eSDHC1 through hwconfig for RDB   Y.b. Lu
• [U-Boot] [PATCH] armv8: ls1012a: enable/disable eSDHC1 through hwconfig for RDB   Yangbo Lu
• [U-Boot] [PATCH] armv8: ls1088ardb: support force SDHC mode by hwconfig   Yangbo Lu
• [U-Boot] [v2] armv8: ls1012a: enable/disable eSDHC1 through hwconfig for RDB   Yangbo Lu
• [U-Boot] [RFC] Support for SGMII 2500   Andrew Lunn
• [U-Boot] [RFC] Support for SGMII 2500   Andrew Lunn
• [U-Boot] [PATCH] mx6: Fix SPL boot device detection   Jiri Luznicky
• [U-Boot] [PATCH] mach-stm32: Fix mpu region's attribute for STM32H7   Vikas MANOCHA
• [U-Boot] [PATCH] mach-stm32: Fix mpu region's attribute for STM32H7   Vikas MANOCHA
• [U-Boot] UBI/UBIFS complete integrity check   Lukasz Majewski
• [U-Boot] [PATCH] ARM: Samsung: Add Exynos5422-based Odroid HC1 support   Lukasz Majewski
• [U-Boot] [PATCH] dm: serial: Add .pre_probe() function to to wait for previous transmission end   Lukasz Majewski
• [U-Boot] [PATCH] dm: serial: Add .pre_probe() function to to wait for previous transmission end   Lukasz Majewski
• [U-Boot] [PATCH] gpt: Use cache aligned buffers for gpt_h and gpt_e   Lukasz Majewski
• [U-Boot] UBI/UBIFS complete integrity check   Lukasz Majewski
• [U-Boot] [PATCH] Kconfig: BOOTCOMMAND: Define default set of boot commands in Kconfig   Lukasz Majewski
• [U-Boot] [PATCH v4] imx:display5: Add support for LWN's DISPLAY5 board (for v2017.11-rc2+)   Lukasz Majewski
• [U-Boot] [PATCH] board: imx6: marsboard: Remove doubled #include <asm/arch/sys_proto.h>   Lukasz Majewski
• [U-Boot] [PATCH] imx6: iomux: Add generic function to set RGMII IO voltage on IMX6 SoCs   Lukasz Majewski
• [U-Boot] [PATCH 1/3] imx6: Add include guards for include/asm/arch-mx6/sys_proto.h file   Lukasz Majewski
• [U-Boot] [PATCH 2/3] imx5: Add include guards for include/asm/arch-mx5/sys_proto.h file   Lukasz Majewski
• [U-Boot] [PATCH 3/3] imx7: Add include guards for include/asm/arch-mx7/sys_proto.h file   Lukasz Majewski
• [U-Boot] [PATCH] board: imx6: marsboard: Remove doubled #include <asm/arch/sys_proto.h>   Lukasz Majewski
• [U-Boot] [PATCH] gpt: add part-uuid and part-num subcommands   Lukasz Majewski
• [U-Boot] [PATCH 1/2] common: Generic file system firmware loader   Lukasz Majewski
• [U-Boot] [PATCH] Kconfig: Introduce USE_BOOTCOMMAND and migrate BOOTCOMMAND   Lukasz Majewski
• [U-Boot] ethernet: ROM MAC address vs env variable MAC address   Lukasz Majewski
• [U-Boot] [PATCH v5 0/8] Add support for GE PPD   Lukasz Majewski
• [U-Boot] [PATCH] gpt: add part-uuid and part-num subcommands   Lukasz Majewski
• [U-Boot] [PATCH] cmd: sf: remove useless pointer assignment   Lukasz Majewski
• [U-Boot] [PATCH 12/13] binman: Add documentation for the symbol feature   Lukasz Majewski
• [U-Boot] [PATCH] gpt: add part-uuid and part-num subcommands   Lukasz Majewski
• [U-Boot] [RFC PATCH 01/10] cmd: nvedit: Get rid of the env lookup   Lukasz Majewski
• [U-Boot] [RFC PATCH 02/10] env: Make env_driver_lookup_default private   Lukasz Majewski
• [U-Boot] [RFC PATCH 03/10] env: Rename env_driver_lookup_default and env_get_default_location   Lukasz Majewski
• [U-Boot] [RFC PATCH 04/10] env: Pass additional parameters to the env lookup function   Lukasz Majewski
• [U-Boot] [RFC PATCH 05/10] env: Make the env save message a bit more explicit   Lukasz Majewski
• [U-Boot] [RFC PATCH 06/10] env: Support multiple environments   Lukasz Majewski
• [U-Boot] [RFC PATCH 07/10] env: Allow to build multiple environments in Kconfig   Lukasz Majewski
• [U-Boot] [RFC PATCH 08/10] env: Mark env_get_location as weak   Lukasz Majewski
• [U-Boot] [RFC PATCH 09/10] sunxi: Transition from the MMC to a FAT-based environment   Lukasz Majewski
• [U-Boot] [RFC PATCH 10/10] env: sunxi: Enable FAT-based environment support by default   Lukasz Majewski
• [U-Boot] [PATCH v2 1/6] pico-imx6ul: Move dfu_alt_info to CONFIG_DFU_ENV_SETTINGS variable   Lukasz Majewski
• [U-Boot] mmc1 not working on Samsung snow chromebook   Lukasz Majewski
• [U-Boot] [PATCH v3] net: phy: marvell: Add functions to read PHY's extended registers   Lukasz Majewski
• [U-Boot] [RFC PATCH 06/10] env: Support multiple environments   Lukasz Majewski
• [U-Boot] [RFC PATCH 06/10] env: Support multiple environments   Lukasz Majewski
• [U-Boot] Working with patchwork   Lukasz Majewski
• [U-Boot] Working with patchwork   Lukasz Majewski
• [U-Boot] [PATCH] imx: Unify CONFIG_BOOTDELAY   Lukasz Majewski
• [U-Boot] [U-Boot,V9,1/4] usb: rockchip: add the rockusb gadget   Lukasz Majewski
• [U-Boot] [PATCH v3 04/14] Move debug and logging support to a separate header   Lukasz Majewski
• [U-Boot] [PATCH v3 07/14] log: Add an implemention of logging   Lukasz Majewski
• [U-Boot] [PATCH v3 08/14] log: Add a console driver   Lukasz Majewski
• [U-Boot] [PATCH v3 09/14] log: Add a 'log level' command   Lukasz Majewski
• [U-Boot] [PATCH v3 10/14] log: Add a test command   Lukasz Majewski
• [U-Boot] [PATCH v3 11/14] log: Plumb logging into the init sequence   Lukasz Majewski
• [U-Boot] [PATCH v3 12/14] log: sandbox: Enable logging   Lukasz Majewski
• [U-Boot] [PATCH v3 13/14] log: test: Add a pytest for logging   Lukasz Majewski
• [U-Boot] [PATCH v3 14/14] log: Add documentation   Lukasz Majewski
• [U-Boot] U-Boot proper(not SPL) relocate option   Lukasz Majewski
• [U-Boot] U-Boot proper(not SPL) relocate option   Lukasz Majewski
• [U-Boot] U-Boot proper(not SPL) relocate option   Lukasz Majewski
• [U-Boot] [PATCH] spl: make CONFIG_OF_EMBED pass dts through fdtgrep   Lukasz Majewski
• [U-Boot] [PATCH 1/5] dm: mmc: updated mmc_of_parse() to not fail because of an invalid bus-width   Lukasz Majewski
• [U-Boot] [PATCH 2/5] mmc: dm: support "mmc-ddr-1_2v" and "mmc-hs200-1_2v" boolean properties   Lukasz Majewski
• [U-Boot] [PATCH 3/5] mmc: dump card and host capabilities if debug is enabled   Lukasz Majewski
• [U-Boot] [PATCH 4/5] mmc: Fixed a problem with old sd or mmc that do not support High speed   Lukasz Majewski
• [U-Boot] [PATCH 5/5] mmc: all hosts support 1-bit bus width and legacy timings   Lukasz Majewski
• [U-Boot] [PATCH] spl: make CONFIG_OF_EMBED pass dts through fdtgrep   Lukasz Majewski
• [U-Boot] [PATCH 3/3] mx6sxsabresd: Use PARTUUID to specify the rootfs location   Lukasz Majewski
• [U-Boot] [PATCH 2/3] mx6sxsabresd: Load the correct dtb for revA board   Lukasz Majewski
• [U-Boot] [PATCH 1/3] imx: Add a common way for detecting NXP boards revision   Lukasz Majewski
• [U-Boot] [PATCH v2 1/2] power: regulator: add driver for the FAN53555 family   Lukasz Majewski
• [U-Boot] [GIT] Pull request: u-boot-dfu (23.11.2017)   Lukasz Majewski
• [U-Boot] uboot xip eim nor   Lukasz Majewski
• [U-Boot] v7_outer_cache_inval_range error on iMX6Q   Lukasz Majewski
• [U-Boot] [PATCH] fat: Use cache aligned buffers for fat_opendir   Lukasz Majewski
• [U-Boot] [PATCH] ARM: imx: display5: config: Update display5_factory_defconfig to use USE_BOOTCOMMAND   Lukasz Majewski
• [U-Boot] U-Boot proper(not SPL) relocate option   Lukasz Majewski
• [U-Boot] [RFC PATCH 00/13] Nexell S5P6818 SoC support   Lukasz Majewski
• [U-Boot] [GIT] Pull request: u-boot-dfu (30.11.2017)   Lukasz Majewski
• [U-Boot] [RFC PATCH 00/13] Nexell S5P6818 SoC support   Lukasz Majewski
• [U-Boot] [GIT] Pull request: u-boot-dfu (30.11.2017)   Lukasz Majewski
• [U-Boot] [PATCH 00/11] Extend clk_stm32f7 driver   Vikas Manocha
• [U-Boot] [PATCH] mach-stm32: Factorize MPU's region config for STM32 SoCs   Vikas Manocha
• [U-Boot] [PATCH v2 1/1] sunxi: Fix A20-OLinuXino-MICRO LAN8710 support   Stefan Mavrodiev
• [U-Boot] [PATCH v2 1/1] sunxi: Fix A20-OLinuXino-MICRO LAN8710 support   Stefan Mavrodiev
• [U-Boot] bootefi regression from v2017.9: GRUB fails to see partitions on NXP LS1043A   Mathew McBride
• [U-Boot] [PATCH v2] ARM: zynq: Add support for SYZYGY Hub board   Tom McLeod
• [U-Boot] [PATCH] SPL: Add FIT data-position property support   Tomas Melin
• [U-Boot] About the way to fix platform specific issue in source file xhci.c (U-Boot)   Bin Meng
• [U-Boot] About the way to fix platform specific issue in source file xhci.c (U-Boot)   Bin Meng
• [U-Boot] Support of latest qemux86-64   Bin Meng
• [U-Boot] [PATCH] MAINTAINERS: Update maintainer for USB xHCI   Bin Meng
• [U-Boot] Include FSP in u-boot.rom   Bin Meng
• [U-Boot] Include FSP in u-boot.rom   Bin Meng
• [U-Boot] Support of latest qemux86-64   Bin Meng
• [U-Boot] Support of latest qemux86-64   Bin Meng
• [U-Boot] [PATCH 1/2] usb: xhci: implement FEAT_POWER hook for switching regulators for ports   Bin Meng
• [U-Boot] [PATCH 1/2] usb: xhci: implement FEAT_POWER hook for switching regulators for ports   Bin Meng
• [U-Boot] [PATCH 1/1] x86: enable DISTRO_DEFAULTS for qemu   Bin Meng
• [U-Boot] [PATCH v1] x86: tangier: Use official ACPI HID for FLIS IP   Bin Meng
• [U-Boot] [PATCH 1/1] x86: don't compare pointers to 0   Bin Meng
• [U-Boot] [PATCH] x86: conga-qeval20-qa3-e3845: Adjust VGA rom address   Bin Meng
• [U-Boot] "usb storage" command issues   Bin Meng
• [U-Boot] [PATCH] Move Cache-As-RAM memory from area mapped to ROM in QEMU   Bin Meng
• [U-Boot] [PATCH v2] x86: lib: Implement standalone __udivdi3 etc instead of libgcc ones   Bin Meng
• [U-Boot] [PATCH 1/2] usb: xhci: implement FEAT_POWER hook for switching regulators for ports   Bin Meng
• [U-Boot] [PATCH V3] usb: xhci: Add Renesas R-Car xHCI driver   Bin Meng
• [U-Boot] [PATCH] Move Cache-As-RAM memory from area mapped to ROM in QEMU   Bin Meng
• [U-Boot] [PATCH] x86: conga-qeval20-qa3-e3845: Adjust VGA rom address   Bin Meng
• [U-Boot] [PATCH 1/1] x86: enable DISTRO_DEFAULTS for qemu   Bin Meng
• [U-Boot] [PATCH 1/1] mmc: sdhci: do not compare pointer to 0   Bin Meng
• [U-Boot] [PATCH v2 1/1] malloc: don't compare pointers to 0   Bin Meng
• [U-Boot] [PATCH 1/1] cmd: blk: remove unreachable code   Bin Meng
• [U-Boot] [PATCH 1/1] fs: avoid possible NULL dereference in fs_devread   Bin Meng
• [U-Boot] [PATCH V3] usb: xhci: Add Renesas R-Car xHCI driver   Bin Meng
• [U-Boot] [PATCH v2 1/1] x86: don't compare pointers to 0   Bin Meng
• [U-Boot] [PATCH v2 1/1] x86: don't compare pointers to 0   Bin Meng
• [U-Boot] [PATCH v3 1/6] x86: baytrail: Add fsp-header verification for secure boot FSP   Bin Meng
• [U-Boot] [PATCH] MAINTAINERS: Update maintainer for USB xHCI   Bin Meng
• [U-Boot] Intel Edison build warning   Bin Meng
• [U-Boot] [PATCH 1/1] x86: enable DISTRO_DEFAULTS for qemu   Bin Meng
• [U-Boot] [PATCH] Revert "x86: bootm: Fix FIT image booting on x86"   Bin Meng
• [U-Boot] [PATCH v2] x86: lib: Implement standalone __udivdi3 etc instead of libgcc ones   Bin Meng
• [U-Boot] [PATCH] Revert "x86: bootm: Fix FIT image booting on x86"   Bin Meng
• [U-Boot] Intel Edison build warning   Bin Meng
• [U-Boot] [PATCH v2] x86: lib: Implement standalone __udivdi3 etc instead of libgcc ones   Bin Meng
• [U-Boot] [PATCH v2] x86: lib: Implement standalone __udivdi3 etc instead of libgcc ones   Bin Meng
• [U-Boot] [PATCH 1/1] x86: enable DISTRO_DEFAULTS for qemu   Bin Meng
• [U-Boot] [PATCH v2] x86: lib: Implement standalone __udivdi3 etc instead of libgcc ones   Bin Meng
• [U-Boot] [PATCH v2] x86: lib: Implement standalone __udivdi3 etc instead of libgcc ones   Bin Meng
• [U-Boot] [PATCH 1/1] x86: enable DISTRO_DEFAULTS for qemu   Bin Meng
• [U-Boot] [PATCH 1/1] distro bootcmd: define bootloader name for x86   Bin Meng
• [U-Boot] [PATCH v3] x86: lib: Implement standalone __udivdi3 etc instead of libgcc ones   Bin Meng
• [U-Boot] [PATCH 1/1] distro bootcmd: define bootloader name for x86   Bin Meng
• [U-Boot] [PATCH v3] x86: lib: Implement standalone __udivdi3 etc instead of libgcc ones   Bin Meng
• [U-Boot] Please pull u-boot-x86   Bin Meng
• [U-Boot] [PATCH] dm: blk: Use uclass_find_first/next_device() in blk_first/next_device()   Bin Meng
• [U-Boot] UBI/UBIFS complete integrity check   Ladislav Michl
• [U-Boot] UBI/UBIFS complete integrity check   Ladislav Michl
• [U-Boot] [OE-core] [PATCH] u-boot: Upgrade to 2017.11 release   Ladislav Michl
• [U-Boot] [PATCH 1/1] ubifs: avoid possible NULL dereference   Ladislav Michl
• [U-Boot] [PATCH 1/1] ubifs: avoid possible NULL dereference   Ladislav Michl
• [U-Boot] [PATCH 1/1] ubifs: avoid possible NULL dereference   Ladislav Michl
• [U-Boot] [PATCH v2 1/1] ubifs: avoid possible NULL dereference   Ladislav Michl
• [U-Boot] [PATCH 1/1] ubifs: avoid possible NULL dereference   Ladislav Michl
• [U-Boot] [PATCH v2 1/1] ubifs: avoid possible NULL dereference   Ladislav Michl
• [U-Boot] [PATCH v2 1/1] ubifs: avoid possible NULL dereference   Ladislav Michl
• [U-Boot] UBI / UBIFS booting from NAND support   Ladislav Michl
• [U-Boot] UBI / UBIFS booting from NAND support   Ladislav Michl
• [U-Boot] powerpc 4xx support   Ivan Mikhaylov1
• [U-Boot] [PATCH] Revert "console: simplify puts()"   Soeren Moch
• [U-Boot] u-boot <=> kernel compatibility?   Chris Moore
• [U-Boot] u-boot <=> kernel compatibility?   Chris Moore
• [U-Boot] SECURE_BOOT on mx6qsabrelite   Roger No-Spam
• [U-Boot] [PATCH v1] mtd/spi: add support for is25lq040b   Sean Nyekjaer
• [U-Boot] [PATCH] fix: nand: pxa3xx: fix defined but not used warnings   Sean Nyekjaer
• [U-Boot] [PATCH] arm: mvebu: add nand pins   Sean Nyekjaer
• [U-Boot] [PATCH] arm: mvebu: fix boot from UART when in fallback mode   Sean Nyekjaer
• [U-Boot] [PATCH] arm: mvebu: enable boot from NAND   Sean Nyekjaer
• [U-Boot] [PATCH] mtd/spi: add support for is25lq040b   Sean Nyekjær
• [U-Boot] [PATCH 0/2] Fix the I2C on SAMA5D3   Alan Ott
• [U-Boot] [PATCH 1/2] i2c: at91_i2c: Wait for TXRDY after sending the first byte   Alan Ott
• [U-Boot] [PATCH 2/2] i2c: at91_i2c: remove the .probe_chip function   Alan Ott
• [U-Boot] U-Boot proper(not SPL) relocate option   Chris Packham
• [U-Boot] [PATCH v3] spi: kirkwood_spi: implement workaround for FE-9144572   Chris Packham
• [U-Boot] [PATCH] arm: mvebu: correct comments around cas_wl/cas_l   Chris Packham
• [U-Boot] [PATCH] net: xilinx_axi_emac: Use readl and writel for io ops   Siva Durga Prasad Paladugu
• [U-Boot] [PATCH] net: zynq_gem: Dont enable SGMII and PCS selection   Siva Durga Prasad Paladugu
• [U-Boot] [UBOOT PATCH 1/2] spi: zynqmp_qspi: Add support for ZynqMP qspi driver   Siva Durga Prasad Paladugu
• [U-Boot] [PATCH v2 00/26] mmc: Add support for HS200 and UHS modes   Siva Durga Prasad Paladugu
• [U-Boot] [PATCH v3] DW SPI: Get clock value from Device Tree   Eugeniy Paltsev
• [U-Boot] [PATCH v4 0/2] DW SPI: Get clock value from Device Tree   Eugeniy Paltsev
• [U-Boot] [PATCH v4 1/2] SOCFPGA: clock manager: implement dw_spi_get_clk function   Eugeniy Paltsev
• [U-Boot] [PATCH v4 2/2] DW SPI: Get clock value from Device Tree   Eugeniy Paltsev
• [U-Boot] [PATCH v5 0/2] DW SPI: Get clock value from Device Tree   Eugeniy Paltsev
• [U-Boot] [PATCH v5 1/2] SOCFPGA: clock manager: implement dw_spi_get_clk function   Eugeniy Paltsev
• [U-Boot] [PATCH v5 2/2] DW SPI: Get clock value from Device Tree   Eugeniy Paltsev
• [U-Boot] [PATCH] ARC: add macro to get CPU id   Eugeniy Paltsev
• [U-Boot] [PATCH] ARC: add defines of some cache and xCCM AUX registers   Eugeniy Paltsev
• [U-Boot] [PATCH] ARC: clk: introduce HSDK cgu clock driver   Eugeniy Paltsev
• [U-Boot] [PATCH] ARC: cache: fix using uninitialized "*_exists" variables   Eugeniy Paltsev
• [U-Boot] [PATCH] Enable HDMI on i.MX6 without VPU   Nikolay Petukhov
• [U-Boot] [PATCH] SECURE BOOT: Add fall back option   Vinitha Pillai-B57223
• [U-Boot] [PATCH v2] SECURE BOOT: Add fall back option   Vinitha Pillai-B57223
• [U-Boot] [U-boot][SDP] Trigger watchdog before calling usb_gadget_handle_interrupts   Vincent Prince
• [U-Boot] [PATCH] dra7x: fastboot: Increase recovery partition size   Sam Protsenko
• [U-Boot] SUNXI: A64: Increase SPL size   Andre Przywara
• [U-Boot] SUNXI: A64: Increase SPL size   Andre Przywara
• [U-Boot] SUNXI: A64: Increase SPL size   Andre Przywara
• [U-Boot] SUNXI: A64: Increase SPL size   Andre Przywara
• [U-Boot] [PATCH 3/4] sunxi: Add default partition scheme   Andre Przywara
• [U-Boot] [PATCH 3/4] sunxi: Add default partition scheme   Andre Przywara
• [U-Boot] [PATCH 3/4] sunxi: Add default partition scheme   Andre Przywara
• [U-Boot] [RFC PATCH 02/10] env: Make env_driver_lookup_default private   Andre Przywara
• [U-Boot] [PATCH] armv8: shrink exception table code   Andre Przywara
• [U-Boot] [RFC PATCH 00/13] Nexell S5P6818 SoC support   Andre Przywara
• [U-Boot] [RFC PATCH 01/13] serial: s5p: rework Samsung UART driver to get rid of uart.h   Andre Przywara
• [U-Boot] [RFC PATCH 02/13] serial: S5P/Samsung: refactor and Kconfig-ize UART selection   Andre Przywara
• [U-Boot] [RFC PATCH 03/13] arm: move SYS_ARCH_TIMER to KConfig   Andre Przywara
• [U-Boot] [RFC PATCH 04/13] reset: add driver for generic reset controllers   Andre Przywara
• [U-Boot] [RFC PATCH 05/13] mmc: add MMC (glue) driver for Nexell SoCs   Andre Przywara
• [U-Boot] [RFC PATCH 06/13] arm: add basic framework for Nexell S5P6818 support   Andre Przywara
• [U-Boot] [RFC PATCH 07/13] arm: nexell: embed NSIH header   Andre Przywara
• [U-Boot] [RFC PATCH 08/13] arm: nexell: add ARM64 MMU regions   Andre Przywara
• [U-Boot] [RFC PATCH 09/13] arm: nexell: add UART support   Andre Przywara
• [U-Boot] [RFC PATCH 10/13] arm: nexell: add timer support   Andre Przywara
• [U-Boot] [RFC PATCH 11/13] arm: nexell: add preliminary S5P6818 SoC device tree   Andre Przywara
• [U-Boot] [RFC PATCH 12/13] arm: add NanoPi M3 board support   Andre Przywara
• [U-Boot] [RFC PATCH 13/13] arm: nexell: switch to 32-bit   Andre Przywara
• [U-Boot] [PATCH 3/4] sunxi: Add default partition scheme   Andre Przywara
• [U-Boot] [PATCH 4/4] fastboot: Enable flashing by default on sunxi   Andre Przywara
• [U-Boot] [RFC PATCH 00/13] Nexell S5P6818 SoC support   Andre Przywara
• [U-Boot] SUNXI: A64: Increase SPL size   André Przywara
• [U-Boot] sun50i blocking SPL changes   André Przywara
• [U-Boot] sun50i blocking SPL changes   André Przywara
• [U-Boot] [PATCH 1/4] part: efi: Add a Kconfig option for the number of partition entries   André Przywara
• [U-Boot] [PATCH 2/4] part: efi: Add default number of partition entries for sunxi   André Przywara
• [U-Boot] [PATCH 3/4] sunxi: Add default partition scheme   André Przywara
• [U-Boot] [PATCH 4/4] fastboot: Enable flashing by default on sunxi   André Przywara
• [U-Boot] Enabling saveenv in baltos   Aditya Purohit
• [U-Boot] U-Boot AM335x board.c `ethaddr` changes.   Roger Quadros
• [U-Boot] [PATCH 1/2] common: make bouncebuf work for non-DMA transfers   Vignesh R
• [U-Boot] [PATCH 1/2] common: make bouncebuf work for non-DMA transfers   Vignesh R
• [U-Boot] [PATCH v2] Revert "spi: cadence_qspi_apb: Use 32 bit indirect read transaction when possible"   Vignesh R
• [U-Boot] [PATCH v4 0/5] spi: cadence_spi: Adopt Linux DT bindings   Vignesh R
• [U-Boot] [ANN] U-Boot v2017.11-rc4 released   Jorge Ramirez
• [U-Boot] [PATCH 2/2] configs: dragonboard410c: Save environment data on eMMC   Jorge Ramirez
• [U-Boot] [PATCH 2/2] configs: dragonboard410c: Save environment data on eMMC   Jorge Ramirez
• [U-Boot] Universal Flash Storage - controllers   Jorge Ramirez
• [U-Boot] sdhci - review?   Jorge Ramirez
• [U-Boot] [PATCH 2/2] configs: dragonboard410c: Save environment data on eMMC   Jorge Ramirez
• [U-Boot] sdhci - review?   Jorge Ramirez
• [U-Boot] [PATCHv3] env: enable accessing the environment in an EXT4 partition   Jorge Ramirez
• [U-Boot] [PATCHv3] env: enable accessing the environment in an EXT4 partition   Jorge Ramirez
• [U-Boot] [PATCHv4] env: enable accessing the environment in an EXT4 partition   Jorge Ramirez
• [U-Boot] [PATCH] mmc: sdhci: don't clear SDHCI_INT_STATUS register during CMD_INHIBIT   Jorge Ramirez-Ortiz
• [U-Boot] [PATCH 1/2] env: Save environment at the end of an MMC partition   Jorge Ramirez-Ortiz
• [U-Boot] [PATCH 2/2] configs: dragonboard410c: Save environment data on eMMC   Jorge Ramirez-Ortiz
• [U-Boot] [PATCH] env: enable CONFIG_ENV_IS_IN_EXT4   Jorge Ramirez-Ortiz
• [U-Boot] [PATCHv2] env: enable accessing the environemnt in EXT4 partition   Jorge Ramirez-Ortiz
• [U-Boot] [PATCHv3] env: enable accessing the environment in an EXT4 partition   Jorge Ramirez-Ortiz
• [U-Boot] [PATCHv4] env: enable accessing the environment in an EXT4 partition   Jorge Ramirez-Ortiz
• [U-Boot] [PATCH 2/3] arm: mach-snapdragon: refactor clock driver   Jorge Ramirez-Ortiz
• [U-Boot] [PATCH 3/3] board: Add Qualcomm Dragonboard 820C support   Jorge Ramirez-Ortiz
• [U-Boot] [PATCH 1/3] env: enable accessing the environment in an EXT4 partition   Jorge Ramirez-Ortiz
• [U-Boot] [PULL] Please pull u-boot-imx   Tom Rini
• [U-Boot] [PATCH v2 2/7] ext4: recover from filesystem corruption when reading   Tom Rini
• [U-Boot] [PATCH v2 5/7] bootcount: add support for bootcounter on EXT filesystem   Tom Rini
• [U-Boot] Where should Renesas RZ/A go under arch/arm/ ????   Tom Rini
• [U-Boot] [PATCH v3 5/7] bootcount: add support for bootcounter on EXT filesystem   Tom Rini
• [U-Boot] [PATCH v3 5/7] bootcount: add support for bootcounter on EXT filesystem   Tom Rini
• [U-Boot] [PULL] Please pull u-boot-rockchip   Tom Rini
• [U-Boot] [GIT PULL] Xilinx fix for v2017.11   Tom Rini
• [U-Boot] u-boot <=> kernel compatibility?   Tom Rini
• [U-Boot] Kconfig: Migrate MTDIDS_DEFAULT / MTDPARTS_DEFAULT   Tom Rini
• [U-Boot] please pull u-boot-samsung master   Tom Rini
• [U-Boot] [PATCH] Kconfig: BOOTCOMMAND: Define default set of boot commands in Kconfig   Tom Rini
• [U-Boot] [PATCH] Revert "console: simplify puts()"   Tom Rini
• [U-Boot] [PATCH] Kconfig: Introduce USE_BOOTCOMMAND and migrate BOOTCOMMAND   Tom Rini
• [U-Boot] MAINTAINERS: Add missing boards and config entries   Tom Rini
• [U-Boot] image-sig: use designated initializers for algorithm   Tom Rini
• [U-Boot] [U-Boot,1/5] sti: fix STMicroelectronics copyright   Tom Rini
• [U-Boot] [U-Boot,2/5] stm32: fix STMicroelectronics copyright   Tom Rini
• [U-Boot] [U-Boot, 3/5] stv0991: fix STMicroelectronics copyright   Tom Rini
• [U-Boot] [U-Boot,4/5] spear: fix STMicroelectronics copyright   Tom Rini
• [U-Boot] [U-Boot, 5/5] tpm: st33zp24: fix STMicroelectronics copyright   Tom Rini
• [U-Boot] tools: env: allow to print U-Boot version   Tom Rini
• [U-Boot] test/py: regenerate persistent GPT image if code changes   Tom Rini
• [U-Boot] tools: image: fix "algo" property of public key for verified boot   Tom Rini
• [U-Boot] [U-Boot, 1/2] tools: image: allow to sign image nodes without -K option   Tom Rini
• [U-Boot] [U-Boot, 2/2] tools: image: fix message when fail to add verification data for config   Tom Rini
• [U-Boot] gpt: Use cache aligned buffers for gpt_h and gpt_e   Tom Rini
• [U-Boot] disk: part_dos: fix part_get_info_extended() function   Tom Rini
• [U-Boot] m68k: doc: update outdated documentation   Tom Rini
• [U-Boot] Do not attempt to use the systemwide libfdt   Tom Rini
• [U-Boot] cosmetic: rmobile: renesas spelled wrong   Tom Rini
• [U-Boot] [ANN] U-Boot v2017.11-rc4 released   Tom Rini
• [U-Boot] [PATCH v3 1/3] mx25: Move MX25 selection to Kconfig   Tom Rini
• [U-Boot] [PATCH 0/5] libfdt: Reduce duplicated copies of libfdt   Tom Rini
• [U-Boot] [PULL] Please pull u-boot-rockchip   Tom Rini
• [U-Boot] [ANN] U-Boot v2017.11-rc4 released   Tom Rini
• [U-Boot] [PATCH 2/2] configs: dragonboard410c: Save environment data on eMMC   Tom Rini
• [U-Boot] [PATCH 1/1] scripts/ld-version.sh: regular expression compile fails   Tom Rini
• [U-Boot] [PATCH 2/2] configs: dragonboard410c: Save environment data on eMMC   Tom Rini
• [U-Boot] [PATCH 1/1] kconfig/symbol.c: use correct pointer type argument for sizeof   Tom Rini
• [U-Boot] Universal Flash Storage - controllers   Tom Rini
• [U-Boot] [PULL] Please pull u-boot-imx   Tom Rini
• [U-Boot] Pull request: u-boot-sunxi/master   Tom Rini
• [U-Boot] [PULL] Please pull u-boot-rockchip   Tom Rini
• [U-Boot] Pull request: u-boot-sunxi/master   Tom Rini
• [U-Boot] [PATCH] Move Cache-As-RAM memory from area mapped to ROM in QEMU   Tom Rini
• [U-Boot] ARM: rmobile: Fix eMMC signal voltage on Salvator-X/XS   Tom Rini
• [U-Boot] board: sysam: stmark2: add missing environment location   Tom Rini
• [U-Boot] Revert "console: simplify puts()"   Tom Rini
• [U-Boot] [PATCH v4 1/3] thermal: ti-bandgap: Add support for temperature sensor   Tom Rini
• [U-Boot] [PATCH v2 1/1] malloc: don't compare pointers to 0   Tom Rini
• [U-Boot] [ANN] U-Boot v2017.11 is released   Tom Rini
• [U-Boot] [PATCH] env: Remove CONFIG_ENV_AES support   Tom Rini
• [U-Boot] [RFC PATCH 1/2] board: laird: add WB45N CPU module   Tom Rini
• [U-Boot] [OE-core] [PATCH] u-boot: Upgrade to 2017.11 release   Tom Rini
• [U-Boot] powerpc 4xx support   Tom Rini
• [U-Boot] [PATCH 3/4] sunxi: Add default partition scheme   Tom Rini
• [U-Boot] Please pull fsl-qoriq master   Tom Rini
• [U-Boot] Please pull u-boot-marvell/master   Tom Rini
• [U-Boot] [RFC PATCH 06/10] env: Support multiple environments   Tom Rini
• [U-Boot] am33xx: Add a function to query MPU voltage in uV   Tom Rini
• [U-Boot] board: ti: dra71x-evm: Hook LDO1 of LP8733 to EN_PIN   Tom Rini
• [U-Boot] [U-Boot, u-boot, 1/3] ARM: dts: Synchronize Amlogic from Linux Mainline 4.13.5   Tom Rini
• [U-Boot] [U-Boot,u-boot,2/3] pinctrl: meson: Add GXL Support   Tom Rini
• [U-Boot] [U-Boot, u-boot, 3/3] arm: add initial support for Amlogic P212 based on Meson GXL family   Tom Rini
• [U-Boot] [U-Boot, v2, 1/4] scripts/dtc: add fdt_overlay.c and fdt_addresses.c to sync script   Tom Rini
• [U-Boot] [U-Boot, v2, 2/4] scripts/dtc: Update to upstream version v1.4.5-3-gb1a60033c110   Tom Rini
• [U-Boot] [U-Boot, v2, 3/4] pylibfdt: move pylibfdt to scripts/dtc/pylibfdt and refactor makefile   Tom Rini
• [U-Boot] [U-Boot, v2, 4/4] pylibfdt: compile pylibfdt only when dtoc/binman is necessary   Tom Rini
• [U-Boot] [U-Boot, 1/5] libfdt: change fdt.h to a wrapper of scripts/dtc/libfdt/*   Tom Rini
• [U-Boot] [U-Boot, 2/5] libfdt: change libfdt_internal.h to a wrapper of scripts/dtc/libfdt/*   Tom Rini
• [U-Boot] [U-Boot, 3/5] tools: use files from scripts/dtc/libfdt where possible   Tom Rini
• [U-Boot] [U-Boot,4/5] linux/types.h: add typedef of uintptr_t   Tom Rini
• [U-Boot] [U-Boot, 5/5] lib: libfdt: wrap scripts/dtc/libfdt/* where possible   Tom Rini
• [U-Boot] [U-Boot, u-boot, 1/3] net: phy: Add Amlogic Meson GXL Internal PHY support   Tom Rini
• [U-Boot] [U-Boot, u-boot, 2/3] arm: meson: Add supplementary ethernet registers definitions   Tom Rini
• [U-Boot] [U-Boot, u-boot, 3/3] arm: amlogic: p212: Add support for Ethernet with Internal PHY   Tom Rini
• [U-Boot] omap2: nand: Make NAND_OMAP_GPMC_PREFETCH default   Tom Rini
• [U-Boot] [U-Boot, v2, 1/5] mmc: arm_pl180_mmci: update arm_pl180_mmci_init() prototype   Tom Rini
• [U-Boot] [U-Boot, v2, 2/5] mmc: arm_pl180_mmci: adapt driver to DM usage   Tom Rini
• [U-Boot] [U-Boot, v2, 3/5] mmc: arm_pl180_mmci: add bus_width DT property support   Tom Rini
• [U-Boot] [U-Boot, v2, 4/5] mmc: arm_pl180_mmci: add clock support   Tom Rini
• [U-Boot] [U-Boot, v2, 5/5] mmc: arm_pl180_mmci: add .getcd callback   Tom Rini
• [U-Boot] clk: clk_stm32f7: fix PLL clock division factor   Tom Rini
• [U-Boot] test/py: add timestamps to log   Tom Rini
• [U-Boot] arm64: support running at addr other than linked to   Tom Rini
• [U-Boot] armv8: update gd after relocate   Tom Rini
• [U-Boot] serial: nulldev: Implement "pending" function to fix tstc return "true"   Tom Rini
• [U-Boot] [U-Boot, 1/2] env: Save environment at the end of an MMC partition   Tom Rini
• [U-Boot] [U-Boot, 2/2] configs: dragonboard410c: Save environment data on eMMC   Tom Rini
• [U-Boot] omap3: omap3_logic: Move pinmuxing to header file   Tom Rini
• [U-Boot] nios2: 10m50: Add CPU pre-relocation in device tree   Tom Rini
• [U-Boot] [U-Boot, PATCHv2] dm: pci: change bus number register setting compliant with Linux   Tom Rini
• [U-Boot] [U-Boot, 1/1] Add UART base addresses for additional UARTs   Tom Rini
• [U-Boot] arm: config: fix default console only to specify the device   Tom Rini
• [U-Boot] [OE-core] [PATCH] u-boot: Upgrade to 2017.11 release   Tom Rini
• [U-Boot] Kconfig: Introduce USE_BOOTCOMMAND and migrate BOOTCOMMAND   Tom Rini
• [U-Boot] [OE-core] [PATCH] u-boot: Upgrade to 2017.11 release   Tom Rini
• [U-Boot] [OE-core] [PATCH] u-boot: Upgrade to 2017.11 release   Tom Rini
• [U-Boot] Pull request: u-boot-ubi/master   Tom Rini
• [U-Boot] Convert CONFIG_SYS_NAND_ECCSIZE et al to Kconfig   Tom Rini
• [U-Boot] [U-Boot, v5, 1/3] thermal: ti-bandgap: Add support for temperature sensor   Tom Rini
• [U-Boot] [U-Boot, v5, 1/3] thermal: ti-bandgap: Add support for temperature sensor   Tom Rini
• [U-Boot] [PATCH] TI: am57xx; Remove am57xx_evm_nodt_defconfig   Tom Rini
• [U-Boot] [U-Boot, 1/1] kconfig/symbol.c: use correct pointer type argument for sizeof   Tom Rini
• [U-Boot] [U-Boot, v2, 1/1] scripts/ld-version.sh: regular expression compile fails   Tom Rini
• [U-Boot] dra7x: fastboot: Increase recovery partition size   Tom Rini
• [U-Boot] [U-Boot,v2,1/1] yaffs2: rework yaffs_new_obj_id   Tom Rini
• [U-Boot] [U-Boot, 1/1] scripts/coccinelle: add some more coccinelle tests   Tom Rini
• [U-Boot] [U-Boot,v2,1/1] malloc: don't compare pointers to 0   Tom Rini
• [U-Boot] Makefile: Correct SPL/TPL/DTB build race condition   Tom Rini
• [U-Boot] [U-Boot,1/1] omap3: spi: the symbol for Hertz is Hz   Tom Rini
• [U-Boot] env: Remove CONFIG_ENV_AES support   Tom Rini
• [U-Boot] envtools: make sure version/timestamp header file are available   Tom Rini
• [U-Boot] README: update mailing list url   Tom Rini
• [U-Boot] [U-Boot,v2,1/1] Makefile: add coccicheck target   Tom Rini
• [U-Boot] [PATCH] TI: am57xx; Remove am57xx_evm_nodt_defconfig   Tom Rini
• [U-Boot] [U-Boot, v5, 1/3] thermal: ti-bandgap: Add support for temperature sensor   Tom Rini
• [U-Boot] [U-Boot, v5, 2/3] ARM: dts: OMAP5+: Add support for bandgap sensor in SPL   Tom Rini
• [U-Boot] [U-Boot, v5, 3/3] ARM: dra7: Kconfig: Add thermal configs for dra7xx and am57xx   Tom Rini
• [U-Boot] sdhci - review?   Tom Rini
• [U-Boot] [PULL] Please pull from u-boot-rockchip/master   Tom Rini
• [U-Boot] Please pull u-boot-dm   Tom Rini
• [U-Boot] Please pull ARC changes   Tom Rini
• [U-Boot] [PULL] Please pull u-boot-rockchip/master   Tom Rini
• [U-Boot] [PATCH] env: enable CONFIG_ENV_IS_IN_EXT4   Tom Rini
• [U-Boot] [PATCHv3] env: enable accessing the environment in an EXT4 partition   Tom Rini
• [U-Boot] [PATCHv3] env: enable accessing the environment in an EXT4 partition   Tom Rini
• [U-Boot] U-Boot proper(not SPL) relocate option   Tom Rini
• [U-Boot] U-Boot proper(not SPL) relocate option   Tom Rini
• [U-Boot] [PATCHv4] env: enable accessing the environment in an EXT4 partition   Tom Rini
• [U-Boot] [PATCH] test/run: Exit on error from tests   Tom Rini
• [U-Boot] [PATCH] test/run: Exit on error from tests   Tom Rini
• [U-Boot] [PATCH] spl: TI: Do not default to SPL_FIT_IMAGE_TINY being enabled   Tom Rini
• [U-Boot] [PATCHv2] spl: TI: Do not default to SPL_FIT_IMAGE_TINY being enabled   Tom Rini
• [U-Boot] [GIT PULL] Please pull u-boot-mmc master   Tom Rini
• [U-Boot] [PATCH] arm: dts: exynos4: fix the device-tree compile warning   Tom Rini
• [U-Boot] [GIT PULL] NAND + UniPhier updates for v2018.01-rc1   Tom Rini
• [U-Boot] [PULL] Please pull u-boot-imx   Tom Rini
• [U-Boot] [U-Boot, v2, 1/7] test: Correct operation when tests pass   Tom Rini
• [U-Boot] [PATCH] spl: TI: Do not default to SPL_FIT_IMAGE_TINY being enabled   Tom Rini
• [U-Boot] [PATCH] test/run: Exit on error from tests   Tom Rini
• [U-Boot] [PATCH 1/4] part: efi: Add a Kconfig option for the number of partition entries   Tom Rini
• [U-Boot] [PATCH 0/5] Remove assert()   Tom Rini
• [U-Boot] [GIT PULL] NAND + UniPhier updates for v2018.01-rc1   Tom Rini
• [U-Boot] [PULL] u-boot-usb/master   Tom Rini
• [U-Boot] [PULL] u-boot-socfpga/master   Tom Rini
• [U-Boot] [PATCH 0/5] Remove assert()   Tom Rini
• [U-Boot] [PATCH 0/5] Remove assert()   Tom Rini
• [U-Boot] [PATCH] fdtdec: Support parsing multiple /memory nodes   Tom Rini
• [U-Boot] [PATCH 0/5] Remove assert()   Tom Rini
• [U-Boot] [GIT PULL] NAND + UniPhier updates for v2018.01-rc1 (2nd trial)   Tom Rini
• [U-Boot] [GIT PULL] u-boot-mips/master   Tom Rini
• [U-Boot] [GIT PULL] Xilinx changes for v2018.01   Tom Rini
• [U-Boot] [PATCH v4 07/10] mmc: allow to compile out the error messages   Tom Rini
• [U-Boot] [PATCH v4 09/10] mmc: make optional the support for eMMMC hardware partitioning   Tom Rini
• [U-Boot] Has versatilepb board support permanently been dropped in latest u-boot?   Tom Rini
• [U-Boot] [U-Boot,v3,10/14] log: Add a test command   Tom Rini
• [U-Boot] Uboot send pull request   Tom Rini
• [U-Boot] tools: env: Add support for direct read/write UBI volumes   Tom Rini
• [U-Boot] [U-Boot, 01/11] ARM: DTS: stm32: add pwrcfg node for stm32f746   Tom Rini
• [U-Boot] [U-Boot, 02/11] clk: stm32f7: retrieve PWR base address from DT   Tom Rini
• [U-Boot] [U-Boot, 03/11] clk: stm32f7: add dedicated STM32F7 compatible string   Tom Rini
• [U-Boot] [U-Boot, 04/11] ARM: DTS: stm32: update rcc compatible for STM32F746   Tom Rini
• [U-Boot] [U-Boot,05/11] clk: stm32f7: add STM32F4 support   Tom Rini
• [U-Boot] [U-Boot, 06/11] clk: stm32f7: rename clk_stm32f7.c to clk_stm32f.c   Tom Rini
• [U-Boot] [U-Boot, 07/11] clk: stm32fx: migrate define from rcc.h to driver   Tom Rini
• [U-Boot] [U-Boot, 08/11] configs: stm32f746-disco: enable MISC/DM_RESET/STM32_RESET and STM32_RCC   Tom Rini
• [U-Boot] [U-Boot, 09/11] dm: misc: bind STM32F4/F7 clock from rcc MFD driver   Tom Rini
• [U-Boot] [U-Boot, 10/11] clk: clk_stm32fx: add clock configuration for mmc usage   Tom Rini
• [U-Boot] [U-Boot, 11/11] stm32: migrate clock structs in include/stm32_rcc.h   Tom Rini
• [U-Boot] mach-stm32: Factorize MPU's region config for STM32 SoCs   Tom Rini
• [U-Boot] clk: at91: Kconfig: fix the dependency of AT91_UTMI   Tom Rini
• [U-Boot] [U-Boot, 1/2] clk: at91: clk-generated: select absolute closest rate   Tom Rini
• [U-Boot] [U-Boot, 2/2] clk: at91: clk-generated: fix incorrect index of clk source   Tom Rini
• [U-Boot] mmc: atmel_sdhci: not on capabilities to set gck rate   Tom Rini
• [U-Boot] [U-Boot,1/2] ARM: at91: add sama5d2 smc header   Tom Rini
• [U-Boot] [U-Boot,2/2] board: atmel: add sama5d2_ptc_ek board   Tom Rini
• [U-Boot] disk: efi: correct the allocation size for mbr header in stack   Tom Rini
• [U-Boot] [U-Boot, 1/1] common: command: tempory buffer should have size of command line buf   Tom Rini
• [U-Boot] [U-Boot,1/1] cmd: blk: remove unreachable code   Tom Rini
• [U-Boot] [U-Boot, 1/1] fs: avoid possible NULL dereference in fs_devread   Tom Rini
• [U-Boot] ARM: dts: Rename logicpd-toredp-37xx-devkit in U-Boot   Tom Rini
• [U-Boot] spl: make CONFIG_OF_EMBED pass dts through fdtgrep   Tom Rini
• [U-Boot] env: suppress a spurious warning with GCC 7.1   Tom Rini
• [U-Boot] [U-Boot,v2,1/2] board: laird: add WB45N CPU module   Tom Rini
• [U-Boot] [U-Boot,v2,2/2] board: laird: add WB50N CPU module   Tom Rini
• [U-Boot] fat: Use cache aligned buffers for fat_opendir   Tom Rini
• [U-Boot] [U-Boot,v3,10/14] log: Add a test command   Tom Rini
• [U-Boot] [PATCH v5 07/11] mmc: convert most of printf() to pr_err() and pr_warn()   Tom Rini
• [U-Boot] [PATCH v5 11/11] configs: omapl138_lcdk: decrease the loglevel to reduce the size of the SPL   Tom Rini
• [U-Boot] Please pull u-boot-x86   Tom Rini
• [U-Boot] Please pull u-boot-marvell/master   Tom Rini
• [U-Boot] [PULL] u-boot-sh/rmobile-mx   Tom Rini
• [U-Boot] [PATCH v2 1/2] video: sunxi: de2: fix SimpleFB node creation when HDMI not initialized   Maxime Ripard
• [U-Boot] [PATCH v2 2/2] video: sunxi: de2: add support for LCD SimpleFB   Maxime Ripard
• [U-Boot] [PATCH] sunxi: set the default CPUx frequency of H5 to 816MHz   Maxime Ripard
• [U-Boot] [PATCH] sunxi: lower the DRAM frequency of Nano Pi NEO2 to 504MHz   Maxime Ripard
• [U-Boot] [PATCH 1/2] sunxi: binman: Add U-Boot binary size check   Maxime Ripard
• [U-Boot] sunxi: broken sun4i_emacs, all boards?   Maxime Ripard
• [U-Boot] [PATCH] sunxi: set the default CPUx frequency of H5 to 816MHz   Maxime Ripard
• [U-Boot] [PATCH] Convert CONFIG_SYS_NAND_ECCSIZE et al to Kconfig   Maxime Ripard
• [U-Boot] sunxi: broken sun4i_emacs, all boards?   Maxime Ripard
• [U-Boot] [PATCH 1/2] sunxi: binman: Add U-Boot binary size check   Maxime Ripard
• [U-Boot] [PATCH] sunxi: a64: Add verified-boot support   Maxime Ripard
• [U-Boot] sunxi: SATA link timeout fix   Maxime Ripard
• [U-Boot] sunxi: SATA link timeout fix   Maxime Ripard
• [U-Boot] SUNXI: A64: Increase SPL size   Maxime Ripard
• [U-Boot] SUNXI: A64: Increase SPL size   Maxime Ripard
• [U-Boot] SUNXI: A64: Increase SPL size   Maxime Ripard
• [U-Boot] [PATCH v2 1/3] sunxi: a64: Enable FIT Signature   Maxime Ripard
• [U-Boot] [PATCH v2 3/3] sunxi: README.sunxi64: Document verified-boot for a64   Maxime Ripard
• [U-Boot] [PATCH] sunxi: add support for Orange Pi R1 board   Maxime Ripard
• [U-Boot] [PATCH 0/4] sunxi: Ease eMMC usage and flashing   Maxime Ripard
• [U-Boot] [PATCH 1/4] part: efi: Add a Kconfig option for the number of partition entries   Maxime Ripard
• [U-Boot] [PATCH 2/4] part: efi: Add default number of partition entries for sunxi   Maxime Ripard
• [U-Boot] [PATCH 3/4] sunxi: Add default partition scheme   Maxime Ripard
• [U-Boot] [PATCH 4/4] fastboot: Enable flashing by default on sunxi   Maxime Ripard
• [U-Boot] [RFC PATCH 00/10] env: Multiple env support and env transition for sunxi   Maxime Ripard
• [U-Boot] [RFC PATCH 01/10] cmd: nvedit: Get rid of the env lookup   Maxime Ripard
• [U-Boot] [RFC PATCH 02/10] env: Make env_driver_lookup_default private   Maxime Ripard
• [U-Boot] [RFC PATCH 03/10] env: Rename env_driver_lookup_default and env_get_default_location   Maxime Ripard
• [U-Boot] [RFC PATCH 04/10] env: Pass additional parameters to the env lookup function   Maxime Ripard
• [U-Boot] [RFC PATCH 05/10] env: Make the env save message a bit more explicit   Maxime Ripard
• [U-Boot] [RFC PATCH 06/10] env: Support multiple environments   Maxime Ripard
• [U-Boot] [RFC PATCH 07/10] env: Allow to build multiple environments in Kconfig   Maxime Ripard
• [U-Boot] [RFC PATCH 08/10] env: Mark env_get_location as weak   Maxime Ripard
• [U-Boot] [RFC PATCH 09/10] sunxi: Transition from the MMC to a FAT-based environment   Maxime Ripard
• [U-Boot] [RFC PATCH 10/10] env: sunxi: Enable FAT-based environment support by default   Maxime Ripard
• [U-Boot] [PATCH 3/4] sunxi: Add default partition scheme   Maxime Ripard
• [U-Boot] [PATCH 0/4] sunxi: Ease eMMC usage and flashing   Maxime Ripard
• [U-Boot] [PATCH 3/4] sunxi: Add default partition scheme   Maxime Ripard
• [U-Boot] [PATCH] sunxi: add support for Orange Pi R1 board   Maxime Ripard
• [U-Boot] [PATCH 3/4] sunxi: Add default partition scheme   Maxime Ripard
• [U-Boot] [PATCH 3/4] sunxi: Add default partition scheme   Maxime Ripard
• [U-Boot] [PATCH 3/4] sunxi: Add default partition scheme   Maxime Ripard
• [U-Boot] [PATCH 3/4] sunxi: Add default partition scheme   Maxime Ripard
• [U-Boot] [PATCH v5 1/2] sun50i: h5: Add NanoPi Neo Plus2 DT initial support   Maxime Ripard
• [U-Boot] [PATCH v5 2/2] arm64: sun50i-h5.dtsi : update to kernel 4.14   Maxime Ripard
• [U-Boot] [RFC PATCH 06/10] env: Support multiple environments   Maxime Ripard
• [U-Boot] [RFC PATCH 06/10] env: Support multiple environments   Maxime Ripard
• [U-Boot] [PATCH 3/4] sunxi: Add default partition scheme   Maxime Ripard
• [U-Boot] [PATCH v2 1/1] sunxi: Fix A20-OLinuXino-MICRO LAN8710 support   Maxime Ripard
• [U-Boot] [PATCH 3/4] sunxi: Add default partition scheme   Maxime Ripard
• [U-Boot] [PATCH v2 3/5] sunxi: Enable EMAC on the Cubietruck Plus   Maxime Ripard
• [U-Boot] [PATCH v2 3/5] sunxi: Enable EMAC on the Cubietruck Plus   Maxime Ripard
• [U-Boot] [PATCH 00/14] env: Multiple env support and env transition for sunxi   Maxime Ripard
• [U-Boot] [PATCH 01/14] cmd: nvedit: Get rid of the env lookup   Maxime Ripard
• [U-Boot] [PATCH 02/14] env: Rename env_driver_lookup_default and env_get_default_location   Maxime Ripard
• [U-Boot] [PATCH 03/14] env: Pass additional parameters to the env lookup function   Maxime Ripard
• [U-Boot] [PATCH 04/14] env: Make the env save message a bit more explicit   Maxime Ripard
• [U-Boot] [PATCH 05/14] env: Make it explicit where we're loading our environment from   Maxime Ripard
• [U-Boot] [PATCH 06/14] env: fat: Make the debug messages play a little nicer   Maxime Ripard
• [U-Boot] [PATCH 07/14] env: mmc: Make the debug messages play a little nicer   Maxime Ripard
• [U-Boot] [PATCH 08/14] env: common: Make the debug messages play a little nicer   Maxime Ripard
• [U-Boot] [PATCH 09/14] env: Support multiple environments   Maxime Ripard
• [U-Boot] [PATCH 10/14] env: Initialise all the environments   Maxime Ripard
• [U-Boot] [PATCH 11/14] env: Allow to build multiple environments in Kconfig   Maxime Ripard
• [U-Boot] [PATCH 12/14] env: Mark env_get_location as weak   Maxime Ripard
• [U-Boot] [PATCH 13/14] sunxi: Transition from the MMC to a FAT-based environment   Maxime Ripard
• [U-Boot] [PATCH 14/14] env: sunxi: Enable FAT-based environment support by default   Maxime Ripard
• [U-Boot] [PATCH 0/4] sunxi: Ease eMMC usage and flashing   Maxime Ripard
• [U-Boot] [PATCH 1/4] part: efi: Add a Kconfig option for the number of partition entries   Maxime Ripard
• [U-Boot] [PATCH 2/4] part: efi: Add default number of partition entries for sunxi   Maxime Ripard
• [U-Boot] [PATCH 3/4] sunxi: Add default partition scheme   Maxime Ripard
• [U-Boot] [PATCH 4/4] fastboot: Enable flashing by default on sunxi   Maxime Ripard
• [U-Boot] [PATCH 0/4] sunxi: Ease eMMC usage and flashing   Maxime Ripard
• [U-Boot] [PATCH 10/14] env: Initialise all the environments   Maxime Ripard
• [U-Boot] [PATCH] sunxi: video: HDMI: split VSYNC and HSYNC polarity settings   Maxime Ripard
• [U-Boot] [PATCH] arm64: dts: allwinner: a64: Add uart2-pins   Maxime Ripard
• [U-Boot] [PATCH] arm64: dts: allwinner: a64: Add uart2-pins   Maxime Ripard
• [U-Boot] [PATCH 1/2] arm64: dts: sun50i: a64: Add USB host node for bananapi-m64   Maxime Ripard
• [U-Boot] [PATCH 2/2] arm64: dts: sun50i: h5: Order nodes in alphabetic for orangepi-prime   Maxime Ripard
• [U-Boot] [PATCH 1/2] arm64: dts: sun50i: a64: Add USB host node for bananapi-m64   Maxime Ripard
• [U-Boot] [PATCH 3/4] sunxi: Add default partition scheme   Maxime Ripard
• [U-Boot] [PATCH 4/4] fastboot: Enable flashing by default on sunxi   Maxime Ripard
• [U-Boot] [PATCH 3/4] sunxi: Add default partition scheme   Maxime Ripard
• [U-Boot] [PATCH 4/4] fastboot: Enable flashing by default on sunxi   Maxime Ripard
• [U-Boot] mt25qu01g shares the same jedec id as n25q512a   Scott Roberts
• [U-Boot] Rainbow Screen of Death - Raspberry PI Current u-boot master   Peter Robinson
• [U-Boot] [PATCH v5 0/8] Add support for GE PPD   Peter Robinson
• [U-Boot] sunxi: SATA link timeout fix   Peter Robinson
• [U-Boot] [PATCH] envtools: make sure version/timestamp header file are available   Peter Robinson
• [U-Boot] [PATCH] omap2: set the ethaddr as well as the usbethaddr env var to ensure static MAC   Peter Robinson
• [U-Boot] U-Boot proper(not SPL) relocate option   Peter Robinson
• [U-Boot] [PATCH 00/23] imx: add i.MX8M support and i.MX8MQ EVK   Peter Robinson
• [U-Boot] [PATCH 1/1] configs: DISTRO_DEFAULTS for MACCHIATObin   Stefan Roese
• [U-Boot] powerpc 4xx support   Stefan Roese
• [U-Boot] Crash upon loading from non-existent USB device   Stefan Roese
• [U-Boot] [PATCH] x86: lib: Implement standalone __udivdi3 etc instead of libgcc ones   Stefan Roese
• [U-Boot] [PATCH] ARM: MV_EBU: Increase size of PCIe default mapping   Stefan Roese
• [U-Boot] [PATCH] arm: mvebu: theadorable_debug_defconfig: Enable setexpr command   Stefan Roese
• [U-Boot] [PATCH 1/1] configs: DISTRO_DEFAULTS for MACCHIATObin   Stefan Roese
• [U-Boot] [PATCH 1/3] mvebu: usb: xhci: a38x support   Stefan Roese
• [U-Boot] [PATCH 2/3] arm: mvebu: Add board_setup for xhci hardware   Stefan Roese
• [U-Boot] [PATCH 3/3] arm: mvebu: clearfog: enable XHCI USB   Stefan Roese
• [U-Boot] [PATCH RESEND v2 1/2] arm: mvebu: clearfog: Fix SPI-NOR flash access   Stefan Roese
• [U-Boot] [PATCH RESEND v2 2/2] arm: mvebu: clearfog: update SPI flash DT description   Stefan Roese
• [U-Boot] Please pull u-boot-marvell/master   Stefan Roese
• [U-Boot] [PATCH] x86: conga-qeval20-qa3-e3845: Adjust VGA rom address   Stefan Roese
• [U-Boot] [PATCH v2] x86: lib: Implement standalone __udivdi3 etc instead of libgcc ones   Stefan Roese
• [U-Boot] [PATCH] efi_loader: Exit in efi_set_bootdev() upon invalid "desc"   Stefan Roese
• [U-Boot] [PATCH v2] x86: lib: Implement standalone __udivdi3 etc instead of libgcc ones   Stefan Roese
• [U-Boot] "usb storage" command issues   Stefan Roese
• [U-Boot] [PATCH] Revert "x86: bootm: Fix FIT image booting on x86"   Stefan Roese
• [U-Boot] [PATCH v2] x86: lib: Implement standalone __udivdi3 etc instead of libgcc ones   Stefan Roese
• [U-Boot] [PATCH v2] x86: lib: Implement standalone __udivdi3 etc instead of libgcc ones   Stefan Roese
• [U-Boot] "usb storage" command issues   Stefan Roese
• [U-Boot] [PATCH v2] x86: lib: Implement standalone __udivdi3 etc instead of libgcc ones   Stefan Roese
• [U-Boot] [PATCH v2] x86: lib: Implement standalone __udivdi3 etc instead of libgcc ones   Stefan Roese
• [U-Boot] [PATCH v1] net: mvneta - Fixed recv() when multiple packets have arrived.   Stefan Roese
• [U-Boot] [PATCH] arm: mvebu: correct comments around cas_wl/cas_l   Stefan Roese
• [U-Boot] [PATCH v3] x86: lib: Implement standalone __udivdi3 etc instead of libgcc ones   Stefan Roese
• [U-Boot] [PATCH] dm: blk: Use uclass_find_first/next_device() in blk_first/next_device()   Stefan Roese
• [U-Boot] [PATCH v2] x86: lib: Implement standalone __udivdi3 etc instead of libgcc ones   Stefan Roese
• [U-Boot] "usb storage" command issues   Stefan Roese
• [U-Boot] [PATCH] mtd: cfi: Fix checking status register feature   Stefan Roese
• [U-Boot] [PATCH] fix: nand: pxa3xx: fix defined but not used warnings   Stefan Roese
• [U-Boot] [PATCH] arm: mvebu: add nand pins   Stefan Roese
• [U-Boot] [PATCH] arm: mvebu: fix boot from UART when in fallback mode   Stefan Roese
• [U-Boot] [PATCH] arm: mvebu: enable boot from NAND   Stefan Roese
• [U-Boot] [PATCH] arm64: mvebu: armada-7k/8k: drop useless #ifdef   Stefan Roese
• [U-Boot] [PATCH] arm: mvebu: correct comments around cas_wl/cas_l   Stefan Roese
• [U-Boot] Please pull u-boot-marvell/master   Stefan Roese
• [U-Boot] [PATCH v4 0/5] spi: cadence_spi: Adopt Linux DT bindings   Jason Rush
• [U-Boot] [PATCH v4 1/5] spi: cadence_spi: Sync DT bindings with Linux   Jason Rush
• [U-Boot] [PATCH v4 2/5] dts: cadence_spi: Sync DT bindings with Linux   Jason Rush
• [U-Boot] [PATCH v4 3/5] config: cadence_spi: Remove defines read from DT   Jason Rush
• [U-Boot] [PATCH v4 4/5] dts: k2g: Clean-up indentation   Jason Rush
• [U-Boot] [PATCH v4 5/5] dts: cadence_spi: Update documentation for DT bindings   Jason Rush
• [U-Boot] cadence_qspi_apb: cache issues on mach-socfpga   Rush, Jason A
• [U-Boot] cadence_qspi_apb: cache issues on mach-socfpga   Rush, Jason A
• [U-Boot] [PATCH] arm: zynq: Remove double const qualifier   Alex Sadovsky
• [U-Boot] [PATCH 1/1] ubifs: no NULL check needed before free   Alex Sadovsky
• [U-Boot] [PATCH v3 2/3] mx25: Select the ESDHC_A001 erratum   Otavio Salvador
• [U-Boot] [PATCH] gpt: add part-uuid and part-num subcommands   Otavio Salvador
• [U-Boot] [PATCH] gpt: add part-uuid and part-num subcommands   Otavio Salvador
• [U-Boot] [PATCH 1/6] pico-imx6ul: Move dfu_alt_info to CONFIG_DFU_ENV_SETTINGS variable   Otavio Salvador
• [U-Boot] [PATCH 2/6] pico-imx6ul: Use PARTUUID to specify the rootfs location   Otavio Salvador
• [U-Boot] [PATCH 3/6] pico-imx6ul: Add boot and rootfs dfu_alt_info   Otavio Salvador
• [U-Boot] [PATCH 4/6] pico-imx6ul: Define partition layout in the environment   Otavio Salvador
• [U-Boot] [PATCH 5/6] pico-imx6ul: Add function to create gpt partitions   Otavio Salvador
• [U-Boot] [PATCH 6/6] pico-imx6ul: Use FS_GENERIC load command   Otavio Salvador
• [U-Boot] [PATCH] u-boot: Upgrade to 2017.11 release   Otavio Salvador
• [U-Boot] [PATCH v2 1/6] pico-imx6ul: Move dfu_alt_info to CONFIG_DFU_ENV_SETTINGS variable   Otavio Salvador
• [U-Boot] [PATCH v2 2/6] pico-imx6ul: Use PARTUUID to specify the rootfs location   Otavio Salvador
• [U-Boot] [PATCH v2 3/6] pico-imx6ul: Add boot and rootfs dfu_alt_info   Otavio Salvador
• [U-Boot] [PATCH v2 4/6] pico-imx6ul: Define partition layout in the environment   Otavio Salvador
• [U-Boot] [PATCH v2 5/6] pico-imx6ul: Add function to create gpt partitions   Otavio Salvador
• [U-Boot] [PATCH v2 6/6] pico-imx6ul: Use FS_GENERIC load command   Otavio Salvador
• [U-Boot] [OE-core] [PATCH] u-boot: Upgrade to 2017.11 release   Otavio Salvador
• [U-Boot] [OE-core] [PATCH] u-boot: Upgrade to 2017.11 release   Otavio Salvador
• [U-Boot] UBI / UBIFS booting from NAND support   Jose Miguel Sanchez Sanabria
• [U-Boot] Running out of memory after setting invalid ethaddr   Thomas Schaefer
• [U-Boot] [PATCH] Revert "console: simplify puts()"   U. Scheffler
• [U-Boot] [PATCH 1/2] i2c: add Amlogic Meson driver   Heiko Schocher
• [U-Boot] [PATCH 2/2] odroid-c2: enable I2C   Heiko Schocher
• [U-Boot] [PATCH 1/1] ubifs: no NULL check needed before free   Heiko Schocher
• [U-Boot] [PATCH 1/1] ubi: no NULL check needed before kmem_cache_destroy   Heiko Schocher
• [U-Boot] Pull request: u-boot-ubi/master   Heiko Schocher
• [U-Boot] Fwd: Please pull from u-boot-i2c   Heiko Schocher
• [U-Boot] [PATCH 1/1] ubifs: avoid possible NULL dereference   Heiko Schocher
• [U-Boot] UBI / UBIFS booting from NAND support   Heiko Schocher
• [U-Boot] [PATCH] i2c: rcar_iic: Add RCar IIC driver   Heiko Schocher
• [U-Boot] [PATCH 12/23] imx: mx8m: add soc related settings and files   Heiko Schocher
• [U-Boot] [PATCH 12/23] imx: mx8m: add soc related settings and files   Heiko Schocher
• [U-Boot] [PATCH 00/13] manage protocols in a linked list   Heinrich Schuchardt
• [U-Boot] [PATCH 01/13] efi_loader: efi_bootmgr: do not make hidden assignments   Heinrich Schuchardt
• [U-Boot] [PATCH 1/1] efi_loader: manage protocols in a linked list   Heinrich Schuchardt
• [U-Boot] [PATCH 02/13] efi_loader: size of media device path node represenation   Heinrich Schuchardt
• [U-Boot] [PATCH 03/13] efi_loader: efi_dp_str should print path not node   Heinrich Schuchardt
• [U-Boot] [PATCH 04/13] efi_loader: fix efi_convert_device_node_to_text   Heinrich Schuchardt
• [U-Boot] [PATCH 05/13] efi_loader: reimplement LocateDevicePath   Heinrich Schuchardt
• [U-Boot] [PATCH 06/13] efi_selftest: test EFI_DEVICE_PATH_TO_TEXT_PROTOCOL   Heinrich Schuchardt
• [U-Boot] [PATCH 07/13] efi_loader: efi_disk: use efi_add_protocol   Heinrich Schuchardt
• [U-Boot] [PATCH 08/13] efi_loader: efi_net: use efi_add_protocol   Heinrich Schuchardt
• [U-Boot] [PATCH 09/13] efi_loader: efi_gop: use efi_add_protocol   Heinrich Schuchardt
• [U-Boot] [PATCH 10/13] efi_loader: simplify efi_open_protocol   Heinrich Schuchardt
• [U-Boot] [PATCH 11/13] efi_loader: simplify find_obj   Heinrich Schuchardt
• [U-Boot] [PATCH 12/13] efi_loader: manage protocols in a linked list   Heinrich Schuchardt
• [U-Boot] [PATCH 13/13] efi_selftest: compile without special compiler flags   Heinrich Schuchardt
• [U-Boot] [PATCH 2/9] efi_selftest: test protocol management   Heinrich Schuchardt
• [U-Boot] [PATCH v2 0/9] efi_loader: clean up protocol services   Heinrich Schuchardt
• [U-Boot] [PATCH v2 1/9] efi_loader: capitalize EFI_LOCATE_SEARCH_TYPE values   Heinrich Schuchardt
• [U-Boot] [PATCH v2 2/9] efi_selftest: test protocol management   Heinrich Schuchardt
• [U-Boot] [PATCH v2 3/9] efi_loader: eliminate efi_install_protocol_interface_ext   Heinrich Schuchardt
• [U-Boot] [PATCH v2 4/9] efi_loader: eliminate efi_uninstall_protocol_interface_ext   Heinrich Schuchardt
• [U-Boot] [PATCH v2 5/9] efi_loader: remove unused typedef for INTN   Heinrich Schuchardt
• [U-Boot] [PATCH v2 6/9] efi_loader: replace UINTN by efi_uintn_t   Heinrich Schuchardt
• [U-Boot] [PATCH v2 7/9] efi_loader: consistently use efi_uintn_t in boot services   Heinrich Schuchardt
• [U-Boot] [PATCH v2 8/9] efi_loader: rework efi_locate_handle   Heinrich Schuchardt
• [U-Boot] [PATCH v2 9/9] efi_loader: rework efi_search_obj   Heinrich Schuchardt
• [U-Boot] [PATCH 01/13] efi_loader: efi_bootmgr: do not make hidden assignments   Heinrich Schuchardt
• [U-Boot] [PATCH 12/13] efi_loader: manage protocols in a linked list   Heinrich Schuchardt
• [U-Boot] [PATCH 1/1] efi_loader: manage protocols in a linked list   Heinrich Schuchardt
• [U-Boot] [PATCH v4 12/18] efi_selftest: correctly cleanup after selftest   Heinrich Schuchardt
• [U-Boot] [PATCH 17/18] efi_loader: refactor efi_setup_loaded_image   Heinrich Schuchardt
• [U-Boot] [PATCH 1/1] scripts/ld-version.sh: regular expression compile fails   Heinrich Schuchardt
• [U-Boot] [PATCH 1/1] kconfig/symbol.c: use correct pointer type argument for sizeof   Heinrich Schuchardt
• [U-Boot] [PATCH 1/1] ubifs: no NULL check needed before free   Heinrich Schuchardt
• [U-Boot] [PATCH 1/1] ubi: no NULL check needed before kmem_cache_destroy   Heinrich Schuchardt
• [U-Boot] [PATCH 1/1] yaffs2: rework yaffs_new_obj_id   Heinrich Schuchardt
• [U-Boot] [PATCH 1/1] yaffs2: iterator variable cannot be NULL   Heinrich Schuchardt
• [U-Boot] [PATCH v2 1/1] scripts/ld-version.sh: regular expression compile fails   Heinrich Schuchardt
• [U-Boot] [PATCH v2 1/1] yaffs2: rework yaffs_new_obj_id   Heinrich Schuchardt
• [U-Boot] [PATCH 1/1] efi_loader: helloworld.c: remove superfluous include   Heinrich Schuchardt
• [U-Boot] [PATCH 1/1] kconfig/symbol.c: use correct pointer type argument for sizeof   Heinrich Schuchardt
• [U-Boot] [PATCH 1/1] scripts/coccinelle: add some more coccinelle tests   Heinrich Schuchardt
• [U-Boot] [PATCH 1/1] Makefile: add coccicheck target   Heinrich Schuchardt
• [U-Boot] [PATCH 1/1] malloc: compare pointer to NULL not to 0.   Heinrich Schuchardt
• [U-Boot] [PATCH 1/1] x86: don't compare pointers to 0   Heinrich Schuchardt
• [U-Boot] [PATCH 1/1] mmc: sdhci: do not compare pointer to 0   Heinrich Schuchardt
• [U-Boot] [PATCH v2 1/1] malloc: don't compare pointers to 0   Heinrich Schuchardt
• [U-Boot] Move Cache-As-RAM memory from area mapped to ROM in QEMU   Heinrich Schuchardt
• [U-Boot] [PATCH v2 00/18] manage protocols in a linked list   Heinrich Schuchardt
• [U-Boot] [PATCH v2 01/18] efi_loader: efi_bootmgr: do not make hidden assignments   Heinrich Schuchardt
• [U-Boot] [PATCH v2 02/18] efi_loader: size of media device path node represenation   Heinrich Schuchardt
• [U-Boot] [PATCH v2 03/18] efi_loader: efi_dp_str should print path not node   Heinrich Schuchardt
• [U-Boot] [PATCH v2 04/18] efi_loader: fix efi_convert_device_node_to_text   Heinrich Schuchardt
• [U-Boot] [PATCH v2 05/18] efi_loader: reimplement LocateDevicePath   Heinrich Schuchardt
• [U-Boot] [PATCH v2 06/18] efi_selftest: test EFI_DEVICE_PATH_TO_TEXT_PROTOCOL   Heinrich Schuchardt
• [U-Boot] [PATCH v2 07/18] efi_loader: efi_disk: use efi_add_protocol   Heinrich Schuchardt
• [U-Boot] [PATCH v2 08/18] efi_loader: efi_net: use efi_add_protocol   Heinrich Schuchardt
• [U-Boot] [PATCH v2 09/18] efi_loader: efi_gop: use efi_add_protocol   Heinrich Schuchardt
• [U-Boot] [PATCH v2 10/18] efi_loader: simplify efi_open_protocol   Heinrich Schuchardt
• [U-Boot] [PATCH v2 11/18] efi_loader: simplify find_obj   Heinrich Schuchardt
• [U-Boot] [PATCH v2 12/18] efi_loader: manage protocols in a linked list   Heinrich Schuchardt
• [U-Boot] [PATCH v2 13/18] efi_selftest: compile without special compiler flags   Heinrich Schuchardt
• [U-Boot] [PATCH v2 14/18] efi_selftest: add missing line feed   Heinrich Schuchardt
• [U-Boot] [PATCH v2 15/18] efi_loader: output load options in helloworld   Heinrich Schuchardt
• [U-Boot] [PATCH v2 16/18] test/py: check return code of helloworld   Heinrich Schuchardt
• [U-Boot] [PATCH v2 17/18] efi_loader: pass handle of loaded image   Heinrich Schuchardt
• [U-Boot] [PATCH v2 18/18] efi_loader: helper function to add EFI object to list   Heinrich Schuchardt
• [U-Boot] [PATCH 1/1] configs: DISTRO_DEFAULTS for MACCHIATObin   Heinrich Schuchardt
• [U-Boot] [PATCH v2] spi: kirkwood: avoid divide by zero crash   Heinrich Schuchardt
• [U-Boot] [PATCH 1/1] rockchip: spi: the symbol for Hertz is Hz   Heinrich Schuchardt
• [U-Boot] [PATCH 1/1] omap3: spi: the symbol for Hertz is Hz   Heinrich Schuchardt
• [U-Boot] [PATCH v2 1/1] malloc: don't compare pointers to 0   Heinrich Schuchardt
• [U-Boot] [PATCH 1/1] Makefile: add coccicheck target   Heinrich Schuchardt
• [U-Boot] Move Cache-As-RAM memory from area mapped to ROM in QEMU   Heinrich Schuchardt
• [U-Boot] [PATCH] efi_loader: Exit in efi_set_bootdev() upon invalid "desc"   Heinrich Schuchardt
• [U-Boot] [PATCH v2 01/18] efi_loader: efi_bootmgr: do not make hidden assignments   Heinrich Schuchardt
• [U-Boot] [PATCH v2 05/18] efi_loader: reimplement LocateDevicePath   Heinrich Schuchardt
• [U-Boot] [PATCH v2 06/18] efi_selftest: test EFI_DEVICE_PATH_TO_TEXT_PROTOCOL   Heinrich Schuchardt
• [U-Boot] [PATCH v2 07/18] efi_loader: efi_disk: use efi_add_protocol   Heinrich Schuchardt
• [U-Boot] [PATCH v2 18/18] efi_loader: helper function to add EFI object to list   Heinrich Schuchardt
• [U-Boot] [PATCH 1/1] vsprintf.c: add EFI device path printing   Heinrich Schuchardt
• [U-Boot] [PATCH v2 1/1] Makefile: add coccicheck target   Heinrich Schuchardt
• [U-Boot] [PATCH 1/1] vsprintf.c: add EFI device path printing   Heinrich Schuchardt
• [U-Boot] [PATCH] Kconfig: Introduce USE_BOOTCOMMAND and migrate BOOTCOMMAND   Heinrich Schuchardt
• [U-Boot] [PATCH 1/1] x86: enable DISTRO_DEFAULTS for qemu   Heinrich Schuchardt
• [U-Boot] [PATCH 1/1] common: command: tempory buffer should have size of command line buf   Heinrich Schuchardt
• [U-Boot] [PATCH 1/1] cmd: blk: remove unreachable code   Heinrich Schuchardt
• [U-Boot] [PATCH 1/1] dm: usb: ehci: avoid possible NULL dereference   Heinrich Schuchardt
• [U-Boot] [PATCH 1/1] fs: avoid possible NULL dereference in fs_devread   Heinrich Schuchardt
• [U-Boot] [PATCH 1/1] dm: usb: ehci: avoid possible NULL dereference   Heinrich Schuchardt
• [U-Boot] [PATCH 1/1] vsprintf.c: add EFI device path printing   Heinrich Schuchardt
• [U-Boot] [PATCH v2 1/1] dm: usb: ehci: avoid possible NULL dereference   Heinrich Schuchardt
• [U-Boot] [PATCH v2 1/1] x86: don't compare pointers to 0   Heinrich Schuchardt
• [U-Boot] [PATCH 1/1] ubifs: no NULL check needed before free   Heinrich Schuchardt
• [U-Boot] [PATCH 1/1] ubifs: avoid possible NULL dereference   Heinrich Schuchardt
• [U-Boot] arch/x86/include/asm/atomic.h: error: expected string literal   Heinrich Schuchardt
• [U-Boot] [PATCH 1/1] ubifs: avoid possible NULL dereference   Heinrich Schuchardt
• [U-Boot] [PATCH 1/1] ubifs: avoid possible NULL dereference   Heinrich Schuchardt
• [U-Boot] [PATCH v2 1/1] ubifs: avoid possible NULL dereference   Heinrich Schuchardt
• [U-Boot] [PATCH v2 1/1] ubifs: avoid possible NULL dereference   Heinrich Schuchardt
• [U-Boot] [PATCH 1/1] efi_loader: handling NULL in efi_convert_device_path_to_text   Heinrich Schuchardt
• [U-Boot] [PATCH 1/1] efi_loader: comments for EFI_DEVICE_PATH_TO_TEXT_PROTOCOL   Heinrich Schuchardt
• [U-Boot] [PATCH 1/1] vsprintf.c: add EFI device path printing   Heinrich Schuchardt
• [U-Boot] [PATCH v2 1/1] vsprintf.c: add EFI device path printing   Heinrich Schuchardt
• [U-Boot] [PATCH 1/1] distro bootcmd: define bootloader name for x86   Heinrich Schuchardt
• [U-Boot] EFI: incorrect device paths   Heinrich Schuchardt
• [U-Boot] EFI: incorrect device paths   Heinrich Schuchardt
• [U-Boot] [PATCH 1/1] vsprintf.c: add EFI device path printing   Heinrich Schuchardt
• [U-Boot] [PATCH v3 00/18] efi_loader: manage protocols in a linked list (v3)   Heinrich Schuchardt
• [U-Boot] [PATCH v3 01/18] efi_loader: helloworld.c: remove superfluous include   Heinrich Schuchardt
• [U-Boot] [PATCH v3 02/18] efi_loader: size of media device path node represenation   Heinrich Schuchardt
• [U-Boot] [PATCH v3 03/18] efi_loader: efi_dp_str should print path not node   Heinrich Schuchardt
• [U-Boot] [PATCH v3 04/18] efi_loader: fix efi_convert_device_node_to_text   Heinrich Schuchardt
• [U-Boot] [PATCH v3 05/18] efi_loader: reimplement LocateDevicePath   Heinrich Schuchardt
• [U-Boot] [PATCH v3 06/18] efi_selftest: test EFI_DEVICE_PATH_TO_TEXT_PROTOCOL   Heinrich Schuchardt
• [U-Boot] [PATCH v3 07/18] efi_loader: efi_disk: use efi_add_protocol   Heinrich Schuchardt
• [U-Boot] [PATCH v3 08/18] efi_loader: efi_net: use efi_add_protocol   Heinrich Schuchardt
• [U-Boot] [PATCH v3 09/18] efi_loader: efi_gop: use efi_add_protocol   Heinrich Schuchardt
• [U-Boot] [PATCH v3 10/18] efi_loader: simplify efi_open_protocol   Heinrich Schuchardt
• [U-Boot] [PATCH v3 11/18] efi_loader: simplify find_obj   Heinrich Schuchardt
• [U-Boot] [PATCH v3 12/18] efi_loader: manage protocols in a linked list   Heinrich Schuchardt
• [U-Boot] [PATCH v3 13/18] efi_selftest: compile without special compiler flags   Heinrich Schuchardt
• [U-Boot] [PATCH v3 14/18] efi_selftest: add missing line feed   Heinrich Schuchardt
• [U-Boot] [PATCH v3 15/18] efi_loader: output load options in helloworld   Heinrich Schuchardt
• [U-Boot] [PATCH v3 16/18] test/py: check return code of helloworld   Heinrich Schuchardt
• [U-Boot] [PATCH v3 17/18] efi_loader: pass handle of loaded image   Heinrich Schuchardt
• [U-Boot] [PATCH v3 18/18] efi_loader: helper function to add EFI object to list   Heinrich Schuchardt
• [U-Boot] [PATCH 1/1] vsprintf.c: add EFI device path printing   Heinrich Schuchardt
• [U-Boot] [PATCH 1/1] vsprintf.c: add EFI device path printing   Heinrich Schuchardt
• [U-Boot] [PATCH 1/1] x86: enable DISTRO_DEFAULTS for qemu   Heinrich Schuchardt
• [U-Boot] [PATCH] efi_loader: add missing breaks   Heinrich Schuchardt
• [U-Boot] [RFC PATCH 04/10] env: Pass additional parameters to the env lookup function   Quentin Schulz
• [U-Boot] [PATCH 10/14] env: Initialise all the environments   Quentin Schulz
• [U-Boot] [PATCH 0/3] MIPS: Caching fixes   Daniel Schwierzeck
• [U-Boot] [PATCH] boston: Add u-boot.mcs make target   Daniel Schwierzeck
• [U-Boot] [PATCH] boston: Set CONFIG_SYS_LOAD_ADDR to 0x88000000   Daniel Schwierzeck
• [U-Boot] [PATCH 3/8] pci: xilinx: Initialise the root bridge during probe   Daniel Schwierzeck
• [U-Boot] [PATCH 7/8] net: pch_gbe: Use wait_for_bit() helper   Daniel Schwierzeck
• [U-Boot] [PATCH 6/8] net: pch_gbe: Support PHY reset GPIOs   Daniel Schwierzeck
• [U-Boot] [PATCH 5/8] gpio: eg20t: Add driver for Intel EG20T GPIO controllers   Daniel Schwierzeck
• [U-Boot] [PATCH 4/8] gpio: Provide dummy get/request & is_valid functions   Daniel Schwierzeck
• [U-Boot] [PATCH 1/8] pci: Make PCI bridge memory alignment configurable   Daniel Schwierzeck
• [U-Boot] [PATCH v2] boston: Add u-boot.mcs make target   Daniel Schwierzeck
• [U-Boot] [GIT PULL] u-boot-mips/master   Daniel Schwierzeck
• [U-Boot] [PULL] u-boot-mips/master   Daniel Schwierzeck
• [U-Boot] [PATCH v1] x86: tangier: Use official ACPI HID for FLIS IP   Andy Shevchenko
• [U-Boot] [PATCH v1] x86: tangier: Use official ACPI HID for FLIS IP   Andy Shevchenko
• [U-Boot] [PATCH v1] x86: tangier: Use official ACPI HID for FLIS IP   Andy Shevchenko
• [U-Boot] Intel Edison build warning   Andy Shevchenko
• [U-Boot] Intel Edison build warning   Andy Shevchenko
• [U-Boot] [PATCH 1/3] mvebu: usb: xhci: a38x support   Baruch Siach
• [U-Boot] [PATCH 2/3] arm: mvebu: Add board_setup for xhci hardware   Baruch Siach
• [U-Boot] [PATCH 3/3] arm: mvebu: clearfog: enable XHCI USB   Baruch Siach
• [U-Boot] [PATCH] spi: kirkwood: avoid divide by zero crash   Baruch Siach
• [U-Boot] [PATCH] dm: core: fix member name in ofnode_union documentation   Baruch Siach
• [U-Boot] [PATCH] cmd: sf: remove useless pointer assignment   Baruch Siach
• [U-Boot] [PATCH 1/2] arm: mvebu: clearfog: Fix SPI-NOR flash access   Baruch Siach
• [U-Boot] [PATCH 2/2] arm: mvebu: clearfog: update SPI flash DT description   Baruch Siach
• [U-Boot] [PATCH v2] spi: kirkwood: avoid divide by zero crash   Baruch Siach
• [U-Boot] [PATCH RESEND v2 1/2] arm: mvebu: clearfog: Fix SPI-NOR flash access   Baruch Siach
• [U-Boot] [PATCH RESEND v2 2/2] arm: mvebu: clearfog: update SPI flash DT description   Baruch Siach
• [U-Boot] [PATCH v2] spi: kirkwood: avoid divide by zero crash   Baruch Siach
• [U-Boot] [PATCH] arm64: mvebu: armada-7k/8k: drop useless #ifdef   Baruch Siach
• [U-Boot] [PATCH] scsi: ceva: Start port in probe   Michal Simek
• [U-Boot] [PATCH] ata: Fix ahci wording   Michal Simek
• [U-Boot] [PATCH 1/9] arm: zynq: Add SCL & SDA GPIO entries for recovery   Michal Simek
• [U-Boot] [PATCH 2/9] arm: zynq: Add device-type property for zynq ethernet phy nodes   Michal Simek
• [U-Boot] [PATCH 3/9] arm: zynq: Remove empty ifdef env structures from config file   Michal Simek
• [U-Boot] [PATCH 4/9] arm: zynq: Sync location of DT properties with Linux   Michal Simek
• [U-Boot] [PATCH 5/9] arm: zynq: Enable bootz command for Xilinx platforms   Michal Simek
• [U-Boot] [PATCH 6/9] arm: zynq: Enable debug console on zc770 xm010 by default   Michal Simek
• [U-Boot] [PATCH 7/9] arm: zynq: Enable MACRONIX flash for zc702/zc706/zc770 xm010   Michal Simek
• [U-Boot] [PATCH 8/9] arm: zynq: Enable qspi for zc770_xm013   Michal Simek
• [U-Boot] [PATCH 9/9] arm: zynq: Add board support for cc108   Michal Simek
• [U-Boot] [GIT PULL] Xilinx fix for v2017.11   Michal Simek
• [U-Boot] [PATCH 1/5] arm: zynq: Return value from fdtdec_setup_memory_banksize directly   Michal Simek
• [U-Boot] [PATCH 2/5] arm: zynq: Enable FPGA/FPGA_XILINX via Kconfig   Michal Simek
• [U-Boot] [PATCH 3/5] arm: zynq: Move ZYNQ_SERIAL to Kconfig   Michal Simek
• [U-Boot] [PATCH 4/5] arm: zynq: Sort dts names   Michal Simek
• [U-Boot] [PATCH 5/5] arm: zynq: Add mini u-boot configuration for zynq   Michal Simek
• [U-Boot] [PATCH 01/11] arm64: zynqmp: Remove slcr with mio status pin detection   Michal Simek
• [U-Boot] [PATCH 02/11] arm64: zynqmp: mp: Correct the R5 release sequence   Michal Simek
• [U-Boot] [PATCH 03/11] arm64: zynqmp: Provide a Kconfig option to use specified memory for MMU table   Michal Simek
• [U-Boot] [PATCH 04/11] tools: mkimage: Extend mkimage to also include pmufw   Michal Simek
• [U-Boot] [PATCH 05/11] arm64: zynqmp: Enable config DEFINE_TCM_OCM_MMAP if CONFIG_MP defined   Michal Simek
• [U-Boot] [PATCH 06/11] arm64: zynqmp: Add SD1 level shifter mode to alternative selection   Michal Simek
• [U-Boot] [PATCH 07/11] arm64: zynqmp: Use u32 type instead of uint32_t   Michal Simek
• [U-Boot] [PATCH 08/11] arm64: zynqmp: Add support for CG/EG/EV device detection   Michal Simek
• [U-Boot] [PATCH 09/11] arm64: zynqmp: Add new ID for RFSoC   Michal Simek
• [U-Boot] [PATCH 10/11] arm64: zynqmp: Enable debug uart for zc1751 dc5   Michal Simek
• [U-Boot] [PATCH 11/11] arm64: zynqmp: Wire QSPI boot mode for SPL   Michal Simek
• [U-Boot] [PATCH 00/40] zynqmp: arm64: DT changes   Michal Simek
• [U-Boot] [PATCH 01/40] arm64: zynqmp: Add references to cpu nodes   Michal Simek
• [U-Boot] [PATCH 02/40] arm64: zynqmp: Update the OPPs for cpu freq   Michal Simek
• [U-Boot] [PATCH 03/40] arm64: zynqmp: DT: Fix typo in idle-states node definition   Michal Simek
• [U-Boot] [PATCH 04/40] arm64: zynqmp: Reduced min-residency time for idle state node   Michal Simek
• [U-Boot] [PATCH 05/40] arm64: zynqmp: PM: Add IRQ   Michal Simek
• [U-Boot] [PATCH 06/40] arm64: zynqmp: Fix broken architected timer interrupt trigger   Michal Simek
• [U-Boot] [PATCH 07/40] arm64: zynqmp: Label whole PL part as fpga_full region   Michal Simek
• [U-Boot] [PATCH 08/40] arm64: zynqmp: Add clock name for GPU   Michal Simek
• [U-Boot] [PATCH 09/40] arm64: zynqmp: Update the GPU address size   Michal Simek
• [U-Boot] [PATCH 10/40] arm64: zynqmp: Add missing gpio property to dtsi   Michal Simek
• [U-Boot] [PATCH 11/40] arm64: dts: xilinx: fix PCI bus dtc warnings   Michal Simek
• [U-Boot] [PATCH 12/40] arm64: zynqmp: Add SMMU support for SATA IP   Michal Simek
• [U-Boot] [PATCH 13/40] arm64: zynqmp: rtc: Add calibration   Michal Simek
• [U-Boot] [PATCH 14/40] arm64: zynqmp: disable smmu   Michal Simek
• [U-Boot] [PATCH 15/40] arm64: zynqmp: PM: Specify power domains for DP related nodes   Michal Simek
• [U-Boot] [PATCH 16/40] arm64: zynqmp: Use revision in dts file description   Michal Simek
• [U-Boot] [PATCH 17/40] arm64: zynqmp: Add revB string to compatible string   Michal Simek
• [U-Boot] [PATCH 18/40] arm64: zynqmp: Update device tree for gpio   Michal Simek
• [U-Boot] [PATCH 19/40] arm64: zynqmp: zcu102: Modifying GTR lane-0 to PCIe   Michal Simek
• [U-Boot] [PATCH 20/40] arm64: zynqmp: Add missing alias for gem0 for ep108   Michal Simek
• [U-Boot] [PATCH 21/40] arm64: zynqmp: Remove leading 0s from mtd table for spi flashes   Michal Simek
• [U-Boot] [PATCH 22/40] arm64: zynqmp: Use SPDX license with dc4   Michal Simek
• [U-Boot] [PATCH 23/40] arm64: zynqmp: Remove local-mac-address from dtsi file   Michal Simek
• [U-Boot] [PATCH 24/40] arm64: zynqmp: Update device tree for pinmux   Michal Simek
• [U-Boot] [PATCH 25/40] arm64: zynqmp: Add support for zcu102 1.0 rev   Michal Simek
• [U-Boot] [PATCH 26/40] arm64: zynqmp: Add support for zynqmp nvmem firmware driver   Michal Simek
• [U-Boot] [PATCH 27/40] arm64: zynqmp: Remove tx_termination_fix detection on silicon v1   Michal Simek
• [U-Boot] [PATCH 28/40] arm64: zynqmp: Add reset-controller support in serdes driver   Michal Simek
• [U-Boot] [PATCH 29/40] arm64: zynqmp: Use reset controller framework for asserting/de-asserting reset   Michal Simek
• [U-Boot] [PATCH 30/40] arm64: zynqmp: sdhci: set host quirk2 for no 1.8V support for 1.0 silicon   Michal Simek
• [U-Boot] [PATCH 31/40] arm64: zynqmp: dt: Add AMS node   Michal Simek
• [U-Boot] [PATCH 32/40] arm64: zynqmp: Move nodes which have no reg property out of bus   Michal Simek
• [U-Boot] [PATCH 33/40] arm64: zynqmp: Add support reading SoC revision using nvmem driver in dwc3   Michal Simek
• [U-Boot] [PATCH 34/40] arm64: zynqmp: Enabled CCI support for USB   Michal Simek
• [U-Boot] [PATCH 35/40] arm64: zynqmmp: Add USB OTG interrupts support in dt   Michal Simek
• [U-Boot] [PATCH 36/40] arm64: zynqmp: Uncomment snps, quirk-frame-length-adjustment flag in dwc3   Michal Simek
• [U-Boot] [PATCH 37/40] arm64: zynqmp: Remove clock setting from dtsi   Michal Simek
• [U-Boot] [PATCH 38/40] arm64: zynqmp: usb: Correct IOMMU node for making SMMU work with USB   Michal Simek
• [U-Boot] [PATCH 39/40] arm64: zynqmp: Add note about si5328 interrupt   Michal Simek
• [U-Boot] [PATCH 40/40] arm64: zynqmp: Enable watchdog by default   Michal Simek
• [U-Boot] [PATCH v2] mtd: nand: zynq: Add a config option to use 1st stage bootloader timing   Michal Simek
• [U-Boot] [PATCH v2] ARM: zynq: Add support for SYZYGY Hub board   Michal Simek
• [U-Boot] [PATCH] ni: Add NIZYNQ platform   Michal Simek
• [U-Boot] [PATCH] mtd: zynq: nand: Move board_nand_init() function to board.c   Michal Simek
• [U-Boot] [PATCH] arm64: zynqmp: Add revision to identification string   Michal Simek
• [U-Boot] [PATCH] mtd: zynq: nand: Move board_nand_init() function to board.c   Michal Simek
• [U-Boot] [PATCH 1/3] net: xilinx_axi_emac: Use wait_for_bit instead of while loop   Michal Simek
• [U-Boot] [PATCH 2/3] net: xilinx_axi_emac: Read dma address using fdtdec_get_addr   Michal Simek
• [U-Boot] [PATCH 3/3] net: xilinx_axi_emac: Add support for non processor mode   Michal Simek
• [U-Boot] [PATCH 0/9] arm: zynq: ps7* consolidation   Michal Simek
• [U-Boot] [PATCH 1/9] arm: zynq: Add missing ps7_post_config declaration   Michal Simek
• [U-Boot] [PATCH 2/9] arm: zynq: Enable debug uart on zc706   Michal Simek
• [U-Boot] [PATCH 3/9] arm: zynq: Remove ps7_debug code   Michal Simek
• [U-Boot] [PATCH 4/9] arm: zynq: Move ps7_* to separate file   Michal Simek
• [U-Boot] [PATCH 5/9] arm: zynq: Get rid of ps7_reset_apu() for syzygy board   Michal Simek
• [U-Boot] [PATCH 6/9] arm: zynq: Move common ps7_init* initialization to arch code   Michal Simek
• [U-Boot] [PATCH 7/9] arm: zynq: Add ps7GetSiliconVersion() to ps7_spl_init   Michal Simek
• [U-Boot] [PATCH 8/9] arm: zynq: Convert EMIT_WRITE to EMIT_MASKWRITE   Michal Simek
• [U-Boot] [PATCH 9/9] arm: zynq: Convert all board to use arch ps7_init code   Michal Simek
• [U-Boot] [PATCH] test/py: Add dependency on HUSH parser   Michal Simek
• [U-Boot] [PATCH] arm: zynq: Remove double const qualifier   Michal Simek
• [U-Boot] [PATCH] arm: zynq: Use unsigned type with comparison with ARRAY_SIZE   Michal Simek
• [U-Boot] [PATCH] arm: zynq: Add ps7_init for cc108   Michal Simek
• [U-Boot] [PATCH 1/2] arm: zynq: Do not show information from checkboard twice   Michal Simek
• [U-Boot] [PATCH 2/2] arm: zynq: Show information about silicon version   Michal Simek
• [U-Boot] [PATCH 0/9] arm: zynq: ps7* consolidation   Michal Simek
• [U-Boot] [PATCH 0/9] arm: zynq: ps7* consolidation   Michal Simek
• [U-Boot] [PATCH v2 0/9] arm: zynq: ps7* consolidation   Michal Simek
• [U-Boot] [PATCH v2 1/9] arm: zynq: Add missing ps7_post_config declaration   Michal Simek
• [U-Boot] [PATCH v2 2/9] arm: zynq: Enable debug uart on zc706   Michal Simek
• [U-Boot] [PATCH v2 3/9] arm: zynq: Remove ps7_debug code   Michal Simek
• [U-Boot] [PATCH v2 4/9] arm: zynq: Move ps7_* to separate file   Michal Simek
• [U-Boot] [PATCH v2 5/9] arm: zynq: Get rid of ps7_reset_apu() for syzygy board   Michal Simek
• [U-Boot] [PATCH v2 6/9] arm: zynq: Move common ps7_init* initialization to arch code   Michal Simek
• [U-Boot] [PATCH v2 7/9] arm: zynq: Add ps7GetSiliconVersion() to ps7_spl_init   Michal Simek
• [U-Boot] [PATCH v2 8/9] arm: zynq: Add support for EMIT_WRITE operation   Michal Simek
• [U-Boot] [PATCH v2 9/9] arm: zynq: Convert all board to use arch ps7_init code   Michal Simek
• [U-Boot] [PATCH v2] arm: zynq: Add ps7_init for cc108   Michal Simek
• [U-Boot] [PATCH] test/py: Add dependency on HUSH parser   Michal Simek
• [U-Boot] [PATCH v2] mtd: zynq: nand: Move board_nand_init() function to board.c   Michal Simek
• [U-Boot] [RESEND PATCH] mtd: nand: zynq: Add support for the NAND lock/unlock operation   Michal Simek
• [U-Boot] [PATCH 5/5] arm: zynq: Add mini u-boot configuration for zynq   Michal Simek
• [U-Boot] [PATCH] arm: zynq: Remove double const qualifier   Michal Simek
• [U-Boot] [PATCH 04/11] tools: mkimage: Extend mkimage to also include pmufw   Michal Simek
• [U-Boot] [PATCH v2 01/11] arm64: zynqmp: Remove slcr with mio status pin detection   Michal Simek
• [U-Boot] [PATCH v2 02/11] arm64: zynqmp: mp: Correct the R5 release sequence   Michal Simek
• [U-Boot] [PATCH v2 03/11] arm64: zynqmp: Provide a Kconfig option to use specified memory for MMU table   Michal Simek
• [U-Boot] [PATCH v2 04/11] tools: mkimage: Extend mkimage to also include pmufw   Michal Simek
• [U-Boot] [PATCH v2 05/11] arm64: zynqmp: Enable config DEFINE_TCM_OCM_MMAP if CONFIG_MP defined   Michal Simek
• [U-Boot] [PATCH v2 06/11] arm64: zynqmp: Add SD1 level shifter mode to alternative selection   Michal Simek
• [U-Boot] [PATCH v2 07/11] arm64: zynqmp: Use u32 type instead of uint32_t   Michal Simek
• [U-Boot] [PATCH v2 08/11] arm64: zynqmp: Add support for CG/EG/EV device detection   Michal Simek
• [U-Boot] [PATCH v2 09/11] arm64: zynqmp: Add new ID for RFSoC   Michal Simek
• [U-Boot] [PATCH v2 10/11] arm64: zynqmp: Enable debug uart for zc1751 dc5   Michal Simek
• [U-Boot] [PATCH v2 11/11] arm64: zynqmp: Wire QSPI boot mode for SPL   Michal Simek
• [U-Boot] [PATCH] ni: Add NIZYNQ platform   Michal Simek
• [U-Boot] [PATCH 3/8] pci: xilinx: Initialise the root bridge during probe   Michal Simek
• [U-Boot] [PATCH] arm: zynq: Change Zynq/ZynqMP Kconfig description   Michal Simek
• [U-Boot] [PATCH] ni: Add NIZYNQ platform   Michal Simek
• [U-Boot] [PATCH] fpga: allow programming fpga from FIT image for all FPGA drivers   Michal Simek
• [U-Boot] [PATCH] fpga: allow programming fpga from FIT image for all FPGA drivers   Michal Simek
• [U-Boot] [PATCH] fpga: allow programming fpga from FIT image for all FPGA drivers   Michal Simek
• [U-Boot] [PATCH] net: xilinx_axi_emac: Use readl and writel for io ops   Michal Simek
• [U-Boot] [PATCH] net: zynq_gem: Dont enable SGMII and PCS selection   Michal Simek
• [U-Boot] [GIT PULL] Xilinx changes for v2018.01   Michal Simek
• [U-Boot] [PATCH v2] test/py: Setup variables based on HUSH selection   Michal Simek
• [U-Boot] [PATCH] test/py: Add dependency on HUSH parser   Michal Simek
• [U-Boot] [PATCH] sf: ensure flash device is in 3-byte address mode   Goldschmidt Simon
• [U-Boot] [U-Boot, 2/3] rockchip: doc: update U-Boot location info   Goldschmidt Simon
• [U-Boot] [U-Boot, 2/3] rockchip: doc: update U-Boot location info   Goldschmidt Simon
• [U-Boot] [PATCH] rockchip: doc: update U-Boot location info   Goldschmidt Simon
• [U-Boot] [PATCH] fpga: allow programming fpga from FIT image for all FPGA drivers   Goldschmidt Simon
• [U-Boot] [PATCH v2] spi: kirkwood: avoid divide by zero crash   Goldschmidt Simon
• [U-Boot] spi: cadence_qspi_apb: cache issues on mach-socfpga   Goldschmidt Simon
• [U-Boot] [PATCH 0/2] spi: cadence_spi_apb: fix using bouncebuf with writeback dcache   Goldschmidt Simon
• [U-Boot] [PATCH 1/2] common: make bouncebuf work for non-DMA transfers   Goldschmidt Simon
• [U-Boot] [PATCH 2/2] spi: cadence_spi_apb: fix using bouncebuf with writeback dcache   Goldschmidt Simon
• [U-Boot] cadence_qspi_apb: cache issues on mach-socfpga   Goldschmidt Simon
• [U-Boot] [PATCH 1/2] common: make bouncebuf work for non-DMA transfers   Goldschmidt Simon
• [U-Boot] [PATCH 1/2] common: make bouncebuf work for non-DMA transfers   Goldschmidt Simon
• [U-Boot] cadence_qspi_apb: cache issues on mach-socfpga   Goldschmidt Simon
• [U-Boot] [PATCH 1/2] common: make bouncebuf work for non-DMA transfers   Goldschmidt Simon
• [U-Boot] [PATCH 1/2] common: make bouncebuf work for non-DMA transfers   Goldschmidt Simon
• [U-Boot] [PATCH] Revert "spi: cadence_qspi_apb: Use 32 bit indirect read transaction when possible"   Goldschmidt Simon
• [U-Boot] [PATCH v4 1/5] spi: cadence_spi: Sync DT bindings with Linux   Goldschmidt Simon
• [U-Boot] [PATCH v4 2/5] dts: cadence_spi: Sync DT bindings with Linux   Goldschmidt Simon
• [U-Boot] [PATCH v4 3/5] config: cadence_spi: Remove defines read from DT   Goldschmidt Simon
• [U-Boot] [PATCH v2] Revert "spi: cadence_qspi_apb: Use 32 bit indirect read transaction when possible"   Goldschmidt Simon
• [U-Boot] Working with patchwork   Goldschmidt Simon
• [U-Boot] Working with patchwork   Goldschmidt Simon
• [U-Boot] [PATCH] fpga: allow programming fpga from FIT image for all FPGA drivers   Goldschmidt Simon
• [U-Boot] [PATCH] spl: make CONFIG_OF_EMBED pass dts through fdtgrep   Goldschmidt Simon
• [U-Boot] [PATCH] spl: make CONFIG_OF_EMBED pass dts through fdtgrep   Goldschmidt Simon
• [U-Boot] [PATCH] fpga: allow programming fpga from FIT image for all FPGA drivers   Goldschmidt Simon
• [U-Boot] [PATCH] fpga: allow programming fpga from FIT image for all FPGA drivers   Goldschmidt Simon
• [U-Boot] [PATCH] fpga: allow programming fpga from FIT image for all FPGA drivers   Goldschmidt Simon
• [U-Boot] [PATCH] sf: ensure flash device is in 3-byte address mode   Goldschmidt Simon
• [U-Boot] [PATCH v2] drivers: core: Add translation in live tree case   Mario Six
• [U-Boot] [PATCH 2/2] armv8: ls1043a: Discard the needless cpu nodes   Wenbin Song
• [U-Boot] [PATCH 0/2] Disable hybrid mode for SPANSION S25FS-S family   Rajat Srivastava
• [U-Boot] [PATCH 00/10] rockchip: add tpl and OPTEE support for rk3229   Heiko Stuebner
• [U-Boot] [PATCH 00/10] rockchip: add tpl and OPTEE support for rk3229   Heiko Stuebner
• [U-Boot] [PATCH 00/10] rockchip: add tpl and OPTEE support for rk3229   Heiko Stübner
• [U-Boot] [PATCH 2/3] armv8: ls1088ardb: Add CONFIG_DISTRO_DEFAULTS qspi-defconfig   York Sun
• [U-Boot] [PATCH 1/3] arm64: ls1088ardb: Add distro boot support   York Sun
• [U-Boot] [Patch V5 1/2] armv8: ls1088ardb: Add SD boot support for ls1088   York Sun
• [U-Boot] [PATCH v4 2/2] armv8: ls1088: Enable SATA for ls1088   York Sun
• [U-Boot] [PATCH 1/4] arm64: ls1043ardb: Add sd_bootcmd for distro fallback in case of sdboot   York Sun
• [U-Boot] [PATCH v2] armv8: ls1088ardb: Add distro boot support   York Sun
• [U-Boot] [PATCH v2] armv8: ls1088ardb: Add distro boot support   York Sun
• [U-Boot] [PATCH v4 1/2] armv8: lsch3: Add imply SCSI for ls1088   York Sun
• [U-Boot] [PATCH v6 1/2] armv8: ls1088ardb: Add SD boot support for ls1088   York Sun
• [U-Boot] [PATCH v4 1/7] armv8: lsch3: Add serdes and DDR voltage setup   York Sun
• [U-Boot] [PATCH] driver: net: ldpaa_eth: Add PHY-less SGMII support   York Sun
• [U-Boot] [PATCH 3/3] Powerpc: pcie: Make pcie link state judgement more specific   York Sun
• [U-Boot] [PATCH 3/3] Powerpc: pcie: Make pcie link state judgement more specific   York Sun
• [U-Boot] [PATCH] driver: net: ldpaa_eth: Add PHY-less SGMII support   York Sun
• [U-Boot] [PATCH] armv8: fsl-layerscape: Add support of disabling core prefetch   York Sun
• [U-Boot] [PATCH v5 0/7] Add VID support for QDS and RDB platforms   York Sun
• [U-Boot] [PATCH v5 1/7] armv8: lsch3: Add serdes and DDR voltage setup   York Sun
• [U-Boot] [PATCH v6 1/7] armv8: lsch3: Add serdes and DDR voltage setup   York Sun
• [U-Boot] Please pull fsl-qoriq master   York Sun
• [U-Boot] mtd: cfi: Add support for status register polling   York Sun
• [U-Boot] [PATCH] drivers: net: ldpaa_eth: Correct error handler for qbman_swp_acquire()   York Sun
• [U-Boot] [PATCH] armv8: ls1088a: Move CONFIG_SPI_FLASH_SPANSION to defconfig   York Sun
• [U-Boot] [PATCH v2] mtd: nand: fsl-ifc: fix support of multiple NAND devices   York Sun
• [U-Boot] [PATCH v4 2/2] armv8: ls1088: Enable SATA for ls1088   York Sun
• [U-Boot] [PATCH v6 1/2] armv8: ls1088ardb: Add SD boot support for ls1088   York Sun
• [U-Boot] [PATCH v6 2/2] armv8: ls1088aqds: Add SD boot support for ls1088qds   York Sun
• [U-Boot] [PATCH v2] armv8: ls1088ardb: Add distro boot support   York Sun
• [U-Boot] [PATCH 1/4] ls1043ardb: Add sd_bootcmd for distro fallback in case of sdboot   York Sun
• [U-Boot] [PATCH] driver: net: fsl-mc: Use base 16 in simple_strtoul   York Sun
• [U-Boot] [PATCH] cmd: mac: Update description of help   York Sun
• [U-Boot] mtd: cfi: Add support for status register polling   York Sun
• [U-Boot] mtd: cfi: Add support for status register polling   York Sun
• [U-Boot] mtd: cfi: Add support for status register polling   York Sun
• [U-Boot] [PATCH] mtd: cfi: Fix checking status register feature   York Sun
• [U-Boot] mtd: cfi: Add support for status register polling   York Sun
• [U-Boot] [PATCH] SECURE BOOT: Add fall back option   York Sun
• [U-Boot] [PATCH] mtd: cfi: Fix checking status register feature   York Sun
• [U-Boot] [PATCH 1/3] common: Fix-up MAC addr in dts by fetching env variable serially   York Sun
• [U-Boot] [PATCH 0/3] Update MAC address in "ethernet" node of Linux device tree   York Sun
• [U-Boot] [PATCH] FSL PCI: Configure PCIe reference ratio   York Sun
• [U-Boot] [PATCH] FSL PCI: Configure PCIe reference ratio   York Sun
• [U-Boot] [PATCH] FSL PCI: Configure PCIe reference ratio   York Sun
• [U-Boot] [PATCH] FSL PCI: Configure PCIe reference ratio   York Sun
• [U-Boot] [PATCH] FSL PCI: Configure PCIe reference ratio   York Sun
• [U-Boot] [PATCH] FSL PCI: Configure PCIe reference ratio   York Sun
• [U-Boot] [PATCH 1/3] common: Fix-up MAC addr in dts by fetching env variable serially   York Sun
• [U-Boot] [PATCH 0/3] ls1012a: fix tftp failure   York Sun
• [U-Boot] [PATCH] SPL: Add FIT data-position property support   York Sun
• [U-Boot] [PATCH] armv8: mmu: fix page table mapping   York Sun
• [U-Boot] [PATCH 1/3] armv8: fsl-layerscape: SPL size reduction   York Sun
• [U-Boot] [PATCH v1 4/9] fsl: secure boot: Remove dependency of command line for fsl_validate.c   York Sun
• [U-Boot] [PATCH 3/3] Powerpc: pcie: Make pcie link state judgement more specific   York Sun
• [U-Boot] [PATCH 0/3][v3] Update MAC address in "ethernet" node of Linux device tree   York Sun
• [U-Boot] [PATCH] armv8: ls1088ardb: support force SDHC mode by hwconfig   York Sun
• [U-Boot] [v2] armv8: ls1012a: enable/disable eSDHC1 through hwconfig for RDB   York Sun
• [U-Boot] [PATCH 2/2] armv8: ls1043a: Discard the needless cpu nodes   York Sun
• [U-Boot] [Patch v2 1/2] driver: net: ldpaa_eth: Add PHY-less SGMII support   York Sun
• [U-Boot] [v2] armv8: ls1012a: enable/disable eSDHC1 through hwconfig for RDB   York Sun
• [U-Boot] [PATCH] ARM: Samsung: Add Exynos5422-based Odroid HC1 support   Marek Szyprowski
• [U-Boot] [linux-sunxi] Re: [PATCH] sunxi: set the default CPUx frequency of H5 to 816MHz   Jagan Teki
• [U-Boot] [UBOOT PATCH 1/2] spi: zynqmp_qspi: Add support for ZynqMP qspi driver   Jagan Teki
• [U-Boot] [PATCH] sunxi: add support for Banana Pi M2 Zero board   Jagan Teki
• [U-Boot] [linux-sunxi] Re: [PATCH] sunxi: add support for Banana Pi M2 Zero board   Jagan Teki
• [U-Boot] [linux-sunxi] Re: [PATCH] sunxi: add support for Banana Pi M2 Zero board   Jagan Teki
• [U-Boot] [linux-sunxi] Re: [PATCH] sunxi: add support for Banana Pi M2 Zero board   Jagan Teki
• [U-Boot] [PATCH v2 2/2] video: sunxi: de2: add support for LCD SimpleFB   Jagan Teki
• [U-Boot] [PATCH v2 1/2] video: sunxi: de2: fix SimpleFB node creation when HDMI not initialized   Jagan Teki
• [U-Boot] [PATCH] mmc: fsl_esdhc: Fix PIO timeout   Jagan Teki
• [U-Boot] rk3288: Falcon mode broken   Jagan Teki
• [U-Boot] [PATCH 1/3] spl: set SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR to 0x4000 for rockchip   Jagan Teki
• [U-Boot] [PATCH] sunxi: lower the DRAM frequency of Nano Pi NEO2 to 504MHz   Jagan Teki
• [U-Boot] [PATCH] sunxi: lower the DRAM frequency of Nano Pi NEO2 to 504MHz   Jagan Teki
• [U-Boot] [PATCH] sunxi: set the default CPUx frequency of H5 to 816MHz   Jagan Teki
• [U-Boot] [PATCH] mmc-uclass: spl: upriv->mmc override by host descriptor address   Jagan Teki
• [U-Boot] [PATCH 0/9] rockchip: rk3288-vyasa: dts fixes/additions   Jagan Teki
• [U-Boot] [PATCH 1/9] ARM: dts: rockchip: Sync rk3288-vyasa dts from Linux   Jagan Teki
• [U-Boot] [PATCH 2/9] ARM: dts: rockchip: rk3288-vyasa: Remove vdd_log from rk808, DCDC_REG1   Jagan Teki
• [U-Boot] [PATCH 3/9] ARM: dts: rockchip: rk3288-vyasa: Use vmmc-supply from PMIC   Jagan Teki
• [U-Boot] [PATCH 4/9] ARM: dts: rockchip: Add regulators for rk3288-vyasa   Jagan Teki
• [U-Boot] [PATCH 5/9] ARM: dts: rockchip: Add gmac support for rk3288-vyasa board   Jagan Teki
• [U-Boot] [PATCH 6/9] rockchip: rk3288-vyasa: defconfig: Enable gmac support   Jagan Teki
• [U-Boot] [PATCH 7/9] ARM: dts: rockchip: Add usb host for rk3288-vyasa   Jagan Teki
• [U-Boot] [PATCH 8/9] ARM: dts: rockchip: Add usb otg for rk3288-vyasa   Jagan Teki
• [U-Boot] [PATCH 9/9] rockchip: rk3288-vyasa: defconfig: Enable USB host and otg   Jagan Teki
• [U-Boot] [PATCH 1/2] rk3288: tinker: Add TPL support   Jagan Teki
• [U-Boot] [PATCH 2/2] rk3288: tinker: Add falcon mode support   Jagan Teki
• [U-Boot] [PATCH] sunxi: set the default CPUx frequency of H5 to 816MHz   Jagan Teki
• [U-Boot] [PATCH v2 1/2] video: sunxi: de2: fix SimpleFB node creation when HDMI not initialized   Jagan Teki
• [U-Boot] [PATCH 1/3] spl: set SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR to 0x4000 for rockchip   Jagan Teki
• [U-Boot] sunxi: SATA link timeout fix   Jagan Teki
• [U-Boot] [PATCH] sunxi: a64: Add verified-boot support   Jagan Teki
• [U-Boot] [U-Boot, 7/9] ARM: dts: rockchip: Add usb host for rk3288-vyasa   Jagan Teki
• [U-Boot] [PATCH] sunxi: a64: Add verified-boot support   Jagan Teki
• [U-Boot] sunxi: SATA link timeout fix   Jagan Teki
• [U-Boot] [PATCH 1/2] sunxi: fix CONFIG_SUNXI_EMAC references   Jagan Teki
• [U-Boot] [PATCH 2/2] sunxi: restore PHYLIB for CONFIG_SUN4I_EMAC users   Jagan Teki
• [U-Boot] SUNXI: A64: Increase SPL size   Jagan Teki
• [U-Boot] [PATCH 1/2] sunxi: fix CONFIG_SUNXI_EMAC references   Jagan Teki
• [U-Boot] [PATCH 2/2] sunxi: restore PHYLIB for CONFIG_SUN4I_EMAC users   Jagan Teki
• [U-Boot] sunxi: SATA link timeout fix   Jagan Teki
• [U-Boot] SUNXI: A64: Increase SPL size   Jagan Teki
• [U-Boot] sunxi: SATA link timeout fix   Jagan Teki
• [U-Boot] Pull request: u-boot-sunxi/master   Jagan Teki
• [U-Boot] SUNXI: A64: Increase SPL size   Jagan Teki
• [U-Boot] sunxi: SATA link timeout fix   Jagan Teki
• [U-Boot] SUNXI: A64: Increase SPL size   Jagan Teki
• [U-Boot] SUNXI: A64: Increase SPL size   Jagan Teki
• [U-Boot] [PATCH 7/9] net: sun8i_emac: Fix build for non-H3/H5 SoCs   Jagan Teki
• [U-Boot] [PATCH] spi: kirkwood: avoid divide by zero crash   Jagan Teki
• [U-Boot] [PATCH 7/9] net: sun8i_emac: Fix build for non-H3/H5 SoCs   Jagan Teki
• [U-Boot] [PATCH] sf: ensure flash device is in 3-byte address mode   Jagan Teki
• [U-Boot] [U-Boot, 2/3] rockchip: doc: update U-Boot location info   Jagan Teki
• [U-Boot] [U-Boot, 2/3] rockchip: doc: update U-Boot location info   Jagan Teki
• [U-Boot] [U-Boot, 2/3] rockchip: doc: update U-Boot location info   Jagan Teki
• [U-Boot] [PATCH 1/2] rockchip: doc: Fix U-Boot proper location for falcon   Jagan Teki
• [U-Boot] [PATCH 2/2] rockchip: configs: vyasa: Update falcon offsets   Jagan Teki
• [U-Boot] [PATCH] rockchip: doc: update U-Boot location info   Jagan Teki
• [U-Boot] [PATCH 1/2] arm: mvebu: clearfog: Fix SPI-NOR flash access   Jagan Teki
• [U-Boot] [PATCH 2/2] arm: mvebu: clearfog: update SPI flash DT description   Jagan Teki
• [U-Boot] sunxi: SATA link timeout fix   Jagan Teki
• [U-Boot] Pull request: u-boot-sunxi/master   Jagan Teki
• [U-Boot] [PATCH v2 1/3] sunxi: a64: Enable FIT Signature   Jagan Teki
• [U-Boot] [PATCH v2 2/3] sunxi: arm64: Increase CONFIG_SYS_BOOTM_LEN to 32MB   Jagan Teki
• [U-Boot] [PATCH v2 3/3] sunxi: README.sunxi64: Document verified-boot for a64   Jagan Teki
• [U-Boot] [PATCH v3 0/9] i.MX6: engicam: Add SPL_OF_CONTROL support   Jagan Teki
• [U-Boot] [PATCH v3 1/9] i.MX6: engicam: Move set_fdt_file to common   Jagan Teki
• [U-Boot] [PATCH v3 2/9] i.MX6Q: icorem6: Move spl load fit to common/spl   Jagan Teki
• [U-Boot] [PATCH v3 3/9] i.MX6Q: icore: Add SPL_OF_CONTROL support   Jagan Teki
• [U-Boot] [PATCH v3 4/9] pinctrl: imx6ul: Fix pinctrl data overlapped with DT area   Jagan Teki
• [U-Boot] [PATCH v3 5/9] i.MX6UL: icore: Add SPL_OF_CONTROL support   Jagan Teki
• [U-Boot] [PATCH v3 6/9] board: icore-rqs: Fix mmc get env device   Jagan Teki
• [U-Boot] [PATCH v3 7/9] i.MX6: engicam: Add imx6q/imx6ul boards for existing boards   Jagan Teki
• [U-Boot] [PATCH v3 8/9] engicam: imx6q: Return mmc dev 0 for icore   Jagan Teki
• [U-Boot] [PATCH v3 9/9] configs: icore-rqs: Enable falcon mode   Jagan Teki
• [U-Boot] [PATCH v5 1/2] sun50i: h5: Add NanoPi Neo Plus2 DT initial support   Jagan Teki
• [U-Boot] [PATCH v6 2/2] sun50i: h5: Add NanoPi Neo Plus2 DT initial support   Jagan Teki
• [U-Boot] [PATCH v6 1/2] arm64: sun50i-h5.dtsi : update to kernel 4.14   Jagan Teki
• [U-Boot] [PATCH v1] mtd/spi: add support for is25lq040b   Jagan Teki
• [U-Boot] sun50i blocking SPL changes   Jagan Teki
• [U-Boot] sun50i blocking SPL changes   Jagan Teki
• [U-Boot] [PATCH 1/2] arm64: dts: sun50i: a64: Add USB host node for bananapi-m64   Jagan Teki
• [U-Boot] [PATCH 2/2] arm64: dts: sun50i: h5: Order nodes in alphabetic for orangepi-prime   Jagan Teki
• [U-Boot] [PATCH] arm64: dts: allwinner: a64: Add uart2-pins   Jagan Teki
• [U-Boot] [PATCH] spi: Zap unneeded option   Jagan Teki
• [U-Boot] [PATCH] arm64: dts: allwinner: a64: Add uart2-pins   Jagan Teki
• [U-Boot] [PATCH RFC] arm64: allwinner: a64: Add Brava Keller initial support   Jagan Teki
• [U-Boot] [PATCH v3 1/3] mx25: Move MX25 selection to Kconfig   Benoît Thébaudeau
• [U-Boot] [RFC] mmc: fsl_esdhc: Do not set high speed mode on MX25 and MX51   Benoît Thébaudeau
• [U-Boot] [PATCH v3 1/3] mx25: Move MX25 selection to Kconfig   Benoît Thébaudeau
• [U-Boot] [PATCH 3/3] Powerpc: pcie: Make pcie link state judgement more specific   Joakim Tjernlund
• [U-Boot] [PATCH] FSL PCI: Configure PCIe reference ratio   Joakim Tjernlund
• [U-Boot] [PATCH] FSL PCI: Configure PCIe reference ratio   Joakim Tjernlund
• [U-Boot] [PATCH] FSL PCI: Configure PCIe reference ratio   Joakim Tjernlund
• [U-Boot] [PATCH] FSL PCI: Configure PCIe reference ratio   Joakim Tjernlund
• [U-Boot] [PATCH] FSL PCI: Configure PCIe reference ratio   Joakim Tjernlund
• [U-Boot] [PATCH] FSL PCI: Configure PCIe reference ratio   Joakim Tjernlund
• [U-Boot] U-Boot proper(not SPL) relocate option   Joakim Tjernlund
• [U-Boot] [PULL] Please pull u-boot-rockchip   Dr. Philipp Tomsich
• [U-Boot] [PATCH] armv8: update gd after relocate   Dr. Philipp Tomsich
• [U-Boot] [PATCH 2/3] rockchip: doc: update U-Boot location info   Dr. Philipp Tomsich
• [U-Boot] [PATCH 1/2] rockchip: config: sync the ENV offset from rockchip legacy U-Boot   Dr. Philipp Tomsich
• [U-Boot] [PATCH v5 07/18] socfpga: boot0 hook: adjust to unified boot0 semantics   Dr. Philipp Tomsich
• [U-Boot] [PATCH v5 07/18] socfpga: boot0 hook: adjust to unified boot0 semantics   Dr. Philipp Tomsich
• [U-Boot] [PULL] Please pull u-boot-rockchip   Dr. Philipp Tomsich
• [U-Boot] [PATCH 07/15] spl: atf: introduce spl_invoke_atf and make bl31_entry private   Dr. Philipp Tomsich
• [U-Boot] [PATCH 10/15] rockchip: dts: rk3399-puma: add /config/arm-trusted-firmware, reset-gpio property   Dr. Philipp Tomsich
• [U-Boot] [PATCH v5 02/18] rockchip: boot0: align to 0x20 for armv7 '_start'   Dr. Philipp Tomsich
• [U-Boot] [U-Boot, 2/3] rockchip: doc: update U-Boot location info   Dr. Philipp Tomsich
• [U-Boot] [U-Boot, 2/3] rockchip: doc: update U-Boot location info   Dr. Philipp Tomsich
• [U-Boot] [U-Boot, 2/3] rockchip: doc: update U-Boot location info   Dr. Philipp Tomsich
• [U-Boot] [U-Boot, 2/3] rockchip: doc: update U-Boot location info   Dr. Philipp Tomsich
• [U-Boot] [PULL] Please pull u-boot-rockchip   Dr. Philipp Tomsich
• [U-Boot] [PATCH 1/2] usb: xhci: implement FEAT_POWER hook for switching regulators for ports   Dr. Philipp Tomsich
• [U-Boot] [PATCH v3 0/3] Most rockchip platform based boards use a key to instruct   Dr. Philipp Tomsich
• [U-Boot] [PATCH 1/2] usb: xhci: implement FEAT_POWER hook for switching regulators for ports   Dr. Philipp Tomsich
• [U-Boot] [U-Boot,V9,1/4] usb: rockchip: add the rockusb gadget   Dr. Philipp Tomsich
• [U-Boot] [U-Boot, v3, 1/3] rockchip: make boot_mode related codes reused across all platforms   Dr. Philipp Tomsich
• [U-Boot] [U-Boot, v3, 3/3] rockchip: check download key before bootup   Dr. Philipp Tomsich
• [U-Boot] [PULL] Please pull from u-boot-rockchip/master   Dr. Philipp Tomsich
• [U-Boot] [PATCH v2 1/3] usb: hub: identify the hub-device to usb_hub_reset_devices   Dr. Philipp Tomsich
• [U-Boot] [PATCH v3 1/3] usb: hub: identify the hub-device to usb_hub_reset_devices   Dr. Philipp Tomsich
• [U-Boot] [U-Boot, 10/15] rockchip: dts: rk3399-puma: add /config/arm-trusted-firmware, reset-gpio property   Dr. Philipp Tomsich
• [U-Boot] sun50i blocking SPL changes   Dr. Philipp Tomsich
• [U-Boot] sun50i blocking SPL changes   Dr. Philipp Tomsich
• [U-Boot] U-Boot proper(not SPL) relocate option   Dr. Philipp Tomsich
• [U-Boot] sun50i blocking SPL changes   Dr. Philipp Tomsich
• [U-Boot] sun50i blocking SPL changes   Dr. Philipp Tomsich
• [U-Boot] U-Boot proper(not SPL) relocate option   Dr. Philipp Tomsich
• [U-Boot] U-Boot proper(not SPL) relocate option   Dr. Philipp Tomsich
• [U-Boot] [PATCH v2 1/2] power: regulator: add driver for the FAN53555 family   Dr. Philipp Tomsich
• [U-Boot] [PULL] Please pull u-boot-rockchip/master   Dr. Philipp Tomsich
• [U-Boot] [U-Boot, RESEND, 2/2] rockchip: clk: add device_bind_driver_to_node for reset driver   Dr. Philipp Tomsich
• [U-Boot] [PATCH 1/2] rockchip: rk3399-puma: add code to allow forcing a power-on reset   Dr. Philipp Tomsich
• [U-Boot] [PATCH v2 1/2] power: regulator: add driver for the FAN53555 family   Dr. Philipp Tomsich
• [U-Boot] [U-Boot, v2, 1/2] drivers/reset: support rockchip reset drivers   Dr. Philipp Tomsich
• [U-Boot] [U-Boot, 1/3] rockchip: boot mode: parse adc channel from dts   Dr. Philipp Tomsich
• [U-Boot] [U-Boot, 1/3] rockchip: boot mode: parse adc channel from dts   Dr. Philipp Tomsich
• [U-Boot] [U-Boot, 1/3] rockchip: boot mode: parse adc channel from dts   Dr. Philipp Tomsich
• [U-Boot] rockchip: rock: remove CONFIG_ENV_OFFSEt   Philipp Tomsich
• [U-Boot] [U-Boot, 1/2] rockchip: config: sync the ENV offset from rockchip legacy U-Boot   Philipp Tomsich
• [U-Boot] [U-Boot, 2/2] rockchip: config: use common CONFIG_ENV_SIZE for all SoCs   Philipp Tomsich
• [U-Boot] [U-Boot, v3, 1/2] rockchip: sysreset: merge into one common driver   Philipp Tomsich
• [U-Boot] [U-Boot, v3, 2/2] rockchip: clock: update sysreset driver bingding   Philipp Tomsich
• [U-Boot] [U-Boot, 1/3] spl: set SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR to 0x4000 for rockchip   Philipp Tomsich
• [U-Boot] [U-Boot, 2/3] rockchip: doc: update U-Boot location info   Philipp Tomsich
• [U-Boot] [U-Boot, 3/3] rockchip: remove SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR from defconfig   Philipp Tomsich
• [U-Boot] rockchip: rock: remove CONFIG_ENV_OFFSEt   Philipp Tomsich
• [U-Boot] [U-Boot, 1/2] rockchip: config: sync the ENV offset from rockchip legacy U-Boot   Philipp Tomsich
• [U-Boot] [U-Boot, 2/2] rockchip: config: use common CONFIG_ENV_SIZE for all SoCs   Philipp Tomsich
• [U-Boot] rockchip: rock: remove CONFIG_ENV_OFFSEt   Philipp Tomsich
• [U-Boot] [U-Boot, 1/2] rockchip: config: sync the ENV offset from rockchip legacy U-Boot   Philipp Tomsich
• [U-Boot] [U-Boot, 2/2] rockchip: config: use common CONFIG_ENV_SIZE for all SoCs   Philipp Tomsich
• [U-Boot] [PATCH 1/6] rockchip: dts: rk3399-puma: fix the modelling of BIOS_DISABLE   Philipp Tomsich
• [U-Boot] [PATCH 2/6] rockchip: dts: rk3399-puma: update usbhub_enable regulator   Philipp Tomsich
• [U-Boot] [PATCH 3/6] rockchip: dts: rk3399-puma: update USB configuration   Philipp Tomsich
• [U-Boot] [PATCH 4/6] rockchip: dts: Use defines for pin names in rk3399-puma.dtsi and rk3368-lion.dts   Philipp Tomsich
• [U-Boot] [PATCH 5/6] rockchip: dts: rk3399: change sd-card io voltage to 3.0V   Philipp Tomsich
• [U-Boot] [PATCH 6/6] rockchip: board: puma_rk3399: make env location selectable via Kconfig   Philipp Tomsich
• [U-Boot] [PATCH 1/2] usb: xhci: implement FEAT_POWER hook for switching regulators for ports   Philipp Tomsich
• [U-Boot] [PATCH 2/2] rockchip: dts: rk3399-puma: add a 'xhci, port-power' stringlist for USB1   Philipp Tomsich
• [U-Boot] [U-Boot, 1/6] rockchip: dts: rk3399-puma: fix the modelling of BIOS_DISABLE   Philipp Tomsich
• [U-Boot] [U-Boot, 2/6] rockchip: dts: rk3399-puma: update usbhub_enable regulator   Philipp Tomsich
• [U-Boot] [U-Boot, 3/6] rockchip: dts: rk3399-puma: update USB configuration   Philipp Tomsich
• [U-Boot] [U-Boot, 4/6] rockchip: dts: Use defines for pin names in rk3399-puma.dtsi and rk3368-lion.dts   Philipp Tomsich
• [U-Boot] [U-Boot, 5/6] rockchip: dts: rk3399: change sd-card io voltage to 3.0V   Philipp Tomsich
• [U-Boot] [U-Boot, 6/6] rockchip: board: puma_rk3399: make env location selectable via Kconfig   Philipp Tomsich
• [U-Boot] [U-Boot, 1/3] spl: set SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR to 0x4000 for rockchip   Philipp Tomsich
• [U-Boot] [U-Boot, 2/3] rockchip: doc: update U-Boot location info   Philipp Tomsich
• [U-Boot] [U-Boot, 3/3] rockchip: remove SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR from defconfig   Philipp Tomsich
• [U-Boot] [U-Boot, 1/3] spl: set SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR to 0x4000 for rockchip   Philipp Tomsich
• [U-Boot] [U-Boot, 2/3] rockchip: doc: update U-Boot location info   Philipp Tomsich
• [U-Boot] [U-Boot, 3/3] rockchip: remove SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR from defconfig   Philipp Tomsich
• [U-Boot] [U-Boot, RESEND, 2/2] rockchip: clk: add device_bind_driver_to_node for reset driver   Philipp Tomsich
• [U-Boot] [U-Boot, RESEND, 1/2] drivers/reset: support rockchip reset drivers   Philipp Tomsich
• [U-Boot] [U-Boot, v3, 2/2] rockchip: clock: update sysreset driver bingding   Philipp Tomsich
• [U-Boot] [U-Boot, v3, 1/2] rockchip: sysreset: merge into one common driver   Philipp Tomsich
• [U-Boot] [U-Boot, v5, 01/18] arm: boot0 hook: move boot0 hook before '_start'   Philipp Tomsich
• [U-Boot] [U-Boot, v5, 02/18] rockchip: boot0: align to 0x20 for armv7 '_start'   Philipp Tomsich
• [U-Boot] [U-Boot, v5, 03/18] rockchip: enable boot0-hook for all Rockchip SoCs   Philipp Tomsich
• [U-Boot] [U-Boot, v5, 04/18] rockchip: mkimage: use spl_boot0 for all Rockchip SoCs   Philipp Tomsich
• [U-Boot] [U-Boot, v5, 05/18] rockchip: rk3288: use aligned address for SPL_TEXT_BASE   Philipp Tomsich
• [U-Boot] [U-Boot, v5, 06/18] rockchip: rk3036: use aligned address for SPL_TEXT_BASE   Philipp Tomsich
• [U-Boot] [U-Boot, v5, 07/18] socfpga: boot0 hook: adjust to unified boot0 semantics   Philipp Tomsich
• [U-Boot] [U-Boot, v5, 08/18] bcm235xx: boot0 hook: adjust to unified boot0 semantics   Philipp Tomsich
• [U-Boot] [U-Boot, v5, 09/18] bcm281xx: boot0 hook: adjust to unified boot0 semantics   Philipp Tomsich
• [U-Boot] [U-Boot, v5, 10/18] rockchip: boot0 hook: support early return for RK3188/RK3066-style BROM   Philipp Tomsich
• [U-Boot] [U-Boot, v5, 11/18] arm: make save_boot_params_ret prototype visible for AArch64   Philipp Tomsich
• [U-Boot] [U-Boot, v5, 12/18] arm: mark save_boot_params_ret as a function   Philipp Tomsich
• [U-Boot] [U-Boot, v5, 13/18] arm: provide a PCS-compliant setjmp implementation   Philipp Tomsich
• [U-Boot] [U-Boot, v5, 14/18] rockchip: back-to-bootrom: replace assembly-implementation with C-code   Philipp Tomsich
• [U-Boot] [U-Boot, v5, 15/18] rockchip: rk3188: use boot0 hook to load up SPL in 2 steps   Philipp Tomsich
• [U-Boot] [U-Boot, v5, 16/18] rockchip: back-to-bootrom: allow passing a cmd to the bootrom   Philipp Tomsich
• [U-Boot] [U-Boot, v5, 17/18] rockchip: rk3188: move CONFIG_SPL_* entries from rk3188_common.h to Kconfig   Philipp Tomsich
• [U-Boot] [U-Boot, v5, 18/18] rockchip: mkimage: remove unused code-paths (spl_boot0 is now implied)   Philipp Tomsich
• [U-Boot] [U-Boot, v3, 1/2] rockchip: sysreset: merge into one common driver   Philipp Tomsich
• [U-Boot] [U-Boot, v3, 2/2] rockchip: clock: update sysreset driver bingding   Philipp Tomsich
• [U-Boot] [U-Boot, v3, 1/2] rockchip: sysreset: merge into one common driver   Philipp Tomsich
• [U-Boot] [U-Boot, v3, 2/2] rockchip: clock: update sysreset driver bingding   Philipp Tomsich
• [U-Boot] [U-Boot, 1/8] rockchip: rk3328: add tpl board file support   Philipp Tomsich
• [U-Boot] [U-Boot, 2/8] rockchip: rk3328: add spl board file support   Philipp Tomsich
• [U-Boot] [U-Boot, 3/8] rockchip: rk3328: add a link file for tpl   Philipp Tomsich
• [U-Boot] [U-Boot, 4/8] rockchip: rk3328-evb: add script for atf fit   Philipp Tomsich
• [U-Boot] [U-Boot, 5/8] rockchip: dts: rk3328: enable the drivers need by tpl/spl   Philipp Tomsich
• [U-Boot] [U-Boot, 6/8] rockchip: Kconfig: enable TPL/SPL support for rk3328   Philipp Tomsich
• [U-Boot] [U-Boot, 7/8] rockchip: evb-rk3328: enable defconfig options for TPL/SPL   Philipp Tomsich
• [U-Boot] [U-Boot, 8/8] rockchip: rk3328: add config option for TPL/SPL   Philipp Tomsich
• [U-Boot] [U-Boot, 6/8] rockchip: Kconfig: enable TPL/SPL support for rk3328   Philipp Tomsich
• [U-Boot] [U-Boot, 7/8] rockchip: evb-rk3328: enable defconfig options for TPL/SPL   Philipp Tomsich
• [U-Boot] [U-Boot, 8/8] rockchip: rk3328: add config option for TPL/SPL   Philipp Tomsich
• [U-Boot] [U-Boot, 1/8] rockchip: rk3328: add tpl board file support   Philipp Tomsich
• [U-Boot] [U-Boot, 2/8] rockchip: rk3328: add spl board file support   Philipp Tomsich
• [U-Boot] [U-Boot, 3/8] rockchip: rk3328: add a link file for tpl   Philipp Tomsich
• [U-Boot] [U-Boot, 4/8] rockchip: rk3328-evb: add script for atf fit   Philipp Tomsich
• [U-Boot] [U-Boot, 5/8] rockchip: dts: rk3328: enable the drivers need by tpl/spl   Philipp Tomsich
• [U-Boot] [U-Boot, 1/9] ARM: dts: rockchip: Sync rk3288-vyasa dts from Linux   Philipp Tomsich
• [U-Boot] [U-Boot, 2/9] ARM: dts: rockchip: rk3288-vyasa: Remove vdd_log from rk808, DCDC_REG1   Philipp Tomsich
• [U-Boot] [U-Boot, 3/9] ARM: dts: rockchip: rk3288-vyasa: Use vmmc-supply from PMIC   Philipp Tomsich
• [U-Boot] [U-Boot, 4/9] ARM: dts: rockchip: Add regulators for rk3288-vyasa   Philipp Tomsich
• [U-Boot] [U-Boot, 5/9] ARM: dts: rockchip: Add gmac support for rk3288-vyasa board   Philipp Tomsich
• [U-Boot] [U-Boot, 6/9] rockchip: rk3288-vyasa: defconfig: Enable gmac support   Philipp Tomsich
• [U-Boot] [U-Boot, 7/9] ARM: dts: rockchip: Add usb host for rk3288-vyasa   Philipp Tomsich
• [U-Boot] [U-Boot, 8/9] ARM: dts: rockchip: Add usb otg for rk3288-vyasa   Philipp Tomsich
• [U-Boot] [U-Boot, 9/9] rockchip: rk3288-vyasa: defconfig: Enable USB host and otg   Philipp Tomsich
• [U-Boot] [U-Boot, 2/9] ARM: dts: rockchip: rk3288-vyasa: Remove vdd_log from rk808, DCDC_REG1   Philipp Tomsich
• [U-Boot] [U-Boot, 1/9] ARM: dts: rockchip: Sync rk3288-vyasa dts from Linux   Philipp Tomsich
• [U-Boot] [U-Boot, 3/9] ARM: dts: rockchip: rk3288-vyasa: Use vmmc-supply from PMIC   Philipp Tomsich
• [U-Boot] [U-Boot, 4/9] ARM: dts: rockchip: Add regulators for rk3288-vyasa   Philipp Tomsich
• [U-Boot] [U-Boot, 6/9] rockchip: rk3288-vyasa: defconfig: Enable gmac support   Philipp Tomsich
• [U-Boot] [U-Boot, 8/9] ARM: dts: rockchip: Add usb otg for rk3288-vyasa   Philipp Tomsich
• [U-Boot] [U-Boot, 9/9] rockchip: rk3288-vyasa: defconfig: Enable USB host and otg   Philipp Tomsich
• [U-Boot] [U-Boot, 5/9] ARM: dts: rockchip: Add gmac support for rk3288-vyasa board   Philipp Tomsich
• [U-Boot] [U-Boot, 7/9] ARM: dts: rockchip: Add usb host for rk3288-vyasa   Philipp Tomsich
• [U-Boot] [U-Boot, 7/9] ARM: dts: rockchip: Add usb host for rk3288-vyasa   Philipp Tomsich
• [U-Boot] rockchip: doc: update U-Boot location info   Philipp Tomsich
• [U-Boot] rockchip: doc: update U-Boot location info   Philipp Tomsich
• [U-Boot] [U-Boot, 1/2] rockchip: doc: Fix U-Boot proper location for falcon   Philipp Tomsich
• [U-Boot] [U-Boot, 2/2] rockchip: configs: vyasa: Update falcon offsets   Philipp Tomsich
• [U-Boot] [U-Boot, 1/2] rockchip: doc: Fix U-Boot proper location for falcon   Philipp Tomsich
• [U-Boot] [U-Boot, 2/2] rockchip: configs: vyasa: Update falcon offsets   Philipp Tomsich
• [U-Boot] rockchip: doc: update U-Boot location info   Philipp Tomsich
• [U-Boot] [U-Boot, 1/2] rockchip: doc: Fix U-Boot proper location for falcon   Philipp Tomsich
• [U-Boot] [U-Boot, 2/2] rockchip: configs: vyasa: Update falcon offsets   Philipp Tomsich
• [U-Boot] rockchip: update boot0 hook   Philipp Tomsich
• [U-Boot] [U-Boot, v3, 2/3] rockchip: add support for enter to bootrom download mode   Philipp Tomsich
• [U-Boot] [U-Boot, v3, 1/3] rockchip: make boot_mode related codes reused across all platforms   Philipp Tomsich
• [U-Boot] [U-Boot, v3, 3/3] rockchip: check download key before bootup   Philipp Tomsich
• [U-Boot] [U-Boot,2/2] rk3288: tinker: Add falcon mode support   Philipp Tomsich
• [U-Boot] [U-Boot,1/2] rk3288: tinker: Add TPL support   Philipp Tomsich
• [U-Boot] [U-Boot, 1/1] rockchip: spi: the symbol for Hertz is Hz   Philipp Tomsich
• [U-Boot] [U-Boot, 1/1] rockchip: spi: the symbol for Hertz is Hz   Philipp Tomsich
• [U-Boot] [U-Boot, v3, 2/3] rockchip: add support for enter to bootrom download mode   Philipp Tomsich
• [U-Boot] [U-Boot,1/2] rk3288: tinker: Add TPL support   Philipp Tomsich
• [U-Boot] [U-Boot, 1/1] rockchip: spi: the symbol for Hertz is Hz   Philipp Tomsich
• [U-Boot] [U-Boot,2/2] rk3288: tinker: Add falcon mode support   Philipp Tomsich
• [U-Boot] rockchip: update boot0 hook   Philipp Tomsich
• [U-Boot] [U-Boot, v3, 1/3] rockchip: make boot_mode related codes reused across all platforms   Philipp Tomsich
• [U-Boot] [U-Boot, v3, 3/3] rockchip: check download key before bootup   Philipp Tomsich
• [U-Boot] rockchip: config: update part table   Philipp Tomsich
• [U-Boot] [U-Boot, 1/1] rockchip: spi: the symbol for Hertz is Hz   Philipp Tomsich
• [U-Boot] [U-Boot,2/2] rk3288: tinker: Add falcon mode support   Philipp Tomsich
• [U-Boot] [U-Boot,1/2] rk3288: tinker: Add TPL support   Philipp Tomsich
• [U-Boot] [U-Boot, v2, 04/18] rockchip: grf_rv1108.h: Fix the grf offsets   Philipp Tomsich
• [U-Boot] [U-Boot, v2, 05/18] rockchip: pinctrl: rv1108: Move the iomux definitions into pinctrl-driver   Philipp Tomsich
• [U-Boot] [U-Boot, v2, 06/18] net: gmac_rockchip: Add support for the RV1108 GMAC   Philipp Tomsich
• [U-Boot] [U-Boot, v2, 07/18] rockchip: pinctrl: rk3328: Move the iomux definitions into pinctrl-driver   Philipp Tomsich
• [U-Boot] [U-Boot, v2, 08/18] rockchip: pinctrl: Add rk3328 gmac pinctrl support   Philipp Tomsich
• [U-Boot] [U-Boot, v2, 09/18] clk: rockchip: Add rk3328 gamc clock support   Philipp Tomsich
• [U-Boot] [U-Boot, v2, 10/18] net: gmac_rockchip: Add rk3328 gmac support   Philipp Tomsich
• [U-Boot] [U-Boot, v2, 11/18] rockchip: configs: Enable GMAC configs for evb-rk3328   Philipp Tomsich
• [U-Boot] [U-Boot, v2, 12/18] rockchip: dts: rk3328: Add gmac2io support   Philipp Tomsich
• [U-Boot] [U-Boot, v2, 13/18] rockchip: dts: rk3328-evb: Enable gmac2io for rk3328-evb   Philipp Tomsich
• [U-Boot] [U-Boot, v2, 14/18] rockchip: pinctrl: rk322x: Move the iomux definitions into pinctrl-driver   Philipp Tomsich
• [U-Boot] [U-Boot, v2, 15/18] rockchip: pinctrl: Add rk322x gmac pinctrl support   Philipp Tomsich
• [U-Boot] [U-Boot, v2, 16/18] clk: rockchip: Add rk322x gamc clock support   Philipp Tomsich
• [U-Boot] [U-Boot, v2, 17/18] net: gmac_rockchip: Add support for the RK3228 GMAC   Philipp Tomsich
• [U-Boot] [U-Boot, v2, 18/18] config: evb-rk3229: Enable rk gmac configs   Philipp Tomsich
• [U-Boot] [PATCH] env: suppress a spurious warning with GCC 7.1   Philipp Tomsich
• [U-Boot] [U-Boot, v3, 1/3] rockchip: make boot_mode related codes reused across all platforms   Philipp Tomsich
• [U-Boot] [U-Boot, v3, 2/3] rockchip: add support for enter to bootrom download mode   Philipp Tomsich
• [U-Boot] [U-Boot, v3, 3/3] rockchip: check download key before bootup   Philipp Tomsich
• [U-Boot] [U-Boot, RESEND, 1/2] drivers/reset: support rockchip reset drivers   Philipp Tomsich
• [U-Boot] [U-Boot, RESEND, 2/2] rockchip: clk: add device_bind_driver_to_node for reset driver   Philipp Tomsich
• [U-Boot] [PATCH v2 1/3] usb: hub: identify the hub-device to usb_hub_reset_devices   Philipp Tomsich
• [U-Boot] [PATCH v2 2/3] rockchip: rk3399-puma: implement usb_hub_reset_devices for puma-rk3399   Philipp Tomsich
• [U-Boot] [PATCH v2 3/3] rockchip: dts: rk3399-puma: add a 'tsd, usb-port-power' stringlist for USB1   Philipp Tomsich
• [U-Boot] [PATCH v3 1/3] usb: hub: identify the hub-device to usb_hub_reset_devices   Philipp Tomsich
• [U-Boot] [PATCH v3 2/3] rockchip: rk3399-puma: implement usb_hub_reset_devices for puma-rk3399   Philipp Tomsich
• [U-Boot] [PATCH v3 3/3] rockchip: dts: rk3399-puma: add a 'tsd, usb-port-power' stringlist for USB1   Philipp Tomsich
• [U-Boot] [PATCH] rockchip: clk: rk3399: change extract_bits to bitfield_extract   Philipp Tomsich
• [U-Boot] [PATCH] rockchip: pinctrl: rk3399: add support for I2C8   Philipp Tomsich
• [U-Boot] [PATCH 1/2] power: regulator: add driver for the FAN53555 family   Philipp Tomsich
• [U-Boot] [PATCH 2/2] rockchip: defconfig: puma-rk3399: enable FAN53555 regulator driver   Philipp Tomsich
• [U-Boot] [PATCH v2 1/2] power: regulator: add driver for the FAN53555 family   Philipp Tomsich
• [U-Boot] [PATCH v2 2/2] rockchip: defconfig: puma-rk3399: enable FAN53555 regulator driver   Philipp Tomsich
• [U-Boot] [U-Boot,4/8] rockchip: rk3128: add pinctrl driver   Philipp Tomsich
• [U-Boot] [U-Boot, 7/8] rockchip: rk3128: add defconfig for evb-rk3128   Philipp Tomsich
• [U-Boot] [U-Boot,3/8] rockchip: rk3128: add clock driver   Philipp Tomsich
• [U-Boot] [U-Boot,5/8] rockchip: rk3128: add sysreset driver   Philipp Tomsich
• [U-Boot] [U-Boot,6/8] rockchip: rk3128: add evb-rk3128 support   Philipp Tomsich
• [U-Boot] [U-Boot, 01/15] image: add IH_OS_ARM_TRUSTED_FIRMWARE for ARM Trusted Firmware   Philipp Tomsich
• [U-Boot] [U-Boot, 02/15] spl: add a fdt_addr field to spl_image_info   Philipp Tomsich
• [U-Boot] [U-Boot, 03/15] spl: change load_addr and entry_point to uintptr_t   Philipp Tomsich
• [U-Boot] [U-Boot, 04/15] spl: fit: simplify logic for FDT loading for non-OS boots   Philipp Tomsich
• [U-Boot] [U-Boot, 05/15] spl: fit: implement fdt_record_loadable   Philipp Tomsich
• [U-Boot] [U-Boot, 06/15] spl: fit: implement recording of loadables into /fit-images   Philipp Tomsich
• [U-Boot] [U-Boot, 07/15] spl: atf: introduce spl_invoke_atf and make bl31_entry private   Philipp Tomsich
• [U-Boot] [U-Boot, 08/15] spl: rename config item SPL_ATF_SUPPORT to SPL_ATF   Philipp Tomsich
• [U-Boot] [U-Boot, 09/15] spl: atf: drop the SPL_ATF_TEXT_BASE configuration item   Philipp Tomsich
• [U-Boot] [U-Boot, 10/15] rockchip: dts: rk3399-puma: add /config/arm-trusted-firmware, reset-gpio property   Philipp Tomsich
• [U-Boot] [U-Boot, 11/15] rockchip: defconfig: firefly-rk3399: sync up with SPL changes for ATF   Philipp Tomsich
• [U-Boot] [U-Boot, 12/15] rockchip: board: puma-rk3399: update .its file to use new features   Philipp Tomsich
• [U-Boot] [U-Boot, 13/15] rockchip: board: lion-rk3368: update .its file   Philipp Tomsich
• [U-Boot] [U-Boot, 14/15] rockchip: defconfig: puma-rk3399: sync up with SPL changes for ATF   Philipp Tomsich
• [U-Boot] [U-Boot, 15/15] rockchip: defconfig: lion-rk3368: sync up with SPL changes for ATF   Philipp Tomsich
• [U-Boot] [PATCH 1/2] rockchip: fix turning off boot-mode via Kconfig   Philipp Tomsich
• [U-Boot] [PATCH 2/2] rockchip: defconfig: puma-rk3399: bypass ADC-based boot_mode check   Philipp Tomsich
• [U-Boot] [PATCH] dm: reset: have the reset-command perform a COLD reset   Philipp Tomsich
• [U-Boot] rockchip: clk: rk3399: change extract_bits to bitfield_extract   Philipp Tomsich
• [U-Boot] rockchip: pinctrl: rk3399: add support for I2C8   Philipp Tomsich
• [U-Boot] [U-Boot, 1/2] rockchip: fix turning off boot-mode via Kconfig   Philipp Tomsich
• [U-Boot] [U-Boot, 2/2] rockchip: defconfig: puma-rk3399: bypass ADC-based boot_mode check   Philipp Tomsich
• [U-Boot] [U-Boot, v2, 05/18] rockchip: pinctrl: rv1108: Move the iomux definitions into pinctrl-driver   Philipp Tomsich
• [U-Boot] [U-Boot, v2, 07/18] rockchip: pinctrl: rk3328: Move the iomux definitions into pinctrl-driver   Philipp Tomsich
• [U-Boot] [U-Boot, v2, 11/18] rockchip: configs: Enable GMAC configs for evb-rk3328   Philipp Tomsich
• [U-Boot] [U-Boot, v2, 10/18] net: gmac_rockchip: Add rk3328 gmac support   Philipp Tomsich
• [U-Boot] [U-Boot, v2, 12/18] rockchip: dts: rk3328: Add gmac2io support   Philipp Tomsich
• [U-Boot] [U-Boot, v2, 14/18] rockchip: pinctrl: rk322x: Move the iomux definitions into pinctrl-driver   Philipp Tomsich
• [U-Boot] [U-Boot, v2, 17/18] net: gmac_rockchip: Add support for the RK3228 GMAC   Philipp Tomsich
• [U-Boot] [U-Boot, v2, 18/18] config: evb-rk3229: Enable rk gmac configs   Philipp Tomsich
• [U-Boot] [U-Boot, v2, 13/18] rockchip: dts: rk3328-evb: Enable gmac2io for rk3328-evb   Philipp Tomsich
• [U-Boot] [PATCH v3 1/2] power: regulator: add driver for the FAN53555 family   Philipp Tomsich
• [U-Boot] [PATCH v3 2/2] rockchip: defconfig: puma-rk3399: enable FAN53555 regulator driver   Philipp Tomsich
• [U-Boot] [U-Boot, v2, 06/18] net: gmac_rockchip: Add support for the RV1108 GMAC   Philipp Tomsich
• [U-Boot] [U-Boot, v2, 08/18] rockchip: pinctrl: Add rk3328 gmac pinctrl support   Philipp Tomsich
• [U-Boot] [U-Boot, v2, 09/18] clk: rockchip: Add rk3328 gamc clock support   Philipp Tomsich
• [U-Boot] [U-Boot, v2, 15/18] rockchip: pinctrl: Add rk322x gmac pinctrl support   Philipp Tomsich
• [U-Boot] [U-Boot, v2, 16/18] clk: rockchip: Add rk322x gamc clock support   Philipp Tomsich
• [U-Boot] [PATCH v4 1/2] power: regulator: add driver for the FAN53555 family   Philipp Tomsich
• [U-Boot] [PATCH v4 2/2] rockchip: defconfig: puma-rk3399: enable FAN53555 regulator driver   Philipp Tomsich
• [U-Boot] [PATCH] MAINTAINERS: update maintained files for Rockchip   Philipp Tomsich
• [U-Boot] [PATCH 1/2] rockchip: rk3399-puma: add code to allow forcing a power-on reset   Philipp Tomsich
• [U-Boot] [PATCH 1/2] rockchip: rk3399-puma: add code to allow forcing a power-on reset   Philipp Tomsich
• [U-Boot] MAINTAINERS: update maintained files for Rockchip   Philipp Tomsich
• [U-Boot] rockchip: board: evb_rv1108: update README   Philipp Tomsich
• [U-Boot] [U-Boot, v2, 1/7] rockchip: rk3128: add device tree file   Philipp Tomsich
• [U-Boot] [U-Boot, v2, 2/7] rockchip: rk3128: add soc basic support   Philipp Tomsich
• [U-Boot] [U-Boot,v2,3/7] rockchip: rk3128: add clock driver   Philipp Tomsich
• [U-Boot] [U-Boot,v2,4/7] rockchip: rk3128: add pinctrl driver   Philipp Tomsich
• [U-Boot] [U-Boot, v2, 5/7] rockchip: rk3128: add evb-rk3128 support   Philipp Tomsich
• [U-Boot] [U-Boot, v2, 6/7] rockchip: rk3128: add defconfig for evb-rk3128   Philipp Tomsich
• [U-Boot] [U-Boot,v2,7/7] rockchip: rk3128: add sdram driver   Philipp Tomsich
• [U-Boot] rockchip: board: evb_rv1108: update README   Philipp Tomsich
• [U-Boot] [U-Boot, v2, 5/7] rockchip: rk3128: add evb-rk3128 support   Philipp Tomsich
• [U-Boot] MAINTAINERS: update maintained files for Rockchip   Philipp Tomsich
• [U-Boot] rockchip: board: evb_rv1108: update README   Philipp Tomsich
• [U-Boot] rockchip: board: evb_rv1108: update README   Philipp Tomsich
• [U-Boot] [U-Boot, v2, 1/7] rockchip: rk3128: add device tree file   Philipp Tomsich
• [U-Boot] [U-Boot, v2, 2/7] rockchip: rk3128: add soc basic support   Philipp Tomsich
• [U-Boot] [U-Boot,v2,4/7] rockchip: rk3128: add pinctrl driver   Philipp Tomsich
• [U-Boot] [U-Boot, v2, 6/7] rockchip: rk3128: add defconfig for evb-rk3128   Philipp Tomsich
• [U-Boot] [U-Boot,v2,7/7] rockchip: rk3128: add sdram driver   Philipp Tomsich
• [U-Boot] [U-Boot, 1/3] rockchip: boot mode: parse adc channel from dts   Philipp Tomsich
• [U-Boot] [U-Boot, 2/3] rockchip: rv1108: add adc key dt node for evb_rv1108   Philipp Tomsich
• [U-Boot] [U-Boot,3/3] rockchip: rv1108: call setup_boot_mode   Philipp Tomsich
• [U-Boot] [U-Boot, v2, 1/2] drivers/reset: support rockchip reset drivers   Philipp Tomsich
• [U-Boot] [U-Boot,v2,2/2] rockchip: clk: bind reset driver   Philipp Tomsich
• [U-Boot] [U-Boot, 1/3] rockchip: rk3036: fix pll config for correct frequency   Philipp Tomsich
• [U-Boot] [U-Boot, 2/3] rockchip: rk3036: update clock driver for ddr   Philipp Tomsich
• [U-Boot] [U-Boot, 3/3] rockchip: rk3036: sdram: correct setting for pll integer mode   Philipp Tomsich
• [U-Boot] [U-Boot,3/3] rockchip: rv1108: call setup_boot_mode   Philipp Tomsich
• [U-Boot] [U-Boot, v2, 1/2] drivers/reset: support rockchip reset drivers   Philipp Tomsich
• [U-Boot] [U-Boot,v2,2/2] rockchip: clk: bind reset driver   Philipp Tomsich
• [U-Boot] [U-Boot, 2/3] rockchip: rk3036: update clock driver for ddr   Philipp Tomsich
• [U-Boot] [U-Boot, 3/3] rockchip: rk3036: sdram: correct setting for pll integer mode   Philipp Tomsich
• [U-Boot] [U-Boot, v3, 1/7] rockchip: rk3128: add device tree file   Philipp Tomsich
• [U-Boot] [U-Boot, v3, 2/7] rockchip: rk3128: add soc basic support   Philipp Tomsich
• [U-Boot] [U-Boot,v3,3/7] rockchip: rk3128: add clock driver   Philipp Tomsich
• [U-Boot] [U-Boot,v3,4/7] rockchip: rk3128: add pinctrl driver   Philipp Tomsich
• [U-Boot] [U-Boot, v3, 5/7] rockchip: rk3128: add evb-rk3128 support   Philipp Tomsich
• [U-Boot] [U-Boot, v3, 6/7] rockchip: rk3128: add defconfig for evb-rk3128   Philipp Tomsich
• [U-Boot] [U-Boot,v3,7/7] rockchip: rk3128: add sdram driver   Philipp Tomsich
• [U-Boot] [U-Boot, 1/3] rockchip: rk3036: fix pll config for correct frequency   Philipp Tomsich
• [U-Boot] [U-Boot, 2/3] rockchip: rv1108: add adc key dt node for evb_rv1108   Philipp Tomsich
• [U-Boot] [U-Boot, 1/3] rockchip: boot mode: parse adc channel from dts   Philipp Tomsich
• [U-Boot] [PATCH v2 1/2] rockchip: rk3399-puma: add code to allow forcing a power-on reset   Philipp Tomsich
• [U-Boot] [PATCH v2 2/2] rockchip: dts: rk3399-puma: add /config/sysreset-gpio property   Philipp Tomsich
• [U-Boot] [U-Boot, v2, 1/3] rockchip: rk3036: fix pll config for correct frequency   Philipp Tomsich
• [U-Boot] [U-Boot, v2, 2/3] rockchip: rk3036: update clock driver for ddr   Philipp Tomsich
• [U-Boot] [U-Boot, v2, 3/3] rockchip: rk3036: sdram: correct setting for pll integer mode   Philipp Tomsich
• [U-Boot] [U-Boot, v3, 2/3] rockchip: rk3399-puma: implement usb_hub_reset_devices for puma-rk3399   Philipp Tomsich
• [U-Boot] [U-Boot, v3, 3/3] rockchip: dts: rk3399-puma: add a 'tsd, usb-port-power' stringlist for USB1   Philipp Tomsich
• [U-Boot] [U-Boot, v2, 2/2] rockchip: dts: rk3399-puma: add /config/sysreset-gpio property   Philipp Tomsich
• [U-Boot] [U-Boot, v2, 1/2] rockchip: rk3399-puma: add code to allow forcing a power-on reset   Philipp Tomsich
• [U-Boot] [linux-sunxi] Re: [PATCH] sunxi: add support for Banana Pi M2 Zero board   Chen-Yu Tsai
• [U-Boot] [PATCH 7/9] net: sun8i_emac: Fix build for non-H3/H5 SoCs   Chen-Yu Tsai
• [U-Boot] [PATCH 7/9] net: sun8i_emac: Fix build for non-H3/H5 SoCs   Chen-Yu Tsai
• [U-Boot] [PATCH v2 0/5] sunxi: Enable EMAC on various boards   Chen-Yu Tsai
• [U-Boot] [PATCH v2 1/5] bitfield: Include linux/bitops.h for ffs()   Chen-Yu Tsai
• [U-Boot] [PATCH v2 2/5] net: sun8i_emac: Support RX/TX delay chains   Chen-Yu Tsai
• [U-Boot] [PATCH v2 3/5] sunxi: Enable EMAC on the Cubietruck Plus   Chen-Yu Tsai
• [U-Boot] [PATCH v2 4/5] sunxi: Enable EMAC on the Bananapi M3   Chen-Yu Tsai
• [U-Boot] [PATCH v2 5/5] sunxi: Enable EMAC on the Bananapi M64   Chen-Yu Tsai
• [U-Boot] [PATCH v2 3/5] sunxi: Enable EMAC on the Cubietruck Plus   Chen-Yu Tsai
• [U-Boot] [PATCH 1/2] arm64: dts: sun50i: a64: Add USB host node for bananapi-m64   Chen-Yu Tsai
• [U-Boot] Parallel make issue with helloworld.efi   Tuomas Tynkkynen
• [U-Boot] [PATCH RFC] Makefile: Extend PYTHONPATH rather than overriding it   Tuomas Tynkkynen
• [U-Boot] [PATCH RFC] Makefile: Extend PYTHONPATH rather than overriding it   Tuomas Tynkkynen
• [U-Boot] Has versatilepb board support permanently been dropped in latest u-boot?   Tuomas Tynkkynen
• [U-Boot] [PATCH] x86: Add 'imply SCSI' to boards using AHCI_PCI   Tuomas Tynkkynen
• [U-Boot] [PATCH V2] armv8: ls1012a: Modify Kernel and Environment offset   Bhaskar Upadhaya
• [U-Boot] [PATCH V2] armv8: ls1012a: Modify Kernel and Environment offset   Bhaskar Upadhaya
• [U-Boot] [PATCH V3] armv8: ls1012a: Modify Kernel and Environment offset   Bhaskar Upadhaya
• [U-Boot] [PATCH 1/1] board: freescale: ls1012a: LS1012A-2G5RDB board support   Bhaskar Upadhaya
• [U-Boot] [PATCH v2] board: freescale: ls1012a: LS1012A-2G5RDB board support   Bhaskar Upadhaya
• [U-Boot] [RFC] Support for SGMII 2500   Bhaskar Upadhaya
• [U-Boot] [PATCH 1/3] armv8/kconfig: Align boards of same family at one place   Bhaskar Upadhaya
• [U-Boot] [PATCH v3 2/3] board: freescale: ls1012a: LS1012A-2G5RDB board support   Bhaskar Upadhaya
• [U-Boot] [PATCH 3/3] drivers: net: pfe_eth: Disable autonegotiation for 2.5G SGMII   Bhaskar Upadhaya
• [U-Boot] [PATCH 3/4] sunxi: Add default partition scheme   Emmanuel Vadot
• [U-Boot] [PATCH 3/4] sunxi: Add default partition scheme   Emmanuel Vadot
• [U-Boot] About the way to fix platform specific issue in source file xhci.c (U-Boot)   Marek Vasut
• [U-Boot] [PATCH 1/2] common: Generic file system firmware loader   Marek Vasut
• [U-Boot] [PATCH v3] DW SPI: Get clock value from Device Tree   Marek Vasut
• [U-Boot] [PATCH 1/2] common: Generic file system firmware loader   Marek Vasut
• [U-Boot] [PATCH 1/2] common: Generic file system firmware loader   Marek Vasut
• [U-Boot] [PATCH] MAINTAINERS: Update maintainer for USB xHCI   Marek Vasut
• [U-Boot] [PATCH v5 07/18] socfpga: boot0 hook: adjust to unified boot0 semantics   Marek Vasut
• [U-Boot] [PATCH v5 07/18] socfpga: boot0 hook: adjust to unified boot0 semantics   Marek Vasut
• [U-Boot] [PATCH 1/2] usb: xhci: implement FEAT_POWER hook for switching regulators for ports   Marek Vasut
• [U-Boot] [PATCH 1/2] common: Generic file system firmware loader   Marek Vasut
• [U-Boot] [PATCH 1/2] common: Generic file system firmware loader   Marek Vasut
• [U-Boot] [PATCH 1/2] common: Generic file system firmware loader   Marek Vasut
• [U-Boot] [PATCH] ARM: imx6: Adjust DDR DRAM settings on DHCOM i.MX6 PDK   Marek Vasut
• [U-Boot] [PATCH] ARM: rmobile: Fix eMMC signal voltage on Salvator-X/XS   Marek Vasut
• [U-Boot] [PATCH 1/2] common: Generic file system firmware loader   Marek Vasut
• [U-Boot] [PATCH] clk: rmobile: Add R8A7796 xHCI clock   Marek Vasut
• [U-Boot] [PATCH] net: ravb: Fix reset GPIO handling   Marek Vasut
• [U-Boot] [PATCH] usb: Add delay to fix USB 2.0 stick enumeration failure on LS208xA   Marek Vasut
• [U-Boot] [PATCH v4 1/2] SOCFPGA: clock manager: implement dw_spi_get_clk function   Marek Vasut
• [U-Boot] [PATCH v4 2/2] DW SPI: Get clock value from Device Tree   Marek Vasut
• [U-Boot] [PATCH] usb: Add delay to fix USB 2.0 stick enumeration failure on LS208xA   Marek Vasut
• [U-Boot] [PATCH] mmc: sd_sdhi: add support for 32-bit data buffer   Marek Vasut
• [U-Boot] [PATCH v5 2/2] DW SPI: Get clock value from Device Tree   Marek Vasut
• [U-Boot] [PATCH] mmc: sd_sdhi: add support for 32-bit data buffer   Marek Vasut
• [U-Boot] [PATCH 1/2] common: make bouncebuf work for non-DMA transfers   Marek Vasut
• [U-Boot] cadence_qspi_apb: cache issues on mach-socfpga   Marek Vasut
• [U-Boot] [PATCH 1/2] common: make bouncebuf work for non-DMA transfers   Marek Vasut
• [U-Boot] cadence_qspi_apb: cache issues on mach-socfpga   Marek Vasut
• [U-Boot] [PATCH 1/2] common: Generic file system firmware loader   Marek Vasut
• [U-Boot] [OE-core] [PATCH] u-boot: Upgrade to 2017.11 release   Marek Vasut
• [U-Boot] [OE-core] [PATCH] u-boot: Upgrade to 2017.11 release   Marek Vasut
• [U-Boot] [RFC PATCH] usb: ehci: do not invalidate a NULL buffer   Marek Vasut
• [U-Boot] [PATCH] usb: ehci: Fix accessors for big-endian platforms and descriptors   Marek Vasut
• [U-Boot] mtd: cfi: Add support for status register polling   Marek Vasut
• [U-Boot] mtd: cfi: Add support for status register polling   Marek Vasut
• [U-Boot] [PATCH] usb: r8a66597: Add support for RZ/A series   Marek Vasut
• [U-Boot] [PATCH] u-boot: Upgrade to 2017.11 release   Marek Vasut
• [U-Boot] [OE-core] [PATCH] u-boot: Upgrade to 2017.11 release   Marek Vasut
• [U-Boot] mtd: cfi: Add support for status register polling   Marek Vasut
• [U-Boot] [PATCH] usb: r8a66597: Add support for RZ/A series   Marek Vasut
• [U-Boot] [OE-core] [PATCH] u-boot: Upgrade to 2017.11 release   Marek Vasut
• [U-Boot] [PATCH 1/1] dm: usb: ehci: avoid possible NULL dereference   Marek Vasut
• [U-Boot] [PATCH V3] usb: xhci: Add Renesas R-Car xHCI driver   Marek Vasut
• [U-Boot] [PATCH V3] usb: xhci: Add Renesas R-Car xHCI driver   Marek Vasut
• [U-Boot] [PATCH 1/1] dm: usb: ehci: avoid possible NULL dereference   Marek Vasut
• [U-Boot] [PATCH] mtd: cfi: Fix checking status register feature   Marek Vasut
• [U-Boot] [PATCH v2 1/1] dm: usb: ehci: avoid possible NULL dereference   Marek Vasut
• [U-Boot] [RFC PATCH] usb: ehci: do not invalidate a NULL buffer   Marek Vasut
• [U-Boot] [PATCH 0/5] mmc: fixes for HS200/UHS core support   Marek Vasut
• [U-Boot] [PATCH v2 1/3] usb: hub: identify the hub-device to usb_hub_reset_devices   Marek Vasut
• [U-Boot] [PATCH v2 1/3] usb: hub: identify the hub-device to usb_hub_reset_devices   Marek Vasut
• [U-Boot] [PATCH v3 1/3] usb: hub: identify the hub-device to usb_hub_reset_devices   Marek Vasut
• [U-Boot] [PATCH v2 00/26] mmc: Add support for HS200 and UHS modes   Marek Vasut
• [U-Boot] [PATCH v3 1/3] usb: hub: identify the hub-device to usb_hub_reset_devices   Marek Vasut
• [U-Boot] [GIT] Pull request: u-boot-dfu (23.11.2017)   Marek Vasut
• [U-Boot] [PATCH 0/5] mmc: fixes for HS200/UHS core support   Marek Vasut
• [U-Boot] [PATCH] MAINTAINERS: Update maintainer for USB xHCI   Marek Vasut
• [U-Boot] [PATCH] usb: r8a66597: Add support for RZ/A series   Marek Vasut
• [U-Boot] [PATCH v2] usb: r8a66597: Add support for RZ/A series   Marek Vasut
• [U-Boot] [PULL] u-boot-usb/master   Marek Vasut
• [U-Boot] [PULL] u-boot-socfpga/master   Marek Vasut
• [U-Boot] [PATCH] fdtdec: Support parsing multiple /memory nodes   Marek Vasut
• [U-Boot] [PATCH] clk: rmobile: Move preboot clock shutdown to the driver   Marek Vasut
• [U-Boot] [PATCH] clk: rmobile: Add R8A7796 xHCI clock   Marek Vasut
• [U-Boot] [PATCH] serial: sh: Unify R8A7795 and R8A7796 as Gen3   Marek Vasut
• [U-Boot] [PATCH] i2c: rcar_iic: Add RCar IIC driver   Marek Vasut
• [U-Boot] [PATCH] net: ravb: Fix reset GPIO handling   Marek Vasut
• [U-Boot] [PATCH 01/23] ARM: rmobile: Fix eMMC signal voltage on ULCB   Marek Vasut
• [U-Boot] [PATCH 02/23] ARM: rmobile: Enable Micrel KSZ90x1 PHY driver on ULCB   Marek Vasut
• [U-Boot] [PATCH 03/23] ARM: rmobile: Drop CONFIG_USB_MAX_CONTROLLER_COUNT on Gen3 boards   Marek Vasut
• [U-Boot] [PATCH 04/23] ARM: rmobile: Drop SDHI address macros from Gen3   Marek Vasut
• [U-Boot] [PATCH 05/23] ARM: rmobile: Remove CONFIG_CMD_SDRAM from Salvator-X   Marek Vasut
• [U-Boot] [PATCH 06/23] ARM: rmobile: Clean up GIC macros   Marek Vasut
• [U-Boot] [PATCH 07/23] ARM: rmobile: Enable xHCI on RCar Gen3 boards   Marek Vasut
• [U-Boot] [PATCH 08/23] ARM: rmobile: Zap Gen3 PFC tables   Marek Vasut
• [U-Boot] [PATCH 09/23] ARM: rmobile: Stop using rcar-common/common.c on Gen3   Marek Vasut
• [U-Boot] [PATCH 10/23] ARM: rmobile: Dispose of r8a779x.h for Gen3   Marek Vasut
• [U-Boot] [PATCH 11/23] ARM: rmobile: Add PRR CPU ID macros   Marek Vasut
• [U-Boot] [PATCH 12/23] ARM: rmobile: Unify memory map for RCar Gen3   Marek Vasut
• [U-Boot] [PATCH 13/23] ARM: rmobile: Unify R8A7795 and R8A7796 in rmobile Makefile   Marek Vasut
• [U-Boot] [PATCH 14/23] ARM: rmobile: Drop CPU type ifdef from salvator-x   Marek Vasut
• [U-Boot] [PATCH 15/23] ARM: rmobile: Zap checkboard on Gen3   Marek Vasut
• [U-Boot] [PATCH 16/23] ARM: rmobile: Zap rmobile_sysinfo on Gen3   Marek Vasut
• [U-Boot] [PATCH 17/23] ARM: rmobile: Configure DRAM sizes from DT   Marek Vasut
• [U-Boot] [PATCH 18/23] ARM: rmobile: Zap ad-hoc DRAM configuration macros   Marek Vasut
• [U-Boot] [PATCH 19/23] ARM: rmobile: Clean up ad-hoc clock macros   Marek Vasut
• [U-Boot] [PATCH 20/23] ARM: rmobile: Remove SCIF configs   Marek Vasut
• [U-Boot] [PATCH 21/23] ARM: rmobile: Convert PRR to DM and OF control   Marek Vasut
• [U-Boot] [PATCH 22/23] ARM: rmobile: Use PRR driver on all Gen3 boards   Marek Vasut
• [U-Boot] [PATCH 23/23] ARM: rmobile: Migrate boards to RCar IIC drivers   Marek Vasut
• [U-Boot] [PATCH] usb: r8a66597: Add support for RZ/A series   Marek Vasut
• [U-Boot] [PATCH 1/4] pinctrl: rmobile: Add support for setting single pins   Marek Vasut
• [U-Boot] [PATCH 2/4] pfc: rmobile: Add hook to configure pin as GPIO   Marek Vasut
• [U-Boot] [PATCH 3/4] gpio: rmobile: Set GPIO mode in GPSR when requested   Marek Vasut
• [U-Boot] [PATCH 4/4] ARM: rmobile: Rework the ULCB CPLD driver   Marek Vasut
• [U-Boot] [PATCH] fdtdec: Support parsing multiple /memory nodes   Marek Vasut
• [U-Boot] [PATCH v2] usb: r8a66597: convert wait loop to readw_poll_timeout   Marek Vasut
• [U-Boot] [PATCH] usb: r8a66597: Add support for RZ/A series   Marek Vasut
• [U-Boot] [PATCH 1/2] ARM: socfpga: remove unused CONFIG_NAND_DENALI_ECC_SIZE   Marek Vasut
• [U-Boot] [PATCH] i2c: rcar_iic: Add RCar IIC driver   Marek Vasut
• [U-Boot] [PATCH V10 1/4] usb: rockchip: add the rockusb gadget   Marek Vasut
• [U-Boot] [PATCH] mtd: cfi: Fix checking status register feature   Marek Vasut
• [U-Boot] [GIT] Pull request: u-boot-dfu (30.11.2017)   Marek Vasut
• [U-Boot] [PULL] u-boot-sh/rmobile-mx   Marek Vasut
• [U-Boot] [PATCH] mx6: Fix imx6_is_bmode_from_gpr9 always returns 0   Jeroen Vollenbrock
• [U-Boot] [U-Boot, v5, 1/3] thermal: ti-bandgap: Add support for temperature sensor   Lokesh Vutla
• [U-Boot] [PATCH] TI: am57xx; Remove am57xx_evm_nodt_defconfig   Lokesh Vutla
• [U-Boot] U-Boot proper(not SPL) relocate option   Lokesh Vutla
• [U-Boot] U-Boot as a multiboot GRUB2 payload   Dan Walkes
• [U-Boot] About the way to fix platform specific issue in source file xhci.c (U-Boot)   Ran Wang
• [U-Boot] About the way to fix platform specific issue in source file xhci.c (U-Boot)   Ran Wang
• [U-Boot] About the way to fix platform specific issue in source file xhci.c (U-Boot)   Ran Wang
• [U-Boot] About the way to fix platform specific issue in source file xhci.c (U-Boot)   Ran Wang
• [U-Boot] [PATCH] armv8: Workaround for USB erratua on LS1012A   Ran Wang
• [U-Boot] [PATCH] usb: Add delay to fix USB 2.0 stick enumeration failure on LS208xA   Ran Wang
• [U-Boot] [PATCH] usb: Add delay to fix USB 2.0 stick enumeration failure on LS208xA   Ran Wang
• [U-Boot] [PATCH 1/2] powerpc/T104xRDB: Fix endian access issue on EHCI intinalization   Ran Wang
• [U-Boot] [PATCH 2/2] powerpc/p1_p2_rdb_pc: Fix endian access issue on EHCI intinalization   Ran Wang
• [U-Boot] Build failure in u-boot-mmc/master: undefined reference to error   Stephen Warren
• [U-Boot] [PATCH] arm64: support running at addr other than linked to   Stephen Warren
• [U-Boot] [PATCH] test/py: Add dependency on HUSH parser   Stephen Warren
• [U-Boot] [PATCH 13/13] binman: tegra: Convert to use binman   Stephen Warren
• [U-Boot] [PATCH] test/py: Add dependency on HUSH parser   Stephen Warren
• [U-Boot] [PATCH 4/5] test/py: Allow any unit test suite to be found   Stephen Warren
• [U-Boot] Build failure in u-boot-mmc/master: undefined reference to error   Stephen Warren
• [U-Boot] [PATCH] fdtdec: Support parsing multiple /memory nodes   Lothar Waßmann
• [U-Boot] [PATCH v3 0/7] Add support for GE PPD   Martyn Welch
• [U-Boot] [PATCH v3 1/7] imx: mxc_i2c: tweak the i2c transfer method   Martyn Welch
• [U-Boot] [PATCH v3 2/7] ext4: recover from filesystem corruption when reading   Martyn Welch
• [U-Boot] [PATCH v3 3/7] pwm: imx: Enable PWM support on i.MX53   Martyn Welch
• [U-Boot] [PATCH v3 4/7] arm: mx5: Add more register definitions   Martyn Welch
• [U-Boot] [PATCH v3 5/7] bootcount: add support for bootcounter on EXT filesystem   Martyn Welch
• [U-Boot] [PATCH v3 6/7] rtc: add support for s35392a   Martyn Welch
• [U-Boot] [PATCH v3 7/7] mx53: Add Board support for GE PPD   Martyn Welch
• [U-Boot] [PATCH v3 3/7] pwm: imx: Enable PWM support on i.MX53   Martyn Welch
• [U-Boot] [PATCH v3 7/7] mx53: Add Board support for GE PPD   Martyn Welch
• [U-Boot] [PATCH v4 0/8] Add support for GE PPD   Martyn Welch
• [U-Boot] [PATCH v4 1/8] imx: mxc_i2c: tweak the i2c transfer method   Martyn Welch
• [U-Boot] [PATCH v4 2/8] ext4: recover from filesystem corruption when reading   Martyn Welch
• [U-Boot] [PATCH v4 3/8] pwm: imx: Enable PWM support on i.MX53   Martyn Welch
• [U-Boot] [PATCH v4 4/8] arm: mx5: Add more register definitions   Martyn Welch
• [U-Boot] [PATCH v4 5/8] bootcount: add support for bootcounter on EXT filesystem   Martyn Welch
• [U-Boot] [PATCH v4 6/8] rtc: add support for s35392a   Martyn Welch
• [U-Boot] [PATCH v4 7/8] board: ge: make VPD code common   Martyn Welch
• [U-Boot] [PATCH v4 8/8] mx53: Add Board support for GE PPD   Martyn Welch
• [U-Boot] [PATCH v5 0/8] Add support for GE PPD   Martyn Welch
• [U-Boot] [PATCH v5 1/8] imx: mxc_i2c: tweak the i2c transfer method   Martyn Welch
• [U-Boot] [PATCH v5 2/8] ext4: recover from filesystem corruption when reading   Martyn Welch
• [U-Boot] [PATCH v5 3/8] pwm: imx: Enable PWM support on i.MX53   Martyn Welch
• [U-Boot] [PATCH v5 4/8] arm: mx5: Add more register definitions   Martyn Welch
• [U-Boot] [PATCH v5 5/8] bootcount: add support for bootcounter on EXT filesystem   Martyn Welch
• [U-Boot] [PATCH v5 6/8] rtc: add support for s35392a   Martyn Welch
• [U-Boot] [PATCH v5 7/8] board: ge: make VPD code common   Martyn Welch
• [U-Boot] [PATCH v5 8/8] mx53: Add Board support for GE PPD   Martyn Welch
• [U-Boot] [PATCH v5 0/8] Add support for GE PPD   Martyn Welch
• [U-Boot] [PATCH v5 1/8] imx: mxc_i2c: tweak the i2c transfer method   Martyn Welch
• [U-Boot] [PATCH v5 2/8] ext4: recover from filesystem corruption when reading   Martyn Welch
• [U-Boot] [PATCH v5 3/8] pwm: imx: Enable PWM support on i.MX53   Martyn Welch
• [U-Boot] [PATCH v5 4/8] arm: mx5: Add more register definitions   Martyn Welch
• [U-Boot] [PATCH v5 5/8] bootcount: add support for bootcounter on EXT filesystem   Martyn Welch
• [U-Boot] [PATCH v5 6/8] rtc: add support for s35392a   Martyn Welch
• [U-Boot] [PATCH v5 7/8] board: ge: make VPD code common   Martyn Welch
• [U-Boot] [PATCH 00/16] Updates / improvements to bx50v3 support   Martyn Welch
• [U-Boot] [PATCH 01/16] board: ge: mx53ppd: Move check_time() to common location   Martyn Welch
• [U-Boot] [PATCH 02/16] net: e1000: add support for writing to EEPROM   Martyn Welch
• [U-Boot] [PATCH 03/16] net: e1000: split e1000_read_mac_addr   Martyn Welch
• [U-Boot] [PATCH 04/16] net: e1000: implement eth_write_hwaddr   Martyn Welch
• [U-Boot] [PATCH 05/16] rtc: adding RX8010SJ rtc driver   Martyn Welch
• [U-Boot] [PATCH 06/16] board: ge: Enable access to i2c bus 1 and 2   Martyn Welch
• [U-Boot] [PATCH 07/16] configs: Add network device support for bx50v3 products   Martyn Welch
• [U-Boot] [PATCH 08/16] board: ge: bx50v3: move FEC MAC address programming to driver   Martyn Welch
• [U-Boot] [PATCH 09/16] board: ge: bx50v3: program MAC address to I210   Martyn Welch
• [U-Boot] [PATCH 10/16] board: ge: bx50v3: Enable hardware watchdog   Martyn Welch
• [U-Boot] [PATCH 11/16] board: ge: bx50v3: Support FIT and select configuration based on VPD   Martyn Welch
• [U-Boot] [PATCH 12/16] config: ge_bx50v3: read boot script   Martyn Welch
• [U-Boot] [PATCH 13/16] configs: ge_bx50v3: enable bootcount   Martyn Welch
• [U-Boot] [PATCH 14/16] board: ge: bx50v3: mount rootfs read-only   Martyn Welch
• [U-Boot] [PATCH 15/16] configs: ge_bx50v3: automatic partition selection and video output failure message   Martyn Welch
• [U-Boot] [PATCH 16/16] board,ge,bx50v3 - rtc time validation   Martyn Welch
• [U-Boot] [PATCH v5 0/8] Add support for GE PPD   Martyn Welch
• [U-Boot] [RFC PATCH 1/2] board: laird: add WB45N CPU module   Ben Whitten
• [U-Boot] [PATCH v2 0/2] Resubmitting support for Lairds WB boards   Ben Whitten
• [U-Boot] [PATCH v2 1/2] board: laird: add WB45N CPU module   Ben Whitten
• [U-Boot] [PATCH v2 2/2] board: laird: add WB50N CPU module   Ben Whitten
• [U-Boot] [PATCH] omap3: evm: Explicitly use DISTRO_DEFAULTS features at startup   Derald D. Woods
• [U-Boot] [PATCH v2 00/18] Add gmac support for rk3399-evb rv1108-evb rk3328-evb and rk3229-evb   David Wu
• [U-Boot] [PATCH v2 01/18] rockchip: clk: Add mac clock set for rk3399   David Wu
• [U-Boot] [PATCH v2 02/18] rockchip: dts: rk3399-evb: Change the tx/rx delay value for transmission quality   David Wu
• [U-Boot] [PATCH v2 03/18] rockchip: configs: Enable CONFIG_NET_RANDOM_ETHADDR for rk3288-evb   David Wu
• [U-Boot] [PATCH v2 04/18] rockchip: grf_rv1108.h: Fix the grf offsets   David Wu
• [U-Boot] [PATCH v2 05/18] rockchip: pinctrl: rv1108: Move the iomux definitions into pinctrl-driver   David Wu
• [U-Boot] [PATCH v2 06/18] net: gmac_rockchip: Add support for the RV1108 GMAC   David Wu
• [U-Boot] [PATCH v2 07/18] rockchip: pinctrl: rk3328: Move the iomux definitions into pinctrl-driver   David Wu
• [U-Boot] [PATCH v2 08/18] rockchip: pinctrl: Add rk3328 gmac pinctrl support   David Wu
• [U-Boot] [PATCH v2 09/18] clk: rockchip: Add rk3328 gamc clock support   David Wu
• [U-Boot] [PATCH v2 10/18] net: gmac_rockchip: Add rk3328 gmac support   David Wu
• [U-Boot] [PATCH v2 11/18] rockchip: configs: Enable GMAC configs for evb-rk3328   David Wu
• [U-Boot] [PATCH v2 12/18] rockchip: dts: rk3328: Add gmac2io support   David Wu
• [U-Boot] [PATCH v2 13/18] rockchip: dts: rk3328-evb: Enable gmac2io for rk3328-evb   David Wu
• [U-Boot] [PATCH v2 14/18] rockchip: pinctrl: rk322x: Move the iomux definitions into pinctrl-driver   David Wu
• [U-Boot] [PATCH v2 15/18] rockchip: pinctrl: Add rk322x gmac pinctrl support   David Wu
• [U-Boot] [PATCH v2 16/18] clk: rockchip: Add rk322x gamc clock support   David Wu
• [U-Boot] [PATCH v2 17/18] net: gmac_rockchip: Add support for the RK3228 GMAC   David Wu
• [U-Boot] [PATCH v2 18/18] config: evb-rk3229: Enable rk gmac configs   David Wu
• [U-Boot] SPDX License status   Masahiro Yamada
• [U-Boot] [PATCH] Revert "console: simplify puts()"   Masahiro Yamada
• [U-Boot] [PATCH 0/5] libfdt: Reduce duplicated copies of libfdt   Masahiro Yamada
• [U-Boot] [PATCH 1/1] Makefile: add coccicheck target   Masahiro Yamada
• [U-Boot] [PATCH 1/1] Makefile: add coccicheck target   Masahiro Yamada
• [U-Boot] [PATCH 00/22] mtd: nand: imports NAND core updates from Linux 4.15-rc1 and sync Denali driver   Masahiro Yamada
• [U-Boot] [PATCH 01/22] bitops: collect BIT macros to include/linux/bitops.h   Masahiro Yamada
• [U-Boot] [PATCH 02/22] mtd: nand: add onfi_* stubs in case ONFI_DETECTION is disabled   Masahiro Yamada
• [U-Boot] [PATCH 03/22] mtd: nand: Add an option to maximize the ECC strength   Masahiro Yamada
• [U-Boot] [PATCH 04/22] mtd: nand: remove unnecessary 'extern' from function declarations   Masahiro Yamada
• [U-Boot] [PATCH 05/22] mtd: nand: Create a NAND reset function   Masahiro Yamada
• [U-Boot] [PATCH 06/22] mtd: nand: Introduce nand_data_interface   Masahiro Yamada
• [U-Boot] [PATCH 07/22] mtd: nand: convert ONFI mode into data interface   Masahiro Yamada
• [U-Boot] [PATCH 08/22] mtd: nand: Expose data interface for ONFI mode 0   Masahiro Yamada
• [U-Boot] [PATCH 09/22] mtd: nand: automate NAND timings selection   Masahiro Yamada
• [U-Boot] [PATCH 10/22] mtd: nand: Fix data interface configuration logic   Masahiro Yamada
• [U-Boot] [PATCH 11/22] mtd: nand: Add a few more timings to nand_sdr_timings   Masahiro Yamada
• [U-Boot] [PATCH 12/22] mtd: nand: Support controllers with custom page   Masahiro Yamada
• [U-Boot] [PATCH 13/22] mtd: add mtd_ooblayout_xxx() helper functions   Masahiro Yamada
• [U-Boot] [PATCH 14/22] mtd: nand: Drop unused cached programming support   Masahiro Yamada
• [U-Boot] [PATCH 15/22] mtd: nand: Drop the ->errstat() hook   Masahiro Yamada
• [U-Boot] [PATCH 16/22] mtd: nand: Wait for PAGEPROG to finish in drivers setting NAND_ECC_CUSTOM_PAGE_ACCESS   Masahiro Yamada
• [U-Boot] [PATCH 17/22] mtd: nand: allow drivers to request minimum alignment for passed buffer   Masahiro Yamada
• [U-Boot] [PATCH 18/22] mtd: nand: Pass the CS line to ->setup_data_interface()   Masahiro Yamada
• [U-Boot] [PATCH 19/22] mtd: nand: add generic helpers to check, match, maximize ECC settings   Masahiro Yamada
• [U-Boot] [PATCH 20/22] mtd: nand: add a shorthand to generate nand_ecc_caps structure   Masahiro Yamada
• [U-Boot] [PATCH 21/22] mtd: nand: introduce NAND_ROW_ADDR_3 flag   Masahiro Yamada
• [U-Boot] [PATCH 22/22] mtd: nand: denali: sync with Linux 4.15-rc1   Masahiro Yamada
• [U-Boot] [PATCH 0/5] ARM: uniphier: UniPhier updates for v2018.01-rc1   Masahiro Yamada
• [U-Boot] [PATCH 1/5] ARM: uniphier: set CONFIG_LOGLEVEL to 6   Masahiro Yamada
• [U-Boot] [PATCH 2/5] ARM: uniphier: remove IRQ settings   Masahiro Yamada
• [U-Boot] [PATCH 3/5] ARM: uniphier: remove XIRQ pin settings   Masahiro Yamada
• [U-Boot] [PATCH 0/5] ARM: uniphier: UniPhier updates for v2018.01-rc1   Masahiro Yamada
• [U-Boot] [PATCH 1/5] ARM: uniphier: set CONFIG_LOGLEVEL to 6   Masahiro Yamada
• [U-Boot] [PATCH 2/5] ARM: uniphier: remove IRQ settings   Masahiro Yamada
• [U-Boot] [PATCH 3/5] ARM: uniphier: remove XIRQ pin settings   Masahiro Yamada
• [U-Boot] [PATCH 4/5] gpio: uniphier: import dt-binginds header from Linux   Masahiro Yamada
• [U-Boot] [PATCH 5/5] ARM: dts: uniphier: Sync with Linux 4.15-rc1   Masahiro Yamada
• [U-Boot] U-Boot proper(not SPL) relocate option   Masahiro Yamada
• [U-Boot] [PATCH] binman: do not add binary files to git   Masahiro Yamada
• [U-Boot] [PATCH] fixup! mtd: nand: denali: sync with Linux 4.15-rc1   Masahiro Yamada
• [U-Boot] [PATCH] ARM: uniphier: remove unused NAND CONFIG options   Masahiro Yamada
• [U-Boot] [PATCH 0/2] libfdt: sync fdt_wip.c with upstream   Masahiro Yamada
• [U-Boot] [PATCH 1/2] libfdt: move fdt_find_regions() to fdt_region.c from fdt_wip.c   Masahiro Yamada
• [U-Boot] [PATCH 2/2] libfdt: migrate fdt_wip.c to a wrapper of scripts/dtc/libfdt/fdt_wip.c   Masahiro Yamada
• [U-Boot] [PATCH 00/22] mtd: nand: imports NAND core updates from Linux 4.15-rc1 and sync Denali driver   Masahiro Yamada
• [U-Boot] [PATCH 0/5] ARM: uniphier: UniPhier updates for v2018.01-rc1   Masahiro Yamada
• [U-Boot] [PATCH] ARM: uniphier: remove unused NAND CONFIG options   Masahiro Yamada
• [U-Boot] [GIT PULL] NAND + UniPhier updates for v2018.01-rc1   Masahiro Yamada
• [U-Boot] [PATCH] ARM: zynq: remove unused CONFIG_ZC770_XM01* options   Masahiro Yamada
• [U-Boot] [PATCH 0/5] Remove assert()   Masahiro Yamada
• [U-Boot] [PATCH 1/5] Move CONFIG_PANIC_HANG to Kconfig   Masahiro Yamada
• [U-Boot] [PATCH 2/5] ARM: openrd: set CONFIG_LOGLEVEL to 2   Masahiro Yamada
• [U-Boot] [PATCH 3/5] Enable CONFIG_PANIC_HANG for boards without do_reset()   Masahiro Yamada
• [U-Boot] [PATCH 4/5] treewide: convert assert() to BUG_ON()   Masahiro Yamada
• [U-Boot] [PATCH 5/5] Remove assert()   Masahiro Yamada
• [U-Boot] [GIT PULL] NAND + UniPhier updates for v2018.01-rc1   Masahiro Yamada
• [U-Boot] [PATCH 0/5] Remove assert()   Masahiro Yamada
• [U-Boot] [PATCH 2/5] ARM: openrd: set CONFIG_LOGLEVEL to 2   Masahiro Yamada
• [U-Boot] [GIT PULL] NAND + UniPhier updates for v2018.01-rc1 (2nd trial)   Masahiro Yamada
• [U-Boot] [PATCH 0/5] Remove assert()   Masahiro Yamada
• [U-Boot] [PATCH 0/5] Remove assert()   Masahiro Yamada
• [U-Boot] [PATCH] ARM: uniphier: clean up board_init   Masahiro Yamada
• [U-Boot] [PATCH] drivers: firmware: psci: use pr_* log functions instead of printf()   Masahiro Yamada
• [U-Boot] U-Boot proper(not SPL) relocate option   Masahiro Yamada
• [U-Boot] U-Boot proper(not SPL) relocate option   Masahiro Yamada
• [U-Boot] [PATCH 1/2] ARM: socfpga: remove unused CONFIG_NAND_DENALI_ECC_SIZE   Masahiro Yamada
• [U-Boot] [PATCH 2/2] ARM: socfpga: remove unneeded CONFIG_SYS_NAND_USE_FLASH_BBT   Masahiro Yamada
• [U-Boot] [PATCH] mtd: nand: denali: remove bogus __maybe_unused   Masahiro Yamada
• [U-Boot] [PATCH] mtd: nand: denali: remove ad-hoc board_nand_init() entry   Masahiro Yamada
• [U-Boot] [PATCH] binman: do not add binary files to git   Masahiro Yamada
• [U-Boot] [PATCH 4/5] treewide: convert assert() to BUG_ON()   Masahiro Yamada
• [U-Boot] [PATCH 1/4] mtd: nand: Rename nand.h into rawnand.h   Masahiro Yamada
• [U-Boot] [PATCH 2/4] mtd: nand: include <asm/cache.h> from include/linux/mtd/rawnand.h   Masahiro Yamada
• [U-Boot] [PATCH 3/4] mtd: nand: denali_dt: replace printf() with pr_err()   Masahiro Yamada
• [U-Boot] [PATCH 4/4] mtd: nand: denali: consolidate include directives   Masahiro Yamada
• [U-Boot] [PATCH v5 02/18] rockchip: boot0: align to 0x20 for armv7 '_start'   Andy Yan
• [U-Boot] [PATCH v3 0/3] Most rockchip platform based boards use a key to instruct   Andy Yan
• [U-Boot] [U-Boot, v3, 1/3] rockchip: make boot_mode related codes reused across all platforms   Andy Yan
• [U-Boot] [U-Boot, v3, 3/3] rockchip: check download key before bootup   Andy Yan
• [U-Boot] [PATCH] rockchip: board: evb_rv1108: update README   Andy Yan
• [U-Boot] [PATCH 0/3] Support driving rv1108 evb board to bootrom download mode by adc key   Andy Yan
• [U-Boot] [PATCH 1/3] rockchip: boot mode: parse adc channel from dts   Andy Yan
• [U-Boot] [PATCH 2/3] rockchip: rv1108: add adc key dt node for evb_rv1108   Andy Yan
• [U-Boot] [PATCH 3/3] rockchip: rv1108: call setup_boot_mode   Andy Yan
• [U-Boot] [U-Boot, 1/3] rockchip: boot mode: parse adc channel from dts   Andy Yan
• [U-Boot] [U-Boot, 1/3] rockchip: boot mode: parse adc channel from dts   Andy Yan
• [U-Boot] [PATCH 1/3] spl: set SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR to 0x4000 for rockchip   Kever Yang
• [U-Boot] [PATCH 2/3] rockchip: doc: update U-Boot location info   Kever Yang
• [U-Boot] [PATCH 3/3] rockchip: remove SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR from defconfig   Kever Yang
• [U-Boot] [PATCH] armv8: update gd after relocate   Kever Yang
• [U-Boot] [PATCH v3 1/2] rockchip: sysreset: merge into one common driver   Kever Yang
• [U-Boot] [PATCH v3 2/2] rockchip: clock: update sysreset driver bingding   Kever Yang
• [U-Boot] [PATCH 1/2] drivers/reset: support rockchip reset drivers   Kever Yang
• [U-Boot] [PATCH 2/2] rockchip: clk: add device_bind_driver_to_node for reset driver   Kever Yang
• [U-Boot] [RESEND PATCH 1/2] drivers/reset: support rockchip reset drivers   Kever Yang
• [U-Boot] [RESEND PATCH 2/2] rockchip: clk: add device_bind_driver_to_node for reset driver   Kever Yang
• [U-Boot] [PATCH] rockchip: rock: remove CONFIG_ENV_OFFSEt   Kever Yang
• [U-Boot] [PATCH 1/2] rockchip: config: sync the ENV offset from rockchip legacy U-Boot   Kever Yang
• [U-Boot] [PATCH 2/3] rockchip: doc: update U-Boot location info   Kever Yang
• [U-Boot] [PATCH 1/3] spl: set SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR to 0x4000 for rockchip   Kever Yang
• [U-Boot] [PATCH 1/3] spl: set SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR to 0x4000 for rockchip   Kever Yang
• [U-Boot] [PATCH v5 02/18] rockchip: boot0: align to 0x20 for armv7 '_start'   Kever Yang
• [U-Boot] [PATCH] rockchip: update boot0 hook   Kever Yang
• [U-Boot] U-Boot proper(not SPL) relocate option   Kever Yang
• [U-Boot] U-Boot proper(not SPL) relocate option   Kever Yang
• [U-Boot] re-use dm data for pre-relocate and post-relocate   Kever Yang
• [U-Boot] U-Boot proper(not SPL) relocate option   Kever Yang
• [U-Boot] [PATCH 00/10] rockchip: add tpl and OPTEE support for rk3229   Kever Yang
• [U-Boot] [PATCH v2 0/7] rockchip: add new SoC support for RK3128   Kever Yang
• [U-Boot] [PATCH v2 1/7] rockchip: rk3128: add device tree file   Kever Yang
• [U-Boot] [PATCH v2 2/7] rockchip: rk3128: add soc basic support   Kever Yang
• [U-Boot] [PATCH v2 3/7] rockchip: rk3128: add clock driver   Kever Yang
• [U-Boot] [PATCH v2 4/7] rockchip: rk3128: add pinctrl driver   Kever Yang
• [U-Boot] [PATCH v2 5/7] rockchip: rk3128: add evb-rk3128 support   Kever Yang
• [U-Boot] [PATCH v2 6/7] rockchip: rk3128: add defconfig for evb-rk3128   Kever Yang
• [U-Boot] [PATCH v2 7/7] rockchip: rk3128: add sdram driver   Kever Yang
• [U-Boot] [U-Boot, RESEND, 2/2] rockchip: clk: add device_bind_driver_to_node for reset driver   Kever Yang
• [U-Boot] [U-Boot, RESEND, 1/2] drivers/reset: support rockchip reset drivers   Kever Yang
• [U-Boot] [PATCH v2 1/2] drivers/reset: support rockchip reset drivers   Kever Yang
• [U-Boot] [PATCH v2 2/2] rockchip: clk: bind reset driver   Kever Yang
• [U-Boot] [PATCH 1/3] rockchip: rk3036: fix pll config for correct frequency   Kever Yang
• [U-Boot] [PATCH 2/3] rockchip: rk3036: update clock driver for ddr   Kever Yang
• [U-Boot] [PATCH 3/3] rockchip: rk3036: sdram: correct setting for pll integer mode   Kever Yang
• [U-Boot] [PATCH v3 0/7] rockchip: add new SoC support for RK3128   Kever Yang
• [U-Boot] [PATCH v3 1/7] rockchip: rk3128: add device tree file   Kever Yang
• [U-Boot] [PATCH v3 2/7] rockchip: rk3128: add soc basic support   Kever Yang
• [U-Boot] [PATCH v3 3/7] rockchip: rk3128: add clock driver   Kever Yang
• [U-Boot] [PATCH v3 4/7] rockchip: rk3128: add pinctrl driver   Kever Yang
• [U-Boot] [PATCH v3 5/7] rockchip: rk3128: add evb-rk3128 support   Kever Yang
• [U-Boot] [PATCH v3 6/7] rockchip: rk3128: add defconfig for evb-rk3128   Kever Yang
• [U-Boot] [PATCH v3 7/7] rockchip: rk3128: add sdram driver   Kever Yang
• [U-Boot] [RESEND PATCH v3 0/7] rockchip: add new SoC support for RK3128   Kever Yang
• [U-Boot] [RESEND PATCH v3 1/7] rockchip: rk3128: add device tree file   Kever Yang
• [U-Boot] [RESEND PATCH v3 2/7] rockchip: rk3128: add soc basic support   Kever Yang
• [U-Boot] [RESEND PATCH v3 3/7] rockchip: rk3128: add clock driver   Kever Yang
• [U-Boot] [RESEND PATCH v3 4/7] rockchip: rk3128: add pinctrl driver   Kever Yang
• [U-Boot] [RESEND PATCH v3 5/7] rockchip: rk3128: add evb-rk3128 support   Kever Yang
• [U-Boot] [RESEND PATCH v3 6/7] rockchip: rk3128: add defconfig for evb-rk3128   Kever Yang
• [U-Boot] [RESEND PATCH v3 7/7] rockchip: rk3128: add sdram driver   Kever Yang
• [U-Boot] [U-Boot, 1/3] rockchip: rk3036: fix pll config for correct frequency   Kever Yang
• [U-Boot] [PATCH v2 1/3] rockchip: rk3036: fix pll config for correct frequency   Kever Yang
• [U-Boot] [PATCH v2 2/3] rockchip: rk3036: update clock driver for ddr   Kever Yang
• [U-Boot] [PATCH v2 3/3] rockchip: rk3036: sdram: correct setting for pll integer mode   Kever Yang
• [U-Boot] [PATCH] clk: at91: Kconfig: fix the dependency of AT91_UTMI   Wenyou Yang
• [U-Boot] [PATCH 0/2] clk: at91: clk-generated: Improvement   Wenyou Yang
• [U-Boot] [PATCH 1/2] clk: at91: clk-generated: select absolute closest rate   Wenyou Yang
• [U-Boot] [PATCH 2/2] clk: at91: clk-generated: fix incorrect index of clk source   Wenyou Yang
• [U-Boot] [PATCH] mmc: atmel_sdhci: not on capabilities to set gck rate   Wenyou Yang
• [U-Boot] [PATCH 0/2] board: atmel: Add new board SAMA5D2 PTC EK   Wenyou Yang
• [U-Boot] [PATCH 1/2] ARM: at91: add sama5d2 smc header   Wenyou Yang
• [U-Boot] [PATCH 2/2] board: atmel: add sama5d2_ptc_ek board   Wenyou Yang
• [U-Boot] [PATCH 1/2] i2c: at91_i2c: Wait for TXRDY after sending the first byte   Yang, Wenyou
• [U-Boot] [PATCH 2/2] i2c: at91_i2c: remove the .probe_chip function   Yang, Wenyou
• [U-Boot] [PATCH] gpt: add part-uuid and part-num subcommands   Andrey Yurovsky
• [U-Boot] [PATCH] gpt: add part-uuid and part-num subcommands   Andrey Yurovsky
• [U-Boot] [PATCH] gpt: add part-uuid and part-num subcommands   Andrey Yurovsky
• [U-Boot] [PATCH] gpt: add part-uuid and part-num subcommands   Andrey Yurovsky
• [U-Boot] [PATCH] sunxi: set the default CPUx frequency of H5 to 816MHz   Icenowy Zheng
• [U-Boot] [PATCH] sunxi: add support for Banana Pi M2 Zero board   Icenowy Zheng
• [U-Boot] [linux-sunxi] Re: [PATCH] sunxi: add support for Banana Pi M2 Zero board   Icenowy Zheng
• [U-Boot] [PATCH v2 0/2] Fix DE2 SimpleFB node creation and support LCD SimpleFB   Icenowy Zheng
• [U-Boot] [PATCH v2 1/2] video: sunxi: de2: fix SimpleFB node creation when HDMI not initialized   Icenowy Zheng
• [U-Boot] [PATCH v2 2/2] video: sunxi: de2: add support for LCD SimpleFB   Icenowy Zheng
• [U-Boot] [linux-sunxi] Re: [PATCH] sunxi: add support for Banana Pi M2 Zero board   Icenowy Zheng
• [U-Boot] [linux-sunxi] Re: [PATCH] sunxi: add support for Banana Pi M2 Zero board   Icenowy Zheng
• [U-Boot] [PATCH] sunxi: lower the DRAM frequency of Nano Pi NEO2 to 504MHz   Icenowy Zheng
• [U-Boot] [PATCH] sunxi: lower the DRAM frequency of Nano Pi NEO2 to 504MHz   Icenowy Zheng
• [U-Boot] [PATCH] sunxi: add support for Orange Pi R1 board   Icenowy Zheng
• [U-Boot] [PATCH] sunxi: add support for Orange Pi R1 board   Icenowy Zheng
• [U-Boot] [PATCH] enable debug uart   rick at andestech.com
• [U-Boot] [PATCH 1/3] ae3xx: timer: Rename AE3XX to ATCPIT100   rick at andestech.com
• [U-Boot] [PATCH] atcpit100: timer: Remove arch dependency.   rick at andestech.com
• [U-Boot] [PATCH 2/3] nds32: defconfig: Rename AE3XX_TIMER to ATCPIT100_TIMER   rick at andestech.com
• [U-Boot] [PATCH 1/3] ae3xx: timer: Rename AE3XX to ATCPIT100   rick at andestech.com
• [U-Boot] [PATCH v3 1/4] ae3xx: timer: Rename AE3XX to ATCPIT100   rick at andestech.com
• [U-Boot] [PATCH v3 1/4] ae3xx: timer: Rename AE3XX to ATCPIT100   rick at andestech.com
• [U-Boot] Uboot send pull request   uboot at andestech.com
• [U-Boot] booting bare metal application in secure mode on cubieboard2   cicerog
• [U-Boot] u-boot <=> kernel compatibility?   daggs
• [U-Boot] u-boot <=> kernel compatibility?   daggs
• [U-Boot] u-boot <=> kernel compatibility?   daggs
• [U-Boot] u-boot <=> kernel compatibility?   daggs
• [U-Boot] u-boot <=> kernel compatibility?   daggs
• [U-Boot] [PATCH v2 5/5] tpm: add more missing va_end()   sjg at google.com
• [U-Boot] [PATCH] dm: core: fix member name in ofnode_union documentation   sjg at google.com
• [U-Boot] [PATCH 4/5] tpm: add more useful NV storage permission flags   sjg at google.com
• [U-Boot] [PATCH v2 3/5] tpm: add tpm_get_random()   sjg at google.com
• [U-Boot] [PATCH v2 1/5] SPL: fix printing of image name   sjg at google.com
• [U-Boot] [PATCH v2 2/5] tpm: fix reading of permanent flags   sjg at google.com
• [U-Boot] [PATCH] sandbox: Add clrbits/setbits macros   sjg at google.com
• [U-Boot] [PATCH] dm: core: Correct address cast in dev_read_addr_ptr()   sjg at google.com
• [U-Boot] [PATCH] cmd/fdt.c align data buffer to avoid unaligned word access   sjg at google.com
• [U-Boot] [PATCH 25/26] binman: Return non-zero exit code on test failure   sjg at google.com
• [U-Boot] [PATCH 24/26] binman: Add add test for using an Intel MRC binary   sjg at google.com
• [U-Boot] [PATCH 23/26] binman: Add add test for SPL with a microcode pointer   sjg at google.com
• [U-Boot] [PATCH 22/26] binman: Add a test for x86-start16-spl   sjg at google.com
• [U-Boot] [PATCH 20/26] binman: Check for files missing from test coverage   sjg at google.com
• [U-Boot] [PATCH 21/26] binman: Add test for u-boot-spl-bss-pad   sjg at google.com
• [U-Boot] [PATCH 19/26] binman: Increase test coverage back to 100%   sjg at google.com
• [U-Boot] [PATCH 18/26] binman: Add a main program to the tests   sjg at google.com
• [U-Boot] [PATCH 17/26] binman: Add tests for importlib availability   sjg at google.com
• [U-Boot] [PATCH 16/26] binman: Set up 'entry' to permit full test coverage   sjg at google.com
• [U-Boot] [PATCH 15/26] binman: Append to PYTHONPATH when running test coverage   sjg at google.com
• [U-Boot] [PATCH 13/26] dtoc: Fix up tests   sjg at google.com
• [U-Boot] [PATCH 11/26] buildman: Fix up tests   sjg at google.com
• [U-Boot] [PATCH 10/26] buildman: Allow skipping of tests which use the network   sjg at google.com
• [U-Boot] [PATCH 06/26] test/run: Report and return failure   sjg at google.com
• [U-Boot] [PATCH 08/26] patman: Fix up tests to pass with newest checkpatch   sjg at google.com
• [U-Boot] [PATCH 05/26] binman: Disable the no-unit_address_vs_reg warnings   sjg at google.com
• [U-Boot] [PATCH 04/26] binman: Rename tests to ftest   sjg at google.com
• [U-Boot] [PATCH 03/26] binman: Add a Makefile for test-program compilation   sjg at google.com
• [U-Boot] [PATCH 02/26] binman: Add docs explaining how to enable binman for a board   sjg at google.com
• [U-Boot] [PATCH 01/26] binman: Add better Makefile debugging   sjg at google.com
• [U-Boot] [PATCH 0/2] Creating generic file system firmware loader   tien.fong.chee at intel.com
• [U-Boot] [PATCH 1/2] common: Generic file system firmware loader   tien.fong.chee at intel.com
• [U-Boot] [PATCH 2/2] common: Convert splash FS loader to use generic FS firmware loader   tien.fong.chee at intel.com
• [U-Boot] UBI / UBIFS booting from NAND support   jsanabria
• [U-Boot] [PATCH] tools: Add Marvell recovery image download script   kostap at marvell.com
• [U-Boot] [PATCH] gpt: add part-uuid and part-num subcommands   your name
• [U-Boot] problem with configuration   pranav prakash
• [U-Boot] [PATCH 0/4] ARM: imx: cm_fx6: fix & clean up device model support   christopher.spinrath at rwth-aachen.de
• [U-Boot] [PATCH 1/4] ARM: imx: cm-fx6: reinstate USB support by syncing the devicetree with Linux   christopher.spinrath at rwth-aachen.de
• [U-Boot] [PATCH 2/4] ARM: imx: cm_fx6: defconfig: enable CONFIG_DM_KEYBOARD   christopher.spinrath at rwth-aachen.de
• [U-Boot] [PATCH 3/4] ARM: imx: cm_fx6: remove sata init code from board file   christopher.spinrath at rwth-aachen.de
• [U-Boot] [PATCH 4/4] ARM: imx: cm_fx6: remove esdhc init code from board file   christopher.spinrath at rwth-aachen.de
• [U-Boot] [PATCH] armv8: ls1046aqds: update IFC NOR timings   Wenbin song
• [U-Boot] [PATCH 1/2] armv8: ls1043a: modify the detecting way to cover all variants   Wenbin song
• [U-Boot] [PATCH 2/2] armv8: ls1043a: Discard the needless cpu nodes   Wenbin song
• [U-Boot] [PATCH] mach-stm32: Fix mpu region's attribute for STM32H7   patrice.chotard at st.com
• [U-Boot] [PATCH 00/11] Extend clk_stm32f7 driver   patrice.chotard at st.com
• [U-Boot] [PATCH 01/11] ARM: DTS: stm32: add pwrcfg node for stm32f746   patrice.chotard at st.com
• [U-Boot] [PATCH 02/11] clk: stm32f7: retrieve PWR base address from DT   patrice.chotard at st.com
• [U-Boot] [PATCH 03/11] clk: stm32f7: add dedicated STM32F7 compatible string   patrice.chotard at st.com
• [U-Boot] [PATCH 04/11] ARM: DTS: stm32: update rcc compatible for STM32F746   patrice.chotard at st.com
• [U-Boot] [PATCH 05/11] clk: stm32f7: add STM32F4 support   patrice.chotard at st.com
• [U-Boot] [PATCH 06/11] clk: stm32f7: rename clk_stm32f7.c to clk_stm32f.c   patrice.chotard at st.com
• [U-Boot] [PATCH 07/11] clk: stm32fx: migrate define from rcc.h to driver   patrice.chotard at st.com
• [U-Boot] [PATCH 08/11] configs: stm32f746-disco: enable MISC/DM_RESET/STM32_RESET and STM32_RCC   patrice.chotard at st.com
• [U-Boot] [PATCH 09/11] dm: misc: bind STM32F4/F7 clock from rcc MFD driver   patrice.chotard at st.com
• [U-Boot] [PATCH 10/11] clk: clk_stm32fx: add clock configuration for mmc usage   patrice.chotard at st.com
• [U-Boot] [PATCH 11/11] stm32: migrate clock structs in include/stm32_rcc.h   patrice.chotard at st.com
• [U-Boot] [PATCH] mach-stm32: Factorize MPU's region config for STM32 SoCs   patrice.chotard at st.com
• [U-Boot] [PATCH 0/2] Add clock support for designware net driver   patrice.chotard at st.com
• [U-Boot] [PATCH 1/2] dm: core: add missing dev_count_phandle_with_args()   patrice.chotard at st.com
• [U-Boot] [PATCH 2/2] net: designware: add clock support   patrice.chotard at st.com
• [U-Boot] [RESEND PATCH 0/2] Add clock support for designware net driver   patrice.chotard at st.com
• [U-Boot] [RESEND PATCH 1/2] dm: core: add missing dev_count_phandle_with_args()   patrice.chotard at st.com
• [U-Boot] [RESEND PATCH 2/2] net: designware: add clock support   patrice.chotard at st.com
• [U-Boot] [PATCH 00/14] Convert STM3F4 to DT and driver model   patrice.chotard at st.com
• [U-Boot] [PATCH 01/14] ARM: DTS: stm32: add STM32F429 SoC and its Discovery board support   patrice.chotard at st.com
• [U-Boot] [PATCH 02/14] ARM: DTS: stm32: add stm32f429-disco-u-boot dts file   patrice.chotard at st.com
• [U-Boot] [PATCH 03/14] board: stm32f429-discovery: switch to DM STM32 sdram driver   patrice.chotard at st.com
• [U-Boot] [PATCH 04/14] pinctrl: stm32: add stm32f4 pinctrl compatible strings   patrice.chotard at st.com
• [U-Boot] [PATCH 05/14] configs: stm32f429-disco: enable MISC, STM32_RCC, DM_RESET and STM32_RESET   patrice.chotard at st.com
• [U-Boot] [PATCH 06/14] board: stm32f429-disco: switch to DM STM32 serial driver   patrice.chotard at st.com
• [U-Boot] [PATCH 07/14] mach-stm32: stmf32f4: timer: remove clock_get() call   patrice.chotard at st.com
• [U-Boot] [PATCH 08/14] board: stm32f429-disco: switch to DM STM32 clock driver   patrice.chotard at st.com
• [U-Boot] [PATCH 09/14] board: stm32f429-disco: switch to DM STM32 pinctrl and gpio driver   patrice.chotard at st.com
• [U-Boot] [PATCH 10/14] ram: stm32: add memory mapping selection support   patrice.chotard at st.com
• [U-Boot] [PATCH 11/14] ARM: DTS: add STM32F469 Discovery board support   patrice.chotard at st.com
• [U-Boot] [PATCH 12/14] ARM: DTS: stm32: add stm32f469-disco-u-boot dts file   patrice.chotard at st.com
• [U-Boot] [PATCH 13/14] board: stm32: add stm32f469-discovery board support   patrice.chotard at st.com
• [U-Boot] [PATCH 14/14] ARM: DTS: stm32: add SDIO controller support for stm32f469-disco   patrice.chotard at st.com
• [U-Boot] Include FSP in u-boot.rom   vnktux
• [U-Boot] Include FSP in u-boot.rom   vnktux
• [U-Boot] Broadwell-DE porting code review   vnktux
• [U-Boot] [PATCH 1/1] Add Broadwell-DE arch   vnktux
• [U-Boot] password for u-boot   necib yassine