[U-Boot] [PATCH v2 04/11] tools: mkimage: Extend mkimage to also include pmufw

Michal Simek michal.simek at xilinx.com
Tue Nov 21 12:00:57 UTC 2017


The patch is adding external pmufw "Platform Management Unit firmware"
to boot.bin image. Boot.bin is a Xilinx format which bootrom is capable
to read and boot the system. pmufw is copied to the header data section
follows by u-boot-spl.bin. pmufw is consumed by PMU unit (Microblaze)
and SPL runs on a53-0.

This is generated command line when PMUFW_INIT_FILE is setup.

./tools/mkimage -T zynqmpimage -R ./"" -n
./"board/xilinx/zynqmp/pmufw.bin" -d spl/u-boot-spl.bin spl/boot.bin

Signed-off-by: Michal Simek <michal.simek at xilinx.com>
---

Changes in v2:
- Change commit message - reported by sjg
- Extend help in Kconfig - reported by sjg

 arch/arm/cpu/armv8/zynqmp/Kconfig |  8 ++++
 scripts/Makefile.spl              |  3 +-
 tools/zynqmpimage.c               | 99 ++++++++++++++++++++++++++++++++++++++-
 3 files changed, 108 insertions(+), 2 deletions(-)

diff --git a/arch/arm/cpu/armv8/zynqmp/Kconfig b/arch/arm/cpu/armv8/zynqmp/Kconfig
index 4dc8b1caf79e..7a415830752c 100644
--- a/arch/arm/cpu/armv8/zynqmp/Kconfig
+++ b/arch/arm/cpu/armv8/zynqmp/Kconfig
@@ -57,6 +57,14 @@ config BOOT_INIT_FILE
 	  Add register writes to boot.bin format (max 256 pairs).
 	  Expect a table of register-value pairs, e.g. "0x12345678 0x4321"
 
+config PMUFW_INIT_FILE
+	string "PMU firmware"
+	depends on SPL
+	default ""
+	help
+	  Include external PMUFW (Platform Management Unit FirmWare) to
+	  a Xilinx bootable image (boot.bin).
+
 config ZYNQMP_USB
 	bool "Configure ZynqMP USB"
 
diff --git a/scripts/Makefile.spl b/scripts/Makefile.spl
index ca044767a02c..b5e7019ea36a 100644
--- a/scripts/Makefile.spl
+++ b/scripts/Makefile.spl
@@ -167,7 +167,8 @@ ifdef CONFIG_ARCH_ZYNQ
 MKIMAGEFLAGS_boot.bin = -T zynqimage -R $(srctree)/$(CONFIG_BOOT_INIT_FILE)
 endif
 ifdef CONFIG_ARCH_ZYNQMP
-MKIMAGEFLAGS_boot.bin = -T zynqmpimage -R $(srctree)/$(CONFIG_BOOT_INIT_FILE)
+MKIMAGEFLAGS_boot.bin = -T zynqmpimage -R $(srctree)/$(CONFIG_BOOT_INIT_FILE) \
+	-n $(srctree)/$(CONFIG_PMUFW_INIT_FILE)
 endif
 
 spl/boot.bin: $(obj)/u-boot-spl.bin FORCE
diff --git a/tools/zynqmpimage.c b/tools/zynqmpimage.c
index 0c9a3daddd6a..74bd5f5ccc3f 100644
--- a/tools/zynqmpimage.c
+++ b/tools/zynqmpimage.c
@@ -99,6 +99,8 @@ struct zynqmp_header {
 };
 
 static struct zynqmp_header zynqmpimage_header;
+static void *dynamic_header;
+static FILE *fpmu;
 
 static uint32_t zynqmpimage_checksum(struct zynqmp_header *ptr)
 {
@@ -181,6 +183,13 @@ static void zynqmpimage_print_header(const void *ptr)
 	printf("Image Size   : %lu bytes (%lu bytes packed)\n",
 	       (unsigned long)le32_to_cpu(zynqhdr->image_size),
 	       (unsigned long)le32_to_cpu(zynqhdr->image_stored_size));
+
+	if (zynqhdr->pfw_image_length)
+		printf("PMUFW Size   : %lu bytes (%lu bytes packed)\n",
+		       (unsigned long)le32_to_cpu(zynqhdr->pfw_image_length),
+		       (unsigned long)le32_to_cpu(
+				zynqhdr->total_pfw_image_length));
+
 	printf("Image Load   : 0x%08x\n", le32_to_cpu(zynqhdr->image_load));
 	printf("Checksum     : 0x%08x\n", le32_to_cpu(zynqhdr->checksum));
 
@@ -203,6 +212,8 @@ static void zynqmpimage_print_header(const void *ptr)
 		       le32_to_cpu(zynqhdr->register_init[i].address),
 		       le32_to_cpu(zynqhdr->register_init[i].data));
 	}
+
+	free(dynamic_header);
 }
 
 static int zynqmpimage_check_params(struct image_tool_params *params)
@@ -234,6 +245,44 @@ static int zynqmpimage_check_image_types(uint8_t type)
 	return EXIT_FAILURE;
 }
 
+static int fsize(FILE *fp)
+{
+	int size;
+	int origin = ftell(fp);
+
+	fseek(fp, 0L, SEEK_END);
+	size = ftell(fp);
+
+	/* going back */
+	fseek(fp, origin, SEEK_SET);
+
+	return size;
+}
+
+static void zynqmpimage_pmufw(struct zynqmp_header *zynqhdr,
+			      const char *filename)
+{
+	uint32_t size;
+
+	/* Setup PMU fw size */
+	zynqhdr->pfw_image_length = fsize(fpmu);
+	zynqhdr->total_pfw_image_length = zynqhdr->pfw_image_length;
+
+	zynqhdr->image_size -= zynqhdr->pfw_image_length;
+	zynqhdr->image_stored_size -= zynqhdr->total_pfw_image_length;
+
+	/* Read the whole PMUFW to the header */
+	size = fread(&zynqhdr->__reserved4[66], 1,
+		     zynqhdr->pfw_image_length, fpmu);
+	if (size != zynqhdr->pfw_image_length) {
+		fprintf(stderr, "Cannot read PMUFW file: %s\n", filename);
+		fclose(fpmu);
+		exit(1);
+	}
+
+	fclose(fpmu);
+}
+
 static void zynqmpimage_parse_initparams(struct zynqmp_header *zynqhdr,
 	const char *filename)
 {
@@ -288,6 +337,10 @@ static void zynqmpimage_set_header(void *ptr, struct stat *sbuf, int ifd,
 	if (params->eflag)
 		zynqhdr->image_load = cpu_to_le32((uint32_t)params->ep);
 
+	/* PMUFW */
+	if (fpmu)
+		zynqmpimage_pmufw(zynqhdr, params->imagename);
+
 	/* User can pass in text file with init list */
 	if (strlen(params->imagename2))
 		zynqmpimage_parse_initparams(zynqhdr, params->imagename2);
@@ -295,6 +348,50 @@ static void zynqmpimage_set_header(void *ptr, struct stat *sbuf, int ifd,
 	zynqhdr->checksum = zynqmpimage_checksum(zynqhdr);
 }
 
+static int zynqmpimage_vrec_header(struct image_tool_params *params,
+				   struct image_type_params *tparams)
+{
+	struct stat path_stat;
+	char *filename = params->imagename;
+	int err;
+
+	/* Handle static case without PMUFW */
+	tparams->header_size = sizeof(struct zynqmp_header);
+	tparams->hdr = (void *)&zynqmpimage_header;
+
+	/* PMUFW name is passed via params->imagename */
+	if (strlen(filename) == 0)
+		return EXIT_SUCCESS;
+
+	fpmu = fopen(filename, "r");
+	if (!fpmu) {
+		fprintf(stderr, "Cannot open PMUFW file: %s\n", filename);
+		return EXIT_FAILURE;
+	}
+
+	err = fstat(fileno(fpmu), &path_stat);
+	if (err) {
+		fclose(fpmu);
+		fpmu = NULL;
+		return EXIT_FAILURE;
+	}
+
+	if (!S_ISREG(path_stat.st_mode)) {
+		fclose(fpmu);
+		fpmu = NULL;
+		return EXIT_FAILURE;
+	}
+
+	/* Increase header size by PMUFW file size */
+	tparams->header_size += fsize(fpmu);
+
+	/* Allocate buffer with space for PMUFW */
+	dynamic_header = calloc(1, tparams->header_size);
+	tparams->hdr = dynamic_header;
+
+	return EXIT_SUCCESS;
+}
+
 U_BOOT_IMAGE_TYPE(
 	zynqmpimage,
 	"Xilinx ZynqMP Boot Image support",
@@ -307,5 +404,5 @@ U_BOOT_IMAGE_TYPE(
 	NULL,
 	zynqmpimage_check_image_types,
 	NULL,
-	NULL
+	zynqmpimage_vrec_header
 );
-- 
1.9.1



More information about the U-Boot mailing list