[U-Boot] [PATCH 34/40] arm64: zynqmp: Enabled CCI support for USB

[Michal Simek]

From: Manish Narani <manish.narani at xilinx.com>

This patch adds CCI support for USB when CCI is enabled in design.
This patch also adds 'reg' property for Xilinx USB 3.0 IP. The 'reg'
property is added in order to modify a register in that to enable
coherency in Hardware.

Also add address to unit name to avoid dtc warning

Signed-off-by: Manish Narani <mnarani at xilinx.com>
Signed-off-by: Michal Simek <michal.simek at xilinx.com>
---

 arch/arm/dts/zynqmp.dtsi | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

diff --git a/arch/arm/dts/zynqmp.dtsi b/arch/arm/dts/zynqmp.dtsi
index dce5da4e06e5..7def14d95a88 100644
--- a/arch/arm/dts/zynqmp.dtsi
+++ b/arch/arm/dts/zynqmp.dtsi
@@ -1011,11 +1011,12 @@
 			power-domains = <&pd_uart1>;
 		};
 
-		usb0: usb0 {
+		usb0: usb0 at ff9d0000 {
 			#address-cells = <2>;
 			#size-cells = <2>;
 			status = "disabled";
 			compatible = "xlnx,zynqmp-dwc3";
+			reg = <0x0 0xff9d0000 0x0 0x100>;
 			clock-names = "bus_clk", "ref_clk";
 			clocks = <&clk125>, <&clk125>;
 			#stream-id-cells = <1>;
@@ -1033,14 +1034,16 @@
 				interrupts = <0 65 4>;
 				/* snps,quirk-frame-length-adjustment = <0x20>; */
 				snps,refclk_fladj;
+				/* dma-coherent; */
 			};
 		};
 
-		usb1: usb1 {
+		usb1: usb1 at ff9e0000 {
 			#address-cells = <2>;
 			#size-cells = <2>;
 			status = "disabled";
 			compatible = "xlnx,zynqmp-dwc3";
+			reg = <0x0 0xff9e0000 0x0 0x100>;
 			clock-names = "bus_clk", "ref_clk";
 			clocks = <&clk125>, <&clk125>;
 			#stream-id-cells = <1>;
@@ -1058,6 +1061,7 @@
 				interrupts = <0 70 4>;
 				/* snps,quirk-frame-length-adjustment = <0x20>; */
 				snps,refclk_fladj;
+				/* dma-coherent; */
 			};
 		};
 
-- 
1.9.1