[U-Boot] [U-Boot, v3, 1/3] rockchip: make boot_mode related codes reused across all platforms
Dr. Philipp Tomsich
philipp.tomsich at theobroma-systems.com
Tue Nov 21 08:25:52 UTC 2017
Andy,
> On 21 Nov 2017, at 01:48, Andy Yan <andy.yan at rock-chips.com> wrote:
>
> Hi Philipp:
>
>
> On 2017年11月20日 22:50, Philipp Tomsich wrote:
>>
>>
>> On Wed, 11 Oct 2017, Andy Yan wrote:
>>
>>> setup_boot_mode function use the same logic but different
>>> mode register address across all the rockchip platforms,
>>> so it's better to make this function reused across all the
>>> platforms, and let the mode register address setting from
>>> the config file.
>>>
>>> Signed-off-by: Andy Yan <andy.yan at rock-chips.com>
>>> Reviewed-by: Simon Glass <sjg at chromium.org>
>>> Acked-by: Philipp Tomsich <philipp.tomsich at theobroma-systems.com>
>>
>> Reviewed-by: Philipp Tomsich <philipp.tomsich at theobroma-systems.com>
>>
>> See below for a suggestion...
>>
>>> ---
>>>
>>> Changes in v3:
>>> - add support for rk3188
>>>
>>> Changes in v2:
>>> - correct the rk322x boot mode register address
>>> - make the help text more clear
>>>
>>> arch/arm/include/asm/arch-rockchip/boot_mode.h | 2 ++
>>> arch/arm/mach-rockchip/Kconfig | 15 ++++++++++++
>>> arch/arm/mach-rockchip/Makefile | 6 +++++
>>> arch/arm/mach-rockchip/boot_mode.c | 33 ++++++++++++++++++++++++++
>>> arch/arm/mach-rockchip/rk3036-board.c | 24 -------------------
>>> arch/arm/mach-rockchip/rk3188-board.c | 1 +
>>> arch/arm/mach-rockchip/rk322x-board.c | 24 -------------------
>>> arch/arm/mach-rockchip/rk3288-board.c | 25 -------------------
>>> arch/arm/mach-rockchip/rk3399-board.c | 14 +++++++++++
>>> 9 files changed, 71 insertions(+), 73 deletions(-)
>>> create mode 100644 arch/arm/mach-rockchip/boot_mode.c
>>> create mode 100644 arch/arm/mach-rockchip/rk3399-board.c
>>>
>>> diff --git a/arch/arm/include/asm/arch-rockchip/boot_mode.h b/arch/arm/include/asm/arch-rockchip/boot_mode.h
>>> index bd65f60..163b2e7 100644
>>> --- a/arch/arm/include/asm/arch-rockchip/boot_mode.h
>>> +++ b/arch/arm/include/asm/arch-rockchip/boot_mode.h
>>> @@ -16,4 +16,6 @@
>>> /* enter usb mass storage mode */
>>> #define BOOT_UMS (REBOOT_FLAG + 12)
>>>
>>> +int setup_boot_mode(void);
>>> +
>>> #endif
>>> diff --git a/arch/arm/mach-rockchip/Kconfig b/arch/arm/mach-rockchip/Kconfig
>>> index 36df484..6144057 100644
>>> --- a/arch/arm/mach-rockchip/Kconfig
>>> +++ b/arch/arm/mach-rockchip/Kconfig
>>> @@ -117,6 +117,7 @@ config ROCKCHIP_RK3399
>>> select SPL_SERIAL_SUPPORT
>>> select SPL_DRIVERS_MISC_SUPPORT
>>> select DEBUG_UART_BOARD_INIT
>>> + select BOARD_LATE_INIT
>>> help
>>> The Rockchip RK3399 is a ARM-based SoC with a dual-core Cortex-A72
>>> and quad-core Cortex-A53.
>>> @@ -152,6 +153,20 @@ config TPL_ROCKCHIP_BACK_TO_BROM
>>> SPL will return to the boot rom, which will then load the U-Boot
>>> binary to keep going on.
>>>
>>> +config ROCKCHIP_BOOT_MODE_REG
>>> + hex "Rockchip boot mode flag register address"
>>> + default 0x200081c8 if ROCKCHIP_RK3036
>>> + default 0x20004040 if ROCKCHIP_RK3188
>>> + default 0x110005c8 if ROCKCHIP_RK322X
>>> + default 0xff730094 if ROCKCHIP_RK3288
>>> + default 0xff738200 if ROCKCHIP_RK3368
>>> + default 0xff320300 if ROCKCHIP_RK3399
>>> + default 0x10300580 if ROCKCHIP_RV1108
>>> + default 0
>>> + help
>>> + The Soc will enter to different boot mode(defined in asm/arch/boot_mode.h)
>>> + according to the value from this register.
>>> +
>>> config ROCKCHIP_SPL_RESERVE_IRAM
>>> hex "Size of IRAM reserved in SPL"
>>> default 0x4000
>>> diff --git a/arch/arm/mach-rockchip/Makefile b/arch/arm/mach-rockchip/Makefile
>>> index c15e9bf..2127f2b 100644
>>> --- a/arch/arm/mach-rockchip/Makefile
>>> +++ b/arch/arm/mach-rockchip/Makefile
>>> @@ -22,10 +22,16 @@ obj-spl-$(CONFIG_ROCKCHIP_RK3368) += rk3368-board-spl.o spl-boot-order.o
>>> obj-spl-$(CONFIG_ROCKCHIP_RK3399) += rk3399-board-spl.o spl-boot-order.o
>>>
>>> ifeq ($(CONFIG_SPL_BUILD)$(CONFIG_TPL_BUILD),)
>>> +
>>> +ifneq ($(CONFIG_ROCKCHIP_BOOT_MODE_REG),0)
>>> +obj-y += boot_mode.o
>>> +endif
>>> +
>>> obj-$(CONFIG_ROCKCHIP_RK3188) += rk3188-board.o
>>> obj-$(CONFIG_ROCKCHIP_RK322X) += rk322x-board.o
>>> obj-$(CONFIG_ROCKCHIP_RK3288) += rk3288-board.o
>>> obj-$(CONFIG_ROCKCHIP_RK3036) += rk3036-board.o
>>> +obj-$(CONFIG_ROCKCHIP_RK3399) += rk3399-board.o
>>> endif
>>>
>>> obj-$(CONFIG_$(SPL_TPL_)RAM) += sdram_common.o
>>> diff --git a/arch/arm/mach-rockchip/boot_mode.c b/arch/arm/mach-rockchip/boot_mode.c
>>> new file mode 100644
>>> index 0000000..4652490
>>> --- /dev/null
>>> +++ b/arch/arm/mach-rockchip/boot_mode.c
>>> @@ -0,0 +1,33 @@
>>> +/*
>>> + * (C) Copyright 2016 Rockchip Electronics Co., Ltd
>>> + *
>>> + * SPDX-License-Identifier: GPL-2.0+
>>> + */
>>> +
>>> +#include <common.h>
>>> +#include <asm/io.h>
>>> +#include <asm/arch/boot_mode.h>
>>> +
>>> +int setup_boot_mode(void)
>>> +{
>>> + void *reg = (void *)CONFIG_ROCKCHIP_BOOT_MODE_REG;
>>
>> I am somewhat uneasy about this... could we use a syscon/regmap instead
>> that will map to something different on each device? I am thinking of something along the lines of "syscon_get_first_range(ROCKCHIP_BOOTMODE)".
>
>
> The reason why we put the BOOTMODE register in Kconfig is because that we also need to access the resister in function save_boot_params(see patch 2/3) to check
> the BROM_DNL flag, we have no way to access the dtb or syscon driver at that point(it's the first step we enter the tpl/spl world from bootrom).
Thanks for explaining.
I suspected something like that, but it wasn’t obvious on the first glance.
>>
>>> + int boot_mode = readl(reg);
>>> +
>>> + debug("boot mode %x.\n", boot_mode);
>>> +
>>> + /* Clear boot mode */
>>> + writel(BOOT_NORMAL, reg);
>>> +
>>> + switch (boot_mode) {
>>> + case BOOT_FASTBOOT:
>>> + printf("enter fastboot!\n");
>>> + env_set("preboot", "setenv preboot; fastboot usb0");
>>> + break;
>>> + case BOOT_UMS:
>>> + printf("enter UMS!\n");
>>> + env_set("preboot", "setenv preboot; ums mmc 0");
>>> + break;
>>> + }
>>> +
>>> + return 0;
>>> +}
>>> diff --git a/arch/arm/mach-rockchip/rk3036-board.c b/arch/arm/mach-rockchip/rk3036-board.c
>>> index a3457f3..a5d2571 100644
>>> --- a/arch/arm/mach-rockchip/rk3036-board.c
>>> +++ b/arch/arm/mach-rockchip/rk3036-board.c
>>> @@ -19,30 +19,6 @@
>>>
>>> DECLARE_GLOBAL_DATA_PTR;
>>>
>>> -#define GRF_BASE 0x20008000
>>> -
>>> -static void setup_boot_mode(void)
>>> -{
>>> - struct rk3036_grf *const grf = (void *)GRF_BASE;
>>> - int boot_mode = readl(&grf->os_reg[4]);
>>> -
>>> - debug("boot mode %x.\n", boot_mode);
>>> -
>>> - /* Clear boot mode */
>>> - writel(BOOT_NORMAL, &grf->os_reg[4]);
>>> -
>>> - switch (boot_mode) {
>>> - case BOOT_FASTBOOT:
>>> - printf("enter fastboot!\n");
>>> - env_set("preboot", "setenv preboot; fastboot usb0");
>>> - break;
>>> - case BOOT_UMS:
>>> - printf("enter UMS!\n");
>>> - env_set("preboot", "setenv preboot; ums mmc 0");
>>> - break;
>>> - }
>>> -}
>>> -
>>> __weak int rk_board_late_init(void)
>>> {
>>> return 0;
>>> diff --git a/arch/arm/mach-rockchip/rk3188-board.c b/arch/arm/mach-rockchip/rk3188-board.c
>>> index 96859a5..916d18f 100644
>>> --- a/arch/arm/mach-rockchip/rk3188-board.c
>>> +++ b/arch/arm/mach-rockchip/rk3188-board.c
>>> @@ -24,6 +24,7 @@ int board_late_init(void)
>>> {
>>> struct rk3188_grf *grf;
>>>
>>> + setup_boot_mode();
>>> grf = syscon_get_first_range(ROCKCHIP_SYSCON_GRF);
>>> if (IS_ERR(grf)) {
>>> pr_err("grf syscon returned %ld\n", PTR_ERR(grf));
>>> diff --git a/arch/arm/mach-rockchip/rk322x-board.c b/arch/arm/mach-rockchip/rk322x-board.c
>>> index d443114..e71847d 100644
>>> --- a/arch/arm/mach-rockchip/rk322x-board.c
>>> +++ b/arch/arm/mach-rockchip/rk322x-board.c
>>> @@ -16,30 +16,6 @@
>>>
>>> DECLARE_GLOBAL_DATA_PTR;
>>>
>>> -#define GRF_BASE 0x11000000
>>> -
>>> -static void setup_boot_mode(void)
>>> -{
>>> - struct rk322x_grf *const grf = (void *)GRF_BASE;
>>> - int boot_mode = readl(&grf->os_reg[0]);
>>> -
>>> - debug("boot mode %x.\n", boot_mode);
>>> -
>>> - /* Clear boot mode */
>>> - writel(BOOT_NORMAL, &grf->os_reg[0]);
>>> -
>>> - switch (boot_mode) {
>>> - case BOOT_FASTBOOT:
>>> - printf("enter fastboot!\n");
>>> - env_set("preboot", "setenv preboot; fastboot usb0");
>>> - break;
>>> - case BOOT_UMS:
>>> - printf("enter UMS!\n");
>>> - env_set("preboot", "setenv preboot; ums mmc 0");
>>> - break;
>>> - }
>>> -}
>>> -
>>> __weak int rk_board_late_init(void)
>>> {
>>> return 0;
>>> diff --git a/arch/arm/mach-rockchip/rk3288-board.c b/arch/arm/mach-rockchip/rk3288-board.c
>>> index 278bb40..1c53cca 100644
>>> --- a/arch/arm/mach-rockchip/rk3288-board.c
>>> +++ b/arch/arm/mach-rockchip/rk3288-board.c
>>> @@ -23,31 +23,6 @@
>>>
>>> DECLARE_GLOBAL_DATA_PTR;
>>>
>>> -#define PMU_BASE 0xff730000
>>> -
>>> -static void setup_boot_mode(void)
>>> -{
>>> - struct rk3288_pmu *const pmu = (void *)PMU_BASE;
>>> - int boot_mode = readl(&pmu->sys_reg[0]);
>>> -
>>> - debug("boot mode %x.\n", boot_mode);
>>> -
>>> - /* Clear boot mode */
>>> - writel(BOOT_NORMAL, &pmu->sys_reg[0]);
>>> -
>>> - switch (boot_mode) {
>>> - case BOOT_FASTBOOT:
>>> - printf("enter fastboot!\n");
>>> - env_set("preboot", "setenv preboot; fastboot usb0");
>>> - break;
>>> - case BOOT_UMS:
>>> - printf("enter UMS!\n");
>>> - env_set("preboot", "setenv preboot; if mmc dev 0;"
>>> - "then ums mmc 0; else ums mmc 1;fi");
>>> - break;
>>> - }
>>> -}
>>> -
>>> __weak int rk_board_late_init(void)
>>> {
>>> return 0;
>>> diff --git a/arch/arm/mach-rockchip/rk3399-board.c b/arch/arm/mach-rockchip/rk3399-board.c
>>> new file mode 100644
>>> index 0000000..9293843
>>> --- /dev/null
>>> +++ b/arch/arm/mach-rockchip/rk3399-board.c
>>> @@ -0,0 +1,14 @@
>>> +/*
>>> + * Copyright (c) 2017 Rockchip Electronics Co., Ltd
>>> + *
>>> + * SPDX-License-Identifier: GPL-2.0+
>>> + */
>>> +
>>> +#include <common.h>
>>> +#include <asm/arch/boot_mode.h>
>>> +
>>> +int board_late_init(void)
>>> +{
>>> + setup_boot_mode();
>>> + return 0;
>>> +}
>>>
>>
>>
>>
>
>
More information about the U-Boot
mailing list