[U-Boot] [PATCH 6/6] pico-imx6ul: Use FS_GENERIC load command

[Otavio Salvador]

From: Fabio Berton <fabio.berton at ossystems.com.br>

Signed-off-by: Fabio Berton <fabio.berton at ossystems.com.br>
Signed-off-by: Otavio Salvador <otavio at ossystems.com.br>
---

 include/configs/pico-imx6ul.h | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/include/configs/pico-imx6ul.h b/include/configs/pico-imx6ul.h
index b7469f8031..4a43515782 100644
--- a/include/configs/pico-imx6ul.h
+++ b/include/configs/pico-imx6ul.h
@@ -74,8 +74,8 @@
 	"setup_emmc=gpt write mmc 0 $partitions; reset;\0" \
 	"mmcargs=setenv bootargs console=${console},${baudrate} " \
 		"root=PARTUUID=${uuid} rootwait rw\0" \
-	"loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
-	"loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
+	"loadimage=load mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
+	"loadfdt=load mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
 	"mmcboot=echo Booting from mmc ...; " \
 		"run finduuid; " \
 		"run mmcargs; " \
-- 
2.15.0