[U-Boot] [U-Boot, 2/6] rockchip: dts: rk3399-puma: update usbhub_enable regulator

[Philipp Tomsich]

> To correctly model the usbhub_enable regulator for U-Boot, we need
> to change the settings to:
>  * the GPIO polarity is GPIO_ACTIVE_LOW
>  * should be set to inactive (enable-active-low) when boot-on settings
>    are applied
>  * it can be changed at runtime (i.e. remove the always-on)
> 
> Signed-off-by: Philipp Tomsich <philipp.tomsich at theobroma-systems.com>
> ---
> 
>  arch/arm/dts/rk3399-puma.dtsi | 3 +--
>  1 file changed, 1 insertion(+), 2 deletions(-)
> 

Applied to u-boot-rockchip, thanks!