[U-Boot] [PATCH 2/6] rockchip: dts: rk3399-puma: update usbhub_enable regulator

[Philipp Tomsich]

To correctly model the usbhub_enable regulator for U-Boot, we need
to change the settings to:
 * the GPIO polarity is GPIO_ACTIVE_LOW
 * should be set to inactive (enable-active-low) when boot-on settings
   are applied
 * it can be changed at runtime (i.e. remove the always-on)

Signed-off-by: Philipp Tomsich <philipp.tomsich at theobroma-systems.com>
---

 arch/arm/dts/rk3399-puma.dtsi | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/arch/arm/dts/rk3399-puma.dtsi b/arch/arm/dts/rk3399-puma.dtsi
index 19d0717..7fd4706 100644
--- a/arch/arm/dts/rk3399-puma.dtsi
+++ b/arch/arm/dts/rk3399-puma.dtsi
@@ -95,8 +95,7 @@
 		compatible = "regulator-fixed";
 		regulator-name = "usbhub_enable";
 		enable-active-low;
-		gpio = <&gpio4 3 GPIO_ACTIVE_HIGH>;
-		regulator-always-on;
+		gpio = <&gpio4 3 GPIO_ACTIVE_LOW>;
 		regulator-boot-on;
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
-- 
2.1.4