[U-Boot] [PATCH 00/23] imx: add i.MX8M support and i.MX8MQ EVK
Peng Fan
peng.fan at nxp.com
Wed Nov 29 05:31:27 UTC 2017
Hi Stefano,
> -----Original Message-----
> From: Stefano Babic [mailto:sbabic at denx.de]
> Sent: Tuesday, November 28, 2017 10:46 PM
> To: Peng Fan <peng.fan at nxp.com>; sbabic at denx.de; Fabio Estevam
> <fabio.estevam at nxp.com>
> Cc: u-boot at lists.denx.de; van.freenix at gmail.com
> Subject: Re: [PATCH 00/23] imx: add i.MX8M support and i.MX8MQ EVK
>
> Hi Peng,
>
> On 28/11/2017 13:31, Peng Fan wrote:
> > This patchset is to add i.MX8M and i.MX8MQ-EVK support
> >
>
> Thanks for sharing this.
>
> > patch: "power: pmic.h: include dm/ofnode.h" and
> > "power: pmic/regulator allow dm be omited by SPL" is previously
> > reviewed in mailist to not merged. Pick it up.
>
>
> Ok, I'll merge these two independently from the rest.
Thanks. I should say if no issue, you may pick it up. Then I'll not include these
two patches in V2.
>
>
> > The board support is a large patch because of the ddr related code.
> > If it is not good,
>
> You agree, it is not good. Anyway, I think one goal will be to have a platform like
> we have for i.MX6. Nowadays, it is easy and straightforward to add a new
> i.MX6 board. I set this goal for i.MX8, too.
i.MX8M is actually like i.MX6/7, it is different from i.MX8QM and else. You
could see there is no scu api in this patchset.
>
> >please first review/pick-up other patches if they are ok.
>
> I'll do it.
Thanks,
Peng.
>
> >
> > Peng Fan (23):
> > imx: add i.MX8M into Kconfig
> > imx: mx8m: add register definition header file
> > imx: mx8m: add pin header file
> > imx: mx8m: add clock driver
> > imx: add sip function
> > imx: boot_mode: add USB_BOOT entry
> > imx: cpu: update cpu file to support i.MX8M
> > imx: spl: implement spl_boot_device for i.MX8M
> > power: pmic.h: include dm/ofnode.h
> > imx: add i.MX8MQ SoC Revision and is_mx8m helper
> > imx: add pad settings bit definition for i.MX8M
> > imx: mx8m: add soc related settings and files
> > imx: makefile: compile files for i.MX8M
> > misc: ocotp: add i.MX8M support
> > mmc: fsl_esdhc: support i.MX8M
> > imx: lcdif: include i.MX8M
> > gpio: mxc: add i.MX8M support
> > imx: mx8m: add ddr register memory map
> > net: fec: do not access reserved register for i.MX8M
> > net: fec: fix build warnings for 64bits support
> > power: pmic/regulator allow dm be omitted by SPL
> > imx: imx8mq: add dtsi file
> > imx: add i.MX8MQ EVK support
> >
> > arch/arm/Kconfig | 8 +
> > arch/arm/Makefile | 4 +-
> > arch/arm/dts/Makefile | 2 +
> > arch/arm/dts/fsl-imx8-ca53.dtsi | 92 ++
> > arch/arm/dts/fsl-imx8mq-evk.dts | 597 ++++++++++
> > arch/arm/dts/fsl-imx8mq.dtsi | 961 ++++++++++++++++
> > arch/arm/include/asm/arch-imx/cpu.h | 6 +-
> > arch/arm/include/asm/arch-mx8m/clock.h | 864 +++++++++++++++
> > arch/arm/include/asm/arch-mx8m/crm_regs.h | 10 +
> > arch/arm/include/asm/arch-mx8m/ddr_memory_map.h | 496 +++++++++
> > arch/arm/include/asm/arch-mx8m/gpio.h | 12 +
> > arch/arm/include/asm/arch-mx8m/imx-regs.h | 298 +++++
> > arch/arm/include/asm/arch-mx8m/mx8mq_pins.h | 623 +++++++++++
> > arch/arm/include/asm/arch-mx8m/sys_proto.h | 17 +
> > arch/arm/include/asm/mach-imx/boot_mode.h | 1 +
> > arch/arm/include/asm/mach-imx/iomux-v3.h | 22 +-
> > arch/arm/include/asm/mach-imx/regs-lcdif.h | 11 +-
> > arch/arm/include/asm/mach-imx/sys_proto.h | 4 +
> > arch/arm/mach-imx/Makefile | 13 +-
> > arch/arm/mach-imx/cpu.c | 11 +-
> > arch/arm/mach-imx/mx8m/Kconfig | 22 +
> > arch/arm/mach-imx/mx8m/Makefile | 8 +
> > arch/arm/mach-imx/mx8m/clock.c | 782 +++++++++++++
> > arch/arm/mach-imx/mx8m/clock_slice.c | 820 ++++++++++++++
> > arch/arm/mach-imx/mx8m/lowlevel_init.S | 63 ++
> > arch/arm/mach-imx/mx8m/soc.c | 544 +++++++++
> > arch/arm/mach-imx/sip.c | 23 +
> > arch/arm/mach-imx/spl.c | 23 +-
> > board/freescale/mx8mq_evk/Kconfig | 12 +
> > board/freescale/mx8mq_evk/Makefile | 12 +
> > board/freescale/mx8mq_evk/ddr/ddr.h | 36 +
> > board/freescale/mx8mq_evk/ddr/ddr_init.c | 257 +++++
> > board/freescale/mx8mq_evk/ddr/ddrphy_train.c | 1154
> ++++++++++++++++++++
> > board/freescale/mx8mq_evk/ddr/helper.c | 102 ++
> > .../mx8mq_evk/ddr/wait_ddrphy_training_complete.c | 97 ++
> > board/freescale/mx8mq_evk/mx8mq_evk.c | 154 +++
> > board/freescale/mx8mq_evk/spl.c | 227 ++++
> > configs/mx8mq_evk_defconfig | 28 +
> > drivers/gpio/mxc_gpio.c | 22 +-
> > drivers/misc/mxc_ocotp.c | 7 +
> > drivers/mmc/fsl_esdhc.c | 12 +-
> > drivers/net/fec_mxc.c | 78 +-
> > drivers/power/pmic/Makefile | 4 +-
> > drivers/power/regulator/Makefile | 2 +-
> > include/configs/mx8mq_evk.h | 265 +++++
> > include/dt-bindings/clock/imx8mq-clock.h | 612 +++++++++++
> > include/dt-bindings/pinctrl/pins-imx8mq.h | 632 +++++++++++
> > include/power/pmic.h | 1 +
> > 48 files changed, 9992 insertions(+), 59 deletions(-) create mode
> > 100644 arch/arm/dts/fsl-imx8-ca53.dtsi create mode 100644
> > arch/arm/dts/fsl-imx8mq-evk.dts create mode 100644
> > arch/arm/dts/fsl-imx8mq.dtsi create mode 100644
> > arch/arm/include/asm/arch-mx8m/clock.h
> > create mode 100644 arch/arm/include/asm/arch-mx8m/crm_regs.h
> > create mode 100644 arch/arm/include/asm/arch-
> mx8m/ddr_memory_map.h
> > create mode 100644 arch/arm/include/asm/arch-mx8m/gpio.h
> > create mode 100644 arch/arm/include/asm/arch-mx8m/imx-regs.h
> > create mode 100755 arch/arm/include/asm/arch-mx8m/mx8mq_pins.h
> > create mode 100644 arch/arm/include/asm/arch-mx8m/sys_proto.h
> > create mode 100644 arch/arm/mach-imx/mx8m/Kconfig create mode
> 100644
> > arch/arm/mach-imx/mx8m/Makefile create mode 100644
> > arch/arm/mach-imx/mx8m/clock.c create mode 100644
> > arch/arm/mach-imx/mx8m/clock_slice.c
> > create mode 100644 arch/arm/mach-imx/mx8m/lowlevel_init.S
> > create mode 100644 arch/arm/mach-imx/mx8m/soc.c create mode 100644
> > arch/arm/mach-imx/sip.c create mode 100644
> > board/freescale/mx8mq_evk/Kconfig create mode 100644
> > board/freescale/mx8mq_evk/Makefile
> > create mode 100644 board/freescale/mx8mq_evk/ddr/ddr.h
> > create mode 100644 board/freescale/mx8mq_evk/ddr/ddr_init.c
> > create mode 100644 board/freescale/mx8mq_evk/ddr/ddrphy_train.c
> > create mode 100644 board/freescale/mx8mq_evk/ddr/helper.c
> > create mode 100644
> > board/freescale/mx8mq_evk/ddr/wait_ddrphy_training_complete.c
> > create mode 100644 board/freescale/mx8mq_evk/mx8mq_evk.c
> > create mode 100644 board/freescale/mx8mq_evk/spl.c create mode
> > 100644 configs/mx8mq_evk_defconfig create mode 100644
> > include/configs/mx8mq_evk.h create mode 100644
> > include/dt-bindings/clock/imx8mq-clock.h
> > create mode 100644 include/dt-bindings/pinctrl/pins-imx8mq.h
> >
>
> Best regards,
> Stefano
>
> --
> ============================================================
> =========
> DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
> HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
> Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
> ============================================================
> =========
More information about the U-Boot
mailing list