[U-Boot] [GIT PULL] Please pull u-boot-mmc master

[Jaehoon Chung]

Dear Tom,

Could you pull these patches to u-boot/master?
After applied these patches, i will send the patches relevant to fixing patches.

Note:
- When run "mmc rescan", it is failed with timeout.
- Need to fix the minor issues.
- Need to test about HS200 and UHS mode.
- Before releasing, needs to make the stable for HS200 and UHS mode.
- If there are that i missed some patches, i will rebase on this version.

The following changes since commit 93a51d301ad051ec6f8c6016862c7719b8b434d3:

  Merge git://git.denx.de/u-boot-arc (2017-11-24 11:45:15 -0500)

are available in the git repository at:

  git://git.denx.de/u-boot-mmc.git master

for you to fetch changes up to 48e4a0a6dd7d4e97dd66353d40932049716a106b:

  dm: mmc: Add a library function to parse generic dt binding (2017-11-27 15:51:17 +0900)

----------------------------------------------------------------
Felix Brack (1):
      mmc: sanitize includes for DM i2c

Heinrich Schuchardt (1):
      mmc: sdhci: do not compare pointer to 0

Jean-Jacques Hiblot (17):
      mmc: dm: get the IO-line and main voltage regulators from the dts
      mmc: split mmc_startup()
      mmc: move the MMC startup for version above v4.0 in a separate function
      mmc: make ext_csd part of struct mmc
      mmc: add a function to read and test the ext csd (mmc >= 4)
      mmc: introduce mmc modes
      mmc: Add a function to dump the mmc capabilities
      mmc: use mmc modes to select the correct bus speed
      cmd: mmc: display the mode name and current bus speed in the mmc info
      mmc: refactor SD startup to make it easier to support new modes
      mmc: refactor MMC startup to make it easier to support new modes
      mmc: Add a new callback function to perform the 74 clocks cycle sequence
      mmc: Add support for UHS modes
      mmc: disable UHS modes if Vcc cannot be switched on and off
      mmc: Change mode when switching to a boot partition
      mmc: use the right voltage level for MMC DDR and HS200 modes
      mmc: add a library function to send tuning command

Jorge Ramirez-Ortiz (1):
      mmc: sdhci: don't clear SDHCI_INT_STATUS register during CMD_INHIBIT

Kishon Vijay Abraham I (9):
      mmc: make mmc_set_ios() return status
      mmc: Enable signal voltage to be selected from mmc core
      mmc: add power cyle support in mmc core
      mmc: add a new mmc parameter to disable mmc clock
      mmc: disable the mmc clock during power off
      mmc: Add a execute_tuning() callback to the mmc operations.
      mmc: add HS200 support in MMC core
      mmc: Retry some MMC cmds on failure
      dm: mmc: Add a library function to parse generic dt binding

Suniel Mahesh (2):
      drivers: mmc: Change buffer type in ALLOC_CACHE_ALIGN_BUFFER macro
      drivers: mmc: Avoid memory leak in case of failure

 cmd/mmc.c                   |    3 +-
 drivers/mmc/Kconfig         |   23 +
 drivers/mmc/exynos_dw_mmc.c |    3 +
 drivers/mmc/fsl_esdhc.c     |    2 +-
 drivers/mmc/mmc-uclass.c    |   87 +++
 drivers/mmc/mmc.c           | 1517 ++++++++++++++++++++++++++++++++-----------
 drivers/mmc/omap_hsmmc.c    |    4 +-
 drivers/mmc/sdhci.c         |    7 +-
 include/mmc.h               |  176 ++++-
 9 files changed, 1429 insertions(+), 393 deletions(-)

Best Regards,
Jaehoon Chung