[U-Boot] [GIT PULL] Please pull u-boot-mmc master

[Jaehoon Chung]

On 11/27/2017 04:58 PM, Jaehoon Chung wrote:
> Dear Tom,
> 
> Could you pull these patches to u-boot/master?
> After applied these patches, i will send the patches relevant to fixing patches.

Sorry. Will resend the PR. Discard this PR.

> 
> Note:
> - When run "mmc rescan", it is failed with timeout.
> - Need to fix the minor issues.
> - Need to test about HS200 and UHS mode.
> - Before releasing, needs to make the stable for HS200 and UHS mode.
> - If there are that i missed some patches, i will rebase on this version.
> 
> The following changes since commit 93a51d301ad051ec6f8c6016862c7719b8b434d3:
> 
>   Merge git://git.denx.de/u-boot-arc (2017-11-24 11:45:15 -0500)
> 
> are available in the git repository at:
> 
>   git://git.denx.de/u-boot-mmc.git master
> 
> for you to fetch changes up to 48e4a0a6dd7d4e97dd66353d40932049716a106b:
> 
>   dm: mmc: Add a library function to parse generic dt binding (2017-11-27 15:51:17 +0900)
> 
> ----------------------------------------------------------------
> Felix Brack (1):
>       mmc: sanitize includes for DM i2c
> 
> Heinrich Schuchardt (1):
>       mmc: sdhci: do not compare pointer to 0
> 
> Jean-Jacques Hiblot (17):
>       mmc: dm: get the IO-line and main voltage regulators from the dts
>       mmc: split mmc_startup()
>       mmc: move the MMC startup for version above v4.0 in a separate function
>       mmc: make ext_csd part of struct mmc
>       mmc: add a function to read and test the ext csd (mmc >= 4)
>       mmc: introduce mmc modes
>       mmc: Add a function to dump the mmc capabilities
>       mmc: use mmc modes to select the correct bus speed
>       cmd: mmc: display the mode name and current bus speed in the mmc info
>       mmc: refactor SD startup to make it easier to support new modes
>       mmc: refactor MMC startup to make it easier to support new modes
>       mmc: Add a new callback function to perform the 74 clocks cycle sequence
>       mmc: Add support for UHS modes
>       mmc: disable UHS modes if Vcc cannot be switched on and off
>       mmc: Change mode when switching to a boot partition
>       mmc: use the right voltage level for MMC DDR and HS200 modes
>       mmc: add a library function to send tuning command
> 
> Jorge Ramirez-Ortiz (1):
>       mmc: sdhci: don't clear SDHCI_INT_STATUS register during CMD_INHIBIT
> 
> Kishon Vijay Abraham I (9):
>       mmc: make mmc_set_ios() return status
>       mmc: Enable signal voltage to be selected from mmc core
>       mmc: add power cyle support in mmc core
>       mmc: add a new mmc parameter to disable mmc clock
>       mmc: disable the mmc clock during power off
>       mmc: Add a execute_tuning() callback to the mmc operations.
>       mmc: add HS200 support in MMC core
>       mmc: Retry some MMC cmds on failure
>       dm: mmc: Add a library function to parse generic dt binding
> 
> Suniel Mahesh (2):
>       drivers: mmc: Change buffer type in ALLOC_CACHE_ALIGN_BUFFER macro
>       drivers: mmc: Avoid memory leak in case of failure
> 
>  cmd/mmc.c                   |    3 +-
>  drivers/mmc/Kconfig         |   23 +
>  drivers/mmc/exynos_dw_mmc.c |    3 +
>  drivers/mmc/fsl_esdhc.c     |    2 +-
>  drivers/mmc/mmc-uclass.c    |   87 +++
>  drivers/mmc/mmc.c           | 1517 ++++++++++++++++++++++++++++++++-----------
>  drivers/mmc/omap_hsmmc.c    |    4 +-
>  drivers/mmc/sdhci.c         |    7 +-
>  include/mmc.h               |  176 ++++-
>  9 files changed, 1429 insertions(+), 393 deletions(-)
> 
> Best Regards,
> Jaehoon Chung
> _______________________________________________
> U-Boot mailing list
> U-Boot at lists.denx.de
> https://lists.denx.de/listinfo/u-boot
>