[U-Boot] [PULL] u-boot-sh/rmobile-mx

[Marek Vasut]

The following changes since commit b06c46de632c55f4c39d404c6f0f65e414b31050:

  Merge tag 'xilinx-for-v2018.01' of
git://www.denx.de/git/u-boot-microblaze (2017-11-29 08:26:07 -0500)

are available in the Git repository at:

  git://git.denx.de/u-boot-sh.git rmobile-mx

for you to fetch changes up to ab61e175713a0400c6ece6348e8f655998cf574d:

  ARM: rmobile: Rework the ULCB CPLD driver (2017-11-30 08:54:18 +0100)

----------------------------------------------------------------
Marek Vasut (34):
      MAINTAINERS: Add myself as RCar/RMobile comaintainer
      fdtdec: Support parsing multiple /memory nodes
      clk: rmobile: Move preboot clock shutdown to the driver
      clk: rmobile: Add R8A7796 xHCI clock
      serial: sh: Unify R8A7795 and R8A7796 as Gen3
      i2c: rcar_iic: Add RCar IIC driver
      net: ravb: Fix reset GPIO handling
      ARM: rmobile: Fix eMMC signal voltage on ULCB
      ARM: rmobile: Enable Micrel KSZ90x1 PHY driver on ULCB
      ARM: rmobile: Drop CONFIG_USB_MAX_CONTROLLER_COUNT on Gen3 boards
      ARM: rmobile: Drop SDHI address macros from Gen3
      ARM: rmobile: Remove CONFIG_CMD_SDRAM from Salvator-X
      ARM: rmobile: Clean up GIC macros
      ARM: rmobile: Enable xHCI on RCar Gen3 boards
      ARM: rmobile: Zap Gen3 PFC tables
      ARM: rmobile: Stop using rcar-common/common.c on Gen3
      ARM: rmobile: Dispose of r8a779x.h for Gen3
      ARM: rmobile: Add PRR CPU ID macros
      ARM: rmobile: Unify memory map for RCar Gen3
      ARM: rmobile: Unify R8A7795 and R8A7796 in rmobile Makefile
      ARM: rmobile: Drop CPU type ifdef from salvator-x
      ARM: rmobile: Zap checkboard on Gen3
      ARM: rmobile: Zap rmobile_sysinfo on Gen3
      ARM: rmobile: Configure DRAM sizes from DT
      ARM: rmobile: Zap ad-hoc DRAM configuration macros


      ARM: rmobile: Clean up ad-hoc clock macros


      ARM: rmobile: Remove SCIF configs


      ARM: rmobile: Convert PRR to DM and OF control


      ARM: rmobile: Use PRR driver on all Gen3 boards


      ARM: rmobile: Migrate boards to RCar IIC drivers


      pinctrl: rmobile: Add support for setting single pins


      pfc: rmobile: Add hook to configure pin as GPIO


      gpio: rmobile: Set GPIO mode in GPSR when requested


      ARM: rmobile: Rework the ULCB CPLD driver





 MAINTAINERS                                         |    1 +


 arch/arm/dts/r8a7795.dtsi                           |    1 +


 arch/arm/dts/r8a7796.dtsi                           |    1 +


 arch/arm/dts/ulcb.dtsi                              |   15 +-


 arch/arm/mach-rmobile/Makefile                      |    3 +-
 arch/arm/mach-rmobile/board.c                       |    2 +
 arch/arm/mach-rmobile/cpu_info-rcar.c               |   61 +-
 arch/arm/mach-rmobile/cpu_info.c                    |   21 +-
 arch/arm/mach-rmobile/include/mach/gpio.h           |    6 -
 arch/arm/mach-rmobile/include/mach/r8a7795-gpio.h   | 1016
--------------------------
 arch/arm/mach-rmobile/include/mach/r8a7795.h        |   36 -
 arch/arm/mach-rmobile/include/mach/r8a7796-gpio.h   | 1084
----------------------------
 arch/arm/mach-rmobile/include/mach/r8a7796.h        |   36 -
 arch/arm/mach-rmobile/include/mach/rcar-gen3-base.h |    6 -
 arch/arm/mach-rmobile/include/mach/rmobile.h        |   18 +-
 arch/arm/mach-rmobile/memmap-gen3.c                 |   66 ++
 arch/arm/mach-rmobile/memmap-r8a7795.c              |   30 -
 arch/arm/mach-rmobile/memmap-r8a7796.c              |   30 -
 arch/arm/mach-rmobile/pfc-r8a7795.c                 | 5005
-------------------------------------------------------------------------------------------------------------------------------
 arch/arm/mach-rmobile/pfc-r8a7796.c                 | 5253
--------------------------------------------------------------------------------------------------------------------------------------
 board/renesas/salvator-x/Makefile                   |    2 +-
 board/renesas/salvator-x/salvator-x.c               |   48 +-
 board/renesas/ulcb/Makefile                         |    2 +-
 board/renesas/ulcb/cpld.c                           |  212 +++---
 board/renesas/ulcb/ulcb.c                           |   32 +-
 configs/r8a7795_salvator-x_defconfig                |    7 +-
 configs/r8a7795_ulcb_defconfig                      |    9 +
 configs/r8a7796_salvator-x_defconfig                |    7 +-
 configs/r8a7796_ulcb_defconfig                      |    9 +
 drivers/clk/renesas/clk-rcar-gen3.c                 |   60 ++
 drivers/gpio/gpio-rcar.c                            |   20 +-
 drivers/i2c/Kconfig                                 |    6 +
 drivers/i2c/Makefile                                |    1 +
 drivers/i2c/rcar_iic.c                              |  271 +++++++
 drivers/net/ravb.c                                  |    7 +-
 drivers/pinctrl/renesas/pfc.c                       |   60 ++
 drivers/pinctrl/renesas/sh_pfc.h                    |    1 +
 drivers/serial/serial_sh.h                          |    3 +-
 include/configs/rcar-gen3-common.h                  |   29 +-
 include/configs/salvator-x.h                        |   54 +-
 include/configs/ulcb.h                              |   76 +-
 lib/fdtdec.c                                        |   24 +-
 scripts/config_whitelist.txt                        |    3 -
 43 files changed, 787 insertions(+), 12847 deletions(-)
 delete mode 100644 arch/arm/mach-rmobile/include/mach/r8a7795-gpio.h
 delete mode 100644 arch/arm/mach-rmobile/include/mach/r8a7795.h
 delete mode 100644 arch/arm/mach-rmobile/include/mach/r8a7796-gpio.h
 delete mode 100644 arch/arm/mach-rmobile/include/mach/r8a7796.h
 create mode 100644 arch/arm/mach-rmobile/memmap-gen3.c
 delete mode 100644 arch/arm/mach-rmobile/memmap-r8a7795.c
 delete mode 100644 arch/arm/mach-rmobile/memmap-r8a7796.c
 delete mode 100644 arch/arm/mach-rmobile/pfc-r8a7795.c
 delete mode 100644 arch/arm/mach-rmobile/pfc-r8a7796.c
 create mode 100644 drivers/i2c/rcar_iic.c