[U-Boot] [PATCH 1/2] rk3288: tinker: Add TPL support

[Jagan Teki]

Since the size of SPL can't be exceeded 0x8000 bytes in RK3288,
it is not possible add new SPL features like Falcon mode or etc.

So add TPL stage so-that adding new features to SPL is possible.
- TPL: DRAM init, clocks
- SPL: MMC, falcon, etc

Signed-off-by: Jagan Teki <jagan at amarulasolutions.com>
---
 arch/arm/mach-rockchip/rk3288/Kconfig | 16 ++++++++++++++++
 configs/tinker-rk3288_defconfig       |  4 +++-
 2 files changed, 19 insertions(+), 1 deletion(-)

diff --git a/arch/arm/mach-rockchip/rk3288/Kconfig b/arch/arm/mach-rockchip/rk3288/Kconfig
index 6beb26f..0b6df17 100644
--- a/arch/arm/mach-rockchip/rk3288/Kconfig
+++ b/arch/arm/mach-rockchip/rk3288/Kconfig
@@ -121,6 +121,22 @@ config TARGET_ROCK2
 config TARGET_TINKER_RK3288
 	bool "Tinker-RK3288"
         select BOARD_LATE_INIT
+	select TPL
+	select SUPPORT_TPL
+	select TPL_DM
+	select TPL_REGMAP
+	select TPL_SYSCON
+	select TPL_CLK
+	select TPL_RAM
+	select TPL_OF_PLATDATA
+	select TPL_OF_CONTROL
+	select TPL_BOOTROM_SUPPORT
+	select TPL_NEEDS_SEPARATE_TEXT_BASE if SPL
+	select ROCKCHIP_BROM_HELPER
+	select TPL_DRIVERS_MISC_SUPPORT
+	select TPL_LIBCOMMON_SUPPORT
+	select TPL_LIBGENERIC_SUPPORT
+	select TPL_SERIAL_SUPPORT
 	help
 	  Tinker is a RK3288-based development board with 2 USB ports, HDMI,
 	  micro-SD card, audio, Gigabit Ethernet. It also includes on-board
diff --git a/configs/tinker-rk3288_defconfig b/configs/tinker-rk3288_defconfig
index 1315be3..e6bd4f3 100644
--- a/configs/tinker-rk3288_defconfig
+++ b/configs/tinker-rk3288_defconfig
@@ -1,9 +1,11 @@
+# CONFIG_SPL_USE_ARCH_MEMCPY is not set
+# CONFIG_SPL_USE_ARCH_MEMSET is not set
 CONFIG_ARM=y
 CONFIG_ARCH_ROCKCHIP=y
 CONFIG_SYS_MALLOC_F_LEN=0x2000
 CONFIG_ROCKCHIP_RK3288=y
-CONFIG_SPL_ROCKCHIP_BACK_TO_BROM=y
 CONFIG_TARGET_TINKER_RK3288=y
+CONFIG_TPL_TEXT_BASE=0xff704004
 CONFIG_SPL_STACK_R_ADDR=0x80000
 CONFIG_DEFAULT_DEVICE_TREE="rk3288-tinker"
 CONFIG_DEBUG_UART=y
-- 
2.7.4