[U-Boot] [PATCH 2/2] rk3288: tinker: Add falcon mode support
Jagan Teki
jagannadh.teki at gmail.com
Fri Nov 3 20:10:07 UTC 2017
Add Falcon mode support in tinker rk3288 board.
Signed-off-by: Jagan Teki <jagan at amarulasolutions.com>
---
Note:
This patch[1] need to work falcon
[1] https://patchwork.ozlabs.org/patch/833821/
board/rockchip/tinker_rk3288/tinker-rk3288.c | 13 +++++++++++++
include/configs/tinker_rk3288.h | 16 ++++++++++++++++
2 files changed, 29 insertions(+)
diff --git a/board/rockchip/tinker_rk3288/tinker-rk3288.c b/board/rockchip/tinker_rk3288/tinker-rk3288.c
index 790a921..48e0c41 100644
--- a/board/rockchip/tinker_rk3288/tinker-rk3288.c
+++ b/board/rockchip/tinker_rk3288/tinker-rk3288.c
@@ -9,6 +9,19 @@
#include <i2c_eeprom.h>
#include <netdev.h>
+#ifndef CONFIG_TPL_BUILD
+#include <spl.h>
+
+int spl_start_uboot(void)
+{
+ /* break into full u-boot on 'c' */
+ if (serial_tstc() && serial_getc() == 'c')
+ return 1;
+
+ return 0;
+}
+#endif
+
static int get_ethaddr_from_eeprom(u8 *addr)
{
int ret;
diff --git a/include/configs/tinker_rk3288.h b/include/configs/tinker_rk3288.h
index 58eea3c..6d4f271 100644
--- a/include/configs/tinker_rk3288.h
+++ b/include/configs/tinker_rk3288.h
@@ -20,4 +20,20 @@
#define CONFIG_SYS_MMC_ENV_DEV 1
+#ifndef CONFIG_TPL_BUILD
+#define CONFIG_SPL_OS_BOOT
+
+/* Falcon Mode */
+#define CONFIG_SPL_FS_LOAD_ARGS_NAME "args"
+#define CONFIG_SPL_FS_LOAD_KERNEL_NAME "uImage"
+#define CONFIG_CMD_SPL
+#define CONFIG_SYS_SPL_ARGS_ADDR 0x0ffe5000
+#define CONFIG_CMD_SPL_WRITE_SIZE (128 * SZ_1K)
+
+/* Falcon Mode - MMC support: args at 1MB kernel at 2MB */
+#define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR 0x800 /* 1MB */
+#define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS (CONFIG_CMD_SPL_WRITE_SIZE / 512)
+#define CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR 0x1000 /* 2MB */
+#endif
+
#endif
--
2.7.4
More information about the U-Boot
mailing list