[U-Boot] [PATCH] sunxi: lower the DRAM frequency of Nano Pi NEO2 to 504MHz

Icenowy Zheng icenowy at aosc.io
Thu Nov 2 08:27:51 UTC 2017


在 2017-11-02 16:25,Jagan Teki 写道:
> On Thu, Nov 2, 2017 at 9:06 AM, Icenowy Zheng <icenowy at aosc.io> wrote:
>> The BSP of Nano Pi NEO2 provided by FriendlyARM uses 504MHz DRAM
>> frequency, which is much lower than the current 672MHz used in
>> mainline.
>> 
>> Switch to use the BSP-provided frequency 504MHz for DRAM.
>> 
>> Thanks to Thomas Kaiser, who pointed out the frequency problem.
>> 
>> Signed-off-by: Icenowy Zheng <icenowy at aosc.io>
>> ---
>>  configs/nanopi_neo2_defconfig | 2 +-
>>  1 file changed, 1 insertion(+), 1 deletion(-)
>> 
>> diff --git a/configs/nanopi_neo2_defconfig 
>> b/configs/nanopi_neo2_defconfig
>> index b8e089176f..e210af4f0e 100644
>> --- a/configs/nanopi_neo2_defconfig
>> +++ b/configs/nanopi_neo2_defconfig
>> @@ -1,7 +1,7 @@
>>  CONFIG_ARM=y
>>  CONFIG_ARCH_SUNXI=y
>>  CONFIG_MACH_SUN50I_H5=y
>> -CONFIG_DRAM_CLK=672
>> +CONFIG_DRAM_CLK=504
> 
> Can you point me the BSP, here what I refer to have [1]

The file at [1] is just from mainline.

The BSP configuration is at [2].

[2] 
https://github.com/friendlyarm/h5_lichee/blob/master/tools/pack/chips/sun50iw2p1/configs/cheetah-p1/board/sys_config_nanopi-neo2.fex

> 
> [1]
> https://github.com/friendlyarm/u-boot/blob/sunxi-v2017.x/configs/nanopi_neo2_defconfig
> 
> thanks!


More information about the U-Boot mailing list