[U-Boot] [PATCH 07/16] configs: Add network device support for bx50v3 products
Martyn Welch
martyn.welch at collabora.co.uk
Wed Nov 8 15:59:41 UTC 2017
From: Ian Ray <ian.ray at ge.com>
Modify b450v3, b650v3 and b850v3 defconfigs to enable the network devices
found in these products.
Signed-off-by: Ian Ray <ian.ray at ge.com>
Signed-off-by: Martyn Welch <martyn.welch at collabora.co.uk>
---
configs/ge_b450v3_defconfig | 6 +++++-
configs/ge_b650v3_defconfig | 6 +++++-
configs/ge_b850v3_defconfig | 6 +++++-
include/configs/ge_bx50v3.h | 4 ++--
4 files changed, 17 insertions(+), 5 deletions(-)
diff --git a/configs/ge_b450v3_defconfig b/configs/ge_b450v3_defconfig
index 43a6c12..f95c3cd 100644
--- a/configs/ge_b450v3_defconfig
+++ b/configs/ge_b450v3_defconfig
@@ -15,7 +15,6 @@ CONFIG_CMD_GPIO=y
CONFIG_CMD_I2C=y
CONFIG_CMD_MMC=y
CONFIG_CMD_SF=y
-# CONFIG_CMD_NET is not set
# CONFIG_CMD_NFS is not set
CONFIG_CMD_CACHE=y
CONFIG_CMD_EXT2=y
@@ -28,3 +27,8 @@ CONFIG_SPI_FLASH=y
CONFIG_SPI_FLASH_STMICRO=y
CONFIG_OF_LIBFDT=y
# CONFIG_EFI_LOADER is not set
+CONFIG_NETDEVICES=y
+CONFIG_CMD_NET=y
+CONFIG_CMD_PCI=y
+CONFIG_E1000=y
+CONFIG_CMD_E1000=y
diff --git a/configs/ge_b650v3_defconfig b/configs/ge_b650v3_defconfig
index 4e22e95..3af0630 100644
--- a/configs/ge_b650v3_defconfig
+++ b/configs/ge_b650v3_defconfig
@@ -15,7 +15,6 @@ CONFIG_CMD_GPIO=y
CONFIG_CMD_I2C=y
CONFIG_CMD_MMC=y
CONFIG_CMD_SF=y
-# CONFIG_CMD_NET is not set
# CONFIG_CMD_NFS is not set
CONFIG_CMD_CACHE=y
CONFIG_CMD_EXT2=y
@@ -28,3 +27,8 @@ CONFIG_SPI_FLASH=y
CONFIG_SPI_FLASH_STMICRO=y
CONFIG_OF_LIBFDT=y
# CONFIG_EFI_LOADER is not set
+CONFIG_NETDEVICES=y
+CONFIG_CMD_NET=y
+CONFIG_CMD_PCI=y
+CONFIG_E1000=y
+CONFIG_CMD_E1000=y
diff --git a/configs/ge_b850v3_defconfig b/configs/ge_b850v3_defconfig
index cb5899d..5f008ea 100644
--- a/configs/ge_b850v3_defconfig
+++ b/configs/ge_b850v3_defconfig
@@ -15,7 +15,6 @@ CONFIG_CMD_GPIO=y
CONFIG_CMD_I2C=y
CONFIG_CMD_MMC=y
CONFIG_CMD_SF=y
-# CONFIG_CMD_NET is not set
# CONFIG_CMD_NFS is not set
CONFIG_CMD_CACHE=y
CONFIG_CMD_EXT2=y
@@ -28,3 +27,8 @@ CONFIG_SPI_FLASH=y
CONFIG_SPI_FLASH_STMICRO=y
CONFIG_OF_LIBFDT=y
# CONFIG_EFI_LOADER is not set
+CONFIG_NETDEVICES=y
+CONFIG_CMD_NET=y
+CONFIG_CMD_PCI=y
+CONFIG_E1000=y
+CONFIG_CMD_E1000=y
diff --git a/include/configs/ge_bx50v3.h b/include/configs/ge_bx50v3.h
index eb8f923..4526d2f 100644
--- a/include/configs/ge_bx50v3.h
+++ b/include/configs/ge_bx50v3.h
@@ -284,12 +284,12 @@
#define CONFIG_PWM_IMX
#define CONFIG_IMX6_PWM_PER_CLK 66000000
-#ifdef CONFIG_CMD_PCI
+#define CONFIG_PCI
+#define CONFIG_PCI_PNP
#define CONFIG_PCI_SCAN_SHOW
#define CONFIG_PCIE_IMX
#define CONFIG_PCIE_IMX_PERST_GPIO IMX_GPIO_NR(7, 12)
#define CONFIG_PCIE_IMX_POWER_GPIO IMX_GPIO_NR(1, 5)
-#endif
/* I2C Configs */
#define CONFIG_SYS_I2C
--
2.1.4
More information about the U-Boot
mailing list