[U-Boot] [PATCH 06/16] board: ge: Enable access to i2c bus 1 and 2

[Martyn Welch]

The change in i2c configuration added to support access to the VPD has
inadvertantly caused access to i2c buses 1 & 2 to be lost. This has
resulted in the configuration for the PMIC to be attempted on the wrong
bus and thus isn't taking effect.

Add the required configuration to return access to buses 1 & 2. In order
to ensure that any users of the bus numbering prior to addition in VPD
patches work, add buses before configuration related to mux on bus 0 and
tweak VPD bus usage to fit new numbering scheme.

Signed-off-by: Martyn Welch <martyn.welch at collabora.co.uk>
---
 board/ge/bx50v3/bx50v3.c    | 2 +-
 include/configs/ge_bx50v3.h | 4 +++-
 2 files changed, 4 insertions(+), 2 deletions(-)

diff --git a/board/ge/bx50v3/bx50v3.c b/board/ge/bx50v3/bx50v3.c
index 37de990..cb4deb0 100644
--- a/board/ge/bx50v3/bx50v3.c
+++ b/board/ge/bx50v3/bx50v3.c
@@ -37,7 +37,7 @@ DECLARE_GLOBAL_DATA_PTR;
 #endif
 
 #ifndef CONFIG_SYS_I2C_EEPROM_BUS
-#define CONFIG_SYS_I2C_EEPROM_BUS       2
+#define CONFIG_SYS_I2C_EEPROM_BUS       4
 #endif
 
 #define NC_PAD_CTRL (PAD_CTL_PUS_100K_UP |	\
diff --git a/include/configs/ge_bx50v3.h b/include/configs/ge_bx50v3.h
index 33f5101..eb8f923 100644
--- a/include/configs/ge_bx50v3.h
+++ b/include/configs/ge_bx50v3.h
@@ -299,9 +299,11 @@
 #define CONFIG_SYS_I2C_MXC_I2C2
 #define CONFIG_SYS_I2C_MXC_I2C3
 
-#define CONFIG_SYS_NUM_I2C_BUSES        9
+#define CONFIG_SYS_NUM_I2C_BUSES        11
 #define CONFIG_SYS_I2C_MAX_HOPS         1
 #define CONFIG_SYS_I2C_BUSES	{	{0, {I2C_NULL_HOP} }, \
+					{1, {I2C_NULL_HOP} }, \
+					{2, {I2C_NULL_HOP} }, \
 					{0, {{I2C_MUX_PCA9547, 0x70, 0} } }, \
 					{0, {{I2C_MUX_PCA9547, 0x70, 1} } }, \
 					{0, {{I2C_MUX_PCA9547, 0x70, 2} } }, \
-- 
2.1.4