[U-Boot] [PATCH v5 0/8] Add support for GE PPD

[Lukasz Majewski]

Hi Martyn,

> *** Resend due to previous use of unsubscribed email address ***

Just a small remark.

You may consider using patman to get the list of u-boot community peers
to be CC'ed for your patch. Or at least look for a custodian (in
MAINTAINERS) responsible to IMX (NXP) SoC part of u-boot (in this case
Stefano Babic or Fabio Estevam).

The problem with sending code only to u-boot ML is that it may be
overlooked by people, who are the best candidates to review it.

> 
> This series adds support for the GE PPD. The initial patches in this
> series resolve issues found during development and testing, extend
> existing support and add new support for devices in the PPD. The final
> patch in the series adds the board support for the PPD.
> 
> Ian Ray (2):
>   ext4: recover from filesystem corruption when reading
>   bootcount: add support for bootcounter on EXT filesystem
> 
> Martyn Welch (3):
>   pwm: imx: Enable PWM support on i.MX53
>   arm: mx5: Add more register definitions
>   board: ge: make VPD code common
> 
> Nandor Han (2):
>   imx: mxc_i2c: tweak the i2c transfer method
>   rtc: add support for s35392a
> 
> Peter Senna Tschudin (1):
>   mx53: Add Board support for GE PPD
> 
>  README                                   |   7 +
>  arch/arm/include/asm/arch-mx5/crm_regs.h |   8 +
>  arch/arm/include/asm/arch-mx5/imx-regs.h |  50 ++++
>  arch/arm/mach-imx/mx5/Kconfig            |   7 +
>  board/ge/bx50v3/Makefile                 |   2 +-
>  board/ge/bx50v3/bx50v3.c                 |   2 +-
>  board/ge/bx50v3/vpd_reader.c             | 228 ---------------
>  board/ge/bx50v3/vpd_reader.h             |  25 --
>  board/ge/common/Makefile                 |   7 +
>  board/ge/common/vpd_reader.c             | 197 +++++++++++++
>  board/ge/common/vpd_reader.h             |  17 ++
>  board/ge/mx53ppd/Kconfig                 |  17 ++
>  board/ge/mx53ppd/MAINTAINERS             |   7 +
>  board/ge/mx53ppd/Makefile                |  12 +
>  board/ge/mx53ppd/imximage.cfg            |  87 ++++++
>  board/ge/mx53ppd/mx53ppd.c               | 457
> +++++++++++++++++++++++++++++++
> board/ge/mx53ppd/mx53ppd_video.c         | 135 +++++++++
> board/ge/mx53ppd/ppd_gpio.h              |  96 +++++++
> configs/mx53ppd_defconfig                |  39 +++
> drivers/Kconfig                          |   2 +
> drivers/bootcount/Kconfig                |  58 ++++
> drivers/bootcount/Makefile               |   1 +
> drivers/bootcount/bootcount_ext.c        |  62 +++++
> drivers/i2c/mxc_i2c.c                    |  25 +-
> drivers/pwm/pwm-imx-util.c               |   2 +
> drivers/rtc/Kconfig                      |   6 +
> drivers/rtc/Makefile                     |   1 +
> drivers/rtc/s35392a.c                    | 365
> ++++++++++++++++++++++++ fs/ext4/ext4_common.c                    |
> 10 + fs/ext4/ext4fs.c                         |  10 +-
> include/configs/mx53ppd.h                | 248 +++++++++++++++++
> lib/Kconfig                              |   3 + 32 files changed,
> 1927 insertions(+), 266 deletions(-) delete mode 100644
> board/ge/bx50v3/vpd_reader.c delete mode 100644
> board/ge/bx50v3/vpd_reader.h create mode 100644
> board/ge/common/Makefile create mode 100644
> board/ge/common/vpd_reader.c create mode 100644
> board/ge/common/vpd_reader.h create mode 100644
> board/ge/mx53ppd/Kconfig create mode 100644
> board/ge/mx53ppd/MAINTAINERS create mode 100644
> board/ge/mx53ppd/Makefile create mode 100644
> board/ge/mx53ppd/imximage.cfg create mode 100644
> board/ge/mx53ppd/mx53ppd.c create mode 100644
> board/ge/mx53ppd/mx53ppd_video.c create mode 100644
> board/ge/mx53ppd/ppd_gpio.h create mode 100644
> configs/mx53ppd_defconfig create mode 100644 drivers/bootcount/Kconfig
>  create mode 100644 drivers/bootcount/bootcount_ext.c
>  create mode 100644 drivers/rtc/s35392a.c
>  create mode 100644 include/configs/mx53ppd.h
> 



Best regards,

Lukasz Majewski

--

DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 488 bytes
Desc: OpenPGP digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20171109/e2321c45/attachment.sig>