[U-Boot] [PATCH v5 1/2] sun50i: h5: Add NanoPi Neo Plus2 DT initial support

Jagan Teki jagan at amarulasolutions.com
Tue Nov 21 06:29:42 UTC 2017


On Fri, Nov 17, 2017 at 3:09 PM, Antony Antony <antony at phenome.org> wrote:
> Add initial DT for NanoPi NEO Plus2 by FriendlyARM
> - Allwinner quad core H5 Cortex A53 with an ARM Mali-450MP GPU
> - 1 GB DDR3 RAM
> - 8GB eMMC flash (Samsung KLM8G1WEPD-B031)
> - micro SD card slot
> - Gigabit Ethernet (external RTL8211E-VB-CG chip)
> - 802.11 b/g/n WiFi, Bluetooth 4.0 (Ampak AP6212A module)
> - 2x USB 2.0 host ports
>
> Signed-off-by: Antony Antony <antony at phenome.org>
> ---
> Changes v1->v2
>  removed memory {}, compatible ="allwinner,sun5i-a13-mmc"
>  remove CONFIG_SPL_SPI_FLASH_SUPPORT=y and CONFIG_SPL_SPI_SUNXI=y (no SPI)
>  remove CONFIG_SD_BOOT=y
> Changes v2->v3
>  removed compatible ="allwinner,sun50i-a64-mmc"
> Changes v3->v4
>  removed compatible from mmc0
>  add h5 & a64 compaitable to sun50i-h5.dtsi
> Changes v4->v5
>         update sun50i-h5.dtsi to krenel tree 4.14
> ---
>  arch/arm/dts/Makefile                       |   1 +
>  arch/arm/dts/sun50i-h5-nanopi-neo-plus2.dts | 106 ++++++++++++++++++++++++++++
>  configs/nanopi_neo_plus2_defconfig          |  18 +++++

Update board MAINTAINERS file as well.

>  3 files changed, 125 insertions(+)
>  create mode 100644 arch/arm/dts/sun50i-h5-nanopi-neo-plus2.dts
>  create mode 100644 configs/nanopi_neo_plus2_defconfig
>
> diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
> index 6db64f91..e44ceaf 100644
> --- a/arch/arm/dts/Makefile
> +++ b/arch/arm/dts/Makefile
> @@ -336,6 +336,7 @@ dtb-$(CONFIG_MACH_SUN8I_V3S) += \
>         sun8i-v3s-licheepi-zero.dtb
>  dtb-$(CONFIG_MACH_SUN50I_H5) += \
>         sun50i-h5-nanopi-neo2.dtb \
> +       sun50i-h5-nanopi-neo-plus2.dtb \
>         sun50i-h5-orangepi-pc2.dtb \
>         sun50i-h5-orangepi-prime.dtb \
>         sun50i-h5-orangepi-zero-plus2.dtb
> diff --git a/arch/arm/dts/sun50i-h5-nanopi-neo-plus2.dts b/arch/arm/dts/sun50i-h5-nanopi-neo-plus2.dts
> new file mode 100644
> index 0000000..f1406c2
> --- /dev/null
> +++ b/arch/arm/dts/sun50i-h5-nanopi-neo-plus2.dts
> @@ -0,0 +1,106 @@
> +/*
> + * Copyright (C) 2017 Antony Antony <antony at phenome.org>
> + * Copyright (c) 2016 ARM Ltd.
> + *
> + * This file is dual-licensed: you can use it either under the terms
> + * of the GPL or the X11 license, at your option. Note that this dual
> + * licensing only applies to this file, and not this project as a
> + * whole.
> + *
> + *  a) This library is free software; you can redistribute it and/or
> + *     modify it under the terms of the GNU General Public License as
> + *     published by the Free Software Foundation; either version 2 of the
> + *     License, or (at your option) any later version.
> + *
> + *     This library is distributed in the hope that it will be useful,
> + *     but WITHOUT ANY WARRANTY; without even the implied warranty of
> + *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> + *     GNU General Public License for more details.
> + *
> + * Or, alternatively,
> + *
> + *  b) Permission is hereby granted, free of charge, to any person
> + *     obtaining a copy of this software and associated documentation
> + *     files (the "Software"), to deal in the Software without
> + *     restriction, including without limitation the rights to use,
> + *     copy, modify, merge, publish, distribute, sublicense, and/or
> + *     sell copies of the Software, and to permit persons to whom the
> + *     Software is furnished to do so, subject to the following
> + *     conditions:
> + *
> + *     The above copyright notice and this permission notice shall be
> + *     included in all copies or substantial portions of the Software.
> + *
> + *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
> + *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
> + *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
> + *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
> + *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
> + *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
> + *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
> + *     OTHER DEALINGS IN THE SOFTWARE.
> + */
> +
> +/dts-v1/;
> +
> +#include "sun50i-h5.dtsi"
> +
> +#include <dt-bindings/gpio/gpio.h>
> +
> +/ {
> +       model = "FriendlyARM NanoPi NEO Plus 2";
> +       compatible = "friendlyarm,nanopi-neo-plus2", "allwinner,sun50i-h5";
> +
> +       aliases {
> +               serial0 = &uart0;
> +       };
> +
> +       chosen {
> +               stdout-path = "serial0:115200n8";
> +       };
> +
> +       reg_vcc3v3: vcc3v3 {
> +               compatible = "regulator-fixed";
> +               regulator-name = "vcc3v3";
> +               regulator-min-microvolt = <3300000>;
> +               regulator-max-microvolt = <3300000>;
> +       };
> +};
> +
> +&ehci1 {
> +       status = "okay";
> +};
> +
> +&mmc0 {
> +       pinctrl-names = "default";
> +       pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin>;
> +       vmmc-supply = <&reg_vcc3v3>;
> +       bus-width = <4>;
> +       cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>;
> +       cd-inverted;
> +       status = "okay";
> +};
> +
> +&mmc2 {
> +       pinctrl-names = "default";
> +       pinctrl-0 = <&mmc2_8bit_pins>;
> +       vmmc-supply = <&reg_vcc3v3>;
> +       bus-width = <8>;
> +       non-removable;
> +       cap-mmc-hw-reset;
> +       status = "okay";
> +};
> +
> +&ohci1 {
> +       status = "okay";
> +};
> +
> +&uart0 {
> +       pinctrl-names = "default";
> +       pinctrl-0 = <&uart0_pins_a>;
> +       status = "okay";
> +};
> +
> +&usbphy {
> +       status = "okay";
> +};
> diff --git a/configs/nanopi_neo_plus2_defconfig b/configs/nanopi_neo_plus2_defconfig
> new file mode 100644
> index 0000000..83a8dff
> --- /dev/null
> +++ b/configs/nanopi_neo_plus2_defconfig
> @@ -0,0 +1,18 @@
> +CONFIG_ARM=y
> +CONFIG_ARCH_SUNXI=y
> +CONFIG_MACH_SUN50I_H5=y
> +CONFIG_DRAM_CLK=408
> +CONFIG_DRAM_ZQ=3881977
> +CONFIG_MACPWR="PD6"
> +CONFIG_DEFAULT_DEVICE_TREE="sun50i-h5-nanopi-neo-plus2"
> +# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
> +CONFIG_SPL=y
> +# CONFIG_CMD_IMLS is not set
> +# CONFIG_CMD_FLASH is not set
> +# CONFIG_CMD_FPGA is not set
> +# CONFIG_SPL_DOS_PARTITION is not set
> +# CONFIG_SPL_ISO_PARTITION is not set
> +# CONFIG_SPL_EFI_PARTITION is not set
> +CONFIG_SUN8I_EMAC=y
> +CONFIG_USB_EHCI_HCD=y
> +CONFIG_MMC_SUNXI_SLOT_EXTRA=2

Did you test eMMC boot?

thanks!
-- 
Jagan Teki
Senior Linux Kernel Engineer | Amarula Solutions
U-Boot, Linux | Upstream Maintainer
Hyderabad, India.


More information about the U-Boot mailing list