[U-Boot] [PATCH 17/22] mtd: nand: allow drivers to request minimum alignment for passed buffer

[Masahiro Yamada]

In some cases, nand_do_{read,write}_ops is passed with unaligned
ops->datbuf.  Drivers using DMA will be unhappy about unaligned
buffer.

The new struct member, buf_align, represents the minimum alignment
the driver require for the buffer.  If the buffer passed from the
upper MTD layer does not have enough alignment, nand_do_*_ops will
use bufpoi.

Signed-off-by: Masahiro Yamada <yamada.masahiro at socionext.com>
Signed-off-by: Boris Brezillon <boris.brezillon at free-electrons.com>

[Linux commit: 477544c62a84d3bacd9f90ba75ffc16c04d78071]

---

 drivers/mtd/nand/nand_base.c | 8 ++++++++
 include/linux/mtd/nand.h     | 2 ++
 2 files changed, 10 insertions(+)

diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c
index 16d4554..f3c515b 100644
--- a/drivers/mtd/nand/nand_base.c
+++ b/drivers/mtd/nand/nand_base.c
@@ -1720,6 +1720,9 @@ static int nand_do_read_ops(struct mtd_info *mtd, loff_t from,
 
 		if (!aligned)
 			use_bufpoi = 1;
+		else if (chip->options & NAND_USE_BOUNCE_BUFFER)
+			use_bufpoi = !IS_ALIGNED((unsigned long)buf,
+						 chip->buf_align);
 		else
 			use_bufpoi = 0;
 
@@ -2575,6 +2578,9 @@ static int nand_do_write_ops(struct mtd_info *mtd, loff_t to,
 
 		if (part_pagewr)
 			use_bufpoi = 1;
+		else if (chip->options & NAND_USE_BOUNCE_BUFFER)
+			use_bufpoi = !IS_ALIGNED((unsigned long)buf,
+						 chip->buf_align);
 		else
 			use_bufpoi = 0;
 
@@ -3119,6 +3125,8 @@ static void nand_set_defaults(struct nand_chip *chip, int busw)
 		init_waitqueue_head(&chip->controller->wq);
 	}
 
+	if (!chip->buf_align)
+		chip->buf_align = 1;
 }
 
 /* Sanitize ONFI strings so we can safely print them */
diff --git a/include/linux/mtd/nand.h b/include/linux/mtd/nand.h
index be30059..90c6010 100644
--- a/include/linux/mtd/nand.h
+++ b/include/linux/mtd/nand.h
@@ -752,6 +752,7 @@ nand_get_sdr_timings(const struct nand_data_interface *conf)
  *			setting the read-retry mode. Mostly needed for MLC NAND.
  * @ecc:		[BOARDSPECIFIC] ECC control structure
  * @buffers:		buffer structure for read/write
+ * @buf_align:		minimum buffer alignment required by a platform
  * @hwcontrol:		platform-specific hardware control structure
  * @erase:		[REPLACEABLE] erase function
  * @scan_bbt:		[REPLACEABLE] function to scan bad block table
@@ -893,6 +894,7 @@ struct nand_chip {
 
 	struct nand_ecc_ctrl ecc;
 	struct nand_buffers *buffers;
+	unsigned long buf_align;
 	struct nand_hw_control hwcontrol;
 
 	uint8_t *bbt;
-- 
2.7.4