[U-Boot] [PATCH v5 07/11] mmc: convert most of printf() to pr_err() and pr_warn()
Jean-Jacques Hiblot
jjhiblot at ti.com
Thu Nov 30 16:44:00 UTC 2017
This allows to compile out the log message by tweaking the LOGLEVEL.
Signed-off-by: Jean-Jacques Hiblot <jjhiblot at ti.com>
---
changes since v4:
this replaces patch 'mmc: allow to compile out the error messages'. Instead
of using a custom macro to compile out the log messages, rely on the existing
pr_err() and pr_warn() macros and the LOGLEVEL config option.
drivers/mmc/Kconfig | 7 -------
drivers/mmc/mmc.c | 44 ++++++++++++++++++++++----------------------
2 files changed, 22 insertions(+), 29 deletions(-)
diff --git a/drivers/mmc/Kconfig b/drivers/mmc/Kconfig
index dbbef5a..ad3e593 100644
--- a/drivers/mmc/Kconfig
+++ b/drivers/mmc/Kconfig
@@ -58,13 +58,6 @@ config MMC_VERBOSE
Enable the output of more information about the card such as the
operating mode.
-config SPL_MMC_VERBOSE
- bool "Output more information about the MMC in SPL"
- default n
- help
- Enable the output of more information about the card such as the
- operating mode.
-
config SPL_MMC_TINY
bool "Tiny MMC framework in SPL"
help
diff --git a/drivers/mmc/mmc.c b/drivers/mmc/mmc.c
index 13979a5..3fb82d9 100644
--- a/drivers/mmc/mmc.c
+++ b/drivers/mmc/mmc.c
@@ -251,8 +251,8 @@ int mmc_send_status(struct mmc *mmc, int timeout)
if (cmd.response[0] & MMC_STATUS_MASK) {
#if !defined(CONFIG_SPL_BUILD) || defined(CONFIG_SPL_LIBCOMMON_SUPPORT)
- printf("Status Error: 0x%08X\n",
- cmd.response[0]);
+ pr_err("Status Error: 0x%08X\n",
+ cmd.response[0]);
#endif
return -ECOMM;
}
@@ -268,7 +268,7 @@ int mmc_send_status(struct mmc *mmc, int timeout)
mmc_trace_state(mmc, &cmd);
if (timeout <= 0) {
#if !defined(CONFIG_SPL_BUILD) || defined(CONFIG_SPL_LIBCOMMON_SUPPORT)
- printf("Timeout waiting card ready\n");
+ pr_err("Timeout waiting card ready\n");
#endif
return -ETIMEDOUT;
}
@@ -408,7 +408,7 @@ static int mmc_read_blocks(struct mmc *mmc, void *dst, lbaint_t start,
cmd.resp_type = MMC_RSP_R1b;
if (mmc_send_cmd(mmc, &cmd, NULL)) {
#if !defined(CONFIG_SPL_BUILD) || defined(CONFIG_SPL_LIBCOMMON_SUPPORT)
- printf("mmc fail to send stop cmd\n");
+ pr_err("mmc fail to send stop cmd\n");
#endif
return 0;
}
@@ -448,8 +448,8 @@ ulong mmc_bread(struct blk_desc *block_dev, lbaint_t start, lbaint_t blkcnt,
if ((start + blkcnt) > block_dev->lba) {
#if !defined(CONFIG_SPL_BUILD) || defined(CONFIG_SPL_LIBCOMMON_SUPPORT)
- printf("MMC: block number 0x" LBAF " exceeds max(0x" LBAF ")\n",
- start + blkcnt, block_dev->lba);
+ pr_err("MMC: block number 0x" LBAF " exceeds max(0x" LBAF ")\n",
+ start + blkcnt, block_dev->lba);
#endif
return 0;
}
@@ -828,7 +828,7 @@ static int mmc_get_capabilities(struct mmc *mmc)
return 0;
if (!ext_csd) {
- printf("No ext_csd found!\n"); /* this should enver happen */
+ pr_err("No ext_csd found!\n"); /* this should enver happen */
return -ENOTSUPP;
}
@@ -946,17 +946,17 @@ int mmc_hwpart_config(struct mmc *mmc,
return -EINVAL;
if (IS_SD(mmc) || (mmc->version < MMC_VERSION_4_41)) {
- printf("eMMC >= 4.4 required for enhanced user data area\n");
+ pr_err("eMMC >= 4.4 required for enhanced user data area\n");
return -EMEDIUMTYPE;
}
if (!(mmc->part_support & PART_SUPPORT)) {
- printf("Card does not support partitioning\n");
+ pr_err("Card does not support partitioning\n");
return -EMEDIUMTYPE;
}
if (!mmc->hc_wp_grp_size) {
- printf("Card does not define HC WP group size\n");
+ pr_err("Card does not define HC WP group size\n");
return -EMEDIUMTYPE;
}
@@ -964,7 +964,7 @@ int mmc_hwpart_config(struct mmc *mmc,
if (conf->user.enh_size) {
if (conf->user.enh_size % mmc->hc_wp_grp_size ||
conf->user.enh_start % mmc->hc_wp_grp_size) {
- printf("User data enhanced area not HC WP group "
+ pr_err("User data enhanced area not HC WP group "
"size aligned\n");
return -EINVAL;
}
@@ -983,7 +983,7 @@ int mmc_hwpart_config(struct mmc *mmc,
for (pidx = 0; pidx < 4; pidx++) {
if (conf->gp_part[pidx].size % mmc->hc_wp_grp_size) {
- printf("GP%i partition not HC WP group size "
+ pr_err("GP%i partition not HC WP group size "
"aligned\n", pidx+1);
return -EINVAL;
}
@@ -995,7 +995,7 @@ int mmc_hwpart_config(struct mmc *mmc,
}
if (part_attrs && ! (mmc->part_support & ENHNCD_SUPPORT)) {
- printf("Card does not support enhanced attribute\n");
+ pr_err("Card does not support enhanced attribute\n");
return -EMEDIUMTYPE;
}
@@ -1008,7 +1008,7 @@ int mmc_hwpart_config(struct mmc *mmc,
(ext_csd[EXT_CSD_MAX_ENH_SIZE_MULT+1] << 8) +
ext_csd[EXT_CSD_MAX_ENH_SIZE_MULT];
if (tot_enh_size_mult > max_enh_size_mult) {
- printf("Total enhanced size exceeds maximum (%u > %u)\n",
+ pr_err("Total enhanced size exceeds maximum (%u > %u)\n",
tot_enh_size_mult, max_enh_size_mult);
return -EMEDIUMTYPE;
}
@@ -1042,7 +1042,7 @@ int mmc_hwpart_config(struct mmc *mmc,
if (ext_csd[EXT_CSD_PARTITION_SETTING] &
EXT_CSD_PARTITION_SETTING_COMPLETED) {
- printf("Card already partitioned\n");
+ pr_err("Card already partitioned\n");
return -EPERM;
}
@@ -1433,7 +1433,7 @@ static inline int bus_width(uint cap)
return 4;
if (cap == MMC_MODE_1BIT)
return 1;
- printf("invalid bus witdh capability 0x%x\n", cap);
+ pr_warn("invalid bus witdh capability 0x%x\n", cap);
return 0;
}
@@ -1632,7 +1632,7 @@ static int sd_select_mode_and_width(struct mmc *mmc, uint card_caps)
if (!err)
return 0;
- printf("bad ssr\n");
+ pr_warn("bad ssr\n");
error:
/* revert to a safer bus speed */
@@ -1856,7 +1856,7 @@ error:
}
}
- printf("unable to select a mode\n");
+ pr_err("unable to select a mode\n");
return -ENOTSUPP;
}
@@ -2188,7 +2188,7 @@ static int mmc_startup(struct mmc *mmc)
cmd.cmdarg = (mmc->dsr & 0xffff) << 16;
cmd.resp_type = MMC_RSP_NONE;
if (mmc_send_cmd(mmc, &cmd, NULL))
- printf("MMC: SET_DSR failed\n");
+ pr_warn("MMC: SET_DSR failed\n");
}
/* Select the card, and put it into Transfer Mode */
@@ -2341,7 +2341,7 @@ static void mmc_set_initial_state(struct mmc *mmc)
if (err != 0)
err = mmc_set_signal_voltage(mmc, MMC_SIGNAL_VOLTAGE_180);
if (err != 0)
- printf("mmc: failed to set signal voltage\n");
+ pr_warn("mmc: failed to set signal voltage\n");
mmc_select_mode(mmc, MMC_LEGACY);
mmc_set_bus_width(mmc, 1);
@@ -2490,7 +2490,7 @@ retry:
if (err) {
#if !defined(CONFIG_SPL_BUILD) || defined(CONFIG_SPL_LIBCOMMON_SUPPORT)
- printf("Card did not respond to voltage select!\n");
+ pr_err("Card did not respond to voltage select!\n");
#endif
return -EOPNOTSUPP;
}
@@ -2596,7 +2596,7 @@ static int mmc_probe(bd_t *bis)
uclass_foreach_dev(dev, uc) {
ret = device_probe(dev);
if (ret)
- printf("%s - probe failed: %d\n", dev->name, ret);
+ pr_err("%s - probe failed: %d\n", dev->name, ret);
}
return 0;
--
1.9.1
More information about the U-Boot
mailing list