[U-Boot] [PATCH 3/3] MIPS: Break out of cache loops for unimplemented caches

[Paul Burton]

If we run on a CPU which doesn't implement a particular cache then we
would previously get stuck in an infinite loop, executing a cache op on
the first "line" of the missing cache & then incrementing the address by
0. This was being avoided for the L2 caches, but not for the L1s. Fix
this by generalising the check for a zero line size & avoiding the cache
op loop when this is the case.

Signed-off-by: Paul Burton <paul.burton at mips.com>
Cc: Daniel Schwierzeck <daniel.schwierzeck at gmail.com>
Cc: u-boot at lists.denx.de

---

 arch/mips/lib/cache.c | 13 ++++++-------
 1 file changed, 6 insertions(+), 7 deletions(-)

diff --git a/arch/mips/lib/cache.c b/arch/mips/lib/cache.c
index 8e5b028c66..e305f3207a 100644
--- a/arch/mips/lib/cache.c
+++ b/arch/mips/lib/cache.c
@@ -98,6 +98,9 @@ static inline unsigned long scache_line_size(void)
 	const unsigned int cache_ops[] = { ops };			\
 	unsigned int i;							\
 									\
+	if (!lsize)							\
+		break;							\
+									\
 	for (; addr <= aend; addr += lsize) {				\
 		for (i = 0; i < ARRAY_SIZE(cache_ops); i++)		\
 			mips_cache(cache_ops[i], addr);			\
@@ -125,9 +128,7 @@ void flush_cache(ulong start_addr, ulong size)
 	cache_loop(start_addr, start_addr + size, dlsize, HIT_WRITEBACK_INV_D);
 
 	/* flush L2 cache */
-	if (slsize)
-		cache_loop(start_addr, start_addr + size, slsize,
-			   HIT_WRITEBACK_INV_SD);
+	cache_loop(start_addr, start_addr + size, slsize, HIT_WRITEBACK_INV_SD);
 
 	/* flush I-cache */
 	cache_loop(start_addr, start_addr + size, ilsize, HIT_INVALIDATE_I);
@@ -152,8 +153,7 @@ void flush_dcache_range(ulong start_addr, ulong stop)
 	cache_loop(start_addr, stop, lsize, HIT_WRITEBACK_INV_D);
 
 	/* flush L2 cache */
-	if (slsize)
-		cache_loop(start_addr, stop, slsize, HIT_WRITEBACK_INV_SD);
+	cache_loop(start_addr, stop, slsize, HIT_WRITEBACK_INV_SD);
 
 	/* ensure cache ops complete before any further memory accesses */
 	sync();
@@ -169,8 +169,7 @@ void invalidate_dcache_range(ulong start_addr, ulong stop)
 		return;
 
 	/* invalidate L2 cache */
-	if (slsize)
-		cache_loop(start_addr, stop, slsize, HIT_INVALIDATE_SD);
+	cache_loop(start_addr, stop, slsize, HIT_INVALIDATE_SD);
 
 	cache_loop(start_addr, stop, lsize, HIT_INVALIDATE_D);
 
-- 
2.15.0