[U-Boot] [PATCH 1/5] arm: zynq: Return value from fdtdec_setup_memory_banksize directly

[Michal Simek]

There is no reason not to return return value from above function.

Signed-off-by: Michal Simek <michal.simek at xilinx.com>
---

 board/xilinx/zynq/board.c    | 4 +---
 board/xilinx/zynqmp/zynqmp.c | 4 +---
 2 files changed, 2 insertions(+), 6 deletions(-)

diff --git a/board/xilinx/zynq/board.c b/board/xilinx/zynq/board.c
index 90ef542458a9..871e9dcba07f 100644
--- a/board/xilinx/zynq/board.c
+++ b/board/xilinx/zynq/board.c
@@ -132,9 +132,7 @@ int zynq_board_read_rom_ethaddr(unsigned char *ethaddr)
 #if !defined(CONFIG_SYS_SDRAM_BASE) && !defined(CONFIG_SYS_SDRAM_SIZE)
 int dram_init_banksize(void)
 {
-	fdtdec_setup_memory_banksize();
-
-	return 0;
+	return fdtdec_setup_memory_banksize();
 }
 
 int dram_init(void)
diff --git a/board/xilinx/zynqmp/zynqmp.c b/board/xilinx/zynqmp/zynqmp.c
index d17868b0c2b7..a036ed6a35d3 100644
--- a/board/xilinx/zynqmp/zynqmp.c
+++ b/board/xilinx/zynqmp/zynqmp.c
@@ -226,9 +226,7 @@ int zynq_board_read_rom_ethaddr(unsigned char *ethaddr)
 #if !defined(CONFIG_SYS_SDRAM_BASE) && !defined(CONFIG_SYS_SDRAM_SIZE)
 int dram_init_banksize(void)
 {
-	fdtdec_setup_memory_banksize();
-
-	return 0;
+	return fdtdec_setup_memory_banksize();
 }
 
 int dram_init(void)
-- 
1.9.1