[U-Boot] [linux-sunxi] Re: [PATCH] sunxi: add support for Banana Pi M2 Zero board

[Jagan Teki]

On Wed, Nov 1, 2017 at 6:58 PM, Icenowy Zheng <icenowy at aosc.io> wrote:
> 在 2017-11-01 21:21，Jagan Teki 写道：
>>
>> On Wed, Nov 1, 2017 at 6:22 PM, Icenowy Zheng <icenowy at aosc.io> wrote:
>>>
>>> Banana Pi M2 Zero is a board by Sinovoip with Allwinner H2+ SoC, 16-bit
>>> 512MiB DDR3 memory, a MicroSD slot, two MicroUSB ports (one OTG and one
>>> powering-only) and a miniHDMI port.
>>>
>>> Add support for it.
>>>
>>> Signed-off-by: Icenowy Zheng <icenowy at aosc.io>
>>> ---
>>>  arch/arm/dts/Makefile                           |   1 +
>>>  arch/arm/dts/sun8i-h2-plus-bananapi-m2-zero.dts | 130
>>> ++++++++++++++++++++++++
>>>  board/sunxi/MAINTAINERS                         |   5 +
>>>  configs/Sinovoip_BPI_M2_Zero_defconfig          |  16 +++
>>>  4 files changed, 152 insertions(+)
>>>  create mode 100644 arch/arm/dts/sun8i-h2-plus-bananapi-m2-zero.dts
>>>  create mode 100644 configs/Sinovoip_BPI_M2_Zero_defconfig
>>
>>
>> As per as I know bananapi boards now designed from banana-pi.org [1]
>> (not from Sinovoip), in that case bananapi_m2_zero_defconfig would be
>> correct name.
>
>
> Please read the copyright footprint of banana-pi.org, it says "(C)
> 2016-2018 Sinovoip All rights reserved".

Don't know whether it was newly updated or not, I couldn't find
earlier when I add M64

thanks!
-- 
Jagan Teki
Free Software Engineer | www.openedev.com
U-Boot, Linux | Upstream Maintainer
Hyderabad, India.