[U-Boot] [Patch v3] LS2080A_SECURE_BOOT: Enable CONFIG_FSL_LS_PPA.
Udit Agarwal
udit.agarwal at nxp.com
Wed Nov 22 03:32:07 UTC 2017
Adds config CONFIG_FSL_LS_PPA and CONFIG_FSL_CAAM in
LS2080AQDS and LS2080ARDB secure boot defconfig.
Removes CONFIG_FIT, as with CONFIG_FSL_LS_PPA enabled,
CONFIG_FIT is selected.
Removes CONFIG_SPL_RSA as in NOR boot SPL boot is not done.
Signed-off-by: Udit Agarwal <udit.agarwal at nxp.com>
---
Changes in v3:
Corrects commit message for the patch.
configs/ls2080aqds_SECURE_BOOT_defconfig | 5 +++--
configs/ls2080ardb_SECURE_BOOT_defconfig | 5 +++--
2 files changed, 6 insertions(+), 4 deletions(-)
diff --git a/configs/ls2080aqds_SECURE_BOOT_defconfig b/configs/ls2080aqds_SECURE_BOOT_defconfig
index ee6043e..17a077d 100644
--- a/configs/ls2080aqds_SECURE_BOOT_defconfig
+++ b/configs/ls2080aqds_SECURE_BOOT_defconfig
@@ -1,12 +1,13 @@
CONFIG_ARM=y
CONFIG_TARGET_LS2080AQDS=y
+CONFIG_FSL_LS_PPA=y
CONFIG_SECURE_BOOT=y
CONFIG_DEFAULT_DEVICE_TREE="fsl-ls2080a-qds"
# CONFIG_SYS_MALLOC_F is not set
-CONFIG_FIT=y
CONFIG_FIT_VERBOSE=y
CONFIG_OF_BOARD_SETUP=y
CONFIG_OF_STDOUT_VIA_ALIAS=y
+CONFIG_ENV_IS_IN_FLASH=y
CONFIG_BOOTDELAY=10
CONFIG_USE_BOOTARGS=y
CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 ramdisk_size=0x2000000 default_hugepagesz=2m hugepagesz=2m hugepages=256"
@@ -28,6 +29,7 @@ CONFIG_CMD_DATE=y
CONFIG_OF_CONTROL=y
CONFIG_NET_RANDOM_ETHADDR=y
CONFIG_DM=y
+CONFIG_FSL_CAAM=y
CONFIG_MTD_NOR_FLASH=y
CONFIG_DM_SPI_FLASH=y
CONFIG_PHYLIB=y
@@ -47,6 +49,5 @@ CONFIG_USB_XHCI_HCD=y
CONFIG_USB_XHCI_DWC3=y
CONFIG_USB_STORAGE=y
CONFIG_RSA=y
-CONFIG_SPL_RSA=y
CONFIG_RSA_SOFTWARE_EXP=y
CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
diff --git a/configs/ls2080ardb_SECURE_BOOT_defconfig b/configs/ls2080ardb_SECURE_BOOT_defconfig
index 01fc9e6..37137f4 100644
--- a/configs/ls2080ardb_SECURE_BOOT_defconfig
+++ b/configs/ls2080ardb_SECURE_BOOT_defconfig
@@ -1,12 +1,13 @@
CONFIG_ARM=y
CONFIG_TARGET_LS2080ARDB=y
+CONFIG_FSL_LS_PPA=y
CONFIG_SECURE_BOOT=y
CONFIG_DEFAULT_DEVICE_TREE="fsl-ls2080a-rdb"
# CONFIG_SYS_MALLOC_F is not set
-CONFIG_FIT=y
CONFIG_FIT_VERBOSE=y
CONFIG_OF_BOARD_SETUP=y
CONFIG_OF_STDOUT_VIA_ALIAS=y
+CONFIG_ENV_IS_IN_FLASH=y
CONFIG_BOOTDELAY=10
CONFIG_USE_BOOTARGS=y
CONFIG_BOOTARGS="console=ttyS1,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0600 ramdisk_size=0x2000000 default_hugepagesz=2m hugepagesz=2m hugepages=256"
@@ -27,6 +28,7 @@ CONFIG_CMD_DATE=y
CONFIG_OF_CONTROL=y
CONFIG_NET_RANDOM_ETHADDR=y
CONFIG_DM=y
+CONFIG_FSL_CAAM=y
CONFIG_MTD_NOR_FLASH=y
CONFIG_DM_SPI_FLASH=y
CONFIG_PHYLIB=y
@@ -46,6 +48,5 @@ CONFIG_USB_XHCI_HCD=y
CONFIG_USB_XHCI_DWC3=y
CONFIG_USB_STORAGE=y
CONFIG_RSA=y
-CONFIG_SPL_RSA=y
CONFIG_RSA_SOFTWARE_EXP=y
CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
--
1.9.1
More information about the U-Boot
mailing list