[U-Boot] [PATCH] omap3_logic: Enable libfdt in SPL

[Adam Ford]

On Wed, Nov 22, 2017 at 10:28 AM, Adam Ford <aford173 at gmail.com> wrote:
> This commit enables libfdt in SPL and removes manual MMC and serial
> driver manuipluation during SPL building.
>

I guess I will NAK my own work.  I think I misunderstood what was
going on here, and it's not what I thought.

Sorry for the noise.

adam
> Signed-off-by: Adam Ford <aford173 at gmail.com>
>
> diff --git a/board/logicpd/omap3som/omap3logic.c b/board/logicpd/omap3som/omap3logic.c
> index 1da9e38..3d6f3f8 100644
> --- a/board/logicpd/omap3som/omap3logic.c
> +++ b/board/logicpd/omap3som/omap3logic.c
> @@ -40,21 +40,6 @@
>
>  DECLARE_GLOBAL_DATA_PTR;
>
> -/* This is only needed until SPL gets OF support */
> -#ifdef CONFIG_SPL_BUILD
> -static const struct ns16550_platdata omap3logic_serial = {
> -       .base = OMAP34XX_UART1,
> -       .reg_shift = 2,
> -       .clock = V_NS16550_CLK,
> -       .fcr = UART_FCR_DEFVAL,
> -};
> -
> -U_BOOT_DEVICE(omap3logic_uart) = {
> -       "ns16550_serial",
> -       &omap3logic_serial
> -};
> -#endif
> -
>  /*
>   * two dimensional array of strucures containining board name and Linux
>   * machine IDs; row it selected based on CPU column is slected based
> diff --git a/configs/omap3_logic_defconfig b/configs/omap3_logic_defconfig
> index 8801268..8678271 100644
> --- a/configs/omap3_logic_defconfig
> +++ b/configs/omap3_logic_defconfig
> @@ -55,3 +55,4 @@ CONFIG_USB_GADGET_VENDOR_NUM=0x0451
>  CONFIG_USB_GADGET_PRODUCT_NUM=0xd022
>  CONFIG_USB_ETHER=y
>  CONFIG_BCH=y
> +CONFIG_SPL_OF_LIBFDT=y
> diff --git a/include/configs/omap3_logic.h b/include/configs/omap3_logic.h
> index 3ecfb58..29a9f70 100644
> --- a/include/configs/omap3_logic.h
> +++ b/include/configs/omap3_logic.h
> @@ -17,21 +17,6 @@
>
>  #include <configs/ti_omap3_common.h>
>
> -#ifdef CONFIG_SPL_BUILD
> -/*
> - * Disable MMC DM for SPL build and can be re-enabled after adding
> - * DM support in SPL
> - */
> -#undef CONFIG_DM_MMC
> -#undef OMAP_HSMMC_USE_GPIO
> -
> -/* select serial console configuration for SPL */
> -#undef CONFIG_CONS_INDEX
> -#define CONFIG_CONS_INDEX              1
> -#define CONFIG_SYS_NS16550_COM1                OMAP34XX_UART1
> -#endif
> -
> -
>  /*
>   * We are only ever GP parts and will utilize all of the "downloaded image"
>   * area in SRAM which starts at 0x40200000 and ends at 0x4020FFFF (64KB) in
> --
> 2.7.4
>