[U-Boot] [PATCH 0/5] mmc: fixes for HS200/UHS core support

[Jaehoon Chung]

On 11/23/2017 11:55 PM, Marek Vasut wrote:
> On 11/23/2017 03:52 PM, Jean-Jacques Hiblot wrote:
>>
>>
>> On 22/11/2017 15:00, Marek Vasut wrote:
>>> On 11/22/2017 01:09 PM, Jaehoon Chung wrote:
>>>> On 11/22/2017 12:13 AM, Jean-Jacques Hiblot wrote:
>>>>> This series applies on top of "[PATCH v2 00/26] mmc: Add support for
>>>>> HS200
>>>>> and UHS modes"
>>>>>
>>>>> It fixes a bug with old SD and MMC cards that support only the
>>>>> legacy mode.
>>>>> It also addresses the comments made on the mailing list:
>>>>> * dump card and host capabilities in debug mode
>>>>> * use 1-bit if the DTS property 'bus-width' is not present.
>>>>> * recognize the "mmc-ddr-1_2v" and "mmc-hs200-1_2v" DTS properties
>>>>>
>>>>> Tested on DRA7, DRA72 and AM335x
>>>> Thanks for sending patches. After testing with my boards, will update.
>>>> For your patches, i made the testing-uhs-supporting branch on
>>>> u-boot-mmc.
>>>>
>>>> At least, i will share the result about testing with my boards.
>>> Any chance this UHS support will make it into this release finally ?
>> I hope so too. Jaehoon, do you need some help with the testing? what
>> would you need?
> 
> It's been tested on 3 different HW platforms and controllers already, so
> I really fail to see much of a reason to drag this on. If something is
> botched on samsung controller, that can always be fixed later.
Ok. I will do. Sorry.

Thanks!


> 
>>> It's been dragging on for like half a year already ...
>>>
>>
>>
> 
>