[U-Boot] sunxi: SATA link timeout fix

[Jagan Teki]

On Wed, Nov 8, 2017 at 5:35 PM, Peter Robinson <pbrobinson at gmail.com> wrote:
> On Wed, Nov 8, 2017 at 11:32 AM, Jagan Teki <jagannadh.teki at gmail.com> wrote:
>> On Tue, Nov 7, 2017 at 5:43 PM, Jagan Teki <jagannadh.teki at gmail.com> wrote:
>>> On Sun, Nov 5, 2017 at 7:11 PM, Werner Böllmann
>>> <Werner.Boellmann at fh-dortmund.de> wrote:
>>>> After updating u-boot from v2016.01 to 2017.09 i got a "SATA link 0 timeout." on my Cubietruck board.
>>>> I tracked this down to this patch.
>>>>
>>>> http://git.denx.de/?p=u-boot.git;a=commitdiff_plain;h=9fbb0c3aa49f4604b0342cb527a6bd099f92eaeb.
>>>
>>> Look like mdelay missing while moving to board file.
>>
>> Can someone test this?
>
> I boot my Cubietruck off a SATA drive without issues with any of those
> intervening releases but it's a SSD so there would be no spin up time
> compared to spinning rust, I don't have a spare spinning disk to test
> it with though.

So w/o the mdelay work for you?

-- 
Jagan Teki
Free Software Engineer | www.openedev.com
U-Boot, Linux | Upstream Maintainer
Hyderabad, India.