[U-Boot] [PATCH v5 3/8] pwm: imx: Enable PWM support on i.MX53

[Stefano Babic]

On 08/11/2017 16:35, Martyn Welch wrote:
> Add missing parts for i.MX53 PWM support
> 
> Acked-by: Nandor Han <nandor.han at ge.com>
> Signed-off-by: Martyn Welch <martyn.welch at collabora.co.uk>
> Cc: Stefano Babic <sbabic at denx.de>
> ---
> Changes for v4:
>    - Removed ifdef.
> 
>  arch/arm/include/asm/arch-mx5/imx-regs.h | 17 +++++++++++++++++
>  drivers/pwm/pwm-imx-util.c               |  2 ++
>  2 files changed, 19 insertions(+)
> 
> diff --git a/arch/arm/include/asm/arch-mx5/imx-regs.h b/arch/arm/include/asm/arch-mx5/imx-regs.h
> index 3e79fa3..2b0dc1e 100644
> --- a/arch/arm/include/asm/arch-mx5/imx-regs.h
> +++ b/arch/arm/include/asm/arch-mx5/imx-regs.h
> @@ -508,6 +508,23 @@ struct fuse_bank4_regs {
>  };
>  #endif
>  
> +#define PWMCR_PRESCALER(x)	(((x - 1) & 0xFFF) << 4)
> +#define PWMCR_DOZEEN		(1 << 24)
> +#define PWMCR_WAITEN		(1 << 23)
> +#define PWMCR_DBGEN		(1 << 22)
> +#define PWMCR_CLKSRC_IPG_HIGH	(2 << 16)
> +#define PWMCR_CLKSRC_IPG	(1 << 16)
> +#define PWMCR_EN		(1 << 0)
> +
> +struct pwm_regs {
> +	u32	cr;
> +	u32	sr;
> +	u32	ir;
> +	u32	sar;
> +	u32	pr;
> +	u32	cnr;
> +};
> +
>  #endif /* __ASSEMBLER__*/
>  
>  #endif				/* __ASM_ARCH_MX5_IMX_REGS_H__ */
> diff --git a/drivers/pwm/pwm-imx-util.c b/drivers/pwm/pwm-imx-util.c
> index 534dd8e..97ac0c8 100644
> --- a/drivers/pwm/pwm-imx-util.c
> +++ b/drivers/pwm/pwm-imx-util.c
> @@ -23,10 +23,12 @@ struct pwm_regs *pwm_id_to_reg(int pwm_id)
>  		return (struct pwm_regs *)PWM1_BASE_ADDR;
>  	case 1:
>  		return (struct pwm_regs *)PWM2_BASE_ADDR;
> +#ifdef CONFIG_MX6
>  	case 2:
>  		return (struct pwm_regs *)PWM3_BASE_ADDR;
>  	case 3:
>  		return (struct pwm_regs *)PWM4_BASE_ADDR;
> +#endif
>  #ifdef CONFIG_MX6SX
>  	case 4:
>  		return (struct pwm_regs *)PWM5_BASE_ADDR;
> 

Acked-by: Stefano Babic <sbabic at denx.de>

Best regards,
Stefano

-- 
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================