[U-Boot] [PATCH v3 6/7] rockchip: rk3128: add defconfig for evb-rk3128

[Kever Yang]

Enable board config for evb-rk3128.
Serial output and eMMC works in this version.

Signed-off-by: Kever Yang <kever.yang at rock-chips.com>
Acked-by: Philipp Tomsich <philipp.tomsich at theobroma-systems.com>
Reviewed-by: Philipp Tomsich <philipp.tomsich at theobroma-systems.com>
---

Changes in v3: None
Changes in v2: None

 configs/evb-rk3128_defconfig | 56 ++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 56 insertions(+)
 create mode 100644 configs/evb-rk3128_defconfig

diff --git a/configs/evb-rk3128_defconfig b/configs/evb-rk3128_defconfig
new file mode 100644
index 0000000..7c2a607
--- /dev/null
+++ b/configs/evb-rk3128_defconfig
@@ -0,0 +1,56 @@
+CONFIG_ARM=y
+CONFIG_ARCH_ROCKCHIP=y
+CONFIG_ROCKCHIP_RK3128=y
+CONFIG_DEFAULT_DEVICE_TREE="rk3128-evb"
+CONFIG_DEBUG_UART=y
+CONFIG_FIT=y
+# CONFIG_DISPLAY_CPUINFO is not set
+CONFIG_FASTBOOT=y
+CONFIG_USB_FUNCTION_FASTBOOT=y
+CONFIG_CMD_FASTBOOT=y
+CONFIG_FASTBOOT_BUF_ADDR=0x60800800
+CONFIG_FASTBOOT_BUF_SIZE=0x04000000
+CONFIG_FASTBOOT_FLASH=y
+CONFIG_FASTBOOT_FLASH_MMC_DEV=0
+# CONFIG_CMD_IMLS is not set
+CONFIG_CMD_GPT=y
+CONFIG_CMD_MMC=y
+CONFIG_CMD_USB=y
+CONFIG_CMD_USB_MASS_STORAGE=y
+# CONFIG_CMD_SETEXPR is not set
+CONFIG_CMD_TIME=y
+CONFIG_REGMAP=y
+CONFIG_SYSCON=y
+CONFIG_CLK=y
+CONFIG_ROCKCHIP_GPIO=y
+CONFIG_SYS_I2C_ROCKCHIP=y
+CONFIG_MMC_DW=y
+CONFIG_MMC_DW_ROCKCHIP=y
+CONFIG_PHY=y
+CONFIG_PHY_ROCKCHIP_INNO_USB2=y
+CONFIG_PINCTRL=y
+CONFIG_PINCTRL_ROCKCHIP_RK3128=y
+CONFIG_REGULATOR_PWM=y
+CONFIG_DM_REGULATOR_FIXED=y
+CONFIG_RAM=y
+CONFIG_DM_RESET=y
+CONFIG_DEBUG_UART_BASE=0x20068000
+CONFIG_DEBUG_UART_CLOCK=24000000
+CONFIG_DEBUG_UART_SHIFT=2
+CONFIG_SYS_NS16550=y
+CONFIG_SYSRESET=y
+CONFIG_USB=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_GENERIC=y
+CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_OHCI_GENERIC=y
+CONFIG_USB_DWC2=y
+CONFIG_USB_STORAGE=y
+CONFIG_USB_GADGET=y
+CONFIG_USB_GADGET_DWC2_OTG=y
+CONFIG_USB_GADGET_DOWNLOAD=y
+CONFIG_G_DNL_MANUFACTURER="Rockchip"
+CONFIG_G_DNL_VENDOR_NUM=0x2207
+CONFIG_G_DNL_PRODUCT_NUM=0x310c
+CONFIG_USE_TINY_PRINTF=y
+CONFIG_ERRNO_STR=y
-- 
1.9.1