[U-Boot] [PATCH 3/4] armv7: ls1021atwr: Add sd_bootcmd for distro fallback in case of sdboot

[Shengzhou Liu]

Signed-off-by: Shengzhou Liu <Shengzhou.Liu at nxp.com>
---
 include/configs/ls1021atwr.h | 14 ++++++++++----
 1 file changed, 10 insertions(+), 4 deletions(-)

diff --git a/include/configs/ls1021atwr.h b/include/configs/ls1021atwr.h
index 0f20e5e2cc..5be61ad7b6 100644
--- a/include/configs/ls1021atwr.h
+++ b/include/configs/ls1021atwr.h
@@ -375,6 +375,8 @@
 	"ramdisk_addr_r=0xa0000000\0"	\
 	"load_addr=0xa0000000\0"	\
 	"kernel_size=0x2800000\0"	\
+	"kernel_addr_sd=0x8000\0"	\
+	"kernel_size_sd=0x14000\0"	\
 	BOOTENV				\
 	"boot_scripts=ls1021atwr_boot.scr\0"	\
 	"boot_script_hdr=hdr_ls1021atwr_bs.out\0"	\
@@ -456,21 +458,25 @@
 			"${scripthdraddr} ${prefix}${boot_script_hdr} " \
 			"&& esbc_validate ${scripthdraddr};"    \
 		"source ${scriptaddr}\0"	  \
-	"installer=load mmc 0:2 $load_addr "	\
-		"/flex_installer_arm32.itb; "		\
-		"bootm $load_addr#ls1021atwr\0"	\
 	"qspi_bootcmd=echo Trying load from qspi..;"	\
 		"sf probe && sf read $load_addr "	\
 		"$kernel_addr $kernel_size && bootm $load_addr#$board\0"	\
 	"nor_bootcmd=echo Trying load from nor..;"	\
 		"cp.b $kernel_addr $load_addr "		\
-		"$kernel_size && bootm $load_addr#$board\0"
+		"$kernel_size && bootm $load_addr#$board\0" \
+	"sd_bootcmd=echo Trying load from SD ..;"       \
+		"mmcinfo && mmc read $load_addr "	\
+		"$kernel_addr_sd $kernel_size_sd && "	\
+		"bootm $load_addr#$board\0"
 #endif
 
 #undef CONFIG_BOOTCOMMAND
 #if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI)
 #define CONFIG_BOOTCOMMAND "run distro_bootcmd; env exists secureboot"	\
 			   "&& esbc_halt; run qspi_bootcmd;"
+#elif defined(CONFIG_SD_BOOT)
+#define CONFIG_BOOTCOMMAND "run distro_bootcmd; env exists secureboot"  \
+			   "&& esbc_halt; run sd_bootcmd;"
 #else
 #define CONFIG_BOOTCOMMAND "run distro_bootcmd; env exists secureboot"	\
 			   "&& esbc_halt; run nor_bootcmd;"
-- 
2.14.1