[U-Boot] [PATCH v5 0/7] Add VID support for QDS and RDB platforms

[York Sun]

On 11/12/2017 09:29 PM, Rajesh Bhagat wrote:
> Adds LTC3882 voltage regulator chip support in common VID driver.
> And adds VID support for LS1088A QDS and RDB platforms.
> 
> Rajesh Bhagat (7):
>   armv8: lsch3: Add serdes and DDR voltage setup
>   board: common:vid: Add LS1088A VID Supported voltage values
>   board: common: vid: Add board specific vdd adjust API
>   board: common: vid: Move IR chip specific code in flag
>   Kconfig: Add LTC3882 voltage regulator config
>   board: common: vid: Add support for LTC3882 voltage regulator chip
>   ls1088a: Add VID support for QDS and RDB platforms
> 
>  .../cpu/armv8/fsl-layerscape/fsl_lsch3_serdes.c    | 306 +++++++++++++++++++++
>  arch/arm/cpu/armv8/fsl-layerscape/soc.c            |  34 +--
>  .../include/asm/arch-fsl-layerscape/fsl_serdes.h   |   2 +-
>  .../include/asm/arch-fsl-layerscape/immap_lsch3.h  |  43 ++-
>  arch/arm/include/asm/arch-fsl-layerscape/soc.h     |   1 +
>  board/freescale/common/Kconfig                     |  16 ++
>  board/freescale/common/vid.c                       | 129 ++++++++-
>  board/freescale/ls1088a/ls1088a.c                  | 120 ++++++++
>  include/configs/ls1088aqds.h                       |  29 ++
>  include/configs/ls1088ardb.h                       |  29 ++
>  10 files changed, 688 insertions(+), 21 deletions(-)
> 

Rajesh,

Reading your patches, it seems you support different voltage for core,
but only support 0.9v for serdes (patch #1) and DDR (patch #7). Is that
right?

York