[U-Boot] [RFC] mmc: fsl_esdhc: Do not set high speed mode on MX25 and MX51

[Benoît Thébaudeau]

Hi Fabio,

On Fri, Nov 3, 2017 at 4:17 PM, Fabio Estevam <festevam at gmail.com> wrote:
> On Sun, Oct 29, 2017 at 7:18 PM, Benoît Thébaudeau
> <benoit.thebaudeau.dev at gmail.com> wrote:
>
>> Of course we can, but CONFIG_SYS_FSL_ERRATUM_ESDHC_A001 seems to be
>> the most optimal approach here, so I'll wait for the answer from your
>> design team before doing anything.
>
> I received the confirmation that ESDHC_A001 also affects mx25 and mx51
> and set a patch series to select this erratum on these SoCs.

Thanks. If NXP could update the corresponding errata sheets, that
would be great.

> Thanks a lot for your help in debugging this problem. Really appreciated!

You're welcome.

Best regards,
Benoît