[U-Boot] [Patch V5 2/2] armv8: ls1088aqds: Add SD boot support for ls1088qds
Ashish Kumar
Ashish.Kumar at nxp.com
Thu Nov 2 04:22:09 UTC 2017
Signed-off-by: Ashish Kumar <Ashish.Kumar at nxp.com>
Signed-off-by: Prabhakar Kushwaha <prabhakar.kushwaha at nxp.com>
Signed-off-by: Raghav Dogra <raghav.dogra at nxp.com>
---
v5:
Move define to defconfig
arch/arm/Kconfig | 1 +
board/freescale/ls1088a/MAINTAINERS | 1 +
configs/ls1088aqds_sdcard_qspi_defconfig | 42 ++++++++++++++++++++++++++++++++
include/configs/ls1088aqds.h | 32 +++++++++++++++++++++---
4 files changed, 73 insertions(+), 3 deletions(-)
create mode 100644 configs/ls1088aqds_sdcard_qspi_defconfig
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 5707111..25514ed 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -824,6 +824,7 @@ config TARGET_LS1088AQDS
select ARMV8_MULTIENTRY
select ARCH_MISC_INIT
select BOARD_LATE_INIT
+ select SUPPORT_SPL
help
Support for NXP LS1088AQDS platform
The LS1088A Development System (QDS) is a high-performance
diff --git a/board/freescale/ls1088a/MAINTAINERS b/board/freescale/ls1088a/MAINTAINERS
index 68f23d6..b3d5c38 100644
--- a/board/freescale/ls1088a/MAINTAINERS
+++ b/board/freescale/ls1088a/MAINTAINERS
@@ -14,3 +14,4 @@ S: Maintained
F: board/freescale/ls1088a/
F: include/configs/ls1088aqds.h
F: configs/ls1088aqds_qspi_defconfig
+F: configs/ls1088aqds_sdcard_qspi_defconfig
diff --git a/configs/ls1088aqds_sdcard_qspi_defconfig b/configs/ls1088aqds_sdcard_qspi_defconfig
new file mode 100644
index 0000000..521f00e
--- /dev/null
+++ b/configs/ls1088aqds_sdcard_qspi_defconfig
@@ -0,0 +1,42 @@
+CONFIG_ARM=y
+CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1088a-qds"
+CONFIG_DM=y
+CONFIG_DM_SPI=y
+CONFIG_DM_SPI_FLASH=y
+CONFIG_CMD_DHCP=y
+CONFIG_CMD_I2C=y
+CONFIG_CMD_MMC=y
+# CONFIG_CMD_SETEXPR is not set
+CONFIG_CMD_SF=y
+CONFIG_CMD_PING=y
+# CONFIG_DISPLAY_BOARDINFO is not set
+CONFIG_E1000=y
+CONFIG_ENV_IS_IN_MMC=y
+CONFIG_FIT=y
+CONFIG_FIT_VERBOSE=y
+CONFIG_FSL_DSPI=y
+CONFIG_FSL_LS_PPA=y
+CONFIG_HUSH_PARSER=y
+CONFIG_NETDEVICES=y
+CONFIG_NET_RANDOM_ETHADDR=y
+CONFIG_OF_BOARD_SETUP=y
+CONFIG_OF_CONTROL=y
+CONFIG_PARTITIONS=y
+CONFIG_SD_BOOT=y
+CONFIG_SPI_FLASH=y
+CONFIG_SPL=y
+CONFIG_SPL_BUILD=y
+CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
+CONFIG_SPL_ENV_SUPPORT=y
+CONFIG_SPL_I2C_SUPPORT=y
+CONFIG_SPL_LIBCOMMON_SUPPORT=y
+CONFIG_SPL_LIBGENERIC_SUPPORT=y
+CONFIG_SPL_MMC_SUPPORT=y
+CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
+CONFIG_SPL_SERIAL_SUPPORT=y
+CONFIG_SYS_EXTRA_OPTIONS="SD_BOOT_QSPI"
+CONFIG_SYS_NS16550=y
+# CONFIG_SYS_MALLOC_F is not set
+CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x8b0
+CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
+CONFIG_TARGET_LS1088AQDS=y
diff --git a/include/configs/ls1088aqds.h b/include/configs/ls1088aqds.h
index e60fe49..310e8fd 100644
--- a/include/configs/ls1088aqds.h
+++ b/include/configs/ls1088aqds.h
@@ -23,6 +23,10 @@ unsigned long get_board_ddr_clk(void);
#define CONFIG_ENV_SIZE 0x2000 /* 8KB */
#define CONFIG_ENV_OFFSET 0x300000 /* 3MB */
#define CONFIG_ENV_SECT_SIZE 0x40000
+#elif defined(CONFIG_SD_BOOT)
+#define CONFIG_ENV_OFFSET (3 * 1024 * 1024)
+#define CONFIG_SYS_MMC_ENV_DEV 0
+#define CONFIG_ENV_SIZE 0x2000
#else
#define CONFIG_ENV_IS_IN_FLASH
#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0x300000)
@@ -30,10 +34,11 @@ unsigned long get_board_ddr_clk(void);
#define CONFIG_ENV_SIZE 0x20000
#endif
-#if defined(CONFIG_QSPI_BOOT)
+#if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI)
#define CONFIG_QIXIS_I2C_ACCESS
#define SYS_NO_FLASH
+#undef CONFIG_CMD_IMLS
#define CONFIG_SYS_CLK_FREQ 100000000
#define CONFIG_DDR_CLK_FREQ 100000000
#else
@@ -190,7 +195,7 @@ unsigned long get_board_ddr_clk(void);
| CSPR_V)
#define CONFIG_SYS_FPGA_AMASK IFC_AMASK(64*1024)
-#if defined(CONFIG_QSPI_BOOT)
+#if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI)
#define CONFIG_SYS_FPGA_CSOR CSOR_GPCM_ADM_SHIFT(0)
#else
#define CONFIG_SYS_FPGA_CSOR CSOR_GPCM_ADM_SHIFT(12)
@@ -293,7 +298,7 @@ unsigned long get_board_ddr_clk(void);
#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5
/* QSPI device */
-#if defined(CONFIG_QSPI_BOOT)
+#if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI)
#define CONFIG_FSL_QSPI
#define FSL_QSPI_FLASH_SIZE (1 << 26)
#define FSL_QSPI_FLASH_NUM 2
@@ -315,7 +320,11 @@ unsigned long get_board_ddr_clk(void);
#define CONFIG_SYS_MEMTEST_START 0x80000000
#define CONFIG_SYS_MEMTEST_END 0x9fffffff
+#ifdef CONFIG_SPL_BUILD
+#define CONFIG_SYS_MONITOR_BASE CONFIG_SPL_TEXT_BASE
+#else
#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
+#endif
#define CONFIG_FSL_MEMAC
@@ -343,6 +352,23 @@ unsigned long get_board_ddr_clk(void);
"sf read 0x80100000 0xE00000 0x100000;" \
"fsl_mc start mc 0x80000000 0x80100000\0" \
"mcmemsize=0x70000000 \0"
+#elif defined(CONFIG_SD_BOOT)
+#undef CONFIG_EXTRA_ENV_SETTINGS
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ "hwconfig=fsl_ddr:bank_intlv=auto\0" \
+ "loadaddr=0x90100000\0" \
+ "kernel_addr=0x800\0" \
+ "ramdisk_addr=0x800000\0" \
+ "ramdisk_size=0x2000000\0" \
+ "fdt_high=0xa0000000\0" \
+ "initrd_high=0xffffffffffffffff\0" \
+ "kernel_start=0x8000\0" \
+ "kernel_load=0xa0000000\0" \
+ "kernel_size=0x14000\0" \
+ "mcinitcmd=mmcinfo;mmc read 0x80000000 0x5000 0x800;" \
+ "mmc read 0x80100000 0x7000 0x800;" \
+ "fsl_mc start mc 0x80000000 0x80100000\0" \
+ "mcmemsize=0x70000000 \0"
#else /* NOR BOOT */
#undef CONFIG_EXTRA_ENV_SETTINGS
#define CONFIG_EXTRA_ENV_SETTINGS \
--
2.7.4
More information about the U-Boot
mailing list