[U-Boot] [PATCH u-boot 1/2] arm: Add LibreTech CC support based on Meson GXL family
Simon Glass
sjg at chromium.org
Tue Nov 21 04:08:58 UTC 2017
Hi Neil,
On 20 November 2017 at 08:04, Neil Armstrong <narmstrong at baylibre.com> wrote:
> This adds platform code for the Libre Computer CC "Le Potato" board based on a
> Meson GXL (S905X) SoC with the Meson GXL configuration.
>
> This initial submission supports UART, MMC/SDCard and Ethernet with the
> Internal RMII PHY.
>
> The meson-gxl-s905x-libretech-cc.dts is synchronised from the linux 4.13
> stable tree as of 4.13.8.
>
> Signed-off-by: Neil Armstrong <narmstrong at baylibre.com>
> ---
> arch/arm/dts/Makefile | 3 +-
> arch/arm/dts/meson-gxl-s905x-libretech-cc.dts | 171 ++++++++++++++++++++++++++
> arch/arm/mach-meson/Kconfig | 9 ++
> board/amlogic/libretech-cc/Kconfig | 12 ++
> board/amlogic/libretech-cc/MAINTAINERS | 6 +
> board/amlogic/libretech-cc/Makefile | 8 ++
> board/amlogic/libretech-cc/README | 96 +++++++++++++++
> board/amlogic/libretech-cc/libretech-cc.c | 58 +++++++++
> configs/libretech-cc_defconfig | 35 ++++++
> include/configs/libretech-cc.h | 24 ++++
> 10 files changed, 421 insertions(+), 1 deletion(-)
> create mode 100644 arch/arm/dts/meson-gxl-s905x-libretech-cc.dts
> create mode 100644 board/amlogic/libretech-cc/Kconfig
> create mode 100644 board/amlogic/libretech-cc/MAINTAINERS
> create mode 100644 board/amlogic/libretech-cc/Makefile
> create mode 100644 board/amlogic/libretech-cc/README
> create mode 100644 board/amlogic/libretech-cc/libretech-cc.c
> create mode 100644 configs/libretech-cc_defconfig
> create mode 100644 include/configs/libretech-cc.h
Reviewed-by: Simon Glass <sjg at chromium.org>
Please see below.
>
> diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
> index cd540e9..1845552 100644
> --- a/arch/arm/dts/Makefile
> +++ b/arch/arm/dts/Makefile
> @@ -55,7 +55,8 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += \
> rv1108-evb.dtb
> dtb-$(CONFIG_ARCH_MESON) += \
> meson-gxbb-odroidc2.dtb \
> - meson-gxl-s905x-p212.dtb
> + meson-gxl-s905x-p212.dtb \
> + meson-gxl-s905x-libretech-cc.dtb
> dtb-$(CONFIG_TEGRA) += tegra20-harmony.dtb \
> tegra20-medcom-wide.dtb \
> tegra20-paz00.dtb \
> diff --git a/arch/arm/dts/meson-gxl-s905x-libretech-cc.dts b/arch/arm/dts/meson-gxl-s905x-libretech-cc.dts
> new file mode 100644
> index 0000000..266fbcf
> --- /dev/null
> +++ b/arch/arm/dts/meson-gxl-s905x-libretech-cc.dts
> @@ -0,0 +1,171 @@
> +/*
> + * Copyright (c) 2017 BayLibre, SAS.
> + * Author: Neil Armstrong <narmstrong at baylibre.com>
> + * Author: Jerome Brunet <jbrunet at baylibre.com>
> + *
> + * SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> + */
> +
> +/dts-v1/;
> +
> +#include <dt-bindings/input/input.h>
> +
> +#include "meson-gxl-s905x.dtsi"
> +
> +/ {
> + compatible = "libretech,cc", "amlogic,s905x", "amlogic,meson-gxl";
> + model = "Libre Technology CC";
> +
> + aliases {
> + serial0 = &uart_AO;
> + };
> +
> + chosen {
> + stdout-path = "serial0:115200n8";
> + };
> +
> + cvbs-connector {
> + compatible = "composite-video-connector";
> +
> + port {
> + cvbs_connector_in: endpoint {
> + remote-endpoint = <&cvbs_vdac_out>;
> + };
> + };
> + };
> +
> + emmc_pwrseq: emmc-pwrseq {
> + compatible = "mmc-pwrseq-emmc";
> + reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>;
> + };
> +
> + hdmi-connector {
> + compatible = "hdmi-connector";
> + type = "a";
> +
> + port {
> + hdmi_connector_in: endpoint {
> + remote-endpoint = <&hdmi_tx_tmds_out>;
> + };
> + };
> + };
> +
> + leds {
> + compatible = "gpio-leds";
> +
> + system {
> + label = "librecomputer:system-status";
> + gpios = <&gpio GPIODV_24 GPIO_ACTIVE_HIGH>;
> + default-state = "on";
> + panic-indicator;
> + };
> +
> + blue {
> + label = "librecomputer:blue";
> + gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_HIGH>;
> + linux,default-trigger = "heartbeat";
> + };
> + };
> +
> + memory at 0 {
> + device_type = "memory";
> + reg = <0x0 0x0 0x0 0x80000000>;
> + };
> +
> + vcc_3v3: regulator-vcc_3v3 {
> + compatible = "regulator-fixed";
> + regulator-name = "VCC_3V3";
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + };
> +
> + vcc_card: regulator-vcc-card {
> + compatible = "regulator-gpio";
> +
> + regulator-name = "VCC_CARD";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <3300000>;
> +
> + gpios = <&gpio_ao GPIOAO_3 GPIO_ACTIVE_HIGH>;
> + gpios-states = <0>;
> +
> + states = <3300000 0>,
> + <1800000 1>;
> + };
> +
> + vddio_boot: regulator-vddio_boot {
> + compatible = "regulator-fixed";
> + regulator-name = "VDDIO_BOOT";
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + };
> +};
> +
> +&cvbs_vdac_port {
> + cvbs_vdac_out: endpoint {
> + remote-endpoint = <&cvbs_connector_in>;
> + };
> +};
> +
> +ðmac {
> + status = "okay";
> +};
> +
> +&ir {
> + status = "okay";
> + pinctrl-0 = <&remote_input_ao_pins>;
> + pinctrl-names = "default";
> +};
> +
> +&hdmi_tx {
> + status = "okay";
> + pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>;
> + pinctrl-names = "default";
> +};
> +
> +&hdmi_tx_tmds_port {
> + hdmi_tx_tmds_out: endpoint {
> + remote-endpoint = <&hdmi_connector_in>;
> + };
> +};
> +
> +/* SD card */
> +&sd_emmc_b {
> + status = "okay";
> + pinctrl-0 = <&sdcard_pins>;
> + pinctrl-names = "default";
> +
> + bus-width = <4>;
> + cap-sd-highspeed;
> + max-frequency = <100000000>;
> + disable-wp;
> +
> + cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_HIGH>;
> + cd-inverted;
> +
> + vmmc-supply = <&vcc_3v3>;
> + vqmmc-supply = <&vcc_card>;
> +};
> +
> +/* eMMC */
> +&sd_emmc_c {
> + status = "okay";
> + pinctrl-0 = <&emmc_pins>;
> + pinctrl-names = "default";
> +
> + bus-width = <8>;
> + cap-mmc-highspeed;
> + max-frequency = <50000000>;
> + non-removable;
> + disable-wp;
> +
> + mmc-pwrseq = <&emmc_pwrseq>;
> + vmmc-supply = <&vcc_3v3>;
> + vqmmc-supply = <&vddio_boot>;
> +};
> +
> +&uart_AO {
> + status = "okay";
> + pinctrl-0 = <&uart_ao_a_pins>;
> + pinctrl-names = "default";
> +};
> diff --git a/arch/arm/mach-meson/Kconfig b/arch/arm/mach-meson/Kconfig
> index d4bd230..ca08dc3 100644
> --- a/arch/arm/mach-meson/Kconfig
> +++ b/arch/arm/mach-meson/Kconfig
> @@ -38,6 +38,13 @@ config TARGET_P212
> with 2 GiB of RAM, Ethernet, HDMI, 2 USB, micro-SD slot,
> eMMC, IR receiver, CVBS+Audio jack and a SDIO WiFi module.
>
> +config TARGET_LIBRETECH_CC
> + bool "LIBRETECH-CC"
> + help
> + LibreTech CC is a single board computer based on Meson GXL
> + with 2 GiB of RAM, Ethernet, HDMI, 4 USB, micro-SD slot,
> + eMMC, IR receiver and a 40-pin GPIO header.
> +
> endif
>
> config SYS_SOC
> @@ -50,4 +57,6 @@ source "board/amlogic/odroid-c2/Kconfig"
>
> source "board/amlogic/p212/Kconfig"
>
> +source "board/amlogic/libretech-cc/Kconfig"
> +
> endif
> diff --git a/board/amlogic/libretech-cc/Kconfig b/board/amlogic/libretech-cc/Kconfig
> new file mode 100644
> index 0000000..7a6f916
> --- /dev/null
> +++ b/board/amlogic/libretech-cc/Kconfig
> @@ -0,0 +1,12 @@
> +if TARGET_LIBRETECH_CC
> +
> +config SYS_BOARD
> + default "libretech-cc"
> +
> +config SYS_VENDOR
> + default "amlogic"
> +
> +config SYS_CONFIG_NAME
> + default "libretech-cc"
> +
> +endif
> diff --git a/board/amlogic/libretech-cc/MAINTAINERS b/board/amlogic/libretech-cc/MAINTAINERS
> new file mode 100644
> index 0000000..398ce57
> --- /dev/null
> +++ b/board/amlogic/libretech-cc/MAINTAINERS
> @@ -0,0 +1,6 @@
> +LIBRETECH-CC
> +M: Neil Armstrong <narmstrong at baylibre.com>
> +S: Maintained
> +F: board/amlogic/libretech-cc/
> +F: include/configs/libretech-cc.h
> +F: configs/libretech-cc_defconfig
> diff --git a/board/amlogic/libretech-cc/Makefile b/board/amlogic/libretech-cc/Makefile
> new file mode 100644
> index 0000000..d0e3bbb
> --- /dev/null
> +++ b/board/amlogic/libretech-cc/Makefile
> @@ -0,0 +1,8 @@
> +#
> +# (C) Copyright 2016 BayLibre, SAS
> +# Author: Neil Armstrong <narmstrong at baylibre.com>
> +#
> +# SPDX-License-Identifier: GPL-2.0+
> +#
> +
> +obj-y := libretech-cc.o
> diff --git a/board/amlogic/libretech-cc/README b/board/amlogic/libretech-cc/README
> new file mode 100644
> index 0000000..9711e8a
> --- /dev/null
> +++ b/board/amlogic/libretech-cc/README
> @@ -0,0 +1,96 @@
> +U-Boot for LibreTech CC
> +=======================
> +
> +LibreTech CC is a single board computer manufactured by Libre Technology
> +with the following specifications:
> +
> + - Amlogic S905X ARM Cortex-A53 quad-core SoC @ 2GHz
> + - ARM Mali 450 GPU
> + - 2GB DDR3 SDRAM
> + - Gigabit Ethernet
> + - HDMI 2.0 4K/60Hz display
> + - 40-pin GPIO header
> + - 4 x USB 2.0 Host, 1 x USB OTG
> + - eMMC, microSD
> + - Infrared receiver
> +
> +Schematics are available on the manufacturer website.
> +
> +Currently the u-boot port supports the following devices:
> + - serial
> + - eMMC, microSD
> + - Ethernet
> +
> +u-boot compilation
U-Boot (always!)
> +==================
> +
> + > export ARCH=arm
> + > export CROSS_COMPILE=aarch64-none-elf-
> + > make libretech-cc_defconfig
> + > make
> +
> +Image creation
> +==============
> +
> +Amlogic doesn't provide sources for the firmware and for tools needed
> +to create the bootloader image, so it is necessary to obtain them from
> +the git tree published by the board vendor:
> +
> + > wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz
> + > wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz
> + > tar xvfJ gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz
> + > tar xvfJ gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz
> + > export PATH=$PWD/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux/bin:$PWD/gcc-linaro-arm-none-eabi-4.8-2013.11_linux/bin:$PATH
> + > git clone https://github.com/BayLibre/u-boot.git -b libretech-cc amlogic-u-boot
> + > cd amlogic-u-boot
> + > make libretech_cc_defconfig
> + > make
> + > export FIPDIR=$PWD/fip
> +
> +Go back to mainline U-boot source tree then :
U-Boot
> + > mkdir fip
> +
> + > cp $FIPDIR/gxl/bl2.bin fip/
> + > cp $FIPDIR/gxl/acs.bin fip/
> + > cp $FIPDIR/gxl/bl21.bin fip/
> + > cp $FIPDIR/gxl/bl30.bin fip/
> + > cp $FIPDIR/gxl/bl301.bin fip/
> + > cp $FIPDIR/gxl/bl31.img fip/
> + > cp u-boot.bin fip/bl33.bin
> +
> + > $FIPDIR/blx_fix.sh \
> + fip/bl30.bin \
> + fip/zero_tmp \
> + fip/bl30_zero.bin \
> + fip/bl301.bin \
> + fip/bl301_zero.bin \
> + fip/bl30_new.bin \
> + bl30
> +
> + > $FIPDIR/acs_tool.pyc fip/bl2.bin fip/bl2_acs.bin fip/acs.bin 0
> +
> + > $FIPDIR/blx_fix.sh \
> + fip/bl2_acs.bin \
> + fip/zero_tmp \
> + fip/bl2_zero.bin \
> + fip/bl21.bin \
> + fip/bl21_zero.bin \
> + fip/bl2_new.bin \
> + bl2
> +
> + > $FIPDIR/gxl/aml_encrypt_gxl --bl3enc --input fip/bl30_new.bin
> + > $FIPDIR/gxl/aml_encrypt_gxl --bl3enc --input fip/bl31.img
> + > $FIPDIR/gxl/aml_encrypt_gxl --bl3enc --input fip/bl33.bin
> + > $FIPDIR/gxl/aml_encrypt_gxl --bl2sig --input fip/bl2_new.bin --output fip/bl2.n.bin.sig
> + > $FIPDIR/gxl/aml_encrypt_gxl --bootmk \
> + --output fip/u-boot.bin \
> + --bl2 fip/bl2.n.bin.sig \
> + --bl30 fip/bl30_new.bin.enc \
> + --bl31 fip/bl31.img.enc \
> + --bl33 fip/bl33.bin.enc
> +
> +and then write the image to SD with:
> +
> + > DEV=/dev/your_sd_device
> + > dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=512 skip=1 seek=1
> + > dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=1 count=444
It's great to have these instructions, but gosh this is complicated!
> diff --git a/board/amlogic/libretech-cc/libretech-cc.c b/board/amlogic/libretech-cc/libretech-cc.c
> new file mode 100644
> index 0000000..ece8096
> --- /dev/null
> +++ b/board/amlogic/libretech-cc/libretech-cc.c
> @@ -0,0 +1,58 @@
> +/*
> + * Copyright (C) 2016 BayLibre, SAS
> + * Author: Neil Armstrong <narmstrong at baylibre.com>
> + *
> + * SPDX-License-Identifier: GPL-2.0+
> + */
> +
> +#include <common.h>
> +#include <dm.h>
> +#include <asm/io.h>
> +#include <asm/arch/gxbb.h>
> +#include <asm/arch/sm.h>
> +#include <phy.h>
> +
> +#define EFUSE_SN_OFFSET 20
> +#define EFUSE_SN_SIZE 16
> +#define EFUSE_MAC_OFFSET 52
> +#define EFUSE_MAC_SIZE 6
> +
> +int board_init(void)
> +{
> + return 0;
> +}
> +
> +int misc_init_r(void)
> +{
> + u8 mac_addr[EFUSE_MAC_SIZE];
> + char serial[EFUSE_SN_SIZE];
> + ssize_t len;
> +
> + /* Set RMII mode */
> + out_le32(GXBB_ETH_REG_0, GXBB_ETH_REG_0_INVERT_RMII_CLK |
> + GXBB_ETH_REG_0_CLK_EN);
> +
> + /* Use Internal PHY */
> + out_le32(GXBB_ETH_REG_2, 0x10110181);
> + out_le32(GXBB_ETH_REG_3, 0xe40908ff);
> +
> + /* Enable power and clock gate */
> + setbits_le32(GXBB_GCLK_MPEG_1, GXBB_GCLK_MPEG_1_ETH);
> + clrbits_le32(GXBB_MEM_PD_REG_0, GXBB_MEM_PD_REG_0_ETH_MASK);
> +
> + if (!eth_env_get_enetaddr("ethaddr", mac_addr)) {
> + len = meson_sm_read_efuse(EFUSE_MAC_OFFSET,
> + mac_addr, EFUSE_MAC_SIZE);
> + if (len == EFUSE_MAC_SIZE && is_valid_ethaddr(mac_addr))
> + eth_env_set_enetaddr("ethaddr", mac_addr);
> + }
> +
> + if (!env_get("serial#")) {
> + len = meson_sm_read_efuse(EFUSE_SN_OFFSET, serial,
> + EFUSE_SN_SIZE);
> + if (len == EFUSE_SN_SIZE)
> + env_set("serial#", serial);
> + }
> +
> + return 0;
> +}
> diff --git a/configs/libretech-cc_defconfig b/configs/libretech-cc_defconfig
> new file mode 100644
> index 0000000..a63e940
> --- /dev/null
> +++ b/configs/libretech-cc_defconfig
> @@ -0,0 +1,35 @@
> +CONFIG_ARM=y
> +CONFIG_ARCH_MESON=y
> +CONFIG_MESON_GXL=y
> +CONFIG_TARGET_LIBRETECH_CC=y
> +CONFIG_IDENT_STRING=" libretech-cc"
> +CONFIG_DEFAULT_DEVICE_TREE="meson-gxl-s905x-libretech-cc"
> +CONFIG_DEBUG_UART=y
> +CONFIG_ENV_IS_NOWHERE=y
> +# CONFIG_DISPLAY_CPUINFO is not set
> +# CONFIG_DISPLAY_BOARDINFO is not set
> +# CONFIG_CMD_BDI is not set
> +# CONFIG_CMD_IMI is not set
> +# CONFIG_CMD_IMLS is not set
> +# CONFIG_CMD_LOADS is not set
> +CONFIG_CMD_MMC=y
> +# CONFIG_CMD_FPGA is not set
> +CONFIG_CMD_GPIO=y
> +# CONFIG_CMD_SETEXPR is not set
> +CONFIG_OF_CONTROL=y
> +CONFIG_DM_GPIO=y
> +CONFIG_DM_MMC=y
> +CONFIG_MMC_MESON_GX=y
> +CONFIG_DM_ETH=y
> +CONFIG_ETH_DESIGNWARE=y
> +CONFIG_PHY_MESON_GXL=y
> +CONFIG_NET_RANDOM_ETHADDR=y
> +CONFIG_PINCTRL=y
> +CONFIG_PINCTRL_MESON_GXL=y
> +CONFIG_DEBUG_UART_MESON=y
> +CONFIG_DEBUG_UART_BASE=0xc81004c0
> +CONFIG_DEBUG_UART_CLOCK=24000000
> +CONFIG_DEBUG_UART_ANNOUNCE=y
> +CONFIG_DEBUG_UART_SKIP_INIT=y
> +CONFIG_MESON_SERIAL=y
> +CONFIG_OF_LIBFDT_OVERLAY=y
> diff --git a/include/configs/libretech-cc.h b/include/configs/libretech-cc.h
> new file mode 100644
> index 0000000..4e01b40
> --- /dev/null
> +++ b/include/configs/libretech-cc.h
> @@ -0,0 +1,24 @@
> +/*
> + * Configuration for LibreTech CC
> + *
> + * Copyright (C) 2017 Baylibre, SAS
> + * Author: Neil Armstrong <narmstrong at baylibre.com>
> + *
> + * SPDX-License-Identifier: GPL-2.0+
> + */
> +
> +#ifndef __CONFIG_H
> +#define __CONFIG_H
> +
> +#define CONFIG_MISC_INIT_R
> +
> +#define CONFIG_PHY_ADDR 8
> +
> +/* Serial setup */
> +#define CONFIG_CONS_INDEX 0
Do you need this with driver rmodel?
> +
> +#define MESON_FDTFILE_SETTING "fdtfile=amlogic/meson-gxl-s905x-libretech-cc.dtb\0"
> +
> +#include <configs/meson-gxbb-common.h>
> +
> +#endif /* __CONFIG_H */
> --
> 2.7.4
>
Regards,
Simon
More information about the U-Boot
mailing list