[U-Boot] [PATCH v2 08/18] rockchip: pinctrl: Add rk3328 gmac pinctrl support
David Wu
david.wu at rock-chips.com
Thu Nov 9 09:04:39 UTC 2017
Need to set gmac m1 pins iomux, gmac m0 tx pins, select bit2
and bit10 at com iomux register. After that, set rgmii m1 tx
pins to 12ma drive-strength, and clean others to 2ma.
Signed-off-by: David Wu <david.wu at rock-chips.com>
---
Changes in v2:
- New patch
drivers/pinctrl/rockchip/pinctrl_rk3328.c | 236 ++++++++++++++++++++++++++++++
1 file changed, 236 insertions(+)
diff --git a/drivers/pinctrl/rockchip/pinctrl_rk3328.c b/drivers/pinctrl/rockchip/pinctrl_rk3328.c
index 0042025..c155027 100644
--- a/drivers/pinctrl/rockchip/pinctrl_rk3328.c
+++ b/drivers/pinctrl/rockchip/pinctrl_rk3328.c
@@ -72,6 +72,69 @@ enum {
GPIO1A0_SEL_MASK = 0x3fff << GPIO1A0_SEL_SHIFT,
GPIO1A0_CARD_DATA_CLK_CMD_DETN = 0x1555,
+ /* GPIO1B_IOMUX */
+ GPIO1B0_SEL_SHIFT = 0,
+ GPIO1B0_SEL_MASK = GENMASK(1, 0),
+ GPIO1B0_GMAC_TXD1M1 = 2,
+
+ GPIO1B1_SEL_SHIFT = 2,
+ GPIO1B1_SEL_MASK = GENMASK(3, 2),
+ GPIO1B1_GMAC_TXD0M1 = 2,
+
+ GPIO1B2_SEL_SHIFT = 4,
+ GPIO1B2_SEL_MASK = GENMASK(5, 4),
+ GPIO1B2_GMAC_RXD1M1 = 2,
+
+ GPIO1B3_SEL_SHIFT = 6,
+ GPIO1B3_SEL_MASK = GENMASK(7, 6),
+ GPIO1B3_GMAC_RXD0M1 = 2,
+
+ GPIO1B4_SEL_SHIFT = 8,
+ GPIO1B4_SEL_MASK = GENMASK(9, 8),
+ GPIO1B4_GMAC_TXCLKM1 = 2,
+
+ GPIO1B5_SEL_SHIFT = 10,
+ GPIO1B5_SEL_MASK = GENMASK(11, 10),
+ GPIO1B5_GMAC_RXCLKM1 = 2,
+
+ GPIO1B6_SEL_SHIFT = 12,
+ GPIO1B6_SEL_MASK = GENMASK(13, 12),
+ GPIO1B6_GMAC_RXD3M1 = 2,
+
+ GPIO1B7_SEL_SHIFT = 14,
+ GPIO1B7_SEL_MASK = GENMASK(15, 14),
+ GPIO1B7_GMAC_RXD2M1 = 2,
+
+ /* GPIO1C_IOMUX */
+ GPIO1C0_SEL_SHIFT = 0,
+ GPIO1C0_SEL_MASK = GENMASK(1, 0),
+ GPIO1C0_GMAC_TXD3M1 = 2,
+
+ GPIO1C1_SEL_SHIFT = 2,
+ GPIO1C1_SEL_MASK = GENMASK(3, 2),
+ GPIO1C1_GMAC_TXD2M1 = 2,
+
+ GPIO1C3_SEL_SHIFT = 6,
+ GPIO1C3_SEL_MASK = GENMASK(7, 6),
+ GPIO1C3_GMAC_MDIOM1 = 2,
+
+ GPIO1C5_SEL_SHIFT = 10,
+ GPIO1C5_SEL_MASK = GENMASK(11, 10),
+ GPIO1C5_GMAC_CLKM1 = 2,
+
+ GPIO1C6_SEL_SHIFT = 12,
+ GPIO1C6_SEL_MASK = GENMASK(13, 12),
+ GPIO1C6_GMAC_RXDVM1 = 2,
+
+ GPIO1C7_SEL_SHIFT = 14,
+ GPIO1C7_SEL_MASK = GENMASK(15, 14),
+ GPIO1C7_GMAC_MDCM1 = 2,
+
+ /* GPIO1D_IOMUX */
+ GPIO1D1_SEL_SHIFT = 2,
+ GPIO1D1_SEL_MASK = GENMASK(3, 2),
+ GPIO1D1_GMAC_TXENM1 = 2,
+
/* GPIO2A_IOMUX */
GPIO2A0_SEL_SHIFT = 0,
GPIO2A0_SEL_MASK = 3 << GPIO2A0_SEL_SHIFT,
@@ -149,6 +212,11 @@ enum {
IOMUX_SEL_UART2_M0 = 0,
IOMUX_SEL_UART2_M1,
+ IOMUX_SEL_GMAC_SHIFT = 2,
+ IOMUX_SEL_GMAC_MASK = BIT(2),
+ IOMUX_SEL_GMAC_M0 = 0,
+ IOMUX_SEL_GMAC_M1,
+
IOMUX_SEL_SPI_SHIFT = 4,
IOMUX_SEL_SPI_MASK = 3 << IOMUX_SEL_SPI_SHIFT,
IOMUX_SEL_SPI_M0 = 0,
@@ -159,6 +227,47 @@ enum {
IOMUX_SEL_SDMMC_MASK = 1 << IOMUX_SEL_SDMMC_SHIFT,
IOMUX_SEL_SDMMC_M0 = 0,
IOMUX_SEL_SDMMC_M1,
+
+ IOMUX_SEL_GMACM1_OPTIMIZATION_SHIFT = 10,
+ IOMUX_SEL_GMACM1_OPTIMIZATION_MASK = BIT(10),
+ IOMUX_SEL_GMACM1_OPTIMIZATION_BEFORE = 0,
+ IOMUX_SEL_GMACM1_OPTIMIZATION_AFTER,
+
+ /* GRF_GPIO1B_E */
+ GRF_GPIO1B0_E_SHIFT = 0,
+ GRF_GPIO1B0_E_MASK = GENMASK(1, 0),
+ GRF_GPIO1B1_E_SHIFT = 2,
+ GRF_GPIO1B1_E_MASK = GENMASK(3, 2),
+ GRF_GPIO1B2_E_SHIFT = 4,
+ GRF_GPIO1B2_E_MASK = GENMASK(5, 4),
+ GRF_GPIO1B3_E_SHIFT = 6,
+ GRF_GPIO1B3_E_MASK = GENMASK(7, 6),
+ GRF_GPIO1B4_E_SHIFT = 8,
+ GRF_GPIO1B4_E_MASK = GENMASK(9, 8),
+ GRF_GPIO1B5_E_SHIFT = 10,
+ GRF_GPIO1B5_E_MASK = GENMASK(11, 10),
+ GRF_GPIO1B6_E_SHIFT = 12,
+ GRF_GPIO1B6_E_MASK = GENMASK(13, 12),
+ GRF_GPIO1B7_E_SHIFT = 14,
+ GRF_GPIO1B7_E_MASK = GENMASK(15, 14),
+
+ /* GRF_GPIO1C_E */
+ GRF_GPIO1C0_E_SHIFT = 0,
+ GRF_GPIO1C0_E_MASK = GENMASK(1, 0),
+ GRF_GPIO1C1_E_SHIFT = 2,
+ GRF_GPIO1C1_E_MASK = GENMASK(3, 2),
+ GRF_GPIO1C3_E_SHIFT = 6,
+ GRF_GPIO1C3_E_MASK = GENMASK(7, 6),
+ GRF_GPIO1C5_E_SHIFT = 10,
+ GRF_GPIO1C5_E_MASK = GENMASK(11, 10),
+ GRF_GPIO1C6_E_SHIFT = 12,
+ GRF_GPIO1C6_E_MASK = GENMASK(13, 12),
+ GRF_GPIO1C7_E_SHIFT = 14,
+ GRF_GPIO1C7_E_MASK = GENMASK(15, 14),
+
+ /* GRF_GPIO1D_E */
+ GRF_GPIO1D1_E_SHIFT = 2,
+ GRF_GPIO1D1_E_MASK = GENMASK(3, 2),
};
struct rk3328_pinctrl_priv {
@@ -344,6 +453,124 @@ static void pinctrl_rk3328_sdmmc_config(struct rk3328_grf_regs *grf,
}
}
+#if CONFIG_IS_ENABLED(GMAC_ROCKCHIP)
+static void pinctrl_rk3328_gmac_config(struct rk3328_grf_regs *grf, int gmac_id)
+{
+ switch (gmac_id) {
+ case PERIPH_ID_GMAC:
+ /* set rgmii m1 pins mux */
+ rk_clrsetreg(&grf->gpio1b_iomux,
+ GPIO1B0_SEL_MASK |
+ GPIO1B1_SEL_MASK |
+ GPIO1B2_SEL_MASK |
+ GPIO1B3_SEL_MASK |
+ GPIO1B4_SEL_MASK |
+ GPIO1B5_SEL_MASK |
+ GPIO1B6_SEL_MASK |
+ GPIO1B7_SEL_MASK,
+ GPIO1B0_GMAC_TXD1M1 << GPIO1B0_SEL_SHIFT |
+ GPIO1B1_GMAC_TXD0M1 << GPIO1B1_SEL_SHIFT |
+ GPIO1B2_GMAC_RXD1M1 << GPIO1B2_SEL_SHIFT |
+ GPIO1B3_GMAC_RXD0M1 << GPIO1B3_SEL_SHIFT |
+ GPIO1B4_GMAC_TXCLKM1 << GPIO1B4_SEL_SHIFT |
+ GPIO1B5_GMAC_RXCLKM1 << GPIO1B5_SEL_SHIFT |
+ GPIO1B6_GMAC_RXD3M1 << GPIO1B6_SEL_SHIFT |
+ GPIO1B7_GMAC_RXD2M1 << GPIO1B7_SEL_SHIFT);
+
+ rk_clrsetreg(&grf->gpio1c_iomux,
+ GPIO1C0_SEL_MASK |
+ GPIO1C1_SEL_MASK |
+ GPIO1C3_SEL_MASK |
+ GPIO1C5_SEL_MASK |
+ GPIO1C6_SEL_MASK |
+ GPIO1C7_SEL_MASK,
+ GPIO1C0_GMAC_TXD3M1 << GPIO1C0_SEL_SHIFT |
+ GPIO1C1_GMAC_TXD2M1 << GPIO1C1_SEL_SHIFT |
+ GPIO1C3_GMAC_MDIOM1 << GPIO1C3_SEL_SHIFT |
+ GPIO1C5_GMAC_CLKM1 << GPIO1C5_SEL_SHIFT |
+ GPIO1C6_GMAC_RXDVM1 << GPIO1C6_SEL_SHIFT |
+ GPIO1C7_GMAC_MDCM1 << GPIO1C7_SEL_SHIFT);
+
+ rk_clrsetreg(&grf->gpio1d_iomux,
+ GPIO1D1_SEL_MASK,
+ GPIO1D1_GMAC_TXENM1 << GPIO1D1_SEL_SHIFT);
+
+ /* set rgmii m0 tx pins mux */
+ rk_clrsetreg(&grf->gpio0b_iomux,
+ GPIO0B0_SEL_MASK |
+ GPIO0B4_SEL_MASK,
+ GPIO0B0_GAMC_CLKTXM0 << GPIO0B0_SEL_SHIFT |
+ GPIO0B4_GAMC_TXENM0 << GPIO0B4_SEL_SHIFT);
+
+ rk_clrsetreg(&grf->gpio0c_iomux,
+ GPIO0C0_SEL_MASK |
+ GPIO0C1_SEL_MASK |
+ GPIO0C6_SEL_MASK |
+ GPIO0C7_SEL_MASK,
+ GPIO0C0_GAMC_TXD1M0 << GPIO0C0_SEL_SHIFT |
+ GPIO0C1_GAMC_TXD0M0 << GPIO0C1_SEL_SHIFT |
+ GPIO0C6_GAMC_TXD2M0 << GPIO0C6_SEL_SHIFT |
+ GPIO0C7_GAMC_TXD3M0 << GPIO0C7_SEL_SHIFT);
+
+ rk_clrsetreg(&grf->gpio0d_iomux,
+ GPIO0D0_SEL_MASK,
+ GPIO0D0_GMAC_CLKM0 << GPIO0D0_SEL_SHIFT);
+
+ /* set com mux */
+ rk_clrsetreg(&grf->com_iomux,
+ IOMUX_SEL_GMAC_MASK |
+ IOMUX_SEL_GMACM1_OPTIMIZATION_MASK,
+ IOMUX_SEL_GMAC_M1 << IOMUX_SEL_GMAC_SHIFT |
+ IOMUX_SEL_GMACM1_OPTIMIZATION_AFTER <<
+ IOMUX_SEL_GMACM1_OPTIMIZATION_SHIFT);
+
+ /*
+ * set rgmii m1 tx pins to 12ma drive-strength,
+ * and clean others to 2ma.
+ */
+ rk_clrsetreg(&grf->gpio1b_e,
+ GRF_GPIO1B0_E_MASK |
+ GRF_GPIO1B1_E_MASK |
+ GRF_GPIO1B2_E_MASK |
+ GRF_GPIO1B3_E_MASK |
+ GRF_GPIO1B4_E_MASK |
+ GRF_GPIO1B5_E_MASK |
+ GRF_GPIO1B6_E_MASK |
+ GRF_GPIO1B7_E_MASK,
+ 0x3 << GRF_GPIO1B0_E_SHIFT |
+ 0x3 << GRF_GPIO1B1_E_SHIFT |
+ 0x0 << GRF_GPIO1B2_E_SHIFT |
+ 0x0 << GRF_GPIO1B3_E_SHIFT |
+ 0x3 << GRF_GPIO1B4_E_SHIFT |
+ 0x0 << GRF_GPIO1B5_E_SHIFT |
+ 0x0 << GRF_GPIO1B6_E_SHIFT |
+ 0x0 << GRF_GPIO1B7_E_SHIFT);
+
+ rk_clrsetreg(&grf->gpio1c_e,
+ GRF_GPIO1C0_E_MASK |
+ GRF_GPIO1C1_E_MASK |
+ GRF_GPIO1C3_E_MASK |
+ GRF_GPIO1C5_E_MASK |
+ GRF_GPIO1C6_E_MASK |
+ GRF_GPIO1C7_E_MASK,
+ 0x3 << GRF_GPIO1C0_E_SHIFT |
+ 0x3 << GRF_GPIO1C1_E_SHIFT |
+ 0x0 << GRF_GPIO1C3_E_SHIFT |
+ 0x0 << GRF_GPIO1C5_E_SHIFT |
+ 0x0 << GRF_GPIO1C6_E_SHIFT |
+ 0x0 << GRF_GPIO1C7_E_SHIFT);
+
+ rk_clrsetreg(&grf->gpio1d_e,
+ GRF_GPIO1D1_E_MASK,
+ 0x3 << GRF_GPIO1D1_E_SHIFT);
+ break;
+ default:
+ debug("gmac id = %d iomux error!\n", gmac_id);
+ break;
+ }
+}
+#endif
+
static int rk3328_pinctrl_request(struct udevice *dev, int func, int flags)
{
struct rk3328_pinctrl_priv *priv = dev_get_priv(dev);
@@ -380,6 +607,11 @@ static int rk3328_pinctrl_request(struct udevice *dev, int func, int flags)
case PERIPH_ID_SDMMC1:
pinctrl_rk3328_sdmmc_config(priv->grf, func);
break;
+#if CONFIG_IS_ENABLED(GMAC_ROCKCHIP)
+ case PERIPH_ID_GMAC:
+ pinctrl_rk3328_gmac_config(priv->grf, func);
+ break;
+#endif
default:
return -EINVAL;
}
@@ -414,6 +646,10 @@ static int rk3328_pinctrl_get_periph_id(struct udevice *dev,
return PERIPH_ID_SDCARD;
case 14:
return PERIPH_ID_EMMC;
+#if CONFIG_IS_ENABLED(GMAC_ROCKCHIP)
+ case 24:
+ return PERIPH_ID_GMAC;
+#endif
}
return -ENOENT;
--
2.7.4
More information about the U-Boot
mailing list