[U-Boot] [PATCH v2 0/5] sunxi: Enable EMAC on various boards

[Chen-Yu Tsai]

Hi,

This series enables the EMAC for some A83T and A64 boards.

Changes since v1:

  - Added "bitfield: Include linux/bitops.h for ffs()" to fix build
    errors
  - Use bitfield_replace_by_mask() instead of open coding bitfield ops
  - Trimmed used pins in the device tree to only those actually needed
  - Enabled Realtek PHY driver
  - Added "sunxi: Enable EMAC on the Bananapi M64"

ChenYu


Chen-Yu Tsai (5):
  bitfield: Include linux/bitops.h for ffs()
  net: sun8i_emac: Support RX/TX delay chains
  sunxi: Enable EMAC on the Cubietruck Plus
  sunxi: Enable EMAC on the Bananapi M3
  sunxi: Enable EMAC on the Bananapi M64

 arch/arm/dts/sun50i-a64-bananapi-m64-u-boot.dtsi   | 39 +++++++++++++++++++++
 arch/arm/dts/sun8i-a83t-bananapi-m3-u-boot.dtsi    | 40 ++++++++++++++++++++++
 .../arm/dts/sun8i-a83t-cubietruck-plus-u-boot.dtsi | 38 ++++++++++++++++++++
 configs/Cubietruck_plus_defconfig                  |  2 ++
 configs/Sinovoip_BPI_M3_defconfig                  |  2 ++
 drivers/net/sun8i_emac.c                           | 22 ++++++++++++
 include/bitfield.h                                 |  1 +
 7 files changed, 144 insertions(+)
 create mode 100644 arch/arm/dts/sun50i-a64-bananapi-m64-u-boot.dtsi
 create mode 100644 arch/arm/dts/sun8i-a83t-bananapi-m3-u-boot.dtsi
 create mode 100644 arch/arm/dts/sun8i-a83t-cubietruck-plus-u-boot.dtsi

-- 
2.15.0