[U-Boot] [PATCH v3 1/2] thermal: ti-bandgap: Add support for temperature sensor

Faiz Abbas faiz_abbas at ti.com
Tue Oct 24 05:58:12 UTC 2017



On Monday 23 October 2017 04:54 PM, Tom Rini wrote:
> On Mon, Oct 23, 2017 at 10:50:15AM +0530, Faiz Abbas wrote:
>> Hi Tom,
>>
>> On Monday 23 October 2017 08:30 AM, Tom Rini wrote:
>>> On Mon, Oct 23, 2017 at 08:07:09AM +0530, Lokesh Vutla wrote:
>>>> On Wednesday 18 October 2017 05:11 PM, Faiz Abbas wrote:
>>>>> The dra7xx series of SOCs contain a temperature sensor and an
>>>>> associated analog-to-digital converter (ADC) which produces
>>>>> an output which is proportional to the SOC temperature.
>>>>> Add support for this temperature sensor.
>>>>>
>>>>> Signed-off-by: Faiz Abbas <faiz_abbas at ti.com>
>>>>> Reviewed-by: Simon Glass <sjg at chromium.org>
>>>>> ---
>>>>> v3:
>>>>> Added Reviewed-by comment
>>>>>
>>>>> v2:
>>>>>  1. Removed extra elements from ti_bandgap
>>>>>  2. Changed base address to ulong
>>>>>  3. Changed to udev to dev to maintain consistency
>>>>>  4. minor format changes
>>>>>
>>>>>  common/spl/Kconfig                                 |   8 +
>>>>>  configs/dra7xx_evm_defconfig                       |   3 +
>>>>>  .../thermal/ti_soc_thermal.txt                     |  35 ++++
>>>>>  drivers/Makefile                                   |   2 +-
>>>>>  drivers/thermal/Kconfig                            |   6 +
>>>>>  drivers/thermal/Makefile                           |   1 +
>>>>>  drivers/thermal/ti-bandgap.c                       | 197 +++++++++++++++++++++
>>>>>  7 files changed, 251 insertions(+), 1 deletion(-)
>>>>>  create mode 100644 doc/device-tree-bindings/thermal/ti_soc_thermal.txt
>>>>>  create mode 100644 drivers/thermal/ti-bandgap.c
>>>>>
>>>>> diff --git a/common/spl/Kconfig b/common/spl/Kconfig
>>>>> index 0bd8370..0bf3ee3 100644
>>>>> --- a/common/spl/Kconfig
>>>>> +++ b/common/spl/Kconfig
>>>>> @@ -604,6 +604,14 @@ config SPL_SPI_SUPPORT
>>>>>  	  enable SPI drivers that are needed for other purposes also, such
>>>>>  	  as a SPI PMIC.
>>>>>  
>>>>> +config SPL_THERMAL
>>>>> +	bool "Driver support for thermal devices"
>>>>> +	help
>>>>> +	  Enable support for temperature-sensing devices. Some SoCs have on-chip
>>>>> +	  temperature sensors to permit warnings, speed throttling or even
>>>>> +	  automatic power-off when the temperature gets too high or low. Other
>>>>> +	  devices may be discrete but connected on a suitable bus.
>>>>> +
>>>>>  config SPL_USB_HOST_SUPPORT
>>>>>  	bool "Support USB host drivers"
>>>>>  	help
>>>>> diff --git a/configs/dra7xx_evm_defconfig b/configs/dra7xx_evm_defconfig
>>>>> index 468c288..447fb89 100644
>>>>> --- a/configs/dra7xx_evm_defconfig
>>>>> +++ b/configs/dra7xx_evm_defconfig
>>>>> @@ -90,3 +90,6 @@ CONFIG_USB_GADGET=y
>>>>>  CONFIG_USB_GADGET_MANUFACTURER="Texas Instruments"
>>>>>  CONFIG_USB_GADGET_VENDOR_NUM=0x0451
>>>>>  CONFIG_USB_GADGET_PRODUCT_NUM=0xd022
>>>>> +CONFIG_SPL_THERMAL=y
>>>>> +CONFIG_DM_THERMAL=y
>>>>> +CONFIG_TI_DRA7_THERMAL=y
>>>>
>>>> Tom,
>>>> 	Do you want these options to be implied so that it will take effect for
>>>> HS board as well. Or enable it in defconfig as is?
>>>
>>> How important is it that this be enabled?  Is this 100% within the SoC?
>>> Thanks!
>>>
>>
>> There is an upcoming errata which requires temperature support to
>> workaround. This errata will apply to the HS boards as well. Will send a
>> new patch with imply added to TARGET_DRA7XX_EVM for these configs.
> 
> Well, can you _not_ have this support enabled, on the dra7xx family?  If
> it must be always there, please select it.  Otherwise imply is OK.
> Thanks!
> 

Its not enabled in the latest v4. Have added imply in TARGET_DRA7XX_EVM
and TARGET_AM57XX_EVM instead.

Thanks,
Faiz


More information about the U-Boot mailing list