[U-Boot] [PATCH] misc: Kconfig: Add SPL_I2C_EEPROM option

[Yang, Wenyou]

Hi,

Do you have any comments?


On 2017/8/3 9:00, Wenyou Yang wrote:
> This option is an SPL-variant of the I2C_EEPROM option to enable
> the driver for generic I2C-attached EEPROMs for SPL.
>
> Signed-off-by: Wenyou Yang <wenyou.yang at microchip.com>
> ---
>
>   drivers/misc/Kconfig  | 8 ++++++++
>   drivers/misc/Makefile | 2 +-
>   2 files changed, 9 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig
> index d1ddbbe157..e441031d04 100644
> --- a/drivers/misc/Kconfig
> +++ b/drivers/misc/Kconfig
> @@ -196,4 +196,12 @@ config I2C_EEPROM
>   	depends on MISC
>   	help
>   	  Enable a generic driver for EEPROMs attached via I2C.
> +
> +config SPL_I2C_EEPROM
> +	bool "Enable driver for generic I2C-attached EEPROMs for SPL"
> +	depends on MISC && SPL && SPL_DM
> +	help
> +	  This option is an SPL-variant of the I2C_EEPROM option.
> +	  See the help of I2C_EEPROM for details.
> +
>   endmenu
> diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile
> index 10265c8fb4..21f7e6c6f5 100644
> --- a/drivers/misc/Makefile
> +++ b/drivers/misc/Makefile
> @@ -20,7 +20,7 @@ obj-$(CONFIG_CROS_EC_SPI) += cros_ec_spi.o
>   endif
>   obj-$(CONFIG_FSL_IIM) += fsl_iim.o
>   obj-$(CONFIG_LED_STATUS_GPIO) += gpio_led.o
> -obj-$(CONFIG_I2C_EEPROM) += i2c_eeprom.o
> +obj-$(CONFIG_$(SPL_)I2C_EEPROM) += i2c_eeprom.o
>   obj-$(CONFIG_FSL_MC9SDZ60) += mc9sdz60.o
>   obj-$(CONFIG_MXC_OCOTP) += mxc_ocotp.o
>   obj-$(CONFIG_MXS_OCOTP) += mxs_ocotp.o

Best Regards,
Wenyou Yang