September 2017 Archives by author
Starting: Fri Sep 1 00:10:46 UTC 2017
Ending: Sat Sep 30 23:28:22 UTC 2017
Messages: 3733
- [U-Boot] [PATCH v2 5/7] armv8: layerscape: Eanble falcon boot
Albert ARIBAUD (U-Boot)
- [U-Boot] [PATCH] drivers: pci: imx: add imx_pcie_remove function
David Müller (ELSOFT AG)
- [U-Boot] [PATCH] drivers: pci: imx: add imx_pcie_remove function
David Müller (ELSOFT AG)
- [U-Boot] [PATCH] dwc: ep0: Allocate and flush dwc->ep0_trb in a cache aligned manner
Faiz Abbas
- [U-Boot] [PATCH] dm: core: Round up size when allocating so that it is cache line aligned
Faiz Abbas
- [U-Boot] [PATCH] dm: core: Round up size when allocating so that it is cache line aligned
Faiz Abbas
- [U-Boot] [PATCH v2 0/8] imx: add USB Serial Download Protocol (SDP) support
Stefan Agner
- [U-Boot] [PATCH v2 0/8] imx: add USB Serial Download Protocol (SDP) support
Stefan Agner
- [U-Boot] [PATCH v1 1/2] imx: add macro to detect whether USB has been initialized
Stefan Agner
- [U-Boot] [PATCH v1 2/2] imx_common: detect USB serial downloader reliably
Stefan Agner
- [U-Boot] [PATCH v1 1/2] imx: add macro to detect whether USB has been initialized
Stefan Agner
- [U-Boot] [PATCH v1 1/2] imx: add macro to detect whether USB has been initialized
Stefan Agner
- [U-Boot] [PATCH v1 1/2] imx: add macro to detect whether USB has been initialized
Stefan Agner
- [U-Boot] [PATCH v1 1/2] imx: add macro to detect whether USB has been initialized
Stefan Agner
- [U-Boot] [RFC] toradex: imx6: Move g_dnl_bind_fixup() into common SPL code
Stefan Agner
- [U-Boot] [PATCH v2 0/8] imx: add USB Serial Download Protocol (SDP) support
Stefan Agner
- [U-Boot] [PATCH v2 1/2] imx: add macro to detect whether USB PHY is active
Stefan Agner
- [U-Boot] [PATCH v2 2/2] imx_common: detect USB serial downloader reliably
Stefan Agner
- [U-Boot] [PATCH v2 2/2] imx_common: detect USB serial downloader reliably
Stefan Agner
- [U-Boot] [PATCH v2 2/2] imx_common: detect USB serial downloader reliably
Stefan Agner
- [U-Boot] [PATCH v2 0/8] imx: add USB Serial Download Protocol (SDP) support
Stefan Agner
- [U-Boot] [PATCH v3 1/2] imx: add macro to detect whether USB PHY is active
Stefan Agner
- [U-Boot] [PATCH v3 2/2] imx_common: detect USB serial downloader reliably
Stefan Agner
- [U-Boot] [PATCH v3 1/2] imx: add macro to detect whether USB PHY is active
Stefan Agner
- [U-Boot] [PATCH v3 1/2] imx: add macro to detect whether USB PHY is active
Stefan Agner
- [U-Boot] [PATCH v3 1/2] imx: add macro to detect whether USB PHY is active
Stefan Agner
- [U-Boot] [PATCH v3 2/2] imx_common: detect USB serial downloader reliably
Stefan Agner
- [U-Boot] [PATCH v3 1/2] imx: add macro to detect whether USB PHY is active
Stefan Agner
- [U-Boot] [PATCH v3 2/2] imx_common: detect USB serial downloader reliably
Stefan Agner
- [U-Boot] [PATCH] mx6: toradex: Remove custom CONFIG_SPL_PAD_TO definition
Stefan Agner
- [U-Boot] rk3188/rock_defconfig sdmmc failures
Artturi Alm
- [U-Boot] [PATCH] nds32: board: Fix andestech adp-ae3xx.c make fail problem.
Andes
- [U-Boot] [PATCH] nds32: bootm: Fix warning of struct tag_serialnr declared
Andes
- [U-Boot] [PATCH 1/3] nds32: ftmac100: support cache enable.
Andes
- [U-Boot] [PATCH 2/3] nds32: ftmac100 support cache enable.
Andes
- [U-Boot] [PATCH 3/3] nds32: ftmac100: Fix write mac addr fail problem.
Andes
- [U-Boot] [PATCH 1/3] nds32: mtd: add spi flash id MX25U16335E.
Andes
- [U-Boot] [PATCH 2/3] nds32: board: Support SPI driver.
Andes
- [U-Boot] [PATCH 3/3] nds32: spi: Support spi dm driver.
Andes
- [U-Boot] [PATCH] nds32: Fix io.h warning message about readb
Andes
- [U-Boot] [PATCH 0/2] Cleanup old DRA7 pinctrl macros
Suman Anna
- [U-Boot] [PATCH 1/2] arm: am57xx: cl-som-am57x: Use new pinctrl macros
Suman Anna
- [U-Boot] [PATCH 2/2] ARM: DRA7: Cleanup old pinctrl macros
Suman Anna
- [U-Boot] [PATCH v3 00/14] uboot overlays, FIT image & unittest
Pantelis Antoniou
- [U-Boot] [PATCH v3 01/14] Introduce fdt_setprop_placeholder() method
Pantelis Antoniou
- [U-Boot] [PATCH v3 02/14] fdt: Introduce helper method fdt_overlay_apply_verbose()
Pantelis Antoniou
- [U-Boot] [PATCH v3 03/14] fdt: Switch to using the verbose overlay application method
Pantelis Antoniou
- [U-Boot] [PATCH v3 04/14] fdt: Allow stacked overlays phandle references
Pantelis Antoniou
- [U-Boot] [PATCH v3 05/14] fit: Allow multiple images per property
Pantelis Antoniou
- [U-Boot] [PATCH v3 06/14] fit: Do not throw away extra configuration on fit_image_load()
Pantelis Antoniou
- [U-Boot] [PATCH v3 07/14] fit: Introduce methods for applying overlays on fit-load
Pantelis Antoniou
- [U-Boot] [PATCH v3 08/14] fit: fdt overlays doc
Pantelis Antoniou
- [U-Boot] [PATCH v3 09/14] doc: Document how to apply fdt overlays
Pantelis Antoniou
- [U-Boot] [PATCH v3 10/14] doc: overlays: Tweak documentation regarding overlays
Pantelis Antoniou
- [U-Boot] [PATCH v3 11/14] dtbo: make dtbos special
Pantelis Antoniou
- [U-Boot] [PATCH v3 12/14] config: sandbox: Add unit tests
Pantelis Antoniou
- [U-Boot] [PATCH v3 13/14] ut: fix fdt_getprop_u32() change
Pantelis Antoniou
- [U-Boot] [PATCH v3 14/14] test: overlay: Add unit test for stacked overlay
Pantelis Antoniou
- [U-Boot] [PATCH v3 08/14] fit: fdt overlays doc
Pantelis Antoniou
- [U-Boot] [PATCH] sun50i: h5: Add NanoPi Neo Plus2 DT initial support
Antony Antony
- [U-Boot] [PATCH v2] sun50i: h5: Add NanoPi Neo Plus2 DT initial support
Antony Antony
- [U-Boot] [PATCH v3] sun50i: h5: Add NanoPi Neo Plus2 DT initial support
Antony Antony
- [U-Boot] [PATCH v1 1/2] imx: add macro to detect whether USB has been initialized
Stefano Babic
- [U-Boot] [PATCH v1 1/2] imx: add macro to detect whether USB has been initialized
Stefano Babic
- [U-Boot] [U-Boot,2/3] imx: mx6: correct IPU clock
Stefano Babic
- [U-Boot] [PATCH v1 1/2] imx: add macro to detect whether USB has been initialized
Stefano Babic
- [U-Boot] [PATCH] ipu_common: Let the MX6 IPU clock be calculated in run-time
Stefano Babic
- [U-Boot] [PATCH v3 1/2] imx: add macro to detect whether USB PHY is active
Stefano Babic
- [U-Boot] [PATCH] Convert CONFIG_EMIF4 et al to Kconfig
Stefano Babic
- [U-Boot] [PATCH v3 2/2] imx_common: detect USB serial downloader reliably
Stefano Babic
- [U-Boot] [PATCH] imx6: disable clock command and print_cpuinfo code in SPL
Stefano Babic
- [U-Boot] [PATCH] imx6: disable clock command and print_cpuinfo code in SPL
Stefano Babic
- [U-Boot] [PATCH v3 1/2] imx: add macro to detect whether USB PHY is active
Stefano Babic
- [U-Boot] [PATCH v3 2/2] imx_common: detect USB serial downloader reliably
Stefano Babic
- [U-Boot] [PATCH v2] imx: imx7d: remove CamelCase from ENET_xMHz macros
Stefano Babic
- [U-Boot] [PATCH] pico-imx7d: Add "how to boot with NXP 4.1 Kernel"
Stefano Babic
- [U-Boot] [PATCH] imx6: drop duplicated bss memset and board_init_r() call
Stefano Babic
- [U-Boot] [PATCH] detect and setup solidrun hummingboard2
Stefano Babic
- [U-Boot] [PATCH] board: ge: bx50v3: set eth0 MAC address
Stefano Babic
- [U-Boot] [PATCH 1/2] toradex: imx6: Move g_dnl_bind_fixup() into common SPL code
Stefano Babic
- [U-Boot] [PATCH 2/2] mx6sabresd: Add Serial Download Protocol support
Stefano Babic
- [U-Boot] [PULL] Please pull u-boot-imx
Stefano Babic
- [U-Boot] [PATCH 1/2] configs: colibri_imx6: don't configure video in spl
Stefano Babic
- [U-Boot] [PATCH v2] imx: sys_proto: Add a prototype for board_mmc_get_env_dev()
Stefano Babic
- [U-Boot] [PATCH V4 01/12] scripts: spl: fix typo
Stefano Babic
- [U-Boot] [PATCH 1/6] mx6sabresd: Avoid calling setup_display() from SPL code
Stefano Babic
- [U-Boot] [PATCH 2/6] cgtqmx6eval: Avoid calling setup_display() from SPL code
Stefano Babic
- [U-Boot] [PATCH 3/6] wandboard: Avoid calling setup_display() from SPL code
Stefano Babic
- [U-Boot] [PATCH 4/6] mx6cuboxi: Avoid calling setup_display() from SPL code
Stefano Babic
- [U-Boot] [PATCH 5/6] apalis_imx6: Avoid calling setup_display() from SPL code
Stefano Babic
- [U-Boot] [PATCH 5/6] apalis_imx6: Avoid calling setup_display() from SPL code
Stefano Babic
- [U-Boot] [PATCH 5/6] apalis_imx6: Avoid calling setup_display() from SPL code
Stefano Babic
- [U-Boot] [PATCH V4 01/12] scripts: spl: fix typo
Stefano Babic
- [U-Boot] [PATCH V4 11/12] imx: mx6sabresd: enable dm drivers
Stefano Babic
- [U-Boot] [PATCH v2 2/2] wandboard: Add support for the MX6QP variant
Stefano Babic
- [U-Boot] [OE-core] [PATCH] u-boot: Upgrade to 2017.09
Philip Balister
- [U-Boot] [OE-core] [PATCH] u-boot: Upgrade to 2017.09
Philip Balister
- [U-Boot] [PATCH] PCI: layerscape: Make the pcie link up status judgement more specific
Xiaowei Bao
- [U-Boot] [ANN] U-Boot v2017.09-rc4 released
Paul Barker
- [U-Boot] [ANN] U-Boot v2017.09-rc4 released
Paul Barker
- [U-Boot] [PATCH] Revert "dm: arm: rpi: Drop CONFIG_OF_EMBED"
Paul Barker
- [U-Boot] ZynqMP qspi
Liam Beguin
- [U-Boot] ZynqMP qspi
Liam Beguin
- [U-Boot] ZynqMP qspi
Liam Beguin
- [U-Boot] [PATCH 1/9] lib: Add CRC32-C
Marek Behun
- [U-Boot] [PATCH] mvebu: turris_omnia: Only set eth?addr env if CONFIG_CMD_NET
Marek Behún
- [U-Boot] [PATCH 0/9] Add single-device read-only BTRFS support
Marek Behún
- [U-Boot] [PATCH 1/9] lib: Add CRC32-C
Marek Behún
- [U-Boot] [PATCH 2/9] fs: Create a common fs_devread for ext4/reiserfs/zfs
Marek Behún
- [U-Boot] [PATCH 3/9] include: Add a variadic macro to call a callback for all arguments
Marek Behún
- [U-Boot] [PATCH 4/9] fs: btrfs: Add btrfs_tree.h and ctree.h from Linux (and modified)
Marek Behún
- [U-Boot] [PATCH 5/9] fs: btrfs: Add disk-to-cpu and cpu-to-disk conversion functions
Marek Behún
- [U-Boot] [PATCH 6/9] fs: btrfs: Add single-device read-only BTRFS implementation
Marek Behún
- [U-Boot] [PATCH 7/9] fs: btrfs: Add U-Boot fs handlers.
Marek Behún
- [U-Boot] [PATCH 8/9] cmd: Add the 'btrsubvol' command to list BTRFS subvolumes
Marek Behún
- [U-Boot] [PATCH 9/9] mvebu: turris_omnia: Add CONFIG_CMD_BTRFS to defconfig
Marek Behún
- [U-Boot] [PATCH] i2c: muxes: pca954x: look up width from chip_desc
Marek Behún
- [U-Boot] [PATCH] i2c: muxes: pca954x: look up width from chip_desc
Marek Behún
- [U-Boot] [RESEND PATCH v3 0/7] Add VID support for QDS and RDB platforms
Rajesh Bhagat
- [U-Boot] [RESEND PATCH v3 1/7] armv8: lsch3: Add serdes and DDR voltage setup
Rajesh Bhagat
- [U-Boot] [RESEND PATCH v3 2/7] board: common:vid: Add LS1088A VID Supported voltage values
Rajesh Bhagat
- [U-Boot] [RESEND PATCH v3 3/7] board: common: vid: Add board specific vdd adjust API
Rajesh Bhagat
- [U-Boot] [RESEND PATCH v3 4/7] board: common: vid: Move IR chip specific code in flag
Rajesh Bhagat
- [U-Boot] [RESEND PATCH v3 5/7] Kconfig: Add LTC3882 voltage regulator config
Rajesh Bhagat
- [U-Boot] [RESEND PATCH v3 6/7] board: common: vid: Add support for LTC3882 voltage regulator chip
Rajesh Bhagat
- [U-Boot] [RESEND PATCH v3 7/7] ls1088a: Add VID support for QDS and RDB platforms
Rajesh Bhagat
- [U-Boot] [PATCH] arm64: ls1012ardb: Add distro boot support
Rajesh Bhagat
- [U-Boot] [PATCH v2] arm64: ls1012ardb: Add distro boot support
Rajesh Bhagat
- [U-Boot] [PATCH v2] arm64: ls1012ardb: Add distro boot support
Rajesh Bhagat
- [U-Boot] [PATCH v3] arm64: ls1012ardb: Add distro boot support
Rajesh Bhagat
- [U-Boot] [PATCH] arm64: ls1012afrdm: Add distro boot support
Rajesh Bhagat
- [U-Boot] [RESEND PATCH v3 1/7] armv8: lsch3: Add serdes and DDR voltage setup
Rajesh Bhagat
- [U-Boot] VU#166743: Das U-Boot AES-CBC encryption
Blibbet
- [U-Boot] [PATCH] arm: am33xx: Make pin multiplexing functions optional
Felix Brack
- [U-Boot] [PATCH] arm: am33xx: Make pin multiplexing functions optional
Felix Brack
- [U-Boot] [PATCH v2] arm: am33xx: Make pin multiplexing functions optional
Felix Brack
- [U-Boot] [PATCH] doc: Fix statements on case sensitivity for regulator prefix
Felix Brack
- [U-Boot] Ambiguous regulator node name prefixes
Felix Brack
- [U-Boot] [PATCH 1/1] scripts/Makefile.lib: remove overridden target $(obj)/helloworld.so:
Brüns, Stefan
- [U-Boot] [PATCH 0/8] test/py: Fixes for python 3.x
Paul Burton
- [U-Boot] [PATCH 1/8] test/py: Make print statements python 3.x safe
Paul Burton
- [U-Boot] [PATCH 2/8] test/py: Use range() rather than xrange()
Paul Burton
- [U-Boot] [PATCH 3/8] test/py: Import 'configparser' lower case to be python 3.x safe
Paul Burton
- [U-Boot] [PATCH 4/8] test/py: Import StringIO from io module for python 3.x
Paul Burton
- [U-Boot] [PATCH 5/8] test/py: Encode/decode strings for stdio
Paul Burton
- [U-Boot] [PATCH 6/8] test/py: fit: Open files as binary files
Paul Burton
- [U-Boot] [PATCH 7/8] test/py: hush_if_test: Use open() in place of file()
Paul Burton
- [U-Boot] [PATCH 8/8] test/py: vboot: Remove stderr redirect from openssl command
Paul Burton
- [U-Boot] [PATCH v2 0/8] test/py: Fixes for python 3.x
Paul Burton
- [U-Boot] [PATCH v2 1/8] test/py: Make print statements python 3.x safe
Paul Burton
- [U-Boot] [PATCH v2 2/8] test/py: Use range() rather than xrange()
Paul Burton
- [U-Boot] [PATCH v2 3/8] test/py: Import 'configparser' lower case to be python 3.x safe
Paul Burton
- [U-Boot] [PATCH v2 4/8] test/py: Import StringIO from io module for python 3.x
Paul Burton
- [U-Boot] [PATCH v2 5/8] test/py: Encode/decode strings for stdio
Paul Burton
- [U-Boot] [PATCH v2 6/8] test/py: fit: Open files as binary files
Paul Burton
- [U-Boot] [PATCH v2 7/8] test/py: hush_if_test: Use open() in place of file()
Paul Burton
- [U-Boot] [PATCH v2 8/8] test/py: vboot: Remove stderr redirect from openssl command
Paul Burton
- [U-Boot] [PATCH 8/8] test/py: vboot: Remove stderr redirect from openssl command
Paul Burton
- [U-Boot] [PATCH v2 00/13] Add asm-generic/io.h; virt_to_phys(), phys_to_virt() for all arches
Paul Burton
- [U-Boot] [PATCH v2 01/13] Provide a generic io.h & address mapping functions
Paul Burton
- [U-Boot] [PATCH v2 02/13] arc: Use asm-generic/io.h
Paul Burton
- [U-Boot] [PATCH v2 03/13] arm: Use asm-generic/io.h
Paul Burton
- [U-Boot] [PATCH v2 04/13] m68k: Use asm-generic/io.h
Paul Burton
- [U-Boot] [PATCH v2 05/13] microblaze: Use asm-generic/io.h
Paul Burton
- [U-Boot] [PATCH v2 06/13] nds32: Use asm-generic/io.h
Paul Burton
- [U-Boot] [PATCH v2 07/13] sh: Use asm-generic/io.h
Paul Burton
- [U-Boot] [PATCH v2 08/13] x86: Use asm-generic/io.h
Paul Burton
- [U-Boot] [PATCH v2 09/13] xtensa: Use asm-generic/io.h
Paul Burton
- [U-Boot] [PATCH v2 10/13] mips: Use asm-generic/io.h
Paul Burton
- [U-Boot] [PATCH v2 11/13] nios2: Use asm-generic/io.h
Paul Burton
- [U-Boot] [PATCH v2 12/13] powerpc: Use asm-generic/io.h
Paul Burton
- [U-Boot] [PATCH v2 13/13] sandbox: Use asm-generic/io.h
Paul Burton
- [U-Boot] [PATCH] boston: Drop unused return value
Paul Burton
- [U-Boot] [PATCH] boston: Remove unused label in lowlevel_display
Paul Burton
- [U-Boot] [PATCH] MIPS: Drop unused PTR_COUNT_SHIFT from u-boot.lds
Paul Burton
- [U-Boot] [U-Boot, v2, 4/8] test/py: Import StringIO from io module for python 3.x
Paul Burton
- [U-Boot] [OE-core] [PATCH] u-boot: Upgrade to 2017.09
Burton, Ross
- [U-Boot] [PATCH v2 1/2] dm: core: add clocks node scan
Patrice CHOTARD
- [U-Boot] [PATCH v9 00/10] STiH410-B2260: add reset, usb and fastboot support
Patrice CHOTARD
- [U-Boot] [PATCH v9 00/10] STiH410-B2260: add reset, usb and fastboot support
Patrice CHOTARD
- [U-Boot] [PATCH v2 2/3] board: STiH410-B2260: fix sdram size
Patrice CHOTARD
- [U-Boot] [PATCH v2 2/9] serial: stm32x7: add STM32H7 support
Patrice CHOTARD
- [U-Boot] [PATCH v2 3/9] dm: clk: add clk driver support for stm32h7 SoCs
Patrice CHOTARD
- [U-Boot] [PATCH v2 3/9] dm: clk: add clk driver support for stm32h7 SoCs
Patrice CHOTARD
- [U-Boot] [PATCH v2 3/9] dm: clk: add clk driver support for stm32h7 SoCs
Patrice CHOTARD
- [U-Boot] [PATCH v1 1/6] serial: stm32x7: cleanup code
Patrice CHOTARD
- [U-Boot] [PATCH v1 3/6] serial: stm32x7: prepare the ground to STM32F4 support
Patrice CHOTARD
- [U-Boot] [PATCH v1 5/6] serial: stm32x7: add STM32F4 support
Patrice CHOTARD
- [U-Boot] [PATCH] libfdt: Initialize the stack variable
J. William Campbell
- [U-Boot] [v2 PATCH 0/4] Switch odroid to use distro_bootcmd.
Vagrant Cascadian
- [U-Boot] [v2 PATCH 1/4] Fix default console on odroid to only specify the device, as "console=" is redundant with the boot environment.
Vagrant Cascadian
- [U-Boot] [v2 PATCH 2/4] Increase the default environment size on odroid, as config_distro_bootcmd requires a more space for the environment.
Vagrant Cascadian
- [U-Boot] [v2 PATCH 3/4] Switch odroid to use config_distro_bootcmd.
Vagrant Cascadian
- [U-Boot] [v2 PATCH 4/4] Inherit default value for bootdelay from distro_bootcmd on odroid.
Vagrant Cascadian
- [U-Boot] [v2 PATCH] Inherit default value for bootdelay from distro_bootcmd on odroid-xu3.
Vagrant Cascadian
- [U-Boot] Makefile: Update minimum dtc version to 1.4.3
Vagrant Cascadian
- [U-Boot] [PATCH] cmd/gpt.c: Fix warning over memset args in allocate_disk_part
Alison Chaiken
- [U-Boot] [PATCH] test/py: gpt: make use of infra-structure
Alison Chaiken
- [U-Boot] [PATCH 01/19] configs: Add FPGA loadfs config for Arria 10
Chee, Tien Fong
- [U-Boot] [PATCH 03/19] arm: socfpga: Add driver for flash to program FPGA
Chee, Tien Fong
- [U-Boot] [PATCH 05/19] arm: socfpga: Enhance FPGA program support with at least 4 byte data
Chee, Tien Fong
- [U-Boot] [PATCH 07/19] arm: socfpga: Add DRAM bank size initialization function
Chee, Tien Fong
- [U-Boot] [PATCH] libfdt: Initialize the stack variable
Chee, Tien Fong
- [U-Boot] [PATCH 07/19] arm: socfpga: Add DRAM bank size initialization function
Chee, Tien Fong
- [U-Boot] [PATCH 03/19] arm: socfpga: Add driver for flash to program FPGA
Chee, Tien Fong
- [U-Boot] [PATCH 03/19] arm: socfpga: Add driver for flash to program FPGA
Chee, Tien Fong
- [U-Boot] [PATCH 03/19] arm: socfpga: Add driver for flash to program FPGA
Chee, Tien Fong
- [U-Boot] [PATCH 03/19] arm: socfpga: Add driver for flash to program FPGA
Chee, Tien Fong
- [U-Boot] [PATCH v2 19/19] arm: socfpga: Enable SPL loading U-boot to DDR and booting U-boot
Chee, Tien Fong
- [U-Boot] [PATCH v2 17/19] arm: socfpga: Adding clock frequency info for U-boot
Chee, Tien Fong
- [U-Boot] [PATCH v2 16/19] arm: socfpga: Enhance Intel SoCFPGA program header to support Arria 10
Chee, Tien Fong
- [U-Boot] [PATCH v2 15/19] arm: socfpga: Add support to memory allocation in SPL
Chee, Tien Fong
- [U-Boot] [PATCH v2 14/19] arm: socfpga: Enable build for DDR Arria 10
Chee, Tien Fong
- [U-Boot] [PATCH v2 12/19] arm: socfpga: Add DDR driver for Arria 10
Chee, Tien Fong
- [U-Boot] [PATCH v2 11/19] arm: socfpga: Add DRAM bank size initialization function
Chee, Tien Fong
- [U-Boot] [PATCH v2 10/19] arm: socfpga: Rename the gen5 sdram driver to more specific name
Chee, Tien Fong
- [U-Boot] [PATCH v2 09/19] arm: socfpga: Add drivers for programing FPGA from flash
Chee, Tien Fong
- [U-Boot] [PATCH v2 02/19] doc: dtbinding: Description on FPGA RBF properties at Arria 10 FPGA manager
Chee, Tien Fong
- [U-Boot] [PATCH v2 02/19] doc: dtbinding: Description on FPGA RBF properties at Arria 10 FPGA manager
Chee, Tien Fong
- [U-Boot] [PATCH v2 09/19] arm: socfpga: Add drivers for programing FPGA from flash
Chee, Tien Fong
- [U-Boot] [PATCH v2 02/19] doc: dtbinding: Description on FPGA RBF properties at Arria 10 FPGA manager
Chee, Tien Fong
- [U-Boot] [PATCH v2 19/19] arm: socfpga: Enable SPL loading U-boot to DDR and booting U-boot
Chee, Tien Fong
- [U-Boot] [PATCH v2 17/19] arm: socfpga: Adding clock frequency info for U-boot
Chee, Tien Fong
- [U-Boot] [PATCH v2 16/19] arm: socfpga: Enhance Intel SoCFPGA program header to support Arria 10
Chee, Tien Fong
- [U-Boot] [PATCH v2 12/19] arm: socfpga: Add DDR driver for Arria 10
Chee, Tien Fong
- [U-Boot] [PATCH v2 10/19] arm: socfpga: Rename the gen5 sdram driver to more specific name
Chee, Tien Fong
- [U-Boot] [PATCH v2 15/19] arm: socfpga: Add support to memory allocation in SPL
Chee, Tien Fong
- [U-Boot] [PATCH v2 09/19] arm: socfpga: Add drivers for programing FPGA from flash
Chee, Tien Fong
- [U-Boot] [PATCH v2 09/19] arm: socfpga: Add drivers for programing FPGA from flash
Chee, Tien Fong
- [U-Boot] [PATCH v2 09/19] arm: socfpga: Add drivers for programing FPGA from flash
Chee, Tien Fong
- [U-Boot] [PATCH v2 16/19] arm: socfpga: Enhance Intel SoCFPGA program header to support Arria 10
Chee, Tien Fong
- [U-Boot] [PATCH v2 15/19] arm: socfpga: Add support to memory allocation in SPL
Chee, Tien Fong
- [U-Boot] [PATCH v2 02/19] doc: dtbinding: Description on FPGA RBF properties at Arria 10 FPGA manager
Chee, Tien Fong
- [U-Boot] [PATCH v2 09/19] arm: socfpga: Add drivers for programing FPGA from flash
Chee, Tien Fong
- [U-Boot] [PATCH v2 04/19] arm: socfpga: Add Arria 10 SoCFPGA programming interface
Chee, Tien Fong
- [U-Boot] [PATCH V3 1/5] mmc: uniphier-sd: Factor out register IO
Jaehoon Chung
- [U-Boot] [PATCH v2 07/26] mmc: Add a function to dump the mmc capabilities
Jaehoon Chung
- [U-Boot] [PATCH v2 13/26] mmc: Enable signal voltage to be selected from mmc core
Jaehoon Chung
- [U-Boot] [PATCH v2 23/26] mmc: Retry some MMC cmds on failure
Jaehoon Chung
- [U-Boot] [PATCH v2 24/26] mmc: use the right voltage level for MMC DDR and HS200 modes
Jaehoon Chung
- [U-Boot] [PATCH v2 26/26] dm: mmc: Add a library function to parse generic dt binding
Jaehoon Chung
- [U-Boot] [PATCH v3 0/2] power: Add a driver to handle the PBIAS cell of the TI SOCs
Jaehoon Chung
- [U-Boot] [PATCH v2 0/5] mmc: omap_hsmmc: Add support for ADMA
Jaehoon Chung
- [U-Boot] [PATCH v2 00/26] mmc: Add support for HS200 and UHS modes
Jaehoon Chung
- [U-Boot] [PATCH v2 1/5] Revert "omap_hsmmc: update struct hsmmc to accommodate omap3 from DT"
Jaehoon Chung
- [U-Boot] [PATCH v2 0/5] mmc: omap_hsmmc: Add support for ADMA
Jaehoon Chung
- [U-Boot] [GIT PULL] Please pull u-boot-mmc master
Jaehoon Chung
- [U-Boot] [PATCH] mmc: uniphier-sd: Add vqmmc regulator support
Jaehoon Chung
- [U-Boot] [PATCH] mmc: uniphier-sd: Update the file to match V3 patchset
Jaehoon Chung
- [U-Boot] [PATCH v5 1/1] mmc: Add MMC support for stm32h7 Socs
Jaehoon Chung
- [U-Boot] [PATCH] mmc: uniphier-sd: Update the file to match V3 patchset
Jaehoon Chung
- [U-Boot] [PATCH] mmc: uniphier-sd: Add vqmmc regulator support
Jaehoon Chung
- [U-Boot] [PATCH] spl: spl_mmc: add __maybe_unused to mmc_load_image_raw_sector()
Jaehoon Chung
- [U-Boot] [PATCH] mmc: sdhci-cadence: set timing mode register depending on frequency
Jaehoon Chung
- [U-Boot] [GIT PULL] Please pull u-boot-mmc master (take 2)
Jaehoon Chung
- [U-Boot] [PATCH 00/23] efi_loader implement missing functions
Rob Clark
- [U-Boot] [PATCH 00/23] efi_loader implement missing functions
Rob Clark
- [U-Boot] [PATCH v2 0/8] fs/fat: cleanups + readdir implementation
Rob Clark
- [U-Boot] [PATCH v2 1/8] fs/fat: split out helper to init fsdata
Rob Clark
- [U-Boot] [PATCH v2 2/8] fs/fat: introduce new director iterators
Rob Clark
- [U-Boot] [PATCH v2 3/8] fat/fs: convert to directory iterators
Rob Clark
- [U-Boot] [PATCH v2 4/8] fs: add fs_readdir()
Rob Clark
- [U-Boot] [PATCH v2 5/8] fs/fat: implement opendir/readdir/closedir
Rob Clark
- [U-Boot] [PATCH v2 6/8] fat/fs: remove a bunch of dead code
Rob Clark
- [U-Boot] [PATCH v2 7/8] fat/fs: move ls to generic implementation
Rob Clark
- [U-Boot] [PATCH v2 8/8] fs/fat: fix case for FAT shortnames
Rob Clark
- [U-Boot] [PATCH 03/23] efi_loader: support 16 protocols per efi_object
Rob Clark
- [U-Boot] [PATCH v2 1/8] fs/fat: split out helper to init fsdata
Rob Clark
- [U-Boot] [PATCH v2 2/8] fs/fat: introduce new director iterators
Rob Clark
- [U-Boot] [PATCH v2 4/8] fs: add fs_readdir()
Rob Clark
- [U-Boot] [PATCH 00/23] efi_loader implement missing functions
Rob Clark
- [U-Boot] [PATCH v2 7/8] fat/fs: move ls to generic implementation
Rob Clark
- [U-Boot] [PATCH v2 3/8] fat/fs: convert to directory iterators
Rob Clark
- [U-Boot] [PATCH 00/23] efi_loader implement missing functions
Rob Clark
- [U-Boot] [PATCH 0/5] vsprintf and short-wchar for EFI_LOADER
Rob Clark
- [U-Boot] [PATCH 08/23] efi_loader: allow creating new handles
Rob Clark
- [U-Boot] [PATCH] dm: video: Add basic ANSI escape sequence support
Rob Clark
- [U-Boot] [PATCH] dm: video: Fix cache flushes
Rob Clark
- [U-Boot] [PATCH v2 2/8] fs/fat: introduce new director iterators
Rob Clark
- [U-Boot] [PATCH v2 0/5] vsprintf and short-wchar
Rob Clark
- [U-Boot] [PATCH v2 1/5] kbuild: Enable -fshort-wchar
Rob Clark
- [U-Boot] [PATCH v2 2/5] lib: add some utf16 handling helpers
Rob Clark
- [U-Boot] [PATCH v2 3/5] vsprintf.c: add UTF-16 string (%ls) support
Rob Clark
- [U-Boot] [PATCH v2 4/5] vsprintf.c: add GUID printing
Rob Clark
- [U-Boot] [PATCH v2 5/5] examples: add fallback memcpy
Rob Clark
- [U-Boot] [PATCH v3 0/9] fs/fat: cleanups + readdir implementation
Rob Clark
- [U-Boot] [PATCH v3 1/9] fs/fat: split out helper to init fsdata
Rob Clark
- [U-Boot] [PATCH v3 2/9] fs/fat: introduce new director iterators
Rob Clark
- [U-Boot] [PATCH v3 3/9] fat/fs: convert to directory iterators
Rob Clark
- [U-Boot] [PATCH v3 4/9] fs: add fs_readdir()
Rob Clark
- [U-Boot] [PATCH v3 5/9] fs/fat: implement opendir/readdir/closedir
Rob Clark
- [U-Boot] [PATCH v3 6/9] fat/fs: remove a bunch of dead code
Rob Clark
- [U-Boot] [PATCH v3 7/9] fat/fs: move ls to generic implementation
Rob Clark
- [U-Boot] [PATCH v3 8/9] fs/fat: fix case for FAT shortnames
Rob Clark
- [U-Boot] [PATCH v3 9/9] fs/fat: Clean up open-coded sector <-> cluster conversions
Rob Clark
- [U-Boot] [PATCH v2 00/21] efi_loader: enough UEFI for standard distro boot
Rob Clark
- [U-Boot] [PATCH v3 1/9] fs/fat: split out helper to init fsdata
Rob Clark
- [U-Boot] [PATCH v2 01/21] part: move efi_guid_t
Rob Clark
- [U-Boot] [PATCH v3 2/9] fs/fat: introduce new director iterators
Rob Clark
- [U-Boot] [PATCH v2 02/21] part: extract MBR signature from partitions
Rob Clark
- [U-Boot] [PATCH v2 03/21] efi: add some missing __packed
Rob Clark
- [U-Boot] [PATCH v3 3/9] fat/fs: convert to directory iterators
Rob Clark
- [U-Boot] [PATCH v2 04/21] efi: add some more device path structures
Rob Clark
- [U-Boot] [PATCH v3 4/9] fs: add fs_readdir()
Rob Clark
- [U-Boot] [PATCH v2 05/21] efi_loader: add device-path utils
Rob Clark
- [U-Boot] [PATCH v3 5/9] fs/fat: implement opendir/readdir/closedir
Rob Clark
- [U-Boot] [PATCH v2 06/21] efi_loader: drop redundant efi_device_path_protocol
Rob Clark
- [U-Boot] [PATCH v3 6/9] fat/fs: remove a bunch of dead code
Rob Clark
- [U-Boot] [PATCH v2 07/21] efi_loader: flesh out device-path to text
Rob Clark
- [U-Boot] [PATCH v3 7/9] fat/fs: move ls to generic implementation
Rob Clark
- [U-Boot] [PATCH v2 08/21] efi_loader: use proper device-paths for partitions
Rob Clark
- [U-Boot] [PATCH v3 8/9] fs/fat: fix case for FAT shortnames
Rob Clark
- [U-Boot] [PATCH v2 09/21] efi_loader: use proper device-paths for net
Rob Clark
- [U-Boot] [PATCH v3 9/9] fs/fat: Clean up open-coded sector <-> cluster conversions
Rob Clark
- [U-Boot] [PATCH v2 10/21] efi_loader: refactor boot device and loaded_image handling
Rob Clark
- [U-Boot] [PATCH v2 11/21] efi_loader: add file/filesys support
Rob Clark
- [U-Boot] [PATCH v2 12/21] efi_loader: support load_image() from a file-path
Rob Clark
- [U-Boot] [PATCH v2 13/21] efi_loader: make pool allocations cacheline aligned
Rob Clark
- [U-Boot] [PATCH v2 14/21] efi_loader: efi variable support
Rob Clark
- [U-Boot] [PATCH v2 15/21] efi_loader: add bootmgr
Rob Clark
- [U-Boot] [PATCH v2 16/21] efi_loader: file_path should be variable length
Rob Clark
- [U-Boot] [PATCH v2 17/21] efi_loader: set loaded image code/data type properly
Rob Clark
- [U-Boot] [PATCH v2 18/21] efi_loader: print GUIDs
Rob Clark
- [U-Boot] [PATCH v2 19/21] efi_loader: split out escape sequence based size query
Rob Clark
- [U-Boot] [PATCH v2 20/21] efi_loader: Correctly figure out size for vidconsole
Rob Clark
- [U-Boot] [PATCH v2 21/21] efi_loader: Some console improvements for vidconsole
Rob Clark
- [U-Boot] [PATCH v2 00/21] efi_loader: enough UEFI for standard distro boot
Rob Clark
- [U-Boot] [PATCH v1 00/12] efi_loader+video: support for Shell.efi
Rob Clark
- [U-Boot] [PATCH v1 01/12] efi_loader: add stub EFI_DEVICE_PATH_UTILITIES_PROTOCOL
Rob Clark
- [U-Boot] [PATCH v1 02/12] efi_loader: add stub HII protocols
Rob Clark
- [U-Boot] [PATCH v1 03/12] efi_loader: add EFI_UNICODE_COLLATION_PROTOCOL stub
Rob Clark
- [U-Boot] [PATCH v1 04/12] efi_loader: start fleshing out HII
Rob Clark
- [U-Boot] [PATCH v1 05/12] efi_loader: flesh out unicode protocol
Rob Clark
- [U-Boot] [PATCH v1 06/12] efi_loader: start fleshing out efi_device_path_utilities
Rob Clark
- [U-Boot] [PATCH v1 07/12] efi_loader: SIMPLE_TEXT_INPUT_EX plus wire up objects properly
Rob Clark
- [U-Boot] [PATCH v1 08/12] efi_loader: console support for color attributes
Rob Clark
- [U-Boot] [PATCH v1 09/12] dm: video: Fix cache flushes
Rob Clark
- [U-Boot] [PATCH v1 10/12] dm: video: Add basic ANSI escape sequence support
Rob Clark
- [U-Boot] [PATCH v1 11/12] dm: video: Add color ANSI escape sequence support
Rob Clark
- [U-Boot] [PATCH v1 12/12] HACK: efi_loader: hacks for SCT
Rob Clark
- [U-Boot] [PATCH] dm: video: Add basic ANSI escape sequence support
Rob Clark
- [U-Boot] [PATCH] dm: video: Add basic ANSI escape sequence support
Rob Clark
- [U-Boot] [PATCH] efi_loader: Decouple EFI input/output from stdin/stdout
Rob Clark
- [U-Boot] [PATCH v2 2/5] lib: add some utf16 handling helpers
Rob Clark
- [U-Boot] [PATCH] dm: video: Add basic ANSI escape sequence support
Rob Clark
- [U-Boot] [PATCH] lib: strto: fix incorrect handling of specified base
Rob Clark
- [U-Boot] [PATCH v2 05/21] efi_loader: add device-path utils
Rob Clark
- [U-Boot] [PATCH v1 10/12] dm: video: Add basic ANSI escape sequence support
Rob Clark
- [U-Boot] [PATCH v2 14/21] efi_loader: efi variable support
Rob Clark
- [U-Boot] [PATCH] efi_loader: fix events
Rob Clark
- [U-Boot] [PATCH] fs/fat: fix fatbuf leak
Rob Clark
- [U-Boot] [PATCH v3 00/21] efi_loader: enough UEFI for standard distro boot
Rob Clark
- [U-Boot] [PATCH v3 01/21] part: move efi_guid_t
Rob Clark
- [U-Boot] [PATCH v3 02/21] part: extract MBR signature from partitions
Rob Clark
- [U-Boot] [PATCH v3 03/21] efi: add some missing __packed
Rob Clark
- [U-Boot] [PATCH v3 04/21] efi: add some more device path structures
Rob Clark
- [U-Boot] [PATCH v3 05/21] efi_loader: add device-path utils
Rob Clark
- [U-Boot] [PATCH v3 06/21] efi_loader: drop redundant efi_device_path_protocol
Rob Clark
- [U-Boot] [PATCH v3 07/21] efi_loader: flesh out device-path to text
Rob Clark
- [U-Boot] [PATCH v3 08/21] efi_loader: use proper device-paths for partitions
Rob Clark
- [U-Boot] [PATCH v3 09/21] efi_loader: use proper device-paths for net
Rob Clark
- [U-Boot] [PATCH v3 10/21] efi_loader: refactor boot device and loaded_image handling
Rob Clark
- [U-Boot] [PATCH v3 11/21] efi_loader: add file/filesys support
Rob Clark
- [U-Boot] [PATCH v3 12/21] efi_loader: support load_image() from a file-path
Rob Clark
- [U-Boot] [PATCH v3 13/21] efi_loader: make pool allocations cacheline aligned
Rob Clark
- [U-Boot] [PATCH v3 14/21] efi_loader: efi variable support
Rob Clark
- [U-Boot] [PATCH v3 15/21] efi_loader: add bootmgr
Rob Clark
- [U-Boot] [PATCH v3 16/21] efi_loader: file_path should be variable length
Rob Clark
- [U-Boot] [PATCH v3 17/21] efi_loader: set loaded image code/data type properly
Rob Clark
- [U-Boot] [PATCH v3 18/21] efi_loader: print GUIDs
Rob Clark
- [U-Boot] [PATCH v3 19/21] efi_loader: split out escape sequence based size query
Rob Clark
- [U-Boot] [PATCH v3 20/21] efi_loader: Correctly figure out size for vidconsole
Rob Clark
- [U-Boot] [PATCH v3 21/21] efi_loader: Some console improvements for vidconsole
Rob Clark
- [U-Boot] [PATCH 0/3] dm: video: enhancements for Shell.efi
Rob Clark
- [U-Boot] [PATCH 1/3] dm: video: Fix cache flushes
Rob Clark
- [U-Boot] [PATCH 2/3] dm: video: Add basic ANSI escape sequence support
Rob Clark
- [U-Boot] [PATCH 3/3] dm: video: Add color ANSI escape sequence support
Rob Clark
- [U-Boot] [PATCH] test: print_ut: Add test for %ls strings
Rob Clark
- [U-Boot] efi_loader: fix events
Rob Clark
- [U-Boot] efi_loader: queued patches
Rob Clark
- [U-Boot] [U-Boot,v3,03/21] efi: add some missing __packed
Rob Clark
- [U-Boot] efi_loader: queued patches
Rob Clark
- [U-Boot] [PATCH] efi_loader: fix TEST_PROTOCOL case in OpenProtocol()
Rob Clark
- [U-Boot] [U-Boot, v3, 3/9] fat/fs: convert to directory iterators
Rob Clark
- [U-Boot] [PATCH] efi_loader: fix TEST_PROTOCOL case in OpenProtocol()
Rob Clark
- [U-Boot] [U-Boot, v3, 3/9] fat/fs: convert to directory iterators
Rob Clark
- [U-Boot] [U-Boot, v3, 3/9] fat/fs: convert to directory iterators
Rob Clark
- [U-Boot] [U-Boot, v3, 3/9] fat/fs: convert to directory iterators
Rob Clark
- [U-Boot] [PATCH please test] fs/fat: reduce stack usage for SPL
Rob Clark
- [U-Boot] [U-Boot, v3, 3/9] fat/fs: convert to directory iterators
Rob Clark
- [U-Boot] [PATCH 2/3] dm: video: Add basic ANSI escape sequence support
Rob Clark
- [U-Boot] [PATCH 00/10] efi_loader: event services & API test
Rob Clark
- [U-Boot] [PATCH 2/3] dm: video: Add basic ANSI escape sequence support
Rob Clark
- [U-Boot] [PATCH 00/16] efi: Enable basic sandbox support for EFI loader
Rob Clark
- [U-Boot] [PATCH 00/16] efi: Enable basic sandbox support for EFI loader
Rob Clark
- [U-Boot] [PATCH 00/16] efi: Enable basic sandbox support for EFI loader
Rob Clark
- [U-Boot] [PATCH 00/16] efi: Enable basic sandbox support for EFI loader
Rob Clark
- [U-Boot] [PATCH 00/16] efi: Enable basic sandbox support for EFI loader
Rob Clark
- [U-Boot] [PATCH] efi_loader: EFI entry point should be EFIAPI
Rob Clark
- [U-Boot] [PATCH] efi_loader: EFI entry point should be EFIAPI
Rob Clark
- [U-Boot] [PATCH 08/16] sandbox: Add a setjmp() implementation
Rob Clark
- [U-Boot] [PATCH v3 15/21] efi_loader: add bootmgr
Rob Clark
- [U-Boot] [PATCH v3 05/21] efi_loader: add device-path utils
Rob Clark
- [U-Boot] [PATCH 16/23] efi_loader: implement DisconnectController
Rob Clark
- [U-Boot] cmd/bootefi.c:285:3: error: ‘loaded_image_info’ undeclared
Rob Clark
- [U-Boot] [PATCH 1/1] efi_loader: reenable selftest
Rob Clark
- [U-Boot] [PATCH v2 1/1] efi_loader: reenable selftest
Rob Clark
- [U-Boot] [PATCH] efi_loader: fix efi_exit
Rob Clark
- [U-Boot] [PATCH v3 15/21] efi_loader: add bootmgr
Rob Clark
- [U-Boot] FAT filesystems and mtools-created filesystems
Rob Clark
- [U-Boot] [PATCH 1/3] fs-test: Add FAT16 support
Rob Clark
- [U-Boot] [PATCH 3/3] fs-test: Add test for a filename using '..' to go back to the root
Rob Clark
- [U-Boot] [PATCH 1/2] video: test: Helper for writing strings
Rob Clark
- [U-Boot] [PATCH 2/2] video: test: Add ANSI escape sequence tests
Rob Clark
- [U-Boot] [PATCH] usb: kbd: Don't fail with iomux
Rob Clark
- [U-Boot] [PATCH 0/3] dm: video: enhancements for Shell.efi
Rob Clark
- [U-Boot] [PATCH] dm: video: make ANSI escape sequence support optional
Rob Clark
- [U-Boot] [PATCH] cmd: usb: check usb_stor_curr_dev in usb dev with no parameter
Patrick DELAUNAY
- [U-Boot] [PATCH v2] cmd: usb: add check on usb_stor_curr_dev in usb dev command
Patrick DELAUNAY
- [U-Boot] [PATCH] armv8: Remove dependency of SERDES for LS CHASIS3
Sriram Dash
- [U-Boot] [PATCH] armv8: fsl: ifc: Put IFC related code under CONFIG_FSL_IFC
Sriram Dash
- [U-Boot] [PATCH] armv8: fsl: i2c: Put I2C related code under CONFIG_SYS_I2C
Sriram Dash
- [U-Boot] [PATCH] armv8: Remove dependency of SERDES for LS CHASIS3
Sriram Dash
- [U-Boot] [PATCH 4/8] clk: rockchip: Add Saradc clock support for rk3288
David.Wu
- [U-Boot] [PATCH 2/8] configs: rockchip: Enable the ROCKCHIP_SARADC config
David.Wu
- [U-Boot] [U-Boot,1/8] adc: Add driver for Rockchip Saradc
David.Wu
- [U-Boot] [U-Boot, 6/8] clk: rockchip: Add rk3368 Saradc clock support
David.Wu
- [U-Boot] [PATCH] rockchip: imply ADC and SARADC_ROCKCHIP on supported SoCs
David.Wu
- [U-Boot] [PATCH] rockchip: imply ADC and SARADC_ROCKCHIP on supported SoCs
David.Wu
- [U-Boot] [PATCH] arm: mach-omap2: Relax checks on OP-TEE location to allow pageable image
Andrew F. Davis
- [U-Boot] [PATCH v2] defconfigs: Add a config for AM335x High Security EVM with UART Boot support
Andrew F. Davis
- [U-Boot] [PATCH] arm: am33xx: security: adds auth support for encrypted images
Andrew F. Davis
- [U-Boot] [PATCH] configs: am43xx_evm: Avoid relocation onto firewall at the end of DRAM
Andrew F. Davis
- [U-Boot] [PATCH] defconfigs: Add a config for AM43xx High Security EVM with QSPI Boot support
Andrew F. Davis
- [U-Boot] [PATCH] configs: k2g_evm: Make findfdt command populate fdtfile variable
Andrew F. Davis
- [U-Boot] [PATCH] MAINTAINERS: board: qcom: db410c: Maintainer changed
Nicolas Dechesne
- [U-Boot] [PATCH v2] cmd: usb: add check on usb_stor_curr_dev in usb dev command
Patrick Delaunay
- [U-Boot] [PATCH] cmd: set filesize variable in ubi read
Holger Dengler
- [U-Boot] [PATCH v1] cmd: set filesize variable in ubi read
Holger Dengler
- [U-Boot] [RESEND PATCH v2] cmd: set filesize variable in ubi read
Holger Dengler
- [U-Boot] [ANN] U-Boot v2017.09 is released
Wolfgang Denk
- [U-Boot] [PATCH 00/13] log: Add a new logging feature
Wolfgang Denk
- [U-Boot] [PATCH 0/5] Follow the Linux Kernel in building dtc as needed
Wolfgang Denk
- [U-Boot] strange behaviors with setexpr syntax error and '==' != '-eq"
Wolfgang Denk
- [U-Boot] [PATCH 0/5] REVERT Follow the Linux Kernel in building dtc as needed
Wolfgang Denk
- [U-Boot] [PATCH 1/5] Revert "tools/mkimage: Make the path to the dtc binary that mkimage calls configurable"
Wolfgang Denk
- [U-Boot] [PATCH 2/5] Revert "dtc: Switch to building and using our own dtc unless provided"
Wolfgang Denk
- [U-Boot] [PATCH 3/5] Revert "scripts/dtc: Update to upstream version v1.4.4-50-gfe50bd1ecc1d"
Wolfgang Denk
- [U-Boot] [PATCH 4/5] Revert "scripts/dtc: Update to upstream version v1.4.4"
Wolfgang Denk
- [U-Boot] [PATCH 5/5] Revert "scripts/dtc: Update to upstream version v1.4.3"
Wolfgang Denk
- [U-Boot] [PATCH 0/5] REVERT Follow the Linux Kernel in building dtc as needed
Wolfgang Denk
- [U-Boot] [PATCH 002/080] mpc83xx: spd_sdram: Fix whitespace style violations
Wolfgang Denk
- [U-Boot] [PATCH v2 0/5] rk3288: Falcon mode support
Chakra Divi
- [U-Boot] [PATCH v2 1/5] armv7: Move L2CTLR read/write to common
Chakra Divi
- [U-Boot] [PATCH v2 2/5] armv7: rk3288: Move configure_l2ctlr to common
Chakra Divi
- [U-Boot] [PATCH v2 3/5] rk3288: vyasa: Add TPL support
Chakra Divi
- [U-Boot] [PATCH v2 4/5] rk3288: vyasa: Add falcon mode support
Chakra Divi
- [U-Boot] [PATCH v2 5/5] rk3288: spl: Add dram_init_banksize
Chakra Divi
- [U-Boot] [PATCH 1/2] icore: configs: Fix merge conflict issue
Chakra Divi
- [U-Boot] [PATCH 2/2] icorem6_rqs: env: Return mmc devno
Chakra Divi
- [U-Boot] [PATCH] Remove "no previous prototype" warning
Diego Dorta
- [U-Boot] [PATCH v2] imx: sys_proto: Add a prototype for board_mmc_get_env_dev()
Diego Dorta
- [U-Boot] [PATCH] imx: Include <input.h> header file
Diego Dorta
- [U-Boot] Issues with mx6 (cubox/wandboard) with 2017.09
Diego Dorta
- [U-Boot] [PATCH 1/4] mx6: soc: Include <asm/bootm.h> header file
Diego Dorta
- [U-Boot] [PATCH 2/4] mx6sabresd: Include <asm/mach-imx/spi.h> header file
Diego Dorta
- [U-Boot] [PATCH 3/4] usb: ehci-ci: Add a prototype for board_ehci_power()
Diego Dorta
- [U-Boot] [PATCH 4/4] mx6sabresd: Include <usb/ehci-ci.h> header file
Diego Dorta
- [U-Boot] Fix for SHA256 Password Bug
Charles Eidsness
- [U-Boot] [PATCH v2 0/8] imx: add USB Serial Download Protocol (SDP) support
Fabio Estevam
- [U-Boot] [PATCH v2 0/8] imx: add USB Serial Download Protocol (SDP) support
Fabio Estevam
- [U-Boot] [PATCH v2 0/8] imx: add USB Serial Download Protocol (SDP) support
Fabio Estevam
- [U-Boot] [RFC] toradex: imx6: Move g_dnl_bind_fixup() into common SPL code
Fabio Estevam
- [U-Boot] [PATCH] crypto/fsl: fix obj-yy in Makefile
Fabio Estevam
- [U-Boot] [PATCH v1 1/2] imx: add macro to detect whether USB has been initialized
Fabio Estevam
- [U-Boot] [PATCH v1 2/2] imx_common: detect USB serial downloader reliably
Fabio Estevam
- [U-Boot] [U-Boot,2/3] imx: mx6: correct IPU clock
Fabio Estevam
- [U-Boot] video: ipu_common: fix build error
Fabio Estevam
- [U-Boot] [PATCH v1 1/2] imx: add macro to detect whether USB has been initialized
Fabio Estevam
- [U-Boot] [PATCH v1 1/2] imx: add macro to detect whether USB has been initialized
Fabio Estevam
- [U-Boot] [PATCH v1 1/2] imx: add macro to detect whether USB has been initialized
Fabio Estevam
- [U-Boot] [PATCH v1 1/2] imx: add macro to detect whether USB has been initialized
Fabio Estevam
- [U-Boot] [RFC] toradex: imx6: Move g_dnl_bind_fixup() into common SPL code
Fabio Estevam
- [U-Boot] [PATCH 1/2] toradex: imx6: Move g_dnl_bind_fixup() into common SPL code
Fabio Estevam
- [U-Boot] [PATCH 2/2] mx6sabresd: Add Serial Download Protocol support
Fabio Estevam
- [U-Boot] [RFC] ipu_common: Let the MX6 IPU clock be calculated in run-time
Fabio Estevam
- [U-Boot] [U-Boot,2/3] imx: mx6: correct IPU clock
Fabio Estevam
- [U-Boot] [PATCH] ipu_common: Let the MX6 IPU clock be calculated in run-time
Fabio Estevam
- [U-Boot] [PATCH v2 2/2] imx_common: detect USB serial downloader reliably
Fabio Estevam
- [U-Boot] [PATCH] ipu_common: Let the MX6 IPU clock be calculated in run-time
Fabio Estevam
- [U-Boot] [PATCH] MAINTAINERS: board: qcom: db410: Maintainer changed
Fabio Estevam
- [U-Boot] [PATCH] sf: bar: Clean BA24 Bank Address Register bit after read/write/erase operation
Fabio Estevam
- [U-Boot] [PATCH v3 1/2] imx: add macro to detect whether USB PHY is active
Fabio Estevam
- [U-Boot] [PATCH] mx53loco: Let CONFIG_DISPLAY_CPUINFO be selected
Fabio Estevam
- [U-Boot] [PATCH] imx6: disable clock command and print_cpuinfo code in SPL
Fabio Estevam
- [U-Boot] [PATCH] README.imx6: Prefer loading SPL via the new SDP mechanism
Fabio Estevam
- [U-Boot] [PATCH 1/2] wandboard: Add support for the latest revd1 revision
Fabio Estevam
- [U-Boot] [PATCH 2/2] wandboard: Add support for the MX6QP variant
Fabio Estevam
- [U-Boot] [PATCH v2 1/2] wandboard: Add support for the latest revd1 revision
Fabio Estevam
- [U-Boot] [PATCH v2 2/2] wandboard: Add support for the MX6QP variant
Fabio Estevam
- [U-Boot] [PATCH] Remove "no previous prototype" warning
Fabio Estevam
- [U-Boot] [PATCH v2] imx: sys_proto: Add a prototype for board_mmc_get_env_dev()
Fabio Estevam
- [U-Boot] [PATCH] imx: Include <input.h> header file
Fabio Estevam
- [U-Boot] [PATCH] imx6: disable clock command and print_cpuinfo code in SPL
Fabio Estevam
- [U-Boot] [PATCH 1/6] mx6sabresd: Avoid calling setup_display() from SPL code
Fabio Estevam
- [U-Boot] [PATCH 2/6] cgtqmx6eval: Avoid calling setup_display() from SPL code
Fabio Estevam
- [U-Boot] [PATCH 3/6] wandboard: Avoid calling setup_display() from SPL code
Fabio Estevam
- [U-Boot] [PATCH 4/6] mx6cuboxi: Avoid calling setup_display() from SPL code
Fabio Estevam
- [U-Boot] [PATCH 5/6] apalis_imx6: Avoid calling setup_display() from SPL code
Fabio Estevam
- [U-Boot] [PATCH 6/6] colibri_imx6: Avoid calling setup_display() from SPL code
Fabio Estevam
- [U-Boot] [PATCH 5/6] apalis_imx6: Avoid calling setup_display() from SPL code
Fabio Estevam
- [U-Boot] [PATCH 5/6] apalis_imx6: Avoid calling setup_display() from SPL code
Fabio Estevam
- [U-Boot] [PATCH 3/4] imx: mx7: SPL support for i.MX7
Fabio Estevam
- [U-Boot] [PATCH] mx6: toradex: Remove custom CONFIG_SPL_PAD_TO definition
Fabio Estevam
- [U-Boot] Issues with mx6 (cubox/wandboard) with 2017.09
Fabio Estevam
- [U-Boot] [PATCH 0/4] cl-som-imx7: initial support
Fabio Estevam
- [U-Boot] [PATCH v2 2/2] wandboard: Add support for the MX6QP variant
Fabio Estevam
- [U-Boot] Issues with mx6 (cubox/wandboard) with 2017.09
Fabio Estevam
- [U-Boot] imx6qp wandboard getting stuck in U-Boot
Fabio Estevam
- [U-Boot] imx6qp wandboard getting stuck in U-Boot
Fabio Estevam
- [U-Boot] [PATCH v3 1/2] wandboard: Add support for the latest revd1 revision
Fabio Estevam
- [U-Boot] [PATCH v3 2/2] wandboard: Add support for the MX6QP variant
Fabio Estevam
- [U-Boot] imx6qp wandboard getting stuck in U-Boot
Fabio Estevam
- [U-Boot] [PATCH] mx7ulp_evk: Move CONFIG_CMD_BOOTZ to Kconfig
Fabio Estevam
- [U-Boot] Ethernet problem with u-boot for APF27
Fabio Estevam
- [U-Boot] [PATCH] ls1021aiot: Move CONFIG_CMD_BOOTZ to Kconfig
Fabio Estevam
- [U-Boot] [PATCH] topic_miami: Remove CONFIG_CMD_BOOTZ undef
Fabio Estevam
- [U-Boot] fsl_esdhc driver is broken with DM
Fabio Estevam
- [U-Boot] video: ipu_common: fix build error
Peng Fan
- [U-Boot] [U-Boot,2/3] imx: mx6: correct IPU clock
Peng Fan
- [U-Boot] [PATCH V4 01/12] scripts: spl: fix typo
Peng Fan
- [U-Boot] [PATCH V4 11/12] imx: mx6sabresd: enable dm drivers
Peng Fan
- [U-Boot] [PATCH] mx7ulp_evk: Move CONFIG_CMD_BOOTZ to Kconfig
Peng Fan
- [U-Boot] [PATCH V4 11/12] imx: mx6sabresd: enable dm drivers
Peng Fan
- [U-Boot] [PATCH] i2c: muxes: pca954x: Add support for GPIO reset line
Moritz Fischer
- [U-Boot] [PATCH] i2c: muxes: pca954x: Add support for GPIO reset line
Moritz Fischer
- [U-Boot] [PATCH v2] i2c: muxes: pca954x: Add support for GPIO reset line
Moritz Fischer
- [U-Boot] [PATCH v3] i2c: muxes: pca954x: Add support for GPIO reset line
Moritz Fischer
- [U-Boot] [OE-core] [PATCH] u-boot: Upgrade to 2017.09
Moritz Fischer
- [U-Boot] [PATCH 1/3] arm: dts: da850: Migrate da850-evm DTS files from Linux 4.13-RC5
Adam Ford
- [U-Boot] DA850evm SPI Flash Partitions between Linux and U-boot are Inconsistent
Adam Ford
- [U-Boot] [Patch V2 0/4] Migrate DA850-evm to Driver Model
Adam Ford
- [U-Boot] [Patch V2 1/4] spi: davinci_spi: Add da830-spi support for DM
Adam Ford
- [U-Boot] [Patch V2 2/4] arm: da850-evm: Enable DM and device tree support for da850-evm
Adam Ford
- [U-Boot] [Patch V2 3/4] arm: da850-evm: Enable MTD Parts
Adam Ford
- [U-Boot] [Patch V2 4/4] ARM: da850-evm: Enable DM_I2C
Adam Ford
- [U-Boot] [PATCH V4] Convert CONFIG_NAND_OMAP_GPMC et al to Kconfig
Adam Ford
- [U-Boot] [U-Boot, V3] Convert CONFIG_NAND_OMAP_GPMC et al to Kconfig
Adam Ford
- [U-Boot] [PATCH] Convert CONFIG_NAND_OMAP_ECCSCHEME to Kconfig
Adam Ford
- [U-Boot] [PATCH 1/2] Fix boards missing CONFIG_NAND after Kconfig migration
Adam Ford
- [U-Boot] [PATCH 2/2] Convert CONFIG_SYS_NAND_ECCSIZE et al to Kconfig
Adam Ford
- [U-Boot] [PATCH] Configs: Rename MTDIDS_DEFAULT and MTDPARTS_DEFAULT
Adam Ford
- [U-Boot] [PATCH] include/configs: remove references to SMNAND_ENV_OFFSET
Adam Ford
- [U-Boot] CONFIG_ENV_ADDR vs CONFIG_ENV_OFFSET
Adam Ford
- [U-Boot] [PATCH 1/2] net: Add SMC911X driver to Kconfig
Adam Ford
- [U-Boot] [PATCH 2/2] arm: omap3_logic: Migrate SMC911X to Kconfig
Adam Ford
- [U-Boot] [PATCH V2 1/2] ARM: OMAP3: am3517_evm: Move header to ti_omap3_common.h
Adam Ford
- [U-Boot] [PATCH V2 2/2] omap3: am3517_evm: Enable TI_COMMON_CMD_OPTION
Adam Ford
- [U-Boot] [PATCH V3 1/5] arm: dts: da850: Migrate da850-evm DTS files from Linux 4.13-RC5
Adam Ford
- [U-Boot] [PATCH V3 2/5] spi: davinci_spi: Add da830-spi support for DM
Adam Ford
- [U-Boot] [PATCH V3 3/5] arm: da850-evm: Enable DM and device tree support for da850-evm
Adam Ford
- [U-Boot] [PATCH V3 4/5] arm: da850-evm: Enable MTD Parts
Adam Ford
- [U-Boot] [PATCH V3 5/5] ARM: da850-evm: Enable DM_I2C
Adam Ford
- [U-Boot] [PATCH 1/2] davinci: da850evm: Make EEPROM MAC code configurable
Adam Ford
- [U-Boot] [PATCH 2/2] Convert CONFIG_MAC_ADDR_IN_SPIFLASH et al to Kconfig
Adam Ford
- [U-Boot] [PATCH] dm: gpio: Add DM compatibilty to GPIO driver for Davinci
Adam Ford
- [U-Boot] DA850EVM Maintainers (abandoned?)
Adam Ford
- [U-Boot] [PATCH] Convert CONFIG_EMIF4 et al to Kconfig
Adam Ford
- [U-Boot] [PATCH] ARM: davinci: Update da8xxevm Maintainers
Adam Ford
- [U-Boot] [PATCH] ARM: davinci: Update da8xxevm Maintainers
Adam Ford
- [U-Boot] [PATCH V2] dm: gpio: Add DM compatibilty to GPIO driver for Davinci
Adam Ford
- [U-Boot] [PATCH] ARM: davinci: Remove CONFIG_SOC_DA830
Adam Ford
- [U-Boot] [U-Boot, v3, 3/9] fat/fs: convert to directory iterators
Adam Ford
- [U-Boot] [PATCH V2] dm: gpio: Add DM compatibilty to GPIO driver for Davinci
Adam Ford
- [U-Boot] [U-Boot, v3, 3/9] fat/fs: convert to directory iterators
Adam Ford
- [U-Boot] [U-Boot, v3, 3/9] fat/fs: convert to directory iterators
Adam Ford
- [U-Boot] [PATCH please test] fs/fat: reduce stack usage for SPL
Adam Ford
- [U-Boot] [U-Boot, v3, 3/9] fat/fs: convert to directory iterators
Adam Ford
- [U-Boot] [PATCH V4 0/5] Update DA850 to Device tree, SPI MTDPARTS, and DM
Adam Ford
- [U-Boot] [PATCH V4 1/5] arm: dts: da850: Migrate da850-evm DTS files from Linux 4.13-RC5
Adam Ford
- [U-Boot] [PATCH V4 2/5] spi: davinci_spi: Add da830-spi support for DM
Adam Ford
- [U-Boot] [PATCH V4 3/5] arm: da850-evm: Enable DM and device tree support for da850-evm
Adam Ford
- [U-Boot] [PATCH V4 4/5] arm: da850-evm: Enable MTD Parts in SPI Flash
Adam Ford
- [U-Boot] [PATCH V4 5/5] ARM: da850-evm: Enable DM_I2C
Adam Ford
- [U-Boot] [PATCH 1/2] arm: dts: am3517_evm: Sync DTS files with Linux 4.13-RC5
Adam Ford
- [U-Boot] [PATCH 2/2] ARM: omap3: am3517-evm: Add device tree and DM support
Adam Ford
- [U-Boot] [PATCH V4 1/5] arm: dts: da850: Migrate da850-evm DTS files from Linux 4.13-RC5
Adam Ford
- [U-Boot] [UBOOT] [PATCH] cmd: usb: ignore block devices under mass storage device
Suneel Garapati
- [U-Boot] [UBOOT] [PATCH] cmd: usb: ignore block devices under mass storage device
Suneel Garapati
- [U-Boot] [U-BOOT][PATCH] drivers: ahci: write upper 32 bits for clb and fis registers
Suneel Garapati
- [U-Boot] [PATCH v1] drivers: ahci: write upper 32 bits for clb and fis registers
Suneel Garapati
- [U-Boot] [PATCH v1] cmd: usb: add blk devices to ignore list in tree graph
Suneel Garapati
- [U-Boot] [PATCH v1] cmd: usb: add blk devices to ignore list in tree graph
Suneel Garapati
- [U-Boot] [PATCH v2] cmd: usb: add blk devices to ignore list in tree graph
Suneel Garapati
- [U-Boot] [PATCH v3] cmd: usb: add blk devices to ignore list in tree graph
Suneel Garapati
- [U-Boot] [PATCH v2] cmd: usb: add blk devices to ignore list in tree graph
Suneel Garapati
- [U-Boot] [PATCH v3] cmd: usb: add blk devices to ignore list in tree graph
Suneel Garapati
- [U-Boot] [PATCH v3] cmd: usb: add blk devices to ignore list in tree graph
Suneel Garapati
- [U-Boot] [PATCH v4] cmd: usb: add blk devices to ignore list in tree graph
Suneel Garapati
- [U-Boot] [PATCH v3] cmd: usb: add blk devices to ignore list in tree graph
Suneel Garapati
- [U-Boot] [PATCH v4] cmd: usb: add blk devices to ignore list in tree graph
Suneel Garapati
- [U-Boot] [PATCH v5] cmd: usb: add blk, emulation devices to ignore list as needed
Suneel Garapati
- [U-Boot] [PATCH 1/2] armv8: layerscape: Allocate 66 MB DDR for secure memory
Sumit Garg
- [U-Boot] [PATCH 2/2] armv8: sec_firmware: Add support for loadables in FIT
Sumit Garg
- [U-Boot] [PATCH] arm64: ls1043ardb: Add distro secure boot support
Sumit Garg
- [U-Boot] [Patch v2] configs: SECURE_BOOT: Enable CONFIG_CMD_EXT4_WRITE
Sumit Garg
- [U-Boot] [Patch v2] configs: SECURE_BOOT: Enable CONFIG_CMD_EXT4_WRITE
Sumit Garg
- [U-Boot] [PATCH] arm64: ls1012ardb: Add distro secure boot support
Sumit Garg
- [U-Boot] How to bring in support for GnuBee on MediaTek MT7621A
Niklaus Giger
- [U-Boot] [PATCH 01/23] efi_loader: allow return value in EFI_CALL
Simon Glass
- [U-Boot] Please pull u-boot-dm
Simon Glass
- [U-Boot] [PATCH v2 1/2] env: Fix operation of 'make environ'
Simon Glass
- [U-Boot] [PATCH v2 2/2] env: Add 'envtools' target to 'make help'
Simon Glass
- [U-Boot] [PATCH] env: Fix operation of 'make environ'
Simon Glass
- [U-Boot] [PATCH 1/3] GPT: create block device for sandbox testing
Simon Glass
- [U-Boot] [PATCH 3/3] add pytests for 'gpt rename' and 'gpt swap'
Simon Glass
- [U-Boot] [ANN] U-Boot v2017.09-rc4 released
Simon Glass
- [U-Boot] [PATCH 00/23] efi_loader implement missing functions
Simon Glass
- [U-Boot] [PATCH v2 1/8] fs/fat: split out helper to init fsdata
Simon Glass
- [U-Boot] [PATCH v2 2/8] fs/fat: introduce new director iterators
Simon Glass
- [U-Boot] [PATCH v2 3/8] fat/fs: convert to directory iterators
Simon Glass
- [U-Boot] [PATCH v2 4/8] fs: add fs_readdir()
Simon Glass
- [U-Boot] [PATCH v2 5/8] fs/fat: implement opendir/readdir/closedir
Simon Glass
- [U-Boot] [PATCH v2 6/8] fat/fs: remove a bunch of dead code
Simon Glass
- [U-Boot] [PATCH v2 7/8] fat/fs: move ls to generic implementation
Simon Glass
- [U-Boot] [PATCH v2 8/8] fs/fat: fix case for FAT shortnames
Simon Glass
- [U-Boot] [PATCH v2 1/4] blk: Use macros for block device vendor/product/rev string size
Simon Glass
- [U-Boot] [PATCH v2 2/4] block: ide: Fix block read/write with driver model
Simon Glass
- [U-Boot] [PATCH v2 3/4] block: ide: Don't bother to create BLK device if no CDROM inserted
Simon Glass
- [U-Boot] [PATCH v2 4/4] cmd: ide: Make the first device the default one
Simon Glass
- [U-Boot] [PATCH] gitignore: add intermediates from libfdt build
Simon Glass
- [U-Boot] [PATCH v2 3/6] dm: x86: Update timer_get_boot_us to work before DM is ready
Simon Glass
- [U-Boot] [PATCH 11/13] x86: braswell: Add FSP configuration
Simon Glass
- [U-Boot] [PATCH 5/5] x86: fsp: Configure SPI opcode registers before SPI is locked down
Simon Glass
- [U-Boot] [PATCH v3 0/6] x86: bootstage: Fix bootstage operation on link
Simon Glass
- [U-Boot] [PATCH v3 1/6] board_f: Drop the timer after relocation
Simon Glass
- [U-Boot] [PATCH v3 2/6] dm: x86: Allow TSC timer to be used before DM is ready
Simon Glass
- [U-Boot] [PATCH v3 3/6] dm: x86: Update timer_get_boot_us to work before DM is ready
Simon Glass
- [U-Boot] [PATCH v3 4/6] bootstage: Drop unused options
Simon Glass
- [U-Boot] [PATCH v3 5/6] bootstage: Provide a separate record count setting for SPL
Simon Glass
- [U-Boot] [PATCH v3 6/6] x86: Enable early timer for chromebook_link
Simon Glass
- [U-Boot] [PATCH] Revert "dm: arm: rpi: Drop CONFIG_OF_EMBED"
Simon Glass
- [U-Boot] [PATCH 2/2] rockchip: ram: rk3399: update reg map for of-platdata
Simon Glass
- [U-Boot] [PATCH v4 1/3] board: atmel: Create board/$(VENDOR)/common folder
Simon Glass
- [U-Boot] [PATCH v4 2/3] board: sama5d2_xplained: Replace code to set mac address
Simon Glass
- [U-Boot] [PATCH v4 3/3] board: sama5d4_xplained: Set mac address from eeprom
Simon Glass
- [U-Boot] [PATCH 2/2] rockchip: rk3368: add the missing target and pinctrl config for sheep board
Simon Glass
- [U-Boot] [PATCH v5 1/1] mmc: Add MMC support for stm32h7 Socs
Simon Glass
- [U-Boot] [PATCH v3 2/2] dm: test: replace dm_scan_dt() by of dm_extended_scan_fdt() in dm_do_test
Simon Glass
- [U-Boot] [PATCH v3 01/14] Introduce fdt_setprop_placeholder() method
Simon Glass
- [U-Boot] [PATCH v3 02/14] fdt: Introduce helper method fdt_overlay_apply_verbose()
Simon Glass
- [U-Boot] [PATCH v3 03/14] fdt: Switch to using the verbose overlay application method
Simon Glass
- [U-Boot] [PATCH v3 04/14] fdt: Allow stacked overlays phandle references
Simon Glass
- [U-Boot] [PATCH v3 05/14] fit: Allow multiple images per property
Simon Glass
- [U-Boot] [PATCH v3 06/14] fit: Do not throw away extra configuration on fit_image_load()
Simon Glass
- [U-Boot] [PATCH v3 07/14] fit: Introduce methods for applying overlays on fit-load
Simon Glass
- [U-Boot] [PATCH v3 08/14] fit: fdt overlays doc
Simon Glass
- [U-Boot] [PATCH v3 09/14] doc: Document how to apply fdt overlays
Simon Glass
- [U-Boot] [PATCH v3 10/14] doc: overlays: Tweak documentation regarding overlays
Simon Glass
- [U-Boot] [PATCH v3 11/14] dtbo: make dtbos special
Simon Glass
- [U-Boot] [PATCH v3 12/14] config: sandbox: Add unit tests
Simon Glass
- [U-Boot] [PATCH v3 13/14] ut: fix fdt_getprop_u32() change
Simon Glass
- [U-Boot] [PATCH v3 14/14] test: overlay: Add unit test for stacked overlay
Simon Glass
- [U-Boot] [PATCH 1/3] efi_loader: rename __efi_hello_world_*
Simon Glass
- [U-Boot] [PATCH 2/3] scripts/Makefile.lib: generalize building built in EFI app
Simon Glass
- [U-Boot] [PATCH 3/3] efi_loader: usage of always in Makefile
Simon Glass
- [U-Boot] [PATCH 3/3] rockchip: evb-rv1108: add usb init function for dwc2 gadget
Simon Glass
- [U-Boot] [PATCH v10 05/10] STiH410-B2260: enable USB Host Networking
Simon Glass
- [U-Boot] [U-Boot,v2,2/5] rockchip: rk322x: add sdram driver
Simon Glass
- [U-Boot] [PATCH v2 2/8] fs/fat: introduce new director iterators
Simon Glass
- [U-Boot] [PATCH v3 1/2] dm: core: add clocks node scan
Simon Glass
- [U-Boot] [PATCH] i2c: muxes: pca954x: Add support for GPIO reset line
Simon Glass
- [U-Boot] USB Ethernet with device model
Simon Glass
- [U-Boot] [PATCH 01/10] lib: add TPL_OF_LIBFDT option for TPL
Simon Glass
- [U-Boot] [PATCH 02/10] arm: add option for TPL support in arm 32bit
Simon Glass
- [U-Boot] [PATCH 03/10] arm: add a separate stack for TPL
Simon Glass
- [U-Boot] [PATCH 04/10] rockchip: rk322x: enable tpl support
Simon Glass
- [U-Boot] [PATCH 05/10] sysreset: enable driver support in SPL/TPL
Simon Glass
- [U-Boot] [PATCH 06/10] spl: add support to booting with OP-TEE
Simon Glass
- [U-Boot] [PATCH 07/10] rockchip: rk322x: dts: enable uart2 for SPL/TPL
Simon Glass
- [U-Boot] [PATCH 08/10] rockchip: evb-rk3229: add fit source file for itb
Simon Glass
- [U-Boot] [PATCH 09/10] rockchip: evb-rk3229: add README file for OP-TEE support
Simon Glass
- [U-Boot] [PATCH 10/10] rockchip: evb-rk322x: update defconfig with tpl and optee support
Simon Glass
- [U-Boot] [PATCH v2] misc: Kconfig: Add SPL_I2C_EEPROM option
Simon Glass
- [U-Boot] [PATCH v1] drivers: ahci: write upper 32 bits for clb and fis registers
Simon Glass
- [U-Boot] [PATCH v1] cmd: usb: add blk devices to ignore list in tree graph
Simon Glass
- [U-Boot] [PATCH] dm: video: Add basic ANSI escape sequence support
Simon Glass
- [U-Boot] [PATCH] dm: video: Add basic ANSI escape sequence support
Simon Glass
- [U-Boot] [PATCH v2 04/19] dm: core: add dev_read_addr_ptr()
Simon Glass
- [U-Boot] [PATCH v3 06/19] net: phy: micrel: Convert to livetree
Simon Glass
- [U-Boot] Please pull u-boot-dm
Simon Glass
- [U-Boot] [PATCH 1/1] x86: ivybridge: remove unused variables
Simon Glass
- [U-Boot] [PATCH] lib: strto: fix incorrect handling of specified base
Simon Glass
- [U-Boot] [PATCH 02/13] usb: gadget: Move USBNET_HOST_ADDR to Kconfig
Simon Glass
- [U-Boot] [PATCH 01/13] usb: gadget: Move USBNET_DEVADDR option out of g_dnl
Simon Glass
- [U-Boot] [PATCH 03/13] usb: gadget: Convert USB_ETHER to Kconfig
Simon Glass
- [U-Boot] [PATCH 04/13] usb: gadget: usb_ether: Move the interfaces to Kconfig
Simon Glass
- [U-Boot] [PATCH 05/13] usb: gadget: Make g_dnl USB settings common
Simon Glass
- [U-Boot] [PATCH 06/13] usb: gadget: usb_ether: Move settings to common
Simon Glass
- [U-Boot] [PATCH 07/13] sunxi: provide default USB gadget setup
Simon Glass
- [U-Boot] [PATCH 08/13] sunxi: imply USB_GADGET
Simon Glass
- [U-Boot] [PATCH 09/13] cmd: fastboot: Rework fastboot dependency
Simon Glass
- [U-Boot] [PATCH 10/13] musb: sunxi: switch to the device model
Simon Glass
- [U-Boot] [PATCH 11/13] sunxi: Register usb_ether
Simon Glass
- [U-Boot] [PATCH 12/13] sunxi: Imply USB_ETHER
Simon Glass
- [U-Boot] [PATCH 13/13] sunxi: sina33: Sync the device tree with the kernel
Simon Glass
- [U-Boot] Enc: Uboot compatible with board Tegra124-nyan-big (ChromeBook G3 HP 14")
Simon Glass
- [U-Boot] [PATCH] i2c: muxes: pca954x: Add support for GPIO reset line
Simon Glass
- [U-Boot] [PATCH v2 4/5] vsprintf.c: add GUID printing
Simon Glass
- [U-Boot] [PATCH v2 3/5] vsprintf.c: add UTF-16 string (%ls) support
Simon Glass
- [U-Boot] [PATCH v3 3/9] fat/fs: convert to directory iterators
Simon Glass
- [U-Boot] [PATCH v3 4/9] fs: add fs_readdir()
Simon Glass
- [U-Boot] [PATCH v3 5/9] fs/fat: implement opendir/readdir/closedir
Simon Glass
- [U-Boot] [PATCH v3 8/9] fs/fat: fix case for FAT shortnames
Simon Glass
- [U-Boot] [PATCH v3 9/9] fs/fat: Clean up open-coded sector <-> cluster conversions
Simon Glass
- [U-Boot] [PATCH 1/2] GPT: create block device for sandbox testing
Simon Glass
- [U-Boot] [PATCH 2/2] add pytests for 'gpt guid' command in sandbox
Simon Glass
- [U-Boot] [PATCH 1/1] add pytests for 'gpt rename' and 'gpt swap'
Simon Glass
- [U-Boot] [PATCH v3 2/9] fs/fat: introduce new director iterators
Simon Glass
- [U-Boot] USB Ethernet with device model
Simon Glass
- [U-Boot] [PATCH v2 01/21] part: move efi_guid_t
Simon Glass
- [U-Boot] [PATCH v2 02/21] part: extract MBR signature from partitions
Simon Glass
- [U-Boot] [PATCH v2 03/21] efi: add some missing __packed
Simon Glass
- [U-Boot] [PATCH v2 04/21] efi: add some more device path structures
Simon Glass
- [U-Boot] [PATCH v2 05/21] efi_loader: add device-path utils
Simon Glass
- [U-Boot] [PATCH v1 10/12] dm: video: Add basic ANSI escape sequence support
Simon Glass
- [U-Boot] [PATCH v2 11/21] efi_loader: add file/filesys support
Simon Glass
- [U-Boot] [PATCH v2 14/21] efi_loader: efi variable support
Simon Glass
- [U-Boot] [PATCH v2 15/21] efi_loader: add bootmgr
Simon Glass
- [U-Boot] [PATCH v2 21/21] efi_loader: Some console improvements for vidconsole
Simon Glass
- [U-Boot] [PATCH 2/2] rockchip: ram: rk3399: update reg map for of-platdata
Simon Glass
- [U-Boot] [PATCH] rockchip: rk3399: spl: remove hard-coded addresses for GRF and SGRF
Simon Glass
- [U-Boot] [PATCH v2] i2c: muxes: pca954x: Add support for GPIO reset line
Simon Glass
- [U-Boot] [PATCH v4 8/9] spl: dm: Make it possible for the SPL to pick its own DTB from a FIT
Simon Glass
- [U-Boot] [PATCH] patman: Fix error when the email blacklist is missing
Simon Glass
- [U-Boot] [PATCH 11/13] x86: braswell: Add FSP configuration
Simon Glass
- [U-Boot] [PATCH 5/5] x86: fsp: Configure SPI opcode registers before SPI is locked down
Simon Glass
- [U-Boot] [PATCH] rockchip: rk3399: spl: convert to using BOOT_DEVICE_BOOTROM
Simon Glass
- [U-Boot] [PATCH v2 15/19] rockchip: i2c: Convert to livetree
Simon Glass
- [U-Boot] patman complains "ConfigParser.NoSectionError: No section: 'bounces'"
Simon Glass
- [U-Boot] [PATCH 01/10] rockchip: rk3399: make spl_board_init board-specific
Simon Glass
- [U-Boot] [PATCH 02/10] rockchip: bootrom: add definitions to retrieve BROM boot-source
Simon Glass
- [U-Boot] [PATCH 03/10] rockchip: spl: add documentation for spl_node_to_boot_device()
Simon Glass
- [U-Boot] [PATCH 04/10] rockchip: spl: support a 'same-as-spl'-specifier in the spl-boot-order
Simon Glass
- [U-Boot] [PATCH 05/10] rockchip: spl: rk3399: implement chip-specific board_spl_was_booted_from()
Simon Glass
- [U-Boot] [PATCH 06/10] rockchip: dts: rk3399-puma: add 'same-as-spl' to the front of the boot-order
Simon Glass
- [U-Boot] [PATCH 07/10] rockchip: puma-rk3399: update board_init()
Simon Glass
- [U-Boot] [PATCH 08/10] rockchip: rk3399-puma: add boot-on regulator to override BIOS_DISABLE
Simon Glass
- [U-Boot] [PATCH 09/10] power: spl: add SPL_DM_REGULATOR_FIXED in Kconfig
Simon Glass
- [U-Boot] [PATCH 10/10] rockchip: defconfig: puma-rk3399: update for DM_REGULATOR support in SPL
Simon Glass
- [U-Boot] [PATCH 1/2] rockchip: clk: rk3399: add clk_enable function and support USB HOST0/1
Simon Glass
- [U-Boot] [PATCH 2/2] rockchip: dts: rk3399-puma: replace 'rockchip, vbus-gpio' with fixed regulator
Simon Glass
- [U-Boot] [PATCH 1/3] rockchip: make boot_mode releated codes reused across all platforms
Simon Glass
- [U-Boot] [PATCH 2/3] rockchip: add support for backing to bootrom download mode
Simon Glass
- [U-Boot] [PATCH 3/3] rockchip: check download key before bootup
Simon Glass
- [U-Boot] [PATCH v5 08/10] fdtdec: sort include files
Simon Glass
- [U-Boot] [RESEND PATCH 1/2] rockchip: clk: rk3399: add clk_enable function and support USB HOST0/1
Simon Glass
- [U-Boot] [RESEND PATCH 2/2] rockchip: dts: rk3399-puma: replace 'rockchip, vbus-gpio' with fixed regulator
Simon Glass
- [U-Boot] [RESEND PATCH 2/6] rockchip: xhci: Convert to livetree
Simon Glass
- [U-Boot] [RESEND PATCH 1/6] rockchip: clk: rk3399: Convert to livetree
Simon Glass
- [U-Boot] [RESEND PATCH 3/6] rockchip: efuse: change to use dev_read_addr_ptr
Simon Glass
- [U-Boot] [RESEND PATCH 4/6] usb: dwc2: convert to livetree
Simon Glass
- [U-Boot] [RESEND PATCH 5/6] usb: host: ehci-generic: convert to livetree
Simon Glass
- [U-Boot] [RESEND PATCH 6/6] rockchip: defconfig: puma-rk3399: enable OF_LIVE (live tree)
Simon Glass
- [U-Boot] [PATCH v2 02/14] usb: gadget: Document USBNET_DEVADDR
Simon Glass
- [U-Boot] [PATCH v2 04/14] usb: gadget: Convert USB_ETHER to Kconfig
Simon Glass
- [U-Boot] [PATCH v2 05/14] usb: gadget: usb_ether: Move the interfaces to Kconfig
Simon Glass
- [U-Boot] [PATCH v2 03/14] usb: gadget: Move USBNET_HOST_ADDR to Kconfig
Simon Glass
- [U-Boot] [PATCH V2] dm: gpio: Add DM compatibilty to GPIO driver for Davinci
Simon Glass
- [U-Boot] [PATCH] Convert CONFIG_EMIF4 et al to Kconfig
Simon Glass
- [U-Boot] [PATCH] rockchip: enable TPL_SYSRESET for all rockchip SoCs
Simon Glass
- [U-Boot] [PATCH] fs/fat: fix fatbuf leak
Simon Glass
- [U-Boot] Compiling Mainline Kernel v4.4.70 Stable to ChormeBook Nvidia Tegra TK1 (Ubuntu-Xenial) -Uboot Not Booting (BlackScreen)
Simon Glass
- [U-Boot] [PATCH v5 1/9] lib: at91: Add logo files used via API of DM_VIDEO
Simon Glass
- [U-Boot] [PATCH v5 2/9] atmel: common: Add function to display via DM_VIDEO's API
Simon Glass
- [U-Boot] [PATCH v5 9/9] board: atmel: Add SAMA5D27 SOM1 EK board
Simon Glass
- [U-Boot] [PATCH v5 4/9] ARM: at91: spl: Add mck function to lower rate while switching
Simon Glass
- [U-Boot] [PATCH v5 5/9] board: sama5d2_xplained: Make SPL work on spiflash
Simon Glass
- [U-Boot] [PATCH v3 00/14] uboot overlays, FIT image & unittest
Simon Glass
- [U-Boot] [PATCH] patman: Fix error when the email blacklist is missing
Simon Glass
- [U-Boot] Please pull u-boot-dm
Simon Glass
- [U-Boot] [PATCH v2 3/6] dm: x86: Update timer_get_boot_us to work before DM is ready
Simon Glass
- [U-Boot] [PATCH] Travis-CI: Switch back to using the top of tree dtc
Simon Glass
- [U-Boot] [PATCH v2 05/16] dtoc: Add support for 32 or 64-bit addresses
Simon Glass
- [U-Boot] [PATCH v3 03/14] fdt: Switch to using the verbose overlay application method
Simon Glass
- [U-Boot] Please pull u-boot-fdt
Simon Glass
- [U-Boot] [PATCH] xyz-modem: Fix timeout loop waiting with WATCHDOG
Simon Glass
- [U-Boot] [PATCH 00/13] log: Add a new logging feature
Simon Glass
- [U-Boot] [PATCH 01/13] Revert "sandbox: remove os_putc() and os_puts()"
Simon Glass
- [U-Boot] [PATCH 02/13] Revert "sandbox: Drop special case console code for sandbox"
Simon Glass
- [U-Boot] [PATCH 03/13] Move debug and logging support to a separate header
Simon Glass
- [U-Boot] [PATCH 04/13] mtdparts: Correct use of debug()
Simon Glass
- [U-Boot] [PATCH 05/13] Drop the log buffer
Simon Glass
- [U-Boot] [PATCH 06/13] log: Add an implemention of logging
Simon Glass
- [U-Boot] [PATCH 07/13] log: Add a console driver
Simon Glass
- [U-Boot] [PATCH 08/13] log: Add a 'log level' command
Simon Glass
- [U-Boot] [PATCH 09/13] log: Add a test command
Simon Glass
- [U-Boot] [PATCH 10/13] log: Plumb logging into the init sequence
Simon Glass
- [U-Boot] [PATCH 11/13] log: sandbox: Enable logging
Simon Glass
- [U-Boot] [PATCH 12/13] log: test: Add a pytest for logging
Simon Glass
- [U-Boot] [PATCH 13/13] log: Add documentation
Simon Glass
- [U-Boot] [PATCH 1/1] spl: u-boot-spl-nodtb.bin: remove .got and .got.plt sections
Simon Glass
- [U-Boot] [PATCH 3/3] rockchip: check download key before bootup
Simon Glass
- [U-Boot] [PATCH] rockchip: rock-rk3188: do not use ARCH_MEMSET in TPL
Simon Glass
- [U-Boot] [PATCH 09/10] power: spl: add SPL_DM_REGULATOR_FIXED in Kconfig
Simon Glass
- [U-Boot] [U-Boot,2/5] power: pmic: rk816: support rk816 pmic
Simon Glass
- [U-Boot] [PATCH 2/6] treewide: replace with error() with pr_err()
Simon Glass
- [U-Boot] [PATCH] spl: stash bootstage info before jump to next stage
Simon Glass
- [U-Boot] [PATCH v2 1/9] pinctrl: stm32: add stm32h743-pinctrl compatible
Simon Glass
- [U-Boot] [PATCH v2 2/9] serial: stm32x7: add STM32H7 support
Simon Glass
- [U-Boot] [PATCH v2 3/9] dm: clk: add clk driver support for stm32h7 SoCs
Simon Glass
- [U-Boot] [PATCH v2 4/9] dm: reset: add stm32 reset driver
Simon Glass
- [U-Boot] [PATCH v2 5/9] dm: misc: add stm32 rcc driver
Simon Glass
- [U-Boot] [PATCH v2 6/9] ARM: DTS: stm32: add stm32h743i-disco files
Simon Glass
- [U-Boot] [PATCH v2 7/9] ARM: DTS: stm32: add stm32h743i-eval files
Simon Glass
- [U-Boot] [PATCH v2 8/9] ARM: DTS: stm32: adapt stm32h7 dts files for U-boot
Simon Glass
- [U-Boot] [PATCH v2 9/9] board: Add stm32h7 SoC, discovery and evaluation boards support
Simon Glass
- [U-Boot] [PATCH 01/15] image: add IH_OS_ARM_TRUSTED_FIRMWARE for ARM Trusted Firmware
Simon Glass
- [U-Boot] [PATCH 02/15] spl: add a fdt_addr field to spl_image_info
Simon Glass
- [U-Boot] [PATCH 03/15] spl: change load_addr and entry_point to uintptr_t
Simon Glass
- [U-Boot] [PATCH 05/15] spl: fit: implement fdt_record_loadable
Simon Glass
- [U-Boot] [PATCH 06/15] spl: fit: implement recording of loadables into /fit-images
Simon Glass
- [U-Boot] [PATCH 07/15] spl: atf: introduce spl_invoke_atf and make bl31_entry private
Simon Glass
- [U-Boot] [PATCH 08/15] spl: rename config item SPL_ATF_SUPPORT to SPL_ATF
Simon Glass
- [U-Boot] [PATCH 09/15] spl: atf: drop the SPL_ATF_TEXT_BASE configuration item
Simon Glass
- [U-Boot] [PATCH 10/15] rockchip: dts: rk3399-puma: add /config/arm-trusted-firmware, reset-gpio property
Simon Glass
- [U-Boot] [PATCH 11/15] rockchip: defconfig: firefly-rk3399: sync up with SPL changes for ATF
Simon Glass
- [U-Boot] [PATCH 12/15] rockchip: board: puma-rk3399: update .its file to use new features
Simon Glass
- [U-Boot] [PATCH 14/15] rockchip: defconfig: puma-rk3399: sync up with SPL changes for ATF
Simon Glass
- [U-Boot] [PATCH 13/15] rockchip: board: lion-rk3368: update .its file
Simon Glass
- [U-Boot] [PATCH 15/15] rockchip: defconfig: lion-rk3368: sync up with SPL changes for ATF
Simon Glass
- [U-Boot] [PATCH 04/15] spl: fit: simplify logic for FDT loading for non-OS boots
Simon Glass
- [U-Boot] [PATCH] test: print_ut: Add test for %ls strings
Simon Glass
- [U-Boot] [PATCH v2 1/7] spl: fix assignment of board info to global data
Simon Glass
- [U-Boot] [PATCH v2 3/7] armv8: fsl-layerscape: Avoid running dram_init_banksize again
Simon Glass
- [U-Boot] [PATCH v2 5/7] armv8: layerscape: Eanble falcon boot
Simon Glass
- [U-Boot] [PATCH v2 7/7] armv8: ls1043ardb_sdcard: Enable falcon boot
Simon Glass
- [U-Boot] [PATCH 2/3] dm: video: Add basic ANSI escape sequence support
Simon Glass
- [U-Boot] [PATCH v2 1/5] board: sama5d2_xplained: Convert to CONFIG_DM_VIDEO
Simon Glass
- [U-Boot] [PATCH v2 2/5] board: sama5d3xek: Convert to CONFIG_DM_VIDEO
Simon Glass
- [U-Boot] [PATCH v2 3/5] board: sama5d4ek: Convert to CONFIG_DM_VIDEO
Simon Glass
- [U-Boot] [PATCH v2 4/5] board: sama5d4_xplained: Convert to CONFIG_DM_VIDEO
Simon Glass
- [U-Boot] [PATCH v2 5/5] board: at91sam9x5ek: Convert to CONFIG_DM_VIDEO
Simon Glass
- [U-Boot] [PATCH 01/13] Revert "sandbox: remove os_putc() and os_puts()"
Simon Glass
- [U-Boot] [PATCH 02/13] Revert "sandbox: Drop special case console code for sandbox"
Simon Glass
- [U-Boot] [PATCH V2] dm: gpio: Add DM compatibilty to GPIO driver for Davinci
Simon Glass
- [U-Boot] [PATCH 00/10] efi_loader: event services & API test
Simon Glass
- [U-Boot] [PATCH 2/3] dm: video: Add basic ANSI escape sequence support
Simon Glass
- [U-Boot] [PATCH 00/10] efi_loader: event services & API test
Simon Glass
- [U-Boot] [PATCH 1/4] dm: gpio: vybrid_gpio: Correct driver's use of bind() method
Simon Glass
- [U-Boot] [PATCH 2/4] dm: gpio: Add a comment about not copying some drivers
Simon Glass
- [U-Boot] [PATCH 3/4] dm: gpio: Correct use of -ENODEV in drivers
Simon Glass
- [U-Boot] [PATCH 4/4] dm: gpio: pca953x: Drop pointless data structure checks
Simon Glass
- [U-Boot] [PATCH 00/16] efi: Enable basic sandbox support for EFI loader
Simon Glass
- [U-Boot] [PATCH 01/16] efi: Update efi_smbios_register() to return error code
Simon Glass
- [U-Boot] [PATCH 02/16] efi: Move the init check inside efi_init_obj_list()
Simon Glass
- [U-Boot] [PATCH 03/16] efi: Add error checking for efi_init_obj_list()
Simon Glass
- [U-Boot] [PATCH 04/16] efi: Add a TODO to efi_init_obj_list()
Simon Glass
- [U-Boot] [PATCH 05/16] efi: Correct header order in efi_memory
Simon Glass
- [U-Boot] [PATCH 06/16] efi: sandbox: Adjust memory setup for sandbox
Simon Glass
- [U-Boot] [PATCH 07/16] sandbox: smbios: Update to support sandbox
Simon Glass
- [U-Boot] [PATCH 08/16] sandbox: Add a setjmp() implementation
Simon Glass
- [U-Boot] [PATCH 09/16] efi: sandbox: Add required linker sections
Simon Glass
- [U-Boot] [PATCH 10/16] efi: sandbox: Add distroboot support
Simon Glass
- [U-Boot] [PATCH 11/16] Define board_quiesce_devices() in a shared location
Simon Glass
- [U-Boot] [PATCH 12/16] Add a comment for board_quiesce_devices()
Simon Glass
- [U-Boot] [PATCH 13/16] efi: sandbox: Add relocation constants
Simon Glass
- [U-Boot] [PATCH 14/16] efi: Add a comment about duplicated ELF constants
Simon Glass
- [U-Boot] [PATCH 15/16] efi: sandbox: Enable EFI loader builder for sandbox
Simon Glass
- [U-Boot] [PATCH 16/16] efi: sandbox: Add a simple 'bootefi test' command
Simon Glass
- [U-Boot] [PATCH 00/16] efi: Enable basic sandbox support for EFI loader
Simon Glass
- [U-Boot] Kconfiglib update and tools/moveconfig.py
Simon Glass
- [U-Boot] Sandbox 'usb start' causes segment fault
Simon Glass
- [U-Boot] [PATCH 2/3] dm: video: Add basic ANSI escape sequence support
Simon Glass
- [U-Boot] [PATCH 16/23] efi_loader: implement DisconnectController
Simon Glass
- [U-Boot] [PATCH 15/23] efi_loader: implement ConnectController
Simon Glass
- [U-Boot] [PATCH 06/13] log: Add an implemention of logging
Simon Glass
- [U-Boot] [PATCH 13/13] log: Add documentation
Simon Glass
- [U-Boot] [PATCH 06/13] log: Add an implemention of logging
Simon Glass
- [U-Boot] Sandbox 'usb start' causes segment fault
Simon Glass
- [U-Boot] [PATCH v3 15/21] efi_loader: add bootmgr
Simon Glass
- [U-Boot] [PATCH 16/23] efi_loader: implement DisconnectController
Simon Glass
- [U-Boot] [PATCH 06/13] log: Add an implemention of logging
Simon Glass
- [U-Boot] [PATCH 00/13] log: Add a new logging feature
Simon Glass
- [U-Boot] [PATCH 00/13] log: Add a new logging feature
Simon Glass
- [U-Boot] Invitation: Unibuild discussion @ Thu 21 Sep 2017 12:00 - 13:00 (MDT) (u-boot at lists.denx.de)
Simon Glass
- [U-Boot] Updated invitation: Unibuild discussion @ Thu 21 Sep 2017 12:00 - 13:30 (MDT) (u-boot at lists.denx.de)
Simon Glass
- [U-Boot] [PATCH 1/1] efi_loader: provide comment for protocol GUIDs
Simon Glass
- [U-Boot] [PATCH 01/10] efi_loader: allow return value in EFI_CALL
Simon Glass
- [U-Boot] [PATCH 02/10] efi_selftest: provide an EFI selftest application
Simon Glass
- [U-Boot] [PATCH 04/10] efi_loader: implement queueing of the notification function
Simon Glass
- [U-Boot] [PATCH 05/10] efi_loader: efi_set_timer: reset signaled state
Simon Glass
- [U-Boot] [PATCH 06/10] efi_selftest: provide unit test for event services
Simon Glass
- [U-Boot] [PATCH 07/10] efi_loader: implement task priority level (TPL)
Simon Glass
- [U-Boot] [PATCH 08/10] efi_selftest: test task priority levels
Simon Glass
- [U-Boot] [PATCH 09/10] efi_loader: notify when ExitBootServices is invoked
Simon Glass
- [U-Boot] [PATCH 10/10] efi_selftest: check notification of ExitBootServices
Simon Glass
- [U-Boot] [PATCH 03/10] test/py: add a test calling the EFI selftest
Simon Glass
- [U-Boot] [PATCH v6 08/10] fdtdec: sort include files
Simon Glass
- [U-Boot] [PATCH 1/3] arm: make save_boot_params_ret prototype visible for AArch64
Simon Glass
- [U-Boot] [PATCH 3/3] rockchip: back-to-bootrom: allow passing a cmd to the bootrom
Simon Glass
- [U-Boot] [PATCH] rockchip: board: lion-rk3368: avoid ATF overwriting active SPL stage
Simon Glass
- [U-Boot] [PATCH 00/16] efi: Enable basic sandbox support for EFI loader
Simon Glass
- [U-Boot] [PATCH v2 3/5] rockchip: back-to-bootrom: rk3188: chain from SPL via TPL to the BROM
Simon Glass
- [U-Boot] [PATCH v2 4/5] rockchip: back-to-bootrom: allow passing a cmd to the bootrom
Simon Glass
- [U-Boot] [PATCH] efi_loader: EFI entry point should be EFIAPI
Simon Glass
- [U-Boot] [PATCH 08/16] sandbox: Add a setjmp() implementation
Simon Glass
- [U-Boot] [PATCH v2 1/1] test/py: provide example scripts for integrating qemu
Simon Glass
- [U-Boot] [PATCH] dm: core: Round up size when allocating so that it is cache line aligned
Simon Glass
- [U-Boot] [PATCH] rockchip: pinctrl: rk3368: add pinctrl for SDMMC0
Simon Glass
- [U-Boot] [PATCH v2 1/1] x86: provide CONFIG_BUILD_ROM
Simon Glass
- [U-Boot] [PATCH] dm: ofnode: query correct property in livetree ofnode_get_addr_size
Simon Glass
- [U-Boot] [PATCH v2 1/7] spl: fix assignment of board info to global data
Simon Glass
- [U-Boot] [PATCH 1/1] efi_selftest: enable CONFIG_CMD_BOOTEFI_SELFTEST
Simon Glass
- [U-Boot] [PATCH v2 1/1] efi_loader: reenable selftest
Simon Glass
- [U-Boot] [PATCH v5] cmd: usb: add blk, emulation devices to ignore list as needed
Simon Glass
- [U-Boot] [PATCH 1/1] dm: clk: add missing .priv_auto_alloc_size() for stm32f7
Simon Glass
- [U-Boot] [PATCH 1/1] sandbox: avoid memory leak in os_dirent_ls
Simon Glass
- [U-Boot] drivers/core/read.c:64:44: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast]
Simon Glass
- [U-Boot] [PATCH v3 15/21] efi_loader: add bootmgr
Simon Glass
- [U-Boot] [PATCH 1/1] efi_loader: provide function comments for boot services
Simon Glass
- [U-Boot] [PATCH v3 1/2] dm: core: Add functions to get strings and the string count from a stringlist
Simon Glass
- [U-Boot] [PATCH 1/1] efi_loader: call EFI_EXIT in efi_copy_mem, efi_set_mem
Simon Glass
- [U-Boot] Request For Comments: wget and TCP listener
Simon Glass
- [U-Boot] [PATCH 1/2] disk: Provide API to get partition by name for specific type
Simon Glass
- [U-Boot] [PATCH 2/2] omap: Fix warning when looking for userdata part
Simon Glass
- [U-Boot] [PATCH 1/1] GPT: incomplete initialization in allocate_disk_part
Simon Glass
- [U-Boot] [PATCH 1/1] ARMv8: get new GD address from gd->new_gd directly
Simon Glass
- [U-Boot] [PATCH 06/13] log: Add an implemention of logging
Simon Glass
- [U-Boot] [PATCH v2 26/26] dm: mmc: Add a library function to parse generic dt binding
Simon Glass
- [U-Boot] Makefile: Update minimum dtc version to 1.4.3
Simon Glass
- [U-Boot] [PATCH v2 1/3] board: STiH410-B2260: update environment variable
Simon Glass
- [U-Boot] [PATCH v2 2/3] board: STiH410-B2260: fix sdram size
Simon Glass
- [U-Boot] [PATCH v2 3/3] board: STiH410-B2260: set ramdisk_addr_r to 0x48000000
Simon Glass
- [U-Boot] [PATCH 16/16] efi: sandbox: Add a simple 'bootefi test' command
Simon Glass
- [U-Boot] setjmp/longjmp prototype in U-Boot
Simon Glass
- [U-Boot] [PATCH] xyz-modem: Fix timeout loop waiting with WATCHDOG
Simon Glass
- [U-Boot] [PATCH v2 8/8] dm: define dev_*() log functions in DM header
Simon Glass
- [U-Boot] [PATCH v2 3/8] treewide: replace with error() with pr_err()
Simon Glass
- [U-Boot] [PATCH v2 0/5] mmc: omap_hsmmc: Add support for ADMA
Simon Glass
- [U-Boot] [PATCH 1/1] Makefile: indicate dtc source location
Simon Glass
- [U-Boot] [PATCH 1/1] ARMv8: fix error in freeing stack frame
Simon Glass
- [U-Boot] [PATCH 00/16] efi: Enable basic sandbox support for EFI loader
Simon Glass
- [U-Boot] [PATCH 07/13] log: Add a console driver
Simon Glass
- [U-Boot] [PATCH 06/13] log: Add an implemention of logging
Simon Glass
- [U-Boot] [PATCH] test/dm: Fix string handling issues in the eth test
Simon Glass
- [U-Boot] [PATCH v2 00/14] log: Add a new logging feature
Simon Glass
- [U-Boot] [PATCH v2 01/14] Revert "sandbox: remove os_putc() and os_puts()"
Simon Glass
- [U-Boot] [PATCH v2 02/14] sandbox: Adjust pre-console address to avoid conflict
Simon Glass
- [U-Boot] [PATCH v2 03/14] Revert "sandbox: Drop special case console code for sandbox"
Simon Glass
- [U-Boot] [PATCH v2 04/14] Move debug and logging support to a separate header
Simon Glass
- [U-Boot] [PATCH v2 05/14] mtdparts: Correct use of debug()
Simon Glass
- [U-Boot] [PATCH v2 06/14] Drop the log buffer
Simon Glass
- [U-Boot] [PATCH v2 07/14] log: Add an implemention of logging
Simon Glass
- [U-Boot] [PATCH v2 08/14] log: Add a console driver
Simon Glass
- [U-Boot] [PATCH v2 09/14] log: Add a 'log level' command
Simon Glass
- [U-Boot] [PATCH v2 10/14] log: Add a test command
Simon Glass
- [U-Boot] [PATCH v2 11/14] log: Plumb logging into the init sequence
Simon Glass
- [U-Boot] [PATCH v2 12/14] log: sandbox: Enable logging
Simon Glass
- [U-Boot] [PATCH v2 13/14] log: test: Add a pytest for logging
Simon Glass
- [U-Boot] [PATCH v2 14/14] log: Add documentation
Simon Glass
- [U-Boot] [PATCH 0/3] dm: video: enhancements for Shell.efi
Simon Glass
- [U-Boot] [PATCH] dm: core: Correct address cast in dev_read_addr_ptr()
Simon Glass
- [U-Boot] [PATCH 06/13] log: Add an implemention of logging
Simon Glass
- [U-Boot] drivers/core/read.c:64:44: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast]
Simon Glass
- [U-Boot] Please pull u-boot-dm
Simon Glass
- [U-Boot] [PATCH v2 1/2] rockchip: board: lion_rk3368: update README flash instructions
Klaus Goger
- [U-Boot] [PATCH v2 2/2] rockchip: board: puma_rk3399: update README flash instructions
Klaus Goger
- [U-Boot] [PATCH] rockchip: puma_rk3399: increase serialno_str size
Klaus Goger
- [U-Boot] [PATCH] dm: ofnode: query correct property in livetree ofnode_get_addr_size
Klaus Goger
- [U-Boot] [PATCH 03/23] efi_loader: support 16 protocols per efi_object
Alexander Graf
- [U-Boot] [PATCH 03/23] efi_loader: support 16 protocols per efi_object
Alexander Graf
- [U-Boot] [PATCH] efi_loader: Fix efi_exit gd clobbering
Alexander Graf
- [U-Boot] [PATCH 1/1] scripts/Makefile.lib: remove overridden target $(obj)/helloworld.so:
Alexander Graf
- [U-Boot] [PATCH 1/1] efi_loader: helloworld.c: remove superfluous include
Alexander Graf
- [U-Boot] [PATCH 1/1] efi_loader: move efi_guid_t typedef to efi.h
Alexander Graf
- [U-Boot] [PATCH v2 2/5] lib: add some utf16 handling helpers
Alexander Graf
- [U-Boot] [PATCH v2 2/5] lib: add some utf16 handling helpers
Alexander Graf
- [U-Boot] [RFC 1/1] efi_loader: fix building of helloworld.efi on x86_64
Alexander Graf
- [U-Boot] [PATCH] efi_loader: EFI entry point should be EFIAPI
Alexander Graf
- [U-Boot] [PATCH] efi_loader: EFI entry point should be EFIAPI
Alexander Graf
- [U-Boot] [PATCH 1/1] efi_loader: fix bug in efi_add_known_memory
Alexander Graf
- [U-Boot] [PATCH v3 05/21] efi_loader: add device-path utils
Alexander Graf
- [U-Boot] [PATCH v3 15/21] efi_loader: add bootmgr
Alexander Graf
- [U-Boot] [PATCH v3 00/21] efi_loader: enough UEFI for standard distro boot
Alexander Graf
- [U-Boot] [PATCH v3 15/21] efi_loader: add bootmgr
Alexander Graf
- [U-Boot] [U-Boot,v3,01/21] part: move efi_guid_t
Alexander Graf
- [U-Boot] [U-Boot,v3,05/21] efi_loader: add device-path utils
Alexander Graf
- [U-Boot] efi_loader: fix efi_exit
Alexander Graf
- [U-Boot] [U-Boot, v3, 04/21] efi: add some more device path structures
Alexander Graf
- [U-Boot] [U-Boot, v3, 12/21] efi_loader: support load_image() from a file-path
Alexander Graf
- [U-Boot] [U-Boot, v3, 06/21] efi_loader: drop redundant efi_device_path_protocol
Alexander Graf
- [U-Boot] [U-Boot,v3,03/21] efi: add some missing __packed
Alexander Graf
- [U-Boot] [U-Boot, v3, 20/21] efi_loader: Correctly figure out size for vidconsole
Alexander Graf
- [U-Boot] [U-Boot, v3, 11/21] efi_loader: add file/filesys support
Alexander Graf
- [U-Boot] [U-Boot,v3,18/21] efi_loader: print GUIDs
Alexander Graf
- [U-Boot] [U-Boot, v3, 13/21] efi_loader: make pool allocations cacheline aligned
Alexander Graf
- [U-Boot] [U-Boot, v3, 08/21] efi_loader: use proper device-paths for partitions
Alexander Graf
- [U-Boot] [U-Boot, v3, 10/21] efi_loader: refactor boot device and loaded_image handling
Alexander Graf
- [U-Boot] [U-Boot, v3, 07/21] efi_loader: flesh out device-path to text
Alexander Graf
- [U-Boot] [U-Boot,v3,14/21] efi_loader: efi variable support
Alexander Graf
- [U-Boot] [U-Boot, v3, 21/21] efi_loader: Some console improvements for vidconsole
Alexander Graf
- [U-Boot] [U-Boot,v3,15/21] efi_loader: add bootmgr
Alexander Graf
- [U-Boot] [U-Boot, v3, 19/21] efi_loader: split out escape sequence based size query
Alexander Graf
- [U-Boot] [U-Boot, v3, 02/21] part: extract MBR signature from partitions
Alexander Graf
- [U-Boot] [U-Boot, v3, 09/21] efi_loader: use proper device-paths for net
Alexander Graf
- [U-Boot] [U-Boot, v3, 17/21] efi_loader: set loaded image code/data type properly
Alexander Graf
- [U-Boot] [U-Boot, v3, 16/21] efi_loader: file_path should be variable length
Alexander Graf
- [U-Boot] setjmp/longjmp prototype in U-Boot
Alexander Graf
- [U-Boot] [PATCH v3 3/6] arm: provide a PCS-compliant setjmp implementation
Alexander Graf
- [U-Boot] [PATCH] Revert "dm: arm: rpi: Drop CONFIG_OF_EMBED"
Jonathan Gray
- [U-Boot] [PATCH] Fix s25fl256s position in spi_flash_ids list
Vsevolod Gribov
- [U-Boot] [PATCH] crypto/fsl: fix obj-yy in Makefile
Clemens Gruber
- [U-Boot] SPI NAND Support
Suresh Gupta
- [U-Boot] SPI NAND support
Suresh Gupta
- [U-Boot] SPI NAND support
Suresh Gupta
- [U-Boot] [PATCH] sf: Fix s25fs512s erase size and remove SECT_4K flag
Suresh Gupta
- [U-Boot] [PATCH] spi: fsl_qspi: Copy 16 byte aligned data in TX FIFO
Suresh Gupta
- [U-Boot] Please pull u-boot-video/master
Anatolij Gustschin
- [U-Boot] [PATCH v2] video: ipuv3_fb: skip IPU shutdown if IPU was not enabled before
Anatolij Gustschin
- [U-Boot] Bad URL for mailing list info in "Contacts" web page
Anatolij Gustschin
- [U-Boot] [PATCH] MAINTAINERS: add lcd files to video section
Anatolij Gustschin
- [U-Boot] [PATCH v2] video: ipuv3_fb: skip IPU shutdown if IPU was not enabled before
Anatolij Gustschin
- [U-Boot] Please pull u-boot-video/master
Anatolij Gustschin
- [U-Boot] Please pull u-boot-video/master
Anatolij Gustschin
- [U-Boot] [PATCH] ipu_common: Let the MX6 IPU clock be calculated in run-time
Anatolij Gustschin
- [U-Boot] [PATCH] ipu_common: Let the MX6 IPU clock be calculated in run-time
Anatolij Gustschin
- [U-Boot] [PATCH] ipu_common: Let the MX6 IPU clock be calculated in run-time
Anatolij Gustschin
- [U-Boot] Please pull u-boot-video/master
Anatolij Gustschin
- [U-Boot] Please pull u-boot-video/next
Anatolij Gustschin
- [U-Boot] [PATCH] imx6: disable clock command and print_cpuinfo code in SPL
Anatolij Gustschin
- [U-Boot] [PATCH] imx6: disable clock command and print_cpuinfo code in SPL
Anatolij Gustschin
- [U-Boot] [PATCH] imx6: disable clock command and print_cpuinfo code in SPL
Anatolij Gustschin
- [U-Boot] [PATCH] imx6: disable clock command and print_cpuinfo code in SPL
Anatolij Gustschin
- [U-Boot] Please pull u-boot-video/imx
Anatolij Gustschin
- [U-Boot] [PATCH 5/6] apalis_imx6: Avoid calling setup_display() from SPL code
Anatolij Gustschin
- [U-Boot] [PATCH v3 0/5] board: atmel: Convert to support video driver model
Anatolij Gustschin
- [U-Boot] [PATCH 0/3] dm: video: enhancements for Shell.efi
Anatolij Gustschin
- [U-Boot] [PATCH 1/2] video: test: Helper for writing strings
Anatolij Gustschin
- [U-Boot] [PATCH 2/2] video: test: Add ANSI escape sequence tests
Anatolij Gustschin
- [U-Boot] [PATCH] dm: video: make ANSI escape sequence support optional
Anatolij Gustschin
- [U-Boot] Disable axp209 auto start
Florian HESLOUIN
- [U-Boot] Adding new net command
Duncan Hare
- [U-Boot] Request For Comments: wget and TCP listener
Duncan Hare
- [U-Boot] Make Menuconfig Fails
Duncan Hare
- [U-Boot] Rainbow Screen of Death - Raspberry PI Current u-boot master
Duncan Hare
- [U-Boot] Patman - Submitting to mailing list
Duncan Hare
- [U-Boot] [PATCH] wget and enough TCP stack for fast netboot
Duncan Hare
- [U-Boot] [PATCH] drivers: pci: imx: add imx_pcie_remove function
Tim Harvey
- [U-Boot] Pull request: u-boot-net.git master
Joe Hershberger
- [U-Boot] net: phy: realtek: fix enabling of the TX-delay for RTL8211F
Joe Hershberger
- [U-Boot] net: nfs: Drop CONFIG_NFS_READ_SIZE
Joe Hershberger
- [U-Boot] armv8: ls1043/ls1046aqds: add support for RGMII_TXID
Joe Hershberger
- [U-Boot] net: fix typos
Joe Hershberger
- [U-Boot] [PATCH] net: Correct size of NFS buffers
Joe Hershberger
- [U-Boot] [PATCH v2 06/19] net: phy: micrel: Convert to livetree
Joe Hershberger
- [U-Boot] [PATCH] net: ravb: Add PHY reset GPIO support
Joe Hershberger
- [U-Boot] [PATCH] test/dm: Fix string handling issues in the eth test
Joe Hershberger
- [U-Boot] [PATCH 4/6] net: gmac_rockchip: Define the gmac grf register struct at gmac_rockchip.c
Joe Hershberger
- [U-Boot] [PATCH 7/9] net: sun8i_emac: Fix build for non-H3/H5 SoCs
Joe Hershberger
- [U-Boot] [PATCH 6/9] net: sun8i_emac: Support RX/TX delay chains
Joe Hershberger
- [U-Boot] [PATCH v4 8/9] spl: dm: Make it possible for the SPL to pick its own DTB from a FIT
Jean-Jacques Hiblot
- [U-Boot] [PATCH v5 00/10] spl: dm: Make it possible for the SPL to pick its own DTB from a FIT
Jean-Jacques Hiblot
- [U-Boot] [PATCH v5 01/10] dts: renamed FIT_EMBED to MULTI_DTB_FIT and moved it to the dts Kconfig
Jean-Jacques Hiblot
- [U-Boot] [PATCH v5 02/10] fit: use 'const' for the input of fdt_offset() and locate_dtb_in_fit()
Jean-Jacques Hiblot
- [U-Boot] [PATCH v5 03/10] fit: fixed bug in locate_dtb_in_fit()
Jean-Jacques Hiblot
- [U-Boot] [PATCH v5 04/10] fit: If no matching config is found in fit_find_config_node(), use the default one
Jean-Jacques Hiblot
- [U-Boot] [PATCH v5 05/10] lzo: add a function to check the validity of the header
Jean-Jacques Hiblot
- [U-Boot] [PATCH v5 06/10] gzip: add a function to parse the header
Jean-Jacques Hiblot
- [U-Boot] [PATCH v5 07/10] lib: allow building lzo and gunzip for the SPL
Jean-Jacques Hiblot
- [U-Boot] [PATCH v5 08/10] fdtdec: sort include files
Jean-Jacques Hiblot
- [U-Boot] [PATCH v5 09/10] spl: dm: Make it possible for the SPL to pick its own DTB from a FIT
Jean-Jacques Hiblot
- [U-Boot] [PATCH v5 10/10] omap: detect board before spl_early_init()
Jean-Jacques Hiblot
- [U-Boot] [PATCH] spl: fit: Fixed incompatible type warning in spl_load_fit_image()
Jean-Jacques Hiblot
- [U-Boot] [PATCH] arm: dts: Add missing u-boot specific dtsi for dra7-evm
Jean-Jacques Hiblot
- [U-Boot] [PATCH v6 00/10] spl: dm: Make it possible for the SPL to pick its own DTB from a FIT
Jean-Jacques Hiblot
- [U-Boot] [PATCH v6 01/10] dts: renamed FIT_EMBED to MULTI_DTB_FIT and moved it to the dts Kconfig
Jean-Jacques Hiblot
- [U-Boot] [PATCH v6 02/10] fit: use 'const' for the input of fdt_offset() and locate_dtb_in_fit()
Jean-Jacques Hiblot
- [U-Boot] [PATCH v6 03/10] fit: fixed bug in locate_dtb_in_fit()
Jean-Jacques Hiblot
- [U-Boot] [PATCH v6 04/10] fit: If no matching config is found in fit_find_config_node(), use the default one
Jean-Jacques Hiblot
- [U-Boot] [PATCH v6 05/10] lzo: add a function to check the validity of the header
Jean-Jacques Hiblot
- [U-Boot] [PATCH v6 06/10] gzip: add a function to parse the header
Jean-Jacques Hiblot
- [U-Boot] [PATCH v6 07/10] lib: allow building lzo for the SPL
Jean-Jacques Hiblot
- [U-Boot] [PATCH v6 08/10] fdtdec: sort include files
Jean-Jacques Hiblot
- [U-Boot] [PATCH v6 09/10] spl: dm: Make it possible for the SPL to pick its own DTB from a FIT
Jean-Jacques Hiblot
- [U-Boot] [PATCH v6 10/10] omap: detect board before spl_early_init()
Jean-Jacques Hiblot
- [U-Boot] [PATCH 00/22] mmc: Add support for HS200 and UHS modes
Jean-Jacques Hiblot
- [U-Boot] [PATCH] spl: fit: Fixed incompatible type warning in spl_load_fit_image()
Jean-Jacques Hiblot
- [U-Boot] [PATCH] spl: Fix compiling warning on gunzip argument
Jean-Jacques Hiblot
- [U-Boot] [PATCH v2 00/26] mmc: Add support for HS200 and UHS modes
Jean-Jacques Hiblot
- [U-Boot] [PATCH v2 01/26] mmc: dm: get the IO-line and main voltage regulators from the dts
Jean-Jacques Hiblot
- [U-Boot] [PATCH v2 02/26] mmc: split mmc_startup()
Jean-Jacques Hiblot
- [U-Boot] [PATCH v2 03/26] mmc: move the MMC startup for version above v4.0 in a separate function
Jean-Jacques Hiblot
- [U-Boot] [PATCH v2 04/26] mmc: make ext_csd part of struct mmc
Jean-Jacques Hiblot
- [U-Boot] [PATCH v2 05/26] mmc: add a function to read and test the ext csd (mmc >= 4)
Jean-Jacques Hiblot
- [U-Boot] [PATCH v2 06/26] mmc: introduce mmc modes
Jean-Jacques Hiblot
- [U-Boot] [PATCH v2 07/26] mmc: Add a function to dump the mmc capabilities
Jean-Jacques Hiblot
- [U-Boot] [PATCH v2 08/26] mmc: use mmc modes to select the correct bus speed
Jean-Jacques Hiblot
- [U-Boot] [PATCH v2 09/26] cmd: mmc: display the mode name and current bus speed in the mmc info
Jean-Jacques Hiblot
- [U-Boot] [PATCH v2 10/26] mmc: refactor SD startup to make it easier to support new modes
Jean-Jacques Hiblot
- [U-Boot] [PATCH v2 11/26] mmc: refactor MMC startup to make it easier to support new modes
Jean-Jacques Hiblot
- [U-Boot] [PATCH v2 12/26] mmc: make mmc_set_ios() return status
Jean-Jacques Hiblot
- [U-Boot] [PATCH v2 13/26] mmc: Enable signal voltage to be selected from mmc core
Jean-Jacques Hiblot
- [U-Boot] [PATCH v2 14/26] mmc: Add a new callback function to perform the 74 clocks cycle sequence
Jean-Jacques Hiblot
- [U-Boot] [PATCH v2 15/26] mmc: add power cyle support in mmc core
Jean-Jacques Hiblot
- [U-Boot] [PATCH v2 16/26] mmc: add a new mmc parameter to disable mmc clock
Jean-Jacques Hiblot
- [U-Boot] [PATCH v2 17/26] mmc: disable the mmc clock during power off
Jean-Jacques Hiblot
- [U-Boot] [PATCH v2 18/26] mmc: Add a execute_tuning() callback to the mmc operations.
Jean-Jacques Hiblot
- [U-Boot] [PATCH v2 19/26] mmc: add HS200 support in MMC core
Jean-Jacques Hiblot
- [U-Boot] [PATCH v2 20/26] mmc: Add support for UHS modes
Jean-Jacques Hiblot
- [U-Boot] [PATCH v2 21/26] mmc: disable UHS modes if Vcc cannot be switched on and off
Jean-Jacques Hiblot
- [U-Boot] [PATCH v2 22/26] mmc: Change mode when switching to a boot partition
Jean-Jacques Hiblot
- [U-Boot] [PATCH v2 23/26] mmc: Retry some MMC cmds on failure
Jean-Jacques Hiblot
- [U-Boot] [PATCH v2 24/26] mmc: use the right voltage level for MMC DDR and HS200 modes
Jean-Jacques Hiblot
- [U-Boot] [PATCH v2 25/26] mmc: add a library function to send tuning command
Jean-Jacques Hiblot
- [U-Boot] [PATCH v2 26/26] dm: mmc: Add a library function to parse generic dt binding
Jean-Jacques Hiblot
- [U-Boot] [PATCH v2 0/5] mmc: omap_hsmmc: Add support for ADMA
Jean-Jacques Hiblot
- [U-Boot] [PATCH v2 1/5] Revert "omap_hsmmc: update struct hsmmc to accommodate omap3 from DT"
Jean-Jacques Hiblot
- [U-Boot] [PATCH v2 2/5] omap: Update the base address of the MMC controllers
Jean-Jacques Hiblot
- [U-Boot] [PATCH v2 3/5] mmc: omap_hsmmc: Add support for DMA (ADMA2)
Jean-Jacques Hiblot
- [U-Boot] [PATCH v2 4/5] mmc: omap_hsmmc: Enable Auto command (CMD12) enable
Jean-Jacques Hiblot
- [U-Boot] [PATCH v2 5/5] mmc: omap_hsmmc: Fix incorrect bit operations for disabling a bit
Jean-Jacques Hiblot
- [U-Boot] [PATCH v3 0/2] power: Add a driver to handle the PBIAS cell of the TI SOCs
Jean-Jacques Hiblot
- [U-Boot] [PATCH v3 1/2] dm: core: Add functions to get strings and the string count from a stringlist
Jean-Jacques Hiblot
- [U-Boot] [PATCH v3 2/2] regulator: pbias: Add PBIAS regulator for proper voltage switching on MMC1
Jean-Jacques Hiblot
- [U-Boot] [PATCH 00/23] mmc: omap5: Add support for UHS and HS200 modes
Jean-Jacques Hiblot
- [U-Boot] [PATCH 01/23] mmc: omap_hsmmc: cleanup clock configuration
Jean-Jacques Hiblot
- [U-Boot] [PATCH 02/23] mmc: omap_hsmmc: cleanup omap_hsmmc_set_ios
Jean-Jacques Hiblot
- [U-Boot] [PATCH 03/23] mmc: omap_hsmmc: add support to set default io voltage
Jean-Jacques Hiblot
- [U-Boot] [PATCH 04/23] mmc: omap_hsmmc: set MMC mode in the UHSMS bit field
Jean-Jacques Hiblot
- [U-Boot] [PATCH 05/23] mmc: omap_hsmmc: Enable DDR mode support
Jean-Jacques Hiblot
- [U-Boot] [PATCH 06/23] mmc: omap_hsmmc: Add tuning support
Jean-Jacques Hiblot
- [U-Boot] [PATCH 07/23] mmc: omap_hsmmc: Workaround for errata id i802
Jean-Jacques Hiblot
- [U-Boot] [PATCH 08/23] mmc: omap_hsmmc: Reduce the max timeout for reset controller fsm
Jean-Jacques Hiblot
- [U-Boot] [PATCH 09/23] mmc: omap_hsmmc: use mmc_of_parse to populate mmc_config
Jean-Jacques Hiblot
- [U-Boot] [PATCH 10/23] ARM: OMAP5/DRA7: Enable iodelay recalibration to be done from uboot
Jean-Jacques Hiblot
- [U-Boot] [PATCH 11/23] mmc: omap_hsmmc: Add support to set IODELAY values
Jean-Jacques Hiblot
- [U-Boot] [PATCH 12/23] mmc: omap_hsmmc: Add support to get pinctrl values and max frequency for different hw revisions
Jean-Jacques Hiblot
- [U-Boot] [PATCH 13/23] mmc: omap_hsmmc: allow the simple HS modes to use the default pinctrl
Jean-Jacques Hiblot
- [U-Boot] [PATCH 14/23] mmc: omap_hsmmc: update mmc->clock with the actual bus speed
Jean-Jacques Hiblot
- [U-Boot] [PATCH 15/23] mmc: omap_hsmmc: implement send_init_stream callback
Jean-Jacques Hiblot
- [U-Boot] [PATCH 16/23] mmc: omap_hsmmc: allow mmc clock to be gated
Jean-Jacques Hiblot
- [U-Boot] [PATCH 17/23] mmc: omap_hsmmc: add signal voltage selection support
Jean-Jacques Hiblot
- [U-Boot] [PATCH 18/23] ARM: OMAP5: set mmc clock frequency to 192MHz
Jean-Jacques Hiblot
- [U-Boot] [PATCH 19/23] ARM: dts: DRA7: use new dra7-specific compatible string
Jean-Jacques Hiblot
- [U-Boot] [PATCH 20/23] ARM: dts: dra7: Add supported MMC/SD modes in MMC dt nodes
Jean-Jacques Hiblot
- [U-Boot] [PATCH 21/23] dts: am57xx-beagle-x15: disable UHS and HS200 support
Jean-Jacques Hiblot
- [U-Boot] [PATCH 22/23] dts: am57xx-idk: disable HS200 support
Jean-Jacques Hiblot
- [U-Boot] [PATCH 23/23] ARM: DRA7x/AM57x: Add MMC/SD fixups for rev1.0 and rev 1.1
Jean-Jacques Hiblot
- [U-Boot] [PATCH 3/3] armv8: ls1088a: Enable PCIe in defconfigs
Z.q. Hou
- [U-Boot] [PATCH 0/3] armv8: ls1088a: add pcie support
Zhiqiang Hou
- [U-Boot] [PATCH 1/3] armv8: ls1088a: fix the MMU table for pcie config space
Zhiqiang Hou
- [U-Boot] [PATCH 2/3] armv8: ls1088a: add PCIe dts node
Zhiqiang Hou
- [U-Boot] [PATCH 3/3] armv8: ls1088a: Enable PCIe in defconfigs
Zhiqiang Hou
- [U-Boot] setup of PEX_GCLK_RATIO in E500 CPUs(P2010) missing ?
Mingkai Hu
- [U-Boot] setup of PEX_GCLK_RATIO in E500 CPUs(P2010) missing ?
Mingkai Hu
- [U-Boot] setup of PEX_GCLK_RATIO in E500 CPUs(P2010) missing ?
Mingkai Hu
- [U-Boot] FSL PCIe LTSSM >= PCI_LTSSM_L0 equals link up
Mingkai Hu
- [U-Boot] [PATCH] FSL PCI: Configure PCIe reference ratio
Mingkai Hu
- [U-Boot] Please pull u-boot-sh/rmobile branch
Nobuhiro Iwamatsu
- [U-Boot] [PATCH 2/6] ARM: rmobile: Move HSUSB configuration to board on Salvator-X
Nobuhiro Iwamatsu
- [U-Boot] [PATCH 1/6] ARM: rmobile: dts: Add EHCI USB nodes to r8a7796
Nobuhiro Iwamatsu
- [U-Boot] [PATCH 3/6] ARM: rmobile: Move HSUSB configuration to board on ULCB
Nobuhiro Iwamatsu
- [U-Boot] [PATCH 4/6] ARM: rmobile: Enable EHCI generic on Salvator-X
Nobuhiro Iwamatsu
- [U-Boot] [PATCH 5/6] ARM: rmobile: Enable EHCI generic on ULCB
Nobuhiro Iwamatsu
- [U-Boot] [PATCH] ARM: rmobile: Move CONFIG_CMD_ from rcar-gen3-common to configs
Nobuhiro Iwamatsu
- [U-Boot] [PATCH] ARM: dts: rmobile: Update DTS to match Linux 4.13
Nobuhiro Iwamatsu
- [U-Boot] [PATCH] ARM: rmobile: dts: Add XHCI USB node to r8a7796
Nobuhiro Iwamatsu
- [U-Boot] [PATCH] serial: serial_sh: take into account port->clk_mode for SH7785/7786
Nobuhiro Iwamatsu
- [U-Boot] [PATCH 6/6] usb: Drop the EHCI RCar Gen3
Nobuhiro Iwamatsu
- [U-Boot] [PATCH] ARM: rmobile: Enable DM regulator support
Nobuhiro Iwamatsu
- [U-Boot] [PATCH][v2]board/ls2080ardb: Update board env based on SoC
Priyanka Jain
- [U-Boot] [PATCH][v3]board/ls2080ardb: Update board env based on SoC
Priyanka Jain
- [U-Boot] [PATCH][v2]board/ls2080ardb: Update board env based on SoC
Priyanka Jain
- [U-Boot] [PATCH] board/ls2080ardb: Add mcmemsize variable in default env
Priyanka Jain
- [U-Boot] [OE-core] [PATCH] u-boot: Upgrade to 2017.09
Martin Jansa
- [U-Boot] [OE-core] [PATCH] u-boot: Upgrade to 2017.09
Martin Jansa
- [U-Boot] [OE-core] [PATCH] u-boot: Upgrade to 2017.09
Martin Jansa
- [U-Boot] [OE-core] [PATCH] u-boot: Upgrade to 2017.09
Martin Jansa
- [U-Boot] [OE-core] [PATCH] u-boot: Upgrade to 2017.09
Martin Jansa
- [U-Boot] u-boot Boot issue about rk3188
Paweł Jarosz
- [U-Boot] u-boot Boot issue about rk3188
Paweł Jarosz
- [U-Boot] u-boot Boot issue about rk3188
Paweł Jarosz
- [U-Boot] [PATCH] sunxi: Change SUNXI_GMAC to SUN7I_GMAC in sources
Mark Kettenis
- [U-Boot] [PATCH 1/5] dm: video: bridge: add operation to read EDID
Vasily Khoruzhick
- [U-Boot] [PATCH 2/5] video: anx9804: split out registers definitions into a separate header
Vasily Khoruzhick
- [U-Boot] [PATCH 3/5] video: add anx6345 DM driver
Vasily Khoruzhick
- [U-Boot] [PATCH 4/5] sunxi: video: split out PLL code
Vasily Khoruzhick
- [U-Boot] [PATCH 5/5] sunxi: video: add LCD support to DE2 driver
Vasily Khoruzhick
- [U-Boot] [PATCH 1/3] pwm: sunxi: add support for PWM found on Allwinner A64 and H3
Vasily Khoruzhick
- [U-Boot] [PATCH 2/3] video: pwm_backlight: make regulator optional
Vasily Khoruzhick
- [U-Boot] [PATCH 3/3] dts: sunxi: add PWM node for sun50i
Vasily Khoruzhick
- [U-Boot] [PATCH 1/5] dm: video: bridge: add operation to read EDID
Vasily Khoruzhick
- [U-Boot] [PATCH 1/3] pwm: sunxi: add support for PWM found on Allwinner A64 and H3
Vasily Khoruzhick
- [U-Boot] [RESEND PATCH 1/5] dm: video: bridge: add operation to read EDID
Vasily Khoruzhick
- [U-Boot] [RESEND PATCH 2/5] video: anx9804: split out registers definitions into a separate header
Vasily Khoruzhick
- [U-Boot] [RESEND PATCH 3/5] video: add anx6345 DM driver
Vasily Khoruzhick
- [U-Boot] [RESEND PATCH 4/5] sunxi: video: split out PLL code
Vasily Khoruzhick
- [U-Boot] [RESEND PATCH 5/5] sunxi: video: add LCD support to DE2 driver
Vasily Khoruzhick
- [U-Boot] [RESEND PATCH 1/3] pwm: sunxi: add support for PWM found on Allwinner A64 and H3
Vasily Khoruzhick
- [U-Boot] [RESEND PATCH 2/3] video: pwm_backlight: make regulator optional
Vasily Khoruzhick
- [U-Boot] [RESEND PATCH 3/3] dts: sunxi: add PWM node for sun50i
Vasily Khoruzhick
- [U-Boot] [RESEND PATCH 5/5] sunxi: video: add LCD support to DE2 driver
Vasily Khoruzhick
- [U-Boot] [RESEND PATCH 5/5] sunxi: video: add LCD support to DE2 driver
Vasily Khoruzhick
- [U-Boot] [PATCH v3 0/3] sunxi: add PWM driver for H3 and A64
Vasily Khoruzhick
- [U-Boot] [PATCH v2 1/3] pwm: sunxi: add support for PWM found on Allwinner A64 and H3
Vasily Khoruzhick
- [U-Boot] [PATCH v2 2/3] video: pwm_backlight: make regulator optional
Vasily Khoruzhick
- [U-Boot] [PATCH v2 3/3] dts: sunxi: add PWM node for sun50i
Vasily Khoruzhick
- [U-Boot] [PATCH v3 0/3] sunxi: add PWM driver for H3 and A64
Vasily Khoruzhick
- [U-Boot] [PATCH v2 0/5] sunxi: video: add DE2 LCD and ANX6345 drivers
Vasily Khoruzhick
- [U-Boot] [PATCH v2 1/5] dm: video: bridge: add operation to read EDID
Vasily Khoruzhick
- [U-Boot] [PATCH v2 2/5] video: anx9804: split out registers definitions into a separate header
Vasily Khoruzhick
- [U-Boot] [PATCH v2 3/5] video: add anx6345 DM driver
Vasily Khoruzhick
- [U-Boot] [PATCH v2 4/5] sunxi: video: split out PLL configuration code
Vasily Khoruzhick
- [U-Boot] [PATCH v2 5/5] sunxi: video: add LCD support to DE2 driver
Vasily Khoruzhick
- [U-Boot] [RESEND PATCH 5/5] sunxi: video: add LCD support to DE2 driver
Vasily Khoruzhick
- [U-Boot] [PATCH v2 3/3] dts: sunxi: add PWM node for sun50i
Vasily Khoruzhick
- [U-Boot] [RESEND PATCH 5/5] sunxi: video: add LCD support to DE2 driver
Vasily Khoruzhick
- [U-Boot] [PATCH] spl: spl_mmc: add __maybe_unused to mmc_load_image_raw_sector()
Seung-Woo Kim
- [U-Boot] [PATCH V2] imx: mx7: Add support for USB and normal boot modes
Troy Kisky
- [U-Boot] [PATCH] net/tftp: fix build if CMD_BOOTEFI is not set
Jörg Krause
- [U-Boot] [PATCH v2] net/tftp: fix build if CMD_BOOTEFI is not set
Jörg Krause
- [U-Boot] [PATCH] gpio: Kconfig: DM_GPIO depends on OF_CONTROL
Jörg Krause
- [U-Boot] [PATCH] imx6: disable clock command and print_cpuinfo code in SPL
Max Krummenacher
- [U-Boot] [PATCH 0/2] configs: apalis/colibri imx6: don't configure video in spl
Max Krummenacher
- [U-Boot] [PATCH 1/2] configs: colibri_imx6: don't configure video in spl
Max Krummenacher
- [U-Boot] [PATCH 2/2] configs: apalis_imx6: don't configure video in spl
Max Krummenacher
- [U-Boot] [PATCH 5/6] apalis_imx6: Avoid calling setup_display() from SPL code
Max Krummenacher
- [U-Boot] [PATCH 6/6] colibri_imx6: Avoid calling setup_display() from SPL code
Max Krummenacher
- [U-Boot] [PATCH] MAINTAINERS: board: qcom: db410c: Maintainer changed
Mateusz Kulikowski
- [U-Boot] [PATCH 1/2] ls1088ardb: Enable USB command RDB qspi-boot
Ashish Kumar
- [U-Boot] [PATCH 2/2] ls1088aqds: Enable USB command on QDS for qspi-boot
Ashish Kumar
- [U-Boot] [PATCH 1/2] ls1088ardb: Add SCSI related configs in header file for RDB
Ashish Kumar
- [U-Boot] [PATCH 2/2] ls1088aqds: Add SCSI related configs in header file for qds
Ashish Kumar
- [U-Boot] [PATCH 2/2] ls1088aqds: Enable USB command on QDS for qspi-boot
Ashish Kumar
- [U-Boot] [PATCH] test/overlay: Fix various malloc/free leaks
Langer, Thomas
- [U-Boot] [PATCH v5 4/9] armv8: Add workaround for USB erratum A-008997
Michael Lawnick
- [U-Boot] [linux-sunxi] Re: [PATCH v3 2/3] video: add an option for video simplefb via DT
Vincent Legoll
- [U-Boot] [U-Boot,2/3] imx: mx6: correct IPU clock
Ye Li
- [U-Boot] [PATCH] armv8: ls1043a: disable IFC in SPL only when QSPI is used
Y.b. Lu
- [U-Boot] [PATCH] armv8: ls1043ardb: disable PPA loading during SPL stage for SD boot
Y.b. Lu
- [U-Boot] [PATCH] armv8: ls1043a: disable IFC in SPL only when QSPI is used
Yangbo Lu
- [U-Boot] [v2] armv8: ls1043a: disable IFC in SPL only when QSPI is used
Yangbo Lu
- [U-Boot] [PATCH] armv8: ls1043ardb: disable PPA loading during SPL stage for SD boot
Yangbo Lu
- [U-Boot] [PATCH] armv8: ls1046ardb: disable PPA loading during SPL stage for SD boot
Yangbo Lu
- [U-Boot] [PATCH v2 3/9] dm: clk: add clk driver support for stm32h7 SoCs
Vikas MANOCHA
- [U-Boot] [PATCH v1 0/6] Update stm32x7 serial driver
Vikas MANOCHA
- [U-Boot] [OE-core] [PATCH] u-boot: Upgrade to 2017.09
Randy MacLeod
- [U-Boot] [PATCH 1/1] kconfiglib: update with 'imply' support
Ulf Magnusson
- [U-Boot] [PATCH v2 0/1] Update Kconfiglib with 'imply' support
Ulf Magnusson
- [U-Boot] [PATCH v2 1/1] kconfiglib: update with 'imply' support
Ulf Magnusson
- [U-Boot] [PATCH] drivers: mmc: Avoid memory leak in case of failure
Suniel Mahesh
- [U-Boot] [PATCH] git: mailrc: Update e-mail address
Lukasz Majewski
- [U-Boot] [PATCH] Kconfig: BOOTCOMMAND: Define default set of boot commands in Kconfig
Lukasz Majewski
- [U-Boot] [PATCH] sf: bar: Clean BA24 Bank Address Register bit after read/write/erase operation
Lukasz Majewski
- [U-Boot] [PATCH v2] sf: bar: Clean BA24 Bank Address Register bit after read/write/erase operation
Lukasz Majewski
- [U-Boot] [PATCH] net: phy: marvell: Add functions to read PHY's extended registers
Lukasz Majewski
- [U-Boot] [PATCH 1/1] usb: gadget: g_dnl: Use serial# variable to set g_dnl_serial
Łukasz Majewski
- [U-Boot] [PATCH 1/1] usb: gadget: g_dnl: Use serial# variable to set g_dnl_serial
Łukasz Majewski
- [U-Boot] [PATCH v3 1/1] usb: gadget: g_dnl: Sync internal SN variable with env
Łukasz Majewski
- [U-Boot] [PATCH v2 1/8] fs/fat: split out helper to init fsdata
Łukasz Majewski
- [U-Boot] [PATCH v2 2/8] fs/fat: introduce new director iterators
Łukasz Majewski
- [U-Boot] [PATCH v2 3/8] fat/fs: convert to directory iterators
Łukasz Majewski
- [U-Boot] [PATCH v2 4/8] fs: add fs_readdir()
Łukasz Majewski
- [U-Boot] [PATCH v2 5/8] fs/fat: implement opendir/readdir/closedir
Łukasz Majewski
- [U-Boot] [PATCH v2 7/8] fat/fs: move ls to generic implementation
Łukasz Majewski
- [U-Boot] [PATCH v2 8/8] fs/fat: fix case for FAT shortnames
Łukasz Majewski
- [U-Boot] [RFC] toradex: imx6: Move g_dnl_bind_fixup() into common SPL code
Łukasz Majewski
- [U-Boot] [PATCH 1/9] lib: Add CRC32-C
Łukasz Majewski
- [U-Boot] [PATCH v2 1/8] fs/fat: split out helper to init fsdata
Łukasz Majewski
- [U-Boot] [PATCH v3 1/1] usb: gadget: g_dnl: Sync internal SN variable with env
Łukasz Majewski
- [U-Boot] [PATCH v3 08/14] fit: fdt overlays doc
Łukasz Majewski
- [U-Boot] [PATCH v3 09/14] doc: Document how to apply fdt overlays
Łukasz Majewski
- [U-Boot] [PATCH v3 10/14] doc: overlays: Tweak documentation regarding overlays
Łukasz Majewski
- [U-Boot] [PATCH 06/13] usb: gadget: usb_ether: Move settings to common
Łukasz Majewski
- [U-Boot] [PATCH 05/13] usb: gadget: Make g_dnl USB settings common
Łukasz Majewski
- [U-Boot] [PATCH] Kconfig: BOOTCOMMAND: Define default set of boot commands in Kconfig
Łukasz Majewski
- [U-Boot] [U-Boot,V9,1/4] usb: rockchip: add the rockusb gadget
Łukasz Majewski
- [U-Boot] [U-Boot,V9,1/4] usb: rockchip: add the rockusb gadget
Łukasz Majewski
- [U-Boot] [PATCH v2 01/14] usb: gadget: Move USBNET_DEVADDR option out of g_dnl
Łukasz Majewski
- [U-Boot] [PATCH v2 02/14] usb: gadget: Document USBNET_DEVADDR
Łukasz Majewski
- [U-Boot] [PATCH v2 03/14] usb: gadget: Move USBNET_HOST_ADDR to Kconfig
Łukasz Majewski
- [U-Boot] [PATCH v2 04/14] usb: gadget: Convert USB_ETHER to Kconfig
Łukasz Majewski
- [U-Boot] [PATCH v2 05/14] usb: gadget: usb_ether: Move the interfaces to Kconfig
Łukasz Majewski
- [U-Boot] [PATCH v2 08/14] sunxi: provide default USB gadget setup
Łukasz Majewski
- [U-Boot] [PATCH v2 09/14] sunxi: imply USB_GADGET
Łukasz Majewski
- [U-Boot] [PATCH v2 10/14] cmd: fastboot: Rework fastboot dependency
Łukasz Majewski
- [U-Boot] [PATCH v2 11/14] musb: sunxi: switch to the device model
Łukasz Majewski
- [U-Boot] [PATCH v2 12/14] sunxi: Register usb_ether
Łukasz Majewski
- [U-Boot] [PATCH v2 13/14] sunxi: Imply USB_ETHER
Łukasz Majewski
- [U-Boot] [PATCH v2 14/14] sunxi: sina33: Sync the device tree with the kernel
Łukasz Majewski
- [U-Boot] [PATCH v2 00/14] sunxi: convert musb to the device model and enable usb_ether
Łukasz Majewski
- [U-Boot] [GIT] Pull request: u-boot-dfu
Łukasz Majewski
- [U-Boot] [PATCH] fs/fat: fix fatbuf leak
Łukasz Majewski
- [U-Boot] [PATCH] sf: bar: Clean BA24 Bank Address Register bit after read/write/erase operation
Łukasz Majewski
- [U-Boot] [OE-core] [PATCH] u-boot: Upgrade to 2017.09
Łukasz Majewski
- [U-Boot] [PATCH] sf: bar: Clean BA24 Bank Address Register bit after read/write/erase operation
Łukasz Majewski
- [U-Boot] Makefile: Update minimum dtc version to 1.4.3
Łukasz Majewski
- [U-Boot] Makefile: Update minimum dtc version to 1.4.3
Łukasz Majewski
- [U-Boot] [PATCH 0/5] Follow the Linux Kernel in building dtc as needed
Łukasz Majewski
- [U-Boot] Make Menuconfig Fails
Łukasz Majewski
- [U-Boot] [PATCH] GPT: fix memory leaks identified by Coverity
Łukasz Majewski
- [U-Boot] Pull request: u-boot-spi/master
Łukasz Majewski
- [U-Boot] [PATCH] sf: bar: Clean BA24 Bank Address Register bit after read/write/erase operation
Łukasz Majewski
- [U-Boot] [PATCH v2 5/7] armv8: layerscape: Eanble falcon boot
Łukasz Majewski
- [U-Boot] [PATCH v2] sf: bar: Clean BA24 Bank Address Register bit after read/write/erase operation
Łukasz Majewski
- [U-Boot] [PATCH v2] sf: bar: Clean BA24 Bank Address Register bit after read/write/erase operation
Łukasz Majewski
- [U-Boot] [PATCH v2] sf: bar: Clean BA24 Bank Address Register bit after read/write/erase operation
Łukasz Majewski
- [U-Boot] [PATCH v2] sf: bar: Clean BA24 Bank Address Register bit after read/write/erase operation
Łukasz Majewski
- [U-Boot] [PATCH v3 4/7] armv8: ls1043ardb: Use static DDR setting for SPL boot
Łukasz Majewski
- [U-Boot] [PATCH v3 5/7] armv8: layerscape: Enable falcon boot
Łukasz Majewski
- [U-Boot] Patman - Submitting to mailing list
Łukasz Majewski
- [U-Boot] [PATCH v3 4/7] armv8: ls1043ardb: Use static DDR setting for SPL boot
Łukasz Majewski
- [U-Boot] [PATCH] Kconfig: BOOTCOMMAND: Define default set of boot commands in Kconfig
Łukasz Majewski
- [U-Boot] [PATCH v2 1/9] pinctrl: stm32: add stm32h743-pinctrl compatible
Vikas Manocha
- [U-Boot] [PATCH v2 2/9] serial: stm32x7: add STM32H7 support
Vikas Manocha
- [U-Boot] [PATCH v2 3/9] dm: clk: add clk driver support for stm32h7 SoCs
Vikas Manocha
- [U-Boot] [PATCH 0/4] cl-som-imx7: initial support
Uri Mashiach
- [U-Boot] [PATCH 1/4] imx: mx7: fix the CCM_ macros
Uri Mashiach
- [U-Boot] [PATCH 2/4] imx: mx7: DDR controller configuration for the i.MX7 architecture
Uri Mashiach
- [U-Boot] [PATCH 3/4] imx: mx7: SPL support for i.MX7
Uri Mashiach
- [U-Boot] [PATCH 4/4] arm: imx7d: add support for Compulab cl-som-imx7
Uri Mashiach
- [U-Boot] [PATCH 1/1] sunxi: Add support for A20-OLinuXino-MICRO-eMMC
Stefan Mavrodiev
- [U-Boot] [PATCH 1/1] sunxi: Add support for A20-OLinuXino-MICRO-eMMC
Stefan Mavrodiev
- [U-Boot] [PATCH 1/1] sunxi: Add support for A20-OLinuXino-MICRO-eMMC
Stefan Mavrodiev
- [U-Boot] [PATCH v2 1/1] sunxi: Add support for A20-OLinuXino-MICRO-eMMC
Stefan Mavrodiev
- [U-Boot] [PATCH 1/1] sunxi: Fix A20-OLinuXino-MICRO dts for LAN8710
Stefan Mavrodiev
- [U-Boot] [PATCH 1/1] sunxi: Fix A20-OLinuXino-MICRO dts for LAN8710
Stefan Mavrodiev
- [U-Boot] [PATCH] ARM: zynq: Add support for SYZYGY Hub board
Tom McLeod
- [U-Boot] [PATCH] ARM: zynq: Add support for SYZYGY Hub board
Tom McLeod
- [U-Boot] [PATCH] ARM: zynq: Add support for SYZYGY Hub board
Tom McLeod
- [U-Boot] [PATCH v2] ARM: zynq: Add support for SYZYGY Hub board
Tom McLeod
- [U-Boot] [PATCH 2/2] ARM: Add a new arch + board for QEMU's 'virt' machine
Bin Meng
- [U-Boot] [PATCH 1/2] x86: ich-spi: Remove useless assignment in ich_spi_xfer()
Bin Meng
- [U-Boot] [PATCH 2/2] x86: ich-spi: Clear atomic preop only when SPI settings are not locked
Bin Meng
- [U-Boot] [PATCH] x86: baytrail: acpi: Add full reset bit to the reset register value in FADT
Bin Meng
- [U-Boot] [PATCH 1/5] pci: xilinx: Fix doc comments on config space accessors
Bin Meng
- [U-Boot] [PATCH 2/5] pci: xilinx: Remove unused field 'hose' from struct xilinx_pcie
Bin Meng
- [U-Boot] [PATCH 3/5] pci: tegra: Remove unused field 'hose' from struct tegra_pcie
Bin Meng
- [U-Boot] [PATCH 4/5] pci: layerscape: Remove unused field 'hose' from struct ls_pcie
Bin Meng
- [U-Boot] [PATCH 5/5] pci: Remove unnecessary 'default n' from Kconfig
Bin Meng
- [U-Boot] [PATCH 1/3] nvme: Fix wrong ndev->queues memset
Bin Meng
- [U-Boot] [PATCH 2/3] nvme: Fix potential sign extension issue in nvme_blk_rw()
Bin Meng
- [U-Boot] [PATCH 3/3] nvme: Remove dead codes in nvme_setup_io_queues()
Bin Meng
- [U-Boot] [PATCH] part: mac: Suppress the error message after reading ddb
Bin Meng
- [U-Boot] [PATCH 1/3] block: ide: Drop CONFIG_IDE_INIT_POSTRESET
Bin Meng
- [U-Boot] [PATCH 2/3] block: ide: Drop CONFIG_IDE_LED
Bin Meng
- [U-Boot] [PATCH 3/3] block: Drop the ftide020 driver
Bin Meng
- [U-Boot] [PATCH] x86: theadorable-x86-common: Remove "ip=dhcp" from default environment
Bin Meng
- [U-Boot] Please pull u-boot-x86
Bin Meng
- [U-Boot] [PATCH 01/13] x86: tsc: Add Airmont reference clock values
Bin Meng
- [U-Boot] [PATCH 02/13] x86: fsp: Update struct common_buf for FSP spec 1.1
Bin Meng
- [U-Boot] [PATCH 03/13] x86: fsp: Add FSP_GRAPHICS_INFO_HOB
Bin Meng
- [U-Boot] [PATCH 04/13] x86: Add Video BIOS Table (VBT) related Kconfig options
Bin Meng
- [U-Boot] [PATCH 05/13] tools: binman: Add a new entry type for Intel VBT
Bin Meng
- [U-Boot] [PATCH 06/13] x86: dts: Include Intel Video BIOS Table in the ROM image
Bin Meng
- [U-Boot] [PATCH 07/13] x86: dm: video: Add a framebuffer driver that utilizes VBT
Bin Meng
- [U-Boot] [PATCH 08/13] x86: fsp: Update fsp command to show spec 1.1 header
Bin Meng
- [U-Boot] [PATCH v1 1/2] x86: tangier: Enable ACPI support for Intel Tangier
Bin Meng
- [U-Boot] [PATCH v1 2/2] x86: edison: Bring ACPI minimal support to the board
Bin Meng
- [U-Boot] [PATCH 1/2] Makefile: Quiesce libfdt build
Bin Meng
- [U-Boot] [PATCH 2/2] Makefile: Suppress output of python libfdt build command
Bin Meng
- [U-Boot] [PATCH v2] part: mac: Suppress the error message after reading ddb
Bin Meng
- [U-Boot] [PATCH 1/2] tools: .gitignore: Sort in alphabetical order
Bin Meng
- [U-Boot] [PATCH 2/2] tools: .gitignore: Add libfdt related files
Bin Meng
- [U-Boot] ** Can't read Driver Desriptor Block **
Bin Meng
- [U-Boot] [PATCH 1/4] blk: Use macros for block device vendor/product/rev string size
Bin Meng
- [U-Boot] [PATCH 2/4] block: ide: Fix block read/write with driver model
Bin Meng
- [U-Boot] [PATCH 3/4] block: ide: Don't bother to create BLK device if no CDROM inserted
Bin Meng
- [U-Boot] [PATCH 4/4] cmd: ide: Make the first device the default one
Bin Meng
- [U-Boot] ** Can't read Driver Desriptor Block **
Bin Meng
- [U-Boot] ** Can't read Driver Desriptor Block **
Bin Meng
- [U-Boot] [PATCH v2 1/4] blk: Use macros for block device vendor/product/rev string size
Bin Meng
- [U-Boot] [PATCH v2 2/4] block: ide: Fix block read/write with driver model
Bin Meng
- [U-Boot] [PATCH v2 3/4] block: ide: Don't bother to create BLK device if no CDROM inserted
Bin Meng
- [U-Boot] [PATCH v2 4/4] cmd: ide: Make the first device the default one
Bin Meng
- [U-Boot] [PATCH] gitignore: add intermediates from libfdt build
Bin Meng
- [U-Boot] [PATCH v2 2/4] block: ide: Fix block read/write with driver model
Bin Meng
- [U-Boot] [PATCH v2 3/4] block: ide: Don't bother to create BLK device if no CDROM inserted
Bin Meng
- [U-Boot] [PATCH] gitignore: add intermediates from libfdt build
Bin Meng
- [U-Boot] [PATCH v2 1/2] tools: .gitignore: Sort in alphabetical order
Bin Meng
- [U-Boot] [PATCH v2 2/2] tools: .gitignore: Add libfdt related files
Bin Meng
- [U-Boot] [PATCH v3 1/4] blk: Use macros for block device vendor/product/rev string size
Bin Meng
- [U-Boot] [PATCH v3 2/4] block: ide: Fix block read/write with driver model
Bin Meng
- [U-Boot] [PATCH v3 3/4] block: ide: Don't bother to create BLK device if no CDROM inserted
Bin Meng
- [U-Boot] [PATCH v3 4/4] cmd: ide: Make the first device the default one
Bin Meng
- [U-Boot] [PATCH 1/5] dm: usb: Add a new USB controller operation 'get_max_xfer_size'
Bin Meng
- [U-Boot] [PATCH 2/5] dm: usb: xhci: Implement get_max_xfer_size() operation
Bin Meng
- [U-Boot] [PATCH 3/5] dm: usb: ehci: Implement get_max_xfer_size() operation
Bin Meng
- [U-Boot] [PATCH 4/5] usb: storage: Refactor to use max_xfer_blk from struct us_data
Bin Meng
- [U-Boot] [PATCH 5/5] dm: usb: storage: Fix broken read/write when both EHCD and xHCD are enabled
Bin Meng
- [U-Boot] [PATCH v3 2/4] block: ide: Fix block read/write with driver model
Bin Meng
- [U-Boot] Building qemu-x86_64_defconfig fails: u-boot-spl-nodtb.bin of 4, 293, 642, 704 bytes
Bin Meng
- [U-Boot] [PATCH v3 2/4] block: ide: Fix block read/write with driver model
Bin Meng
- [U-Boot] [PATCH v4 1/4] blk: Use macros for block device vendor/product/rev string size
Bin Meng
- [U-Boot] [PATCH v4 2/4] block: ide: Fix block read/write with driver model
Bin Meng
- [U-Boot] [PATCH v4 3/4] block: ide: Don't bother to create BLK device if no CDROM inserted
Bin Meng
- [U-Boot] [PATCH v4 4/4] cmd: ide: Make the first device the default one
Bin Meng
- [U-Boot] Building qemu-x86_64_defconfig fails: u-boot-spl-nodtb.bin of 4, 293, 642, 704 bytes
Bin Meng
- [U-Boot] Building qemu-x86_64_defconfig fails: u-boot-spl-nodtb.bin of 4, 293, 642, 704 bytes
Bin Meng
- [U-Boot] [RFC 1/1] efi_loader: fix building of helloworld.efi on x86_64
Bin Meng
- [U-Boot] [PATCH v3 1/6] board_f: Drop the timer after relocation
Bin Meng
- [U-Boot] [PATCH v3 5/6] bootstage: Provide a separate record count setting for SPL
Bin Meng
- [U-Boot] [PATCH v2 3/6] dm: x86: Update timer_get_boot_us to work before DM is ready
Bin Meng
- [U-Boot] [PATCH 5/5] x86: fsp: Configure SPI opcode registers before SPI is locked down
Bin Meng
- [U-Boot] [PATCH 11/13] x86: braswell: Add FSP configuration
Bin Meng
- [U-Boot] patman complains "ConfigParser.NoSectionError: No section: 'bounces'"
Bin Meng
- [U-Boot] [PATCH v2] blk: Remove various places that do flush cache after read
Bin Meng
- [U-Boot] [PATCH v2] cmd: blk: Use LBAFU in the common block command
Bin Meng
- [U-Boot] Compile failure encountered on latest (2017-07-20) git://git.denx.de/u-boot-usb.git branch master for target ls1021atwr_nor_defconfig
Bin Meng
- [U-Boot] [PATCH] patman: Fix error when the email blacklist is missing
Bin Meng
- [U-Boot] [PATCH 1/1] spl: u-boot-spl-nodtb.bin: remove .got and .got.plt sections
Bin Meng
- [U-Boot] [PATCH] usb: xhci: Set number of event segments and entries to 1
Bin Meng
- [U-Boot] [PATCH] usb: kbd: Set a default polling mechanism for USB keyboard
Bin Meng
- [U-Boot] [PATCH] usb: kbd: Set a default polling mechanism for USB keyboard
Bin Meng
- [U-Boot] [PATCH 1/2] ls1088ardb: Enable USB command RDB qspi-boot
Bin Meng
- [U-Boot] [PATCH 2/2] ls1088aqds: Enable USB command on QDS for qspi-boot
Bin Meng
- [U-Boot] [PATCH v2] cmd: blk: Use LBAFU in the common block command
Bin Meng
- [U-Boot] [PATCH v2] blk: Remove various places that do flush cache after read
Bin Meng
- [U-Boot] [PATCH v1] cmd: usb: add blk devices to ignore list in tree graph
Bin Meng
- [U-Boot] [PATCH] net/tftp: fix build if CMD_BOOTEFI is not set
Bin Meng
- [U-Boot] [PATCH v2] net/tftp: fix build if CMD_BOOTEFI is not set
Bin Meng
- [U-Boot] [PATCH 1/1] x86: ivybridge: remove unused variables
Bin Meng
- [U-Boot] [PATCH 09/13] x86: Add Intel Braswell SoC support
Bin Meng
- [U-Boot] [PATCH 10/13] x86: braswell: Add microcode for B0/C0/D0 stepping SoC
Bin Meng
- [U-Boot] [PATCH 11/13] x86: braswell: Add FSP configuration
Bin Meng
- [U-Boot] [PATCH 12/13] x86: braswell: Disable PUNIT power configuration for B0 stepping
Bin Meng
- [U-Boot] [PATCH 13/13] x86: Support Intel Cherry Hill board
Bin Meng
- [U-Boot] [PATCH v3 1/6] board_f: Drop the timer after relocation
Bin Meng
- [U-Boot] [PATCH v3 2/6] dm: x86: Allow TSC timer to be used before DM is ready
Bin Meng
- [U-Boot] [PATCH v3 3/6] dm: x86: Update timer_get_boot_us to work before DM is ready
Bin Meng
- [U-Boot] [PATCH v3 4/6] bootstage: Drop unused options
Bin Meng
- [U-Boot] [PATCH v3 5/6] bootstage: Provide a separate record count setting for SPL
Bin Meng
- [U-Boot] [PATCH v3 6/6] x86: Enable early timer for chromebook_link
Bin Meng
- [U-Boot] [PATCH 1/1] x86: ivybridge: remove unused variables
Bin Meng
- [U-Boot] Please pull u-boot-x86
Bin Meng
- [U-Boot] [PATCH 01/13] Revert "sandbox: remove os_putc() and os_puts()"
Bin Meng
- [U-Boot] [PATCH 02/13] Revert "sandbox: Drop special case console code for sandbox"
Bin Meng
- [U-Boot] [PATCH 03/13] Move debug and logging support to a separate header
Bin Meng
- [U-Boot] [PATCH 04/13] mtdparts: Correct use of debug()
Bin Meng
- [U-Boot] [PATCH 05/13] Drop the log buffer
Bin Meng
- [U-Boot] [PATCH 06/13] log: Add an implemention of logging
Bin Meng
- [U-Boot] [PATCH 07/13] log: Add a console driver
Bin Meng
- [U-Boot] [PATCH 08/13] log: Add a 'log level' command
Bin Meng
- [U-Boot] [PATCH 09/13] log: Add a test command
Bin Meng
- [U-Boot] [PATCH 10/13] log: Plumb logging into the init sequence
Bin Meng
- [U-Boot] [PATCH 11/13] log: sandbox: Enable logging
Bin Meng
- [U-Boot] [PATCH 13/13] log: Add documentation
Bin Meng
- [U-Boot] [PATCH 00/14] usb: xhci: Add interrupt transfer support and full speed device support
Bin Meng
- [U-Boot] [PATCH 01/14] dm: usb: Fix broken usb_stop()
Bin Meng
- [U-Boot] [PATCH 02/14] dm: usb: Remove no longer needed blk_unbind_all()
Bin Meng
- [U-Boot] [PATCH 03/14] usb: xhci: Don't assume LS/FS devices are always behind a HS hub
Bin Meng
- [U-Boot] [PATCH 04/14] usb: Handle audio extension endpoint descriptor in usb_parse_config()
Bin Meng
- [U-Boot] [PATCH 05/14] usb: xhci: Add interrupt transfer support
Bin Meng
- [U-Boot] [PATCH 06/14] usb: Only get 64 bytes device descriptor for full speed devices
Bin Meng
- [U-Boot] [PATCH 07/14] usb: Read device descriptor after device is addressed for xHCI
Bin Meng
- [U-Boot] [PATCH 08/14] usb: xhci: Fix max packet size for full speed device endpoint 0
Bin Meng
- [U-Boot] [PATCH 09/14] usb: hub: Clear port reset before usb_hub_port_connect_change()
Bin Meng
- [U-Boot] [PATCH 10/14] usb: hub: Clear BH reset status change for a 3.0 hub
Bin Meng
- [U-Boot] [PATCH 11/14] usb: xhci: Honor endpoint's interval
Bin Meng
- [U-Boot] [PATCH 12/14] usb: xhci: Program max burst size for endpoint
Bin Meng
- [U-Boot] [PATCH 13/14] usb: xhci: Set 'Error Count' to 0 for isoch endpoints
Bin Meng
- [U-Boot] [PATCH 14/14] usb: xhci: Set 'Average TRB Length' to 8 for control endpoints
Bin Meng
- [U-Boot] [PATCH 00/14] usb: xhci: Add interrupt transfer support and full speed device support
Bin Meng
- [U-Boot] [PATCH v2] cmd: usb: add blk devices to ignore list in tree graph
Bin Meng
- [U-Boot] [PATCH 00/14] usb: xhci: Add interrupt transfer support and full speed device support
Bin Meng
- [U-Boot] [PATCH 1/1] x86: provide CONFIG_BUILD_ROM
Bin Meng
- [U-Boot] [PATCH 1/1] x86: provide CONFIG_BUILD_ROM
Bin Meng
- [U-Boot] [PATCH v3] cmd: usb: add blk devices to ignore list in tree graph
Bin Meng
- [U-Boot] [PATCH] dm: core: Round up size when allocating so that it is cache line aligned
Bin Meng
- [U-Boot] [PATCH v3] cmd: usb: add blk devices to ignore list in tree graph
Bin Meng
- [U-Boot] Sandbox 'usb start' causes segment fault
Bin Meng
- [U-Boot] [PATCH v2 1/6] pci: Add helper for implementing memory-mapped config space accesses
Bin Meng
- [U-Boot] [PATCH v2 2/6] pci: xilinx: Use pci_generic_mmap_{read, write}_config()
Bin Meng
- [U-Boot] [PATCH v2 3/6] pci: layerscape: Use pci_generic_mmap_{read, write}_config
Bin Meng
- [U-Boot] [PATCH v2 4/6] PCI: Add driver for a 'pci-host-ecam-generic' host controller
Bin Meng
- [U-Boot] [PATCH v2 5/6] ARM: Add a new arch + board for QEMU's 'virt' machine
Bin Meng
- [U-Boot] [PATCH v2 6/6] travis.yml: Add job for running test.py in qemu_arm
Bin Meng
- [U-Boot] [PATCH v3] cmd: usb: add blk devices to ignore list in tree graph
Bin Meng
- [U-Boot] Sandbox 'usb start' causes segment fault
Bin Meng
- [U-Boot] [PATCH 06/13] log: Add an implemention of logging
Bin Meng
- [U-Boot] [PATCH v4] cmd: usb: add blk devices to ignore list in tree graph
Bin Meng
- [U-Boot] [PATCH v2 1/2] ls1088ardb: Enable USB command RDB qspi-boot
Bin Meng
- [U-Boot] Armada 38x clearfog pci trouble
Bin Meng
- [U-Boot] [PATCH 06/13] log: Add an implemention of logging
Bin Meng
- [U-Boot] Makefile: Update minimum dtc version to 1.4.3
Bin Meng
- [U-Boot] [PATCH 1/1] Makefile: indicate dtc source location
Bin Meng
- [U-Boot] [PULL] u-boot-usb/master
Bin Meng
- [U-Boot] u-boot-usb/master sandbox unit test failure
Bin Meng
- [U-Boot] u-boot-usb/master sandbox unit test failure
Bin Meng
- [U-Boot] [PATCHv2] GPT: fix memory leaks identified by Coverity
Bin Meng
- [U-Boot] u-boot-usb/master sandbox unit test failure
Bin Meng
- [U-Boot] [U-Boot, 5/5] dm: usb: storage: Fix broken read/write when both EHCD and xHCD are enabled
Bin Meng
- [U-Boot] u-boot-usb/master sandbox unit test failure
Bin Meng
- [U-Boot] [PATCH] usb: storage: Fix overwritten in usb_stor_set_max_xfer_blk()
Bin Meng
- [U-Boot] [PATCH] usb: storage: Fix overwritten in usb_stor_set_max_xfer_blk()
Bin Meng
- [U-Boot] [PATCH] usb: storage: Fix overwritten in usb_stor_set_max_xfer_blk()
Bin Meng
- [U-Boot] [PATCH] dm: core: Correct address cast in dev_read_addr_ptr()
Bin Meng
- [U-Boot] [PATCH] cmd/fdt.c align data buffer to avoid unaligned word access
Bernhard Messerklinger
- [U-Boot] [User Contribution] Practical Aspects in U-Boot Programming
João Monteiro
- [U-Boot] tftp reliability
Robert Moskowitz
- [U-Boot] [PATCH 1/1] scripts/checkpatch: add missing spelling.txt
Dan Murphy
- [U-Boot] [U-Boot,2/3] imx: mx6: correct IPU clock
Eric Nelson
- [U-Boot] [U-Boot,2/3] imx: mx6: correct IPU clock
Eric Nelson
- [U-Boot] video: ipu_common: fix build error
Eric Nelson
- [U-Boot] video: ipu_common: fix build error
Eric Nelson
- [U-Boot] [PATCH v1 1/2] imx: add macro to detect whether USB has been initialized
Eric Nelson
- [U-Boot] [U-Boot,2/3] imx: mx6: correct IPU clock
Eric Nelson
- [U-Boot] [PATCH v1 1/2] imx: add macro to detect whether USB has been initialized
Eric Nelson
- [U-Boot] [PATCH v1 1/2] imx: add macro to detect whether USB has been initialized
Eric Nelson
- [U-Boot] video: ipu_common: fix build error
Eric Nelson
- [U-Boot] video: ipu_common: fix build error
Eric Nelson
- [U-Boot] [U-Boot,2/3] imx: mx6: correct IPU clock
Eric Nelson
- [U-Boot] [PATCH] ipu_common: Let the MX6 IPU clock be calculated in run-time
Eric Nelson
- [U-Boot] video: ipu_common: fix build error
Eric Nelson
- [U-Boot] [PATCH v2 1/2] imx: add macro to detect whether USB PHY is active
Eric Nelson
- [U-Boot] [PATCH v2 2/2] imx_common: detect USB serial downloader reliably
Eric Nelson
- [U-Boot] [PATCH v2 2/2] imx_common: detect USB serial downloader reliably
Eric Nelson
- [U-Boot] [PATCH v2 2/2] imx_common: detect USB serial downloader reliably
Eric Nelson
- [U-Boot] [PATCH v3 1/2] imx: add macro to detect whether USB PHY is active
Eric Nelson
- [U-Boot] [PATCH v3 1/2] imx: add macro to detect whether USB PHY is active
Eric Nelson
- [U-Boot] [PATCH v3 1/2] imx: add macro to detect whether USB PHY is active
Eric Nelson
- [U-Boot] [PATCH v3 2/2] imx_common: detect USB serial downloader reliably
Eric Nelson
- [U-Boot] Makefile: Update minimum dtc version to 1.4.3
Robert Nelson
- [U-Boot] booting sunxi in falcon mode
Bjørnar Ness
- [U-Boot] [PATCH 02/14] arm: dts: Add dts for Stratix10 SoC
Dinh Nguyen
- [U-Boot] [PATCH 02/14] arm: dts: Add dts for Stratix10 SoC
Dinh Nguyen
- [U-Boot] [PATCH 03/14] arm: socfpga: stratix10: Add Clock Manager driver for Stratix10 SoC
Dinh Nguyen
- [U-Boot] [PATCH 04/14] arm: socfpga: stratix10: Add Reset Manager driver for Stratix10 SoC
Dinh Nguyen
- [U-Boot] [PATCH 06/14] arm: socfpga: stratix10: Add misc support for Stratix10 SoC
Dinh Nguyen
- [U-Boot] [PATCH 1/3] arm: dts: da850: Migrate da850-evm DTS files from Linux 4.13-RC5
Sekhar Nori
- [U-Boot] DA850evm SPI Flash Partitions between Linux and U-boot are Inconsistent
Sekhar Nori
- [U-Boot] u-boot ubifsload & verify uImage
Johann Obermayr
- [U-Boot] u-boot ubifsload & verify uImage
Johann Obermayr
- [U-Boot] Ethernet problem with u-boot for APF27
Vincent P
- [U-Boot] [PATCH v3] patman: add support for omitting bouncing addresses
Chris Packham
- [U-Boot] [PATCH 1/2] configs: Migrate all of the existing USB symbols, except fastboot
Chris Packham
- [U-Boot] [next PATCH v2 1/2] ARM: mvebu: Add SoC IDs for Marvell's integrated CPUs
Chris Packham
- [U-Boot] [next PATCH v2 2/2] ARM: mvebu: add additional information to board_add_ram_info()
Chris Packham
- [U-Boot] [PATCH] ARM: mvebu: add SAR frequency values for 1.8/2.0GHz
Chris Packham
- [U-Boot] mv88e61xx autoneg doesn't work with new driver
Chris Packham
- [U-Boot] [PATCH] patman: Fix error when the email blacklist is missing
Chris Packham
- [U-Boot] tftp reliability
Chris Packham
- [U-Boot] DDR training code for Armada 38x
Chris Packham
- [U-Boot] DDR training code for Armada 38x
Chris Packham
- [U-Boot] [PATCH] ARM: mvebu: handle unused DRAM banks with ECC enabled
Chris Packham
- [U-Boot] [PATCH] ARM: mvebu: add SAR frequency values for 1.8/2.0GHz
Chris Packham
- [U-Boot] DDR training code for Armada 38x
Chris Packham
- [U-Boot] [PATCH v4 4/7] drivers/i2c/muxes/pca954x: Add pca9547 I2C mux support
Chris Packham
- [U-Boot] [PATCH] i2c: muxes: pca954x: look up width from chip_desc
Chris Packham
- [U-Boot] Patman - Submitting to mailing list
Chris Packham
- [U-Boot] [PATCH] i2c: muxes: pca954x: look up width from chip_desc
Chris Packham
- [U-Boot] ZynqMP qspi
Siva Durga Prasad Paladugu
- [U-Boot] [PATCH RESEND] DW SPI: Get clock value from Device Tree
Eugeniy Paltsev
- [U-Boot] Ethernet problem with u-boot for APF27
Vincent Paratte
- [U-Boot] ChormeBook Tegra TK1 HP 14 " running Mainline Kernel Linux (Ubuntu - Xenial) -- Signing Kernel Almost Done !!
Alexandre N. Perfeito
- [U-Boot] Enc: Uboot compatible with board Tegra124-nyan-big (ChromeBook G3 HP 14")
Alexandre N. Perfeito
- [U-Boot] Compiling Mainline Kernel v4.4.70 Stable to ChormeBook Nvidia Tegra TK1 (Ubuntu-Xenial) -Uboot Not Booting (BlackScreen)
Alexandre N. Perfeito
- [U-Boot] [PATCH] serial: serial_sh: take into account port->clk_mode for SH7785/7786
Thomas Petazzoni
- [U-Boot] I/O accessors on SuperH and endianness
Thomas Petazzoni
- [U-Boot] undefined reference to `environment'
Thomas Petazzoni
- [U-Boot] [PATCH] serial: serial_sh: take into account port->clk_mode for SH7785/7786
Thomas Petazzoni
- [U-Boot] [PATCH v2 0/8] imx: add USB Serial Download Protocol (SDP) support
Vincent Prince
- [U-Boot] [PATCH v2 0/8] imx: add USB Serial Download Protocol (SDP) support
Vincent Prince
- [U-Boot] [PATCH 1/1] usb: gadget: g_dnl: Use serial# variable to set g_dnl_serial
Sam Protsenko
- [U-Boot] [PATCH v2 1/1] usb: gadget: g_dnl: Sync internal SN variable with env
Sam Protsenko
- [U-Boot] [PATCH 1/1] usb: gadget: g_dnl: Use serial# variable to set g_dnl_serial
Sam Protsenko
- [U-Boot] [PATCH v2 1/1] usb: gadget: g_dnl: Sync internal SN variable with env
Sam Protsenko
- [U-Boot] [PATCH v3 1/1] usb: gadget: g_dnl: Sync internal SN variable with env
Sam Protsenko
- [U-Boot] [PATCH v3 1/1] usb: gadget: g_dnl: Sync internal SN variable with env
Sam Protsenko
- [U-Boot] [PATCH 0/4] arm: am57xx/dra7xx: Improve eMMC Linux boot
Sam Protsenko
- [U-Boot] [PATCH 1/4] arm: am57xx: Fix Linux boot from eMMC
Sam Protsenko
- [U-Boot] [PATCH 2/4] arm: dra7xx: Fix Linux boot from eMMC
Sam Protsenko
- [U-Boot] [PATCH 3/4] env: ti: boot: Extract command for eMMC Linux boot
Sam Protsenko
- [U-Boot] [PATCH 4/4] env: ti: boot: Show boot status information
Sam Protsenko
- [U-Boot] [PATCH 1/1] omap: Omit fastboot.userdata_size related errors
Sam Protsenko
- [U-Boot] [PATCH 0/4] arm: am57xx/dra7xx: Improve eMMC Linux boot
Sam Protsenko
- [U-Boot] [PATCH 0/4] arm: am57xx/dra7xx: Improve eMMC Linux boot
Sam Protsenko
- [U-Boot] [PATCH 1/2] disk: Provide API to get partition by name for specific type
Sam Protsenko
- [U-Boot] [PATCH 2/2] omap: Fix warning when looking for userdata part
Sam Protsenko
- [U-Boot] [PATCH 1/2] disk: Provide API to get partition by name for specific type
Sam Protsenko
- [U-Boot] [PATCH] scripts: Move Kconfig contents to cmd/Kconfig
Sam Protsenko
- [U-Boot] [linux-sunxi] [PATCH v2 1/2] video: sunxi: extract simplefb match code to a new file
Andre Przywara
- [U-Boot] [linux-sunxi] Re: [PATCH v3 2/3] video: add an option for video simplefb via DT
Andre Przywara
- [U-Boot] [RESEND PATCH 1/3] pwm: sunxi: add support for PWM found on Allwinner A64 and H3
Andre Przywara
- [U-Boot] [RESEND PATCH 3/3] dts: sunxi: add PWM node for sun50i
Andre Przywara
- [U-Boot] [RESEND PATCH 1/3] pwm: sunxi: add support for PWM found on Allwinner A64 and H3
Andre Przywara
- [U-Boot] [PATCH v2 1/3] pwm: sunxi: add support for PWM found on Allwinner A64 and H3
Andre Przywara
- [U-Boot] [PATCH v3 0/3] sunxi: add PWM driver for H3 and A64
Andre Przywara
- [U-Boot] [PATCH v2 3/3] dts: sunxi: add PWM node for sun50i
Andre Przywara
- [U-Boot] [PATCH] SPL: SPI: sunxi: add SPL FIT image support
Andre Przywara
- [U-Boot] [PATCH] EFI: find EFI system partition by legacy MBR partition type
André Przywara
- [U-Boot] [PATCH] sunxi: gpio: add missing compatible strings
André Przywara
- [U-Boot] mv88e61xx autoneg doesn't work with new driver
Clément Péron
- [U-Boot] mv88e61xx autoneg doesn't work with new driver
Clément Péron
- [U-Boot] Antwort: Re: QSPI "sf probe ...", "sf read ..." on Altera SoC FPGA
Clément Péron
- [U-Boot] Antwort: Re: QSPI "sf probe ...", "sf read ..." on Altera SoC FPGA
Clément Péron
- [U-Boot] strange behaviors with setexpr syntax error and '==' != '-eq"
Clément Péron
- [U-Boot] strange behaviors with setexpr syntax error and '==' != '-eq"
Clément Péron
- [U-Boot] Antwort: Re: QSPI "sf probe ...", "sf read ..." on Altera SoC FPGA
Clément Péron
- [U-Boot] [PATCH] armv8: ls1046aqds: Fix NAND offset for Fman ucode and env
Gong Qianyu
- [U-Boot] USB Ethernet with device model
Vignesh R
- [U-Boot] [PATCH v2 0/5] mmc: omap_hsmmc: Add support for ADMA
Vignesh R
- [U-Boot] [OE-core] [PATCH] u-boot: Upgrade to 2017.09
Khem Raj
- [U-Boot] [PATCH] MAINTAINERS: board: qcom: db410: Maintainer changed
Jorge Ramirez
- [U-Boot] [PATCH] MAINTAINERS: board: qcom: db410: Maintainer changed
Jorge Ramirez-Ortiz
- [U-Boot] [PATCH] MAINTAINERS: board: qcom: db410c: Maintainer changed
Jorge Ramirez-Ortiz
- [U-Boot] Altera Arria10 socfpga image usage
Andre Renaud
- [U-Boot] [ANN] U-Boot v2017.09-rc3 released
Tom Rini
- [U-Boot] [PATCH 00/23] efi_loader implement missing functions
Tom Rini
- [U-Boot] [PATCH v3] rpi: Enable USB keyboard support
Tom Rini
- [U-Boot] [PATCH] arm: am33xx: Make pin multiplexing functions optional
Tom Rini
- [U-Boot] [PATCH 0/2] Board for QEMU's '-machine virt' on ARM
Tom Rini
- [U-Boot] Pull request: u-boot-sunxi/master
Tom Rini
- [U-Boot] [GIT PULL] u-boot-uniphier/master
Tom Rini
- [U-Boot] Please pull u-boot-marvell/master
Tom Rini
- [U-Boot] [PULL] Please pull u-boot-imx
Tom Rini
- [U-Boot] Please pull u-boot-video/master
Tom Rini
- [U-Boot] Pull request: u-boot-sunxi/master
Tom Rini
- [U-Boot] Please pull u-boot-video/master
Tom Rini
- [U-Boot] [U-Boot, 1/2] configs: Migrate all of the existing USB symbols, except fastboot
Tom Rini
- [U-Boot] [U-Boot, 2/2] Kconfig: Migrate all of cmd/fastboot/Kconfig to defconfigs
Tom Rini
- [U-Boot] [PATCH] misc: Kconfig: Add SPL_I2C_EEPROM option
Tom Rini
- [U-Boot] [U-Boot, V3] Convert CONFIG_NAND_OMAP_GPMC et al to Kconfig
Tom Rini
- [U-Boot] [U-Boot, 1/2] Configs: Migrate I2C_BUS_MAX to CONFIG_SYS_I2C_BUS_MAX
Tom Rini
- [U-Boot] [U-Boot, 2/2] Convert CONFIG_SYS_I2C_BUS_MAX to Kconfig
Tom Rini
- [U-Boot] Convert CONFIG_SPL_OMAP3_ID_NAND to Kconfig
Tom Rini
- [U-Boot] Convert CONFIG_BCH to Kconfig
Tom Rini
- [U-Boot] [PATCH 1/3] nvme: Fix wrong ndev->queues memset
Tom Rini
- [U-Boot] [PATCH 2/3] nvme: Fix potential sign extension issue in nvme_blk_rw()
Tom Rini
- [U-Boot] [PATCH 3/3] nvme: Remove dead codes in nvme_setup_io_queues()
Tom Rini
- [U-Boot] omap3_logic: Move CONFIG_SYS_NAND_U_BOOT_OFFS to Kconfig
Tom Rini
- [U-Boot] Kconfig: Add EEPROM options to Kconfig when I2C_EEPROM is set
Tom Rini
- [U-Boot] Please pull u-boot-x86
Tom Rini
- [U-Boot] [U-Boot,1/4] part: efi: Fix offset
Tom Rini
- [U-Boot] [U-Boot, 2/4] part: efi: rework the partition start and size in gpt_fill_pte
Tom Rini
- [U-Boot] [U-Boot, 3/4] part: efi: make gpt_fill_pte take the device descriptor
Tom Rini
- [U-Boot] [U-Boot,4/4] part: efi: Disable overlap check
Tom Rini
- [U-Boot] [U-Boot, 1/8] include/config_fallbacks.h: add default for CONFIG_SYS_CBSIZE
Tom Rini
- [U-Boot] [U-Boot, 2/8] include/configs: remove CONFIG_SYS_CBSIZE when the default value is used
Tom Rini
- [U-Boot] [U-Boot, 3/8] include/config_fallbacks.h: change fallback for CONFIG_SYS_PBSIZE
Tom Rini
- [U-Boot] [U-Boot, 4/8] include/configs: drop default definitions of CONFIG_SYS_PBSIZE
Tom Rini
- [U-Boot] [U-Boot, 5/8] include/config_fallbacks.h: add default for CONFIG_SYS_MAXARGS
Tom Rini
- [U-Boot] [U-Boot, 6/8] include/configs: drop default definitions of CONFIG_SYS_MAXARGS
Tom Rini
- [U-Boot] [U-Boot, 7/8] include/configs: remove default values of CONFIG_SYS_BARGSIZE
Tom Rini
- [U-Boot] [U-Boot, 8/8] include/configs: remove numerous CONFIG_SYS_BARGSIZE definitions
Tom Rini
- [U-Boot] bch: don't use __BSD_VISIBLE to test for fls
Tom Rini
- [U-Boot] fix: fw_env: Prevent writing error message on special files, which don't support fsync
Tom Rini
- [U-Boot] [U-Boot,1/1] disk: part: fix typo
Tom Rini
- [U-Boot] [U-Boot,1/3] nvme: Fix wrong ndev->queues memset
Tom Rini
- [U-Boot] [U-Boot, 2/3] nvme: Fix potential sign extension issue in nvme_blk_rw()
Tom Rini
- [U-Boot] [U-Boot, 3/3] nvme: Remove dead codes in nvme_setup_io_queues()
Tom Rini
- [U-Boot] [U-Boot, 1/3] block: ide: Drop CONFIG_IDE_INIT_POSTRESET
Tom Rini
- [U-Boot] [U-Boot,2/3] block: ide: Drop CONFIG_IDE_LED
Tom Rini
- [U-Boot] [U-Boot,3/3] block: Drop the ftide020 driver
Tom Rini
- [U-Boot] [U-Boot, v3] omap3: evm: Fixes for CONFIG_NAND, SPL_OS_BOOT, USB, and environment
Tom Rini
- [U-Boot] [U-Boot,1/2] Makefile: Quiesce libfdt build
Tom Rini
- [U-Boot] [U-Boot, 2/2] Makefile: Suppress output of python libfdt build command
Tom Rini
- [U-Boot] git: mailrc: Update e-mail address
Tom Rini
- [U-Boot] crypto/fsl: fix obj-yy in Makefile
Tom Rini
- [U-Boot] [ANN] U-Boot v2017.09-rc4 released
Tom Rini
- [U-Boot] Please pull u-boot-dm
Tom Rini
- [U-Boot] Please pull u-boot-sh/rmobile branch
Tom Rini
- [U-Boot] [ANN] U-Boot v2017.09-rc4 released
Tom Rini
- [U-Boot] [ANN] U-Boot v2017.09-rc4 released
Tom Rini
- [U-Boot] [ANN] U-Boot v2017.09-rc4 released
Tom Rini
- [U-Boot] [PATCH] env: Fix out of tree building of tools-all
Tom Rini
- [U-Boot] [PULL] Please pull u-boot-rockchip/master
Tom Rini
- [U-Boot] Please pull u-boot-video/master
Tom Rini
- [U-Boot] [U-Boot,v2,1/2] env: Fix operation of 'make environ'
Tom Rini
- [U-Boot] [U-Boot, v2, 2/2] env: Add 'envtools' target to 'make help'
Tom Rini
- [U-Boot] [U-Boot, v3, 1/1] usb: gadget: g_dnl: Sync internal SN variable with env
Tom Rini
- [U-Boot] [PATCH] env: Fix out of tree building of tools-all
Tom Rini
- [U-Boot] [PATCH 1/4] blk: Use macros for block device vendor/product/rev string size
Tom Rini
- [U-Boot] [PATCH] gitignore: add intermediates from libfdt build
Tom Rini
- [U-Boot] [PATCH 0/5] vsprintf and short-wchar for EFI_LOADER
Tom Rini
- [U-Boot] [PATCH 0/5] vsprintf and short-wchar for EFI_LOADER
Tom Rini
- [U-Boot] [PATCH] arm: am33xx: Make pin multiplexing functions optional
Tom Rini
- [U-Boot] [U-Boot, v2] part: mac: Suppress the error message after reading ddb
Tom Rini
- [U-Boot] doc: remove duplicate text in README.gpt
Tom Rini
- [U-Boot] [U-Boot, v2, 1/2] tools: .gitignore: Sort in alphabetical order
Tom Rini
- [U-Boot] [U-Boot, v2, 2/2] tools: .gitignore: Add libfdt related files
Tom Rini
- [U-Boot] Revert "dm: arm: rpi: Drop CONFIG_OF_EMBED"
Tom Rini
- [U-Boot] [U-Boot, 1/1] vsprintf: vsprintf does not have parameter size
Tom Rini
- [U-Boot] [U-Boot,1/1] linker_lists: remove incorrect comment
Tom Rini
- [U-Boot] spl: typo fix for SPL_ATF_SUPPORT description
Tom Rini
- [U-Boot] Pull request: u-boot-net.git master
Tom Rini
- [U-Boot] ARM: rmobile: Fix SD divider settings on Gen3
Tom Rini
- [U-Boot] ARM: rmobile: Disable CONFIG_ARCH_FIXUP_FDT_MEMORY
Tom Rini
- [U-Boot] [PATCH] net: Correct size of NFS buffers
Tom Rini
- [U-Boot] [PULL] Please pull u-boot-rockchip/master
Tom Rini
- [U-Boot] README: Fix typo in description of CONFIG_OF_EMBED
Tom Rini
- [U-Boot] [U-Boot,v3,1/5] Kconfig: drop CONFIG_USB_ETHER_DM9601
Tom Rini
- [U-Boot] [U-Boot,v3,2/5] Kconfig: drop CONFIG_USB_ETHER_RNDIS
Tom Rini
- [U-Boot] [U-Boot, v3, 3/5] usb: net: migrate CONFIG_USB_HOST_ETHER to Kconfig
Tom Rini
- [U-Boot] [U-Boot, v3, 4/5] usb: net: migrate USB Ethernet adapters to Kconfig
Tom Rini
- [U-Boot] [U-Boot, v3, 5/5] usb: doc: update README.usb for new config options
Tom Rini
- [U-Boot] [PATCH] env: Migrate CONFIG_ENV_AES to Kconfig and deprecate
Tom Rini
- [U-Boot] [PATCH] env: Migrate CONFIG_ENV_AES to Kconfig and deprecate
Tom Rini
- [U-Boot] [PATCH] edison: Disable CONFIG_USB_HOST_ETHER
Tom Rini
- [U-Boot] [PATCH] edison: Disable CONFIG_USB_HOST_ETHER
Tom Rini
- [U-Boot] [PATCH v3 2/4] block: ide: Fix block read/write with driver model
Tom Rini
- [U-Boot] VU#166743: Das U-Boot AES-CBC encryption
Tom Rini
- [U-Boot] [PATCH v4 1/4] blk: Use macros for block device vendor/product/rev string size
Tom Rini
- [U-Boot] [PATCH v4 2/4] block: ide: Fix block read/write with driver model
Tom Rini
- [U-Boot] [PATCH v4 3/4] block: ide: Don't bother to create BLK device if no CDROM inserted
Tom Rini
- [U-Boot] [PATCH v4 4/4] cmd: ide: Make the first device the default one
Tom Rini
- [U-Boot] [PATCH] fdt: call fdt_fixup_ethernet after board/system fixups
Tom Rini
- [U-Boot] [PATCH] Kconfig: BOOTCOMMAND: Define default set of boot commands in Kconfig
Tom Rini
- [U-Boot] [PATCH] MAINTAINERS: board: qcom: db410c: Maintainer changed
Tom Rini
- [U-Boot] [ANN] U-Boot v2017.09 is released
Tom Rini
- [U-Boot] [U-Boot, 1/2] clk: at91: utmi: Set the reference clock frequency
Tom Rini
- [U-Boot] [U-Boot, v2, 01/13] arm: omap5+: Add board specific ldo powering
Tom Rini
- [U-Boot] [U-Boot, v2, 02/13] palmas: Add support for powering different ldos
Tom Rini
- [U-Boot] [U-Boot, v2, 03/13] arm: dra7: Kconfig: Select LP87565 related configs
Tom Rini
- [U-Boot] [U-Boot, v2, 04/13] arm: dra76: Add support for ES1.0 detection
Tom Rini
- [U-Boot] [U-Boot, v2, 05/13] board: ti: dra76-evm: Add epprom support
Tom Rini
- [U-Boot] [U-Boot, v2, 06/13] board: ti: dra76-evm: Add the pmic data
Tom Rini
- [U-Boot] [U-Boot,v2,07/13] board: ti: dra76-evm: Add DDR data
Tom Rini
- [U-Boot] [U-Boot, v2, 08/13] board: ti: dra76-evm: Add the pinmux data
Tom Rini
- [U-Boot] [U-Boot, v2, 09/13] board: ti: dra76-evm: Add support for powering on mmc ldo
Tom Rini
- [U-Boot] [U-Boot, v2, 10/13] env: ti: boot: Select dtb name for dra76
Tom Rini
- [U-Boot] [U-Boot, v2, 11/13] arm: dts: dra7: sync DT with latest Linux
Tom Rini
- [U-Boot] [U-Boot, v2, 12/13] arm: dts: Add u-boot specific compatibles
Tom Rini
- [U-Boot] [U-Boot,v2,13/13] board: ti: dra76: Add dt support
Tom Rini
- [U-Boot] board: ti: am571x: Add 666MHz support for AM571x IDK
Tom Rini
- [U-Boot] [U-Boot, 1/2] board: ti: am57xx: Add dt support for BeagleBoard-X15 revC
Tom Rini
- [U-Boot] [U-Boot, 2/2] env: ti: boot: Select dtb name for X15 revC
Tom Rini
- [U-Boot] [U-Boot, v4, 1/3] board: atmel: Create board/$(VENDOR)/common folder
Tom Rini
- [U-Boot] [U-Boot, v4, 2/3] board: sama5d2_xplained: Replace code to set mac address
Tom Rini
- [U-Boot] [U-Boot, v4, 3/3] board: sama5d4_xplained: Set mac address from eeprom
Tom Rini
- [U-Boot] [U-Boot,v2] misc: Kconfig: Add SPL_I2C_EEPROM option
Tom Rini
- [U-Boot] Please pull u-boot-video/master
Tom Rini
- [U-Boot] [PATCH v4 8/9] spl: dm: Make it possible for the SPL to pick its own DTB from a FIT
Tom Rini
- [U-Boot] [PATCH] Travis-CI: Update PATH
Tom Rini
- [U-Boot] DA850EVM Maintainers (abandoned?)
Tom Rini
- [U-Boot] [PATCH] ARM: davinci: Update da8xxevm Maintainers
Tom Rini
- [U-Boot] Please pull u-boot-fsl-qoriq master
Tom Rini
- [U-Boot] [PATCH] Travis-CI: Update PATH
Tom Rini
- [U-Boot] Please pull u-boot-dm
Tom Rini
- [U-Boot] [U-Boot, v2, 1/1] checkpatch: update from Linux v4.13-rc6
Tom Rini
- [U-Boot] [PATCH] ARM: davinci: Update da8xxevm Maintainers
Tom Rini
- [U-Boot] [U-Boot,1/3] image: Add TI PMMC image type
Tom Rini
- [U-Boot] [U-Boot, 2/3] ARM: k2g: Add FIT image handler for PMMC firmware
Tom Rini
- [U-Boot] [U-Boot, 3/3] configs: k2g_evm: Remove PMMC loading environment commands
Tom Rini
- [U-Boot] [U-Boot,v2,1/5] kbuild: Enable -fshort-wchar
Tom Rini
- [U-Boot] [U-Boot,v2,2/5] lib: add some utf16 handling helpers
Tom Rini
- [U-Boot] [U-Boot, v2, 3/5] vsprintf.c: add UTF-16 string (%ls) support
Tom Rini
- [U-Boot] [U-Boot,v2,4/5] vsprintf.c: add GUID printing
Tom Rini
- [U-Boot] [U-Boot,v2,5/5] examples: add fallback memcpy
Tom Rini
- [U-Boot] [U-Boot, 1/2] misc: i2c_eeprom: Add compatible for 24AA02E48
Tom Rini
- [U-Boot] [U-Boot, 2/2] misc: i2c_eeprom: Add compatible for AT24MAC402
Tom Rini
- [U-Boot] cosmetic: bootcount: correct comment for used scratch register
Tom Rini
- [U-Boot] [U-Boot, v2, 1/2] armv8: mmu: remove unused macro definition
Tom Rini
- [U-Boot] [U-Boot,v2,2/2] armv8: mmu: add space around operator
Tom Rini
- [U-Boot] [U-Boot, 1/2] ARM: OMAP3: am3517_evm: Move header to ti_omap3_common.h
Tom Rini
- [U-Boot] [U-Boot, 2/2] omap3: am3517_evm: Enable TI_COMMON_CMD_OPTION
Tom Rini
- [U-Boot] dma: import linux/dma-direction.h to consolidate enum dma_data_direction
Tom Rini
- [U-Boot] linux/io.h: import generic ioread* / iowrite* accessors from Linux
Tom Rini
- [U-Boot] davinci: da850-evm: switch to using TI_COMMON_CMD_OPTIONS
Tom Rini
- [U-Boot] ARM: DRA72x: Add support for detection of DRA71x SR 2.1
Tom Rini
- [U-Boot] Uboot send pull request
Tom Rini
- [U-Boot] [PATCH] arm: am33xx: Make pin multiplexing functions optional
Tom Rini
- [U-Boot] [PATCH] usb: kbd: Set a default polling mechanism for USB keyboard
Tom Rini
- [U-Boot] [U-Boot, 1/5] ARM: at91: Move CONFIG_AT91FAMILY option to Kconfig
Tom Rini
- [U-Boot] [U-Boot, V3, 3/5] arm: da850-evm: Enable DM and device tree support for da850-evm
Tom Rini
- [U-Boot] [U-Boot, v1] drivers: ahci: write upper 32 bits for clb and fis registers
Tom Rini
- [U-Boot] [PATCH] spl: stash bootstage info before jump to next stage
Tom Rini
- [U-Boot] [PATCH] fs/fat: fix fatbuf leak
Tom Rini
- [U-Boot] [PATCH v3 00/14] uboot overlays, FIT image & unittest
Tom Rini
- [U-Boot] Please pull u-boot-dm
Tom Rini
- [U-Boot] spl: add newline in debug output
Tom Rini
- [U-Boot] ARM: dts: ethernut5: Fix the build warning
Tom Rini
- [U-Boot] omap3: omap3_logic: Finish enabling fastboot on MUSB
Tom Rini
- [U-Boot] [U-Boot, v2] serial: nulldev: Add nulldev serial driver
Tom Rini
- [U-Boot] [U-Boot, V3] arm: dts: omap3: Re-sync DTS files with Linux 4.13-RC5
Tom Rini
- [U-Boot] include/configs: remove references to SMNAND_ENV_OFFSET
Tom Rini
- [U-Boot] [U-Boot, 1/2] davinci: da850evm: Make EEPROM MAC code configurable
Tom Rini
- [U-Boot] [U-Boot, 2/2] Convert CONFIG_MAC_ADDR_IN_SPIFLASH et al to Kconfig
Tom Rini
- [U-Boot] Convert CONFIG_EMIF4 et al to Kconfig
Tom Rini
- [U-Boot] ARM: davinci: Update da8xxevm Maintainers
Tom Rini
- [U-Boot] undefined reference to `environment'
Tom Rini
- [U-Boot] [PATCH v3 00/14] uboot overlays, FIT image & unittest
Tom Rini
- [U-Boot] [PATCH v3 00/14] uboot overlays, FIT image & unittest
Tom Rini
- [U-Boot] lib: disable hashtable and display options code in SPL
Tom Rini
- [U-Boot] [PATCH] Kconfig: BOOTCOMMAND: Define default set of boot commands in Kconfig
Tom Rini
- [U-Boot] [U-Boot, v2, 3/5] spl: fit: Eanble GZIP support for image decompression
Tom Rini
- [U-Boot] [PATCH] Travis-CI: Switch back to using the top of tree dtc
Tom Rini
- [U-Boot] [PATCH v3 00/14] uboot overlays, FIT image & unittest
Tom Rini
- [U-Boot] [PATCH v2] arm: am33xx: Make pin multiplexing functions optional
Tom Rini
- [U-Boot] [U-Boot, 1/2] clk: at91: utmi: Set the reference clock frequency
Tom Rini
- [U-Boot] [U-Boot,2/2] ARM: dts: at91: sama5: Add the sfr node
Tom Rini
- [U-Boot] [U-Boot, v6, 1/9] lib: at91: Add logo files used via API of DM_VIDEO
Tom Rini
- [U-Boot] [U-Boot, v6, 2/9] atmel: common: Add function to display via DM_VIDEO's API
Tom Rini
- [U-Boot] [U-Boot, v6, 3/9] ARM: at91: spl: Adjust switching to oscillator for SAMA5D2
Tom Rini
- [U-Boot] [U-Boot, v6, 4/9] ARM: at91: spl: Add mck function to lower rate while switching
Tom Rini
- [U-Boot] [U-Boot, v6, 5/9] board: sama5d2_xplained: Make SPL work on spiflash
Tom Rini
- [U-Boot] [U-Boot, v6, 6/9] ARM: at91: spl: Add boot device for boot from QSPI
Tom Rini
- [U-Boot] [U-Boot, v6, 7/9] ARM: at91: mach: Add missing defines of MPDDRC
Tom Rini
- [U-Boot] [U-Boot, v6, 8/9] ARM: at91: Get the Chip ID of SAMA5D2 SiP
Tom Rini
- [U-Boot] [U-Boot, v6, 9/9] board: atmel: Add SAMA5D27 SOM1 EK board
Tom Rini
- [U-Boot] [U-Boot, v3, 1/5] ARM: at91: Move CONFIG_AT91FAMILY option to Kconfig
Tom Rini
- [U-Boot] [U-Boot, v3, 2/5] ARM: at91: Add the SoC options to Kconfig
Tom Rini
- [U-Boot] [U-Boot, v3, 3/5] ARM: at91: Remove hardware.h included in configs
Tom Rini
- [U-Boot] [U-Boot, v3, 4/5] ARM: at91: spl: Add macro CONFIG_XXXX_BOOT support
Tom Rini
- [U-Boot] [U-Boot, v3, 5/5] configs: at91: Remove CONFIG_SYS_EXTRA_OPTIONS assignment
Tom Rini
- [U-Boot] [PATCH] cmd/gpt.c: Fix warning over memset args in allocate_disk_part
Tom Rini
- [U-Boot] [U-Boot, 1/2] arm: am57xx: cl-som-am57x: Use new pinctrl macros
Tom Rini
- [U-Boot] [U-Boot,2/2] ARM: DRA7: Cleanup old pinctrl macros
Tom Rini
- [U-Boot] [U-Boot, 1/2] GPT: create block device for sandbox testing
Tom Rini
- [U-Boot] [U-Boot, 2/2] add pytests for 'gpt guid' command in sandbox
Tom Rini
- [U-Boot] [U-Boot, 1/1] add pytests for 'gpt rename' and 'gpt swap'
Tom Rini
- [U-Boot] lib: strto: fix incorrect handling of specified base
Tom Rini
- [U-Boot] [U-Boot, v2, 1/1] checkpatch: update from Linux v4.13-rc6
Tom Rini
- [U-Boot] [U-Boot, v2] blk: Remove various places that do flush cache after read
Tom Rini
- [U-Boot] [U-Boot, v2] cmd: blk: Use LBAFU in the common block command
Tom Rini
- [U-Boot] [U-Boot, 1/1] checkpatch.pl: Add warning for new __packed additions
Tom Rini
- [U-Boot] [U-Boot, 1/1] test/py: u_boot_console_base.py: fix typo
Tom Rini
- [U-Boot] [PATCH] spl: fit: Fixed incompatible type warning in spl_load_fit_image()
Tom Rini
- [U-Boot] [PATCH v3 11/14] dtbo: make dtbos special
Tom Rini
- [U-Boot] [U-Boot, 1/1] add pytests for 'gpt rename' and 'gpt swap'
Tom Rini
- [U-Boot] [PATCH v3 11/14] dtbo: make dtbos special
Tom Rini
- [U-Boot] [PATCH] Makefile: Update minimum dtc version to 1.4.3
Tom Rini
- [U-Boot] [PATCH] Makefile: Update minimum dtc version to 1.4.3
Tom Rini
- [U-Boot] [PATCH] test/py: gpt: make use of infra-structure
Tom Rini
- [U-Boot] [PATCH V2] test/py: gpt: make use of infra-structure
Tom Rini
- [U-Boot] Please pull from u-boot-i2c
Tom Rini
- [U-Boot] Pull request: u-boot-ubi/master
Tom Rini
- [U-Boot] [U-Boot, v3, 1/9] fs/fat: split out helper to init fsdata
Tom Rini
- [U-Boot] [U-Boot, v3, 2/9] fs/fat: introduce new director iterators
Tom Rini
- [U-Boot] [U-Boot, v3, 3/9] fat/fs: convert to directory iterators
Tom Rini
- [U-Boot] [U-Boot,v3,4/9] fs: add fs_readdir()
Tom Rini
- [U-Boot] [U-Boot, v3, 5/9] fs/fat: implement opendir/readdir/closedir
Tom Rini
- [U-Boot] [U-Boot,v3,6/9] fat/fs: remove a bunch of dead code
Tom Rini
- [U-Boot] [U-Boot, v3, 7/9] fat/fs: move ls to generic implementation
Tom Rini
- [U-Boot] [U-Boot,v3,8/9] fs/fat: fix case for FAT shortnames
Tom Rini
- [U-Boot] [U-Boot, v3, 9/9] fs/fat: Clean up open-coded sector <-> cluster conversions
Tom Rini
- [U-Boot] fs/fat: fix fatbuf leak
Tom Rini
- [U-Boot] arm: mach-omap2: Relax checks on OP-TEE location to allow pageable image
Tom Rini
- [U-Boot] spl: Fix compiling warning on gunzip argument
Tom Rini
- [U-Boot] arm: dts: Add missing u-boot specific dtsi for dra7-evm
Tom Rini
- [U-Boot] ARM: davinci: Remove CONFIG_SOC_DA830
Tom Rini
- [U-Boot] spl: Fix compiling warning on gunzip argument
Tom Rini
- [U-Boot] [PATCH] xyz-modem: Fix timeout loop waiting with WATCHDOG
Tom Rini
- [U-Boot] Please pull u-boot-fdt
Tom Rini
- [U-Boot] [U-Boot, v3, 3/9] fat/fs: convert to directory iterators
Tom Rini
- [U-Boot] [PATCH please test] fs/fat: reduce stack usage for SPL
Tom Rini
- [U-Boot] [PATCH] Travis-CI: Checkout only v1.4.3 of dtc
Tom Rini
- [U-Boot] [PATCH] TI: ARCH_OMAP2PLUS: Enable SPL_STACK_R and provide default value
Tom Rini
- [U-Boot] Please pull u-boot-x86
Tom Rini
- [U-Boot] [OE-core] [PATCH] u-boot: Upgrade to 2017.09
Tom Rini
- [U-Boot] [PATCH 1/1] test/py: provide example scripts for integrating qemu
Tom Rini
- [U-Boot] [GIT PULL] u-boot-uniphier/master
Tom Rini
- [U-Boot] Please pull u-boot-rockchip/master
Tom Rini
- [U-Boot] [Patch v2] spl: Fix compiling warning on gunzip argument
Tom Rini
- [U-Boot] [PULL] Please pull u-boot-imx
Tom Rini
- [U-Boot] [U-Boot, v2, 4/8] test/py: Import StringIO from io module for python 3.x
Tom Rini
- [U-Boot] [U-Boot, v2, 4/8] test/py: Import StringIO from io module for python 3.x
Tom Rini
- [U-Boot] [U-Boot, v2, 5/8] test/py: Encode/decode strings for stdio
Tom Rini
- [U-Boot] [PATCHv2] fs/fat: Reduce stack usage
Tom Rini
- [U-Boot] Uboot send pull request
Tom Rini
- [U-Boot] [U-Boot, 1/5] pci: xilinx: Fix doc comments on config space accessors
Tom Rini
- [U-Boot] [U-Boot, 2/5] pci: xilinx: Remove unused field 'hose' from struct xilinx_pcie
Tom Rini
- [U-Boot] [U-Boot, 3/5] pci: tegra: Remove unused field 'hose' from struct tegra_pcie
Tom Rini
- [U-Boot] [U-Boot, 4/5] pci: layerscape: Remove unused field 'hose' from struct ls_pcie
Tom Rini
- [U-Boot] [U-Boot, 5/5] pci: Remove unnecessary 'default n' from Kconfig
Tom Rini
- [U-Boot] [U-Boot, v10, 01/10] mmc: sti_sdhci: Rework sti_mmc_core_config()
Tom Rini
- [U-Boot] [U-Boot, v10, 02/10] ARM: dts: stih410-family: Add missing reset_names for mmc1 node
Tom Rini
- [U-Boot] [U-Boot, v10, 03/10] mmc: sti_sdhci: Use reset framework
Tom Rini
- [U-Boot] [U-Boot,v10,04/10] usb: phy: Add STi USB2 PHY
Tom Rini
- [U-Boot] [U-Boot, v10, 05/10] STiH410-B2260: enable USB Host Networking
Tom Rini
- [U-Boot] [U-Boot, v10, 06/10] STiH410-B2260: enable USB, fastboot, reset, PHY related flags
Tom Rini
- [U-Boot] [U-Boot, v10, 07/10] usb: dwc3: Add dwc3 glue driver support for STi
Tom Rini
- [U-Boot] [U-Boot, v10, 08/10] ARM: dts: STiH410: set DWC3 dual role mode to peripheral
Tom Rini
- [U-Boot] [U-Boot, v10, 09/10] ARM: dts: STiH410: update ehci and ohci compatible
Tom Rini
- [U-Boot] [U-Boot, v10, 10/10] board: STiH410-B2260: add fastboot support
Tom Rini
- [U-Boot] Please pull u-boot-video/next
Tom Rini
- [U-Boot] [U-Boot,V2] test/py: gpt: make use of infra-structure
Tom Rini
- [U-Boot] spl: stash bootstage info before jump to next stage
Tom Rini
- [U-Boot] [U-Boot, v2, 1/9] pinctrl: stm32: add stm32h743-pinctrl compatible
Tom Rini
- [U-Boot] [U-Boot,v2,2/9] serial: stm32x7: add STM32H7 support
Tom Rini
- [U-Boot] [U-Boot, v2, 3/9] dm: clk: add clk driver support for stm32h7 SoCs
Tom Rini
- [U-Boot] [U-Boot,v2,4/9] dm: reset: add stm32 reset driver
Tom Rini
- [U-Boot] [U-Boot,v2,5/9] dm: misc: add stm32 rcc driver
Tom Rini
- [U-Boot] [U-Boot, v2, 6/9] ARM: DTS: stm32: add stm32h743i-disco files
Tom Rini
- [U-Boot] [U-Boot, v2, 7/9] ARM: DTS: stm32: add stm32h743i-eval files
Tom Rini
- [U-Boot] [U-Boot, v2, 8/9] ARM: DTS: stm32: adapt stm32h7 dts files for U-boot
Tom Rini
- [U-Boot] [U-Boot, v2, 9/9] board: Add stm32h7 SoC, discovery and evaluation boards support
Tom Rini
- [U-Boot] [U-Boot, v2] arm: am33xx: Make pin multiplexing functions optional
Tom Rini
- [U-Boot] [U-Boot, v2] spl: Fix compiling warning on gunzip argument
Tom Rini
- [U-Boot] Makefile: Update minimum dtc version to 1.4.3
Tom Rini
- [U-Boot] [U-Boot, v2] net/tftp: fix build if CMD_BOOTEFI is not set
Tom Rini
- [U-Boot] Travis-CI: Checkout only v1.4.3 of dtc
Tom Rini
- [U-Boot] [PATCHv2] fs/fat: Reduce stack usage
Tom Rini
- [U-Boot] Makefile: Update minimum dtc version to 1.4.3
Tom Rini
- [U-Boot] Makefile: Update minimum dtc version to 1.4.3
Tom Rini
- [U-Boot] [PULL] u-boot-usb/master
Tom Rini
- [U-Boot] Makefile: Update minimum dtc version to 1.4.3
Tom Rini
- [U-Boot] Makefile: Update minimum dtc version to 1.4.3
Tom Rini
- [U-Boot] [PULL] u-boot-usb/master
Tom Rini
- [U-Boot] FAT filesystems and mtools-created filesystems
Tom Rini
- [U-Boot] Makefile: Update minimum dtc version to 1.4.3
Tom Rini
- [U-Boot] Makefile: Update minimum dtc version to 1.4.3
Tom Rini
- [U-Boot] Makefile: Update minimum dtc version to 1.4.3
Tom Rini
- [U-Boot] Makefile: Update minimum dtc version to 1.4.3
Tom Rini
- [U-Boot] Makefile: Update minimum dtc version to 1.4.3
Tom Rini
- [U-Boot] [PATCH 0/5] Follow the Linux Kernel in building dtc as needed
Tom Rini
- [U-Boot] [PATCH 1/5] scripts/dtc: Update to upstream version v1.4.3
Tom Rini
- [U-Boot] [PATCH 2/5] scripts/dtc: Update to upstream version v1.4.4
Tom Rini
- [U-Boot] [PATCH 3/5] scripts/dtc: Update to upstream version v1.4.4-50-gfe50bd1ecc1d
Tom Rini
- [U-Boot] [PATCH 4/5] dtc: Switch to building and using our own dtc unless provided
Tom Rini
- [U-Boot] [PATCH 5/5] tools/mkimage: Make the path to the dtc binary that mkimage calls configurable
Tom Rini
- [U-Boot] [PATCH v2 1/5] Revert "omap_hsmmc: update struct hsmmc to accommodate omap3 from DT"
Tom Rini
- [U-Boot] [PATCH v2 2/5] omap: Update the base address of the MMC controllers
Tom Rini
- [U-Boot] [PATCH v2 3/5] mmc: omap_hsmmc: Add support for DMA (ADMA2)
Tom Rini
- [U-Boot] [PATCH v2 4/5] mmc: omap_hsmmc: Enable Auto command (CMD12) enable
Tom Rini
- [U-Boot] [PATCH v2 5/5] mmc: omap_hsmmc: Fix incorrect bit operations for disabling a bit
Tom Rini
- [U-Boot] Please pull u-boot-fsl-qoriq master
Tom Rini
- [U-Boot] [PULL] u-boot-socfpga/master
Tom Rini
- [U-Boot] [PATCH 1/4] arm: am57xx: Fix Linux boot from eMMC
Tom Rini
- [U-Boot] [PATCH 2/4] arm: dra7xx: Fix Linux boot from eMMC
Tom Rini
- [U-Boot] [PATCH 3/4] env: ti: boot: Extract command for eMMC Linux boot
Tom Rini
- [U-Boot] [PATCH 4/4] env: ti: boot: Show boot status information
Tom Rini
- [U-Boot] [PATCH 0/5] Follow the Linux Kernel in building dtc as needed
Tom Rini
- [U-Boot] [PATCH 1/3] fs-test: Add FAT16 support
Tom Rini
- [U-Boot] [PATCH 2/3] fs/fat: Fix pathnames using '..' that lead to the root directory
Tom Rini
- [U-Boot] [PATCH 3/3] fs-test: Add test for a filename using '..' to go back to the root
Tom Rini
- [U-Boot] [PATCH 0/5] Follow the Linux Kernel in building dtc as needed
Tom Rini
- [U-Boot] [PULL] u-boot-usb/master
Tom Rini
- [U-Boot] Pull request: u-boot-spi/master
Tom Rini
- [U-Boot] [GIT PULL] Please pull u-boot-mmc master
Tom Rini
- [U-Boot] [PULL] u-boot-usb/master
Tom Rini
- [U-Boot] [PATCHv2] GPT: fix memory leaks identified by Coverity
Tom Rini
- [U-Boot] [PATCH] fs/fat: Fix 'CACHE: Misaligned operation at range' warnings
Tom Rini
- [U-Boot] [PATCH v2 1/4] fs/ext4: Fix group descriptor checksum calculation
Tom Rini
- [U-Boot] [PATCH v2 2/4] fs-test: Add FAT16 support
Tom Rini
- [U-Boot] [PATCH v2 4/4] fs-test: Add test for a filename using '..' to go back to the root
Tom Rini
- [U-Boot] [PATCH v2 1/4] fs/ext4: Fix group descriptor checksum calculation
Tom Rini
- [U-Boot] [PATCH] test/overlay: Fix various malloc/free leaks
Tom Rini
- [U-Boot] [PATCH] test/dm: Fix string handling issues in the eth test
Tom Rini
- [U-Boot] [PATCH] test/overlay: Fix various malloc/free leaks
Tom Rini
- [U-Boot] [PATCH] cmd/nvedit.c: Update input handling to cover overflow cases
Tom Rini
- [U-Boot] [PATCH] cmd/pxe.c: Rework initrd and bootargs handling slightly
Tom Rini
- [U-Boot] [PATCH] cmd/time.c: Initialize 'repeatable' variable
Tom Rini
- [U-Boot] [PATCH] tools/fit_image.c: Update some return code paths
Tom Rini
- [U-Boot] [PATCH] fs/ext4/ext4fs.c: Free dirnode in error path of ext4fs_ls
Tom Rini
- [U-Boot] Please pull u-boot-marvell/master
Tom Rini
- [U-Boot] Please pull u-boot-cfi-flash/master
Tom Rini
- [U-Boot] [U-Boot, 1/1] GPT: incomplete initialization in allocate_disk_part
Tom Rini
- [U-Boot] [GIT PULL] u-boot-sunxi/master
Tom Rini
- [U-Boot] [PATCH 0/5] REVERT Follow the Linux Kernel in building dtc as needed
Tom Rini
- [U-Boot] [PATCH 0/5] REVERT Follow the Linux Kernel in building dtc as needed
Tom Rini
- [U-Boot] [GIT PULL] u-boot-sunxi/master
Tom Rini
- [U-Boot] [GIT PULL] u-boot-sunxi/master
Tom Rini
- [U-Boot] [U-Boot, 5/5] dm: usb: storage: Fix broken read/write when both EHCD and xHCD are enabled
Tom Rini
- [U-Boot] [U-Boot, 5/5] dm: usb: storage: Fix broken read/write when both EHCD and xHCD are enabled
Tom Rini
- [U-Boot] [PULL] u-boot-usb/master
Tom Rini
- [U-Boot] [U-Boot, 5/5] dm: usb: storage: Fix broken read/write when both EHCD and xHCD are enabled
Tom Rini
- [U-Boot] [PATCH v2 3/8] treewide: replace with error() with pr_err()
Tom Rini
- [U-Boot] [GIT PULL v2] u-boot-sunxi/master
Tom Rini
- [U-Boot] [PATCH v2 3/8] treewide: replace with error() with pr_err()
Tom Rini
- [U-Boot] [GIT PULL v2] u-boot-sunxi/master
Tom Rini
- [U-Boot] [PATCH] sandbox: Add clrbits/setbits macros
Tom Rini
- [U-Boot] [GIT PULL] Please pull u-boot-mmc master (take 2)
Tom Rini
- [U-Boot] Uboot send pull request
Tom Rini
- [U-Boot] [PATCH] usb: dwc3: add UniPhier specific glue layer
Tom Rini
- [U-Boot] defconfigs: Add a config for AM43xx High Security EVM with QSPI Boot support
Tom Rini
- [U-Boot] [PATCH] cmd: Make CMD_LZMA / CMD_UNZIP default y if CMD_BOOTI
Tom Rini
- [U-Boot] TI: ARCH_OMAP2PLUS: Enable SPL_STACK_R and provide default value
Tom Rini
- [U-Boot] [U-Boot, V4, 1/5] arm: dts: da850: Migrate da850-evm DTS files from Linux 4.13-RC5
Tom Rini
- [U-Boot] [U-Boot, V4, 2/5] spi: davinci_spi: Add da830-spi support for DM
Tom Rini
- [U-Boot] [U-Boot, V4, 3/5] arm: da850-evm: Enable DM and device tree support for da850-evm
Tom Rini
- [U-Boot] [U-Boot, V4, 4/5] arm: da850-evm: Enable MTD Parts in SPI Flash
Tom Rini
- [U-Boot] [U-Boot,V4,5/5] ARM: da850-evm: Enable DM_I2C
Tom Rini
- [U-Boot] [U-Boot, 1/3] test/py: Document required tools/packages
Tom Rini
- [U-Boot] [U-Boot, 2/3] test/py: provide more information about test skip reason
Tom Rini
- [U-Boot] [U-Boot, 3/3] test/py: add skip marker for reliance on tools
Tom Rini
- [U-Boot] test/py: fix anchors in HTML status report
Tom Rini
- [U-Boot] [U-Boot, v2, 1/1] kconfiglib: update with 'imply' support
Tom Rini
- [U-Boot] [U-Boot, 1/1] scripts/checkpatch: add missing spelling.txt
Tom Rini
- [U-Boot] [U-Boot, 1/2] arm: dts: am3517_evm: Sync DTS files with Linux 4.13-RC5
Tom Rini
- [U-Boot] [U-Boot, 2/2] ARM: omap3: am3517-evm: Add device tree and DM support
Tom Rini
- [U-Boot] [U-Boot, v2] defconfigs: Add a config for AM335x High Security EVM with UART Boot support
Tom Rini
- [U-Boot] arm: am33xx: security: adds auth support for encrypted images
Tom Rini
- [U-Boot] configs: am43xx_evm: Avoid relocation onto firewall at the end of DRAM
Tom Rini
- [U-Boot] configs: k2g_evm: Make findfdt command populate fdtfile variable
Tom Rini
- [U-Boot] configs: keystone2: env: Fix burn_uboot_spi command
Tom Rini
- [U-Boot] ARM: dts: OMAP5+: Enable all gpios in SPL
Tom Rini
- [U-Boot] ARM: dts: OMAP5+: Enable all gpios in SPL
Tom Rini
- [U-Boot] [U-Boot, 1/1] dm: clk: add missing .priv_auto_alloc_size() for stm32f7
Tom Rini
- [U-Boot] arm: dts: omap3: sync DTS with Linux 4.14-rc1
Tom Rini
- [U-Boot] [U-Boot,1/4] arm: am57xx: Fix Linux boot from eMMC
Tom Rini
- [U-Boot] [U-Boot,2/4] arm: dra7xx: Fix Linux boot from eMMC
Tom Rini
- [U-Boot] [U-Boot, 3/4] env: ti: boot: Extract command for eMMC Linux boot
Tom Rini
- [U-Boot] [U-Boot, 4/4] env: ti: boot: Show boot status information
Tom Rini
- [U-Boot] [PULL] Please pull u-boot-rockchip/master
Tom Rini
- [U-Boot] Please pull u-boot-dm
Tom Rini
- [U-Boot] [PATCH] dm: core: Correct address cast in dev_read_addr_ptr()
Tom Rini
- [U-Boot] [PATCH] dm: core: Correct address cast in dev_read_addr_ptr()
Tom Rini
- [U-Boot] [PATCH v2 1/2] fs/fat: Fix 'CACHE: Misaligned operation at range' warnings
Tom Rini
- [U-Boot] [PATCH v2 2/2] fs/fat: Check malloc return values and fix memory leaks
Tom Rini
- [U-Boot] Starting u-boot in USB otg mode
'Maxime Ripard'
- [U-Boot] Starting u-boot in USB otg mode
'Maxime Ripard'
- [U-Boot] Starting u-boot in USB otg mode
'Maxime Ripard'
- [U-Boot] USB Ethernet with device model
Maxime Ripard
- [U-Boot] Starting u-boot in USB otg mode
Maxime Ripard
- [U-Boot] [PATCH 00/13] sunxi: convert musb to the device model and enable usb_ether
Maxime Ripard
- [U-Boot] [PATCH 01/13] usb: gadget: Move USBNET_DEVADDR option out of g_dnl
Maxime Ripard
- [U-Boot] [PATCH 02/13] usb: gadget: Move USBNET_HOST_ADDR to Kconfig
Maxime Ripard
- [U-Boot] [PATCH 03/13] usb: gadget: Convert USB_ETHER to Kconfig
Maxime Ripard
- [U-Boot] [PATCH 04/13] usb: gadget: usb_ether: Move the interfaces to Kconfig
Maxime Ripard
- [U-Boot] [PATCH 05/13] usb: gadget: Make g_dnl USB settings common
Maxime Ripard
- [U-Boot] [PATCH 06/13] usb: gadget: usb_ether: Move settings to common
Maxime Ripard
- [U-Boot] [PATCH 07/13] sunxi: provide default USB gadget setup
Maxime Ripard
- [U-Boot] [PATCH 08/13] sunxi: imply USB_GADGET
Maxime Ripard
- [U-Boot] [PATCH 09/13] cmd: fastboot: Rework fastboot dependency
Maxime Ripard
- [U-Boot] [PATCH 10/13] musb: sunxi: switch to the device model
Maxime Ripard
- [U-Boot] [PATCH 11/13] sunxi: Register usb_ether
Maxime Ripard
- [U-Boot] [PATCH 12/13] sunxi: Imply USB_ETHER
Maxime Ripard
- [U-Boot] [PATCH 13/13] sunxi: sina33: Sync the device tree with the kernel
Maxime Ripard
- [U-Boot] USB Ethernet with device model
Maxime Ripard
- [U-Boot] [PATCH v2 2/2] sunxi: setup simplefb for Allwinner DE2
Maxime Ripard
- [U-Boot] [PATCH v2 00/14] sunxi: convert musb to the device model and enable usb_ether
Maxime Ripard
- [U-Boot] [PATCH v2 01/14] usb: gadget: Move USBNET_DEVADDR option out of g_dnl
Maxime Ripard
- [U-Boot] [PATCH v2 02/14] usb: gadget: Document USBNET_DEVADDR
Maxime Ripard
- [U-Boot] [PATCH v2 03/14] usb: gadget: Move USBNET_HOST_ADDR to Kconfig
Maxime Ripard
- [U-Boot] [PATCH v2 04/14] usb: gadget: Convert USB_ETHER to Kconfig
Maxime Ripard
- [U-Boot] [PATCH v2 05/14] usb: gadget: usb_ether: Move the interfaces to Kconfig
Maxime Ripard
- [U-Boot] [PATCH v2 06/14] usb: gadget: Make g_dnl USB settings common
Maxime Ripard
- [U-Boot] [PATCH v2 07/14] usb: gadget: usb_ether: Move settings to common
Maxime Ripard
- [U-Boot] [PATCH v2 08/14] sunxi: provide default USB gadget setup
Maxime Ripard
- [U-Boot] [PATCH v2 09/14] sunxi: imply USB_GADGET
Maxime Ripard
- [U-Boot] [PATCH v2 10/14] cmd: fastboot: Rework fastboot dependency
Maxime Ripard
- [U-Boot] [PATCH v2 11/14] musb: sunxi: switch to the device model
Maxime Ripard
- [U-Boot] [PATCH v2 12/14] sunxi: Register usb_ether
Maxime Ripard
- [U-Boot] [PATCH v2 13/14] sunxi: Imply USB_ETHER
Maxime Ripard
- [U-Boot] [PATCH v2 14/14] sunxi: sina33: Sync the device tree with the kernel
Maxime Ripard
- [U-Boot] [PATCH v2 0/3] mmc: sunxi: index hack removal
Maxime Ripard
- [U-Boot] [PATCH v2 1/3] arm: sunxi: Move spl_boot_device in a separate function
Maxime Ripard
- [U-Boot] [PATCH v2 2/3] sunxi: Use sunxi_get_boot_device
Maxime Ripard
- [U-Boot] [PATCH v2 3/3] sunxi: Remove the MMC index hack
Maxime Ripard
- [U-Boot] [PATCH v2 2/2] sunxi: setup simplefb for Allwinner DE2
Maxime Ripard
- [U-Boot] [PATCH v2 00/14] sunxi: convert musb to the device model and enable usb_ether
Maxime Ripard
- [U-Boot] [PATCH v3 1/3] video: sunxi: extract simplefb match code to a new file
Maxime Ripard
- [U-Boot] [PATCH v3 2/3] video: add an option for video simplefb via DT
Maxime Ripard
- [U-Boot] [PATCH v3 3/3] sunxi: setup simplefb for Allwinner DE2
Maxime Ripard
- [U-Boot] [linux-sunxi] Re: [PATCH v3 2/3] video: add an option for video simplefb via DT
Maxime Ripard
- [U-Boot] [PATCH v4 0/3] Allwinner DE2 HDMI SimpleFB support
Maxime Ripard
- [U-Boot] [PATCH v4 2/3] video: add an option for video simplefb via DT
Maxime Ripard
- [U-Boot] [PATCH v4 2/3] video: add an option for video simplefb via DT
Maxime Ripard
- [U-Boot] [RESEND PATCH 5/5] sunxi: video: add LCD support to DE2 driver
Maxime Ripard
- [U-Boot] [RESEND PATCH 3/3] dts: sunxi: add PWM node for sun50i
Maxime Ripard
- [U-Boot] [RESEND PATCH 5/5] sunxi: video: add LCD support to DE2 driver
Maxime Ripard
- [U-Boot] [PATCH v2 3/3] dts: sunxi: add PWM node for sun50i
Maxime Ripard
- [U-Boot] [PATCH v5 3/4] video: add an option for video simplefb via DT
Maxime Ripard
- [U-Boot] [PATCH v5 1/4] sunxi: change the DE1 video option to CONFIG_VIDEO_SUNXI
Maxime Ripard
- [U-Boot] [PATCH v5 1/4] sunxi: change the DE1 video option to CONFIG_VIDEO_SUNXI
Maxime Ripard
- [U-Boot] [PATCH v2 1/1] sunxi: Add support for A20-OLinuXino-MICRO-eMMC
Maxime Ripard
- [U-Boot] [PATCH v2 0/3] mmc: sunxi: index hack removal
Maxime Ripard
- [U-Boot] [PATCH] sun50i: h5: Add NanoPi Neo Plus2 DT initial support
Maxime Ripard
- [U-Boot] [PATCH v2 09/14] sunxi: imply USB_GADGET
Maxime Ripard
- [U-Boot] [PATCH 1/9] sunxi: rename Bananapi M3 dts file name
Maxime Ripard
- [U-Boot] [PATCH 2/9] sunxi: Enable eMMC on Cubietruck Plus
Maxime Ripard
- [U-Boot] [PATCH 3/9] sunxi: Fix USB PHY control register offset for A83T
Maxime Ripard
- [U-Boot] [PATCH 4/9] sunxi: Switch MUSB to gadget mode on the Bananapi M3
Maxime Ripard
- [U-Boot] [PATCH 6/9] net: sun8i_emac: Support RX/TX delay chains
Maxime Ripard
- [U-Boot] [PATCH 7/9] net: sun8i_emac: Fix build for non-H3/H5 SoCs
Maxime Ripard
- [U-Boot] [linux-sunxi] Re: [PATCH v5 1/4] sunxi: change the DE1 video option to CONFIG_VIDEO_SUNXI
Maxime Ripard
- [U-Boot] [PATCH 4/9] sunxi: Switch MUSB to gadget mode on the Bananapi M3
Maxime Ripard
- [U-Boot] [RESEND PATCH 5/5] sunxi: video: add LCD support to DE2 driver
Maxime Ripard
- [U-Boot] [PATCH v2] sun50i: h5: Add NanoPi Neo Plus2 DT initial support
Maxime Ripard
- [U-Boot] [PATCH] SPL: SPI: sunxi: add SPL FIT image support
Maxime Ripard
- [U-Boot] [PATCH v3] sun50i: h5: Add NanoPi Neo Plus2 DT initial support
Maxime Ripard
- [U-Boot] [PATCH] sunxi: clk: fix N formula for CPUX clocks
Maxime Ripard
- [U-Boot] [GIT PULL] u-boot-sunxi/master
Maxime Ripard
- [U-Boot] [PATCH 1/1] sunxi: Fix A20-OLinuXino-MICRO dts for LAN8710
Maxime Ripard
- [U-Boot] [GIT PULL] u-boot-sunxi/master
Maxime Ripard
- [U-Boot] [GIT PULL] u-boot-sunxi/master
Maxime Ripard
- [U-Boot] [GIT PULL v2] u-boot-sunxi/master
Maxime Ripard
- [U-Boot] [PATCH 1/1] sunxi: Fix A20-OLinuXino-MICRO dts for LAN8710
Maxime Ripard
- [U-Boot] [GIT PULL v2] u-boot-sunxi/master
Maxime Ripard
- [U-Boot] [PATCH] Revert "sunxi: imply USB_GADGET"
Maxime Ripard
- [U-Boot] [ANN] U-Boot v2017.09-rc4 released
Peter Robinson
- [U-Boot] [ANN] U-Boot v2017.09-rc4 released
Peter Robinson
- [U-Boot] [ANN] U-Boot v2017.09-rc4 released
Peter Robinson
- [U-Boot] [PATCH] env: Fix out of tree building of tools-all
Peter Robinson
- [U-Boot] [PATCH v4 0/3] Allwinner DE2 HDMI SimpleFB support
Peter Robinson
- [U-Boot] Issues with mx6 (cubox/wandboard) with 2017.09
Peter Robinson
- [U-Boot] Issues with mx6 (cubox/wandboard) with 2017.09
Peter Robinson
- [U-Boot] [PATCH v2 5/6] ARM: Add a new arch + board for QEMU's 'virt' machine
Peter Robinson
- [U-Boot] [PATCH] mvebu: turris_omnia: Only set eth?addr env if CONFIG_CMD_NET
Stefan Roese
- [U-Boot] [next PATCH v2 1/2] ARM: mvebu: Add SoC IDs for Marvell's integrated CPUs
Stefan Roese
- [U-Boot] [next PATCH v2 2/2] ARM: mvebu: add additional information to board_add_ram_info()
Stefan Roese
- [U-Boot] [PATCH 1/5] dm: usb: Add a new USB controller operation 'get_max_xfer_size'
Stefan Roese
- [U-Boot] [PATCH 2/5] dm: usb: xhci: Implement get_max_xfer_size() operation
Stefan Roese
- [U-Boot] [PATCH 3/5] dm: usb: ehci: Implement get_max_xfer_size() operation
Stefan Roese
- [U-Boot] [PATCH 4/5] usb: storage: Refactor to use max_xfer_blk from struct us_data
Stefan Roese
- [U-Boot] [PATCH 5/5] dm: usb: storage: Fix broken read/write when both EHCD and xHCD are enabled
Stefan Roese
- [U-Boot] [PATCH 00/14] usb: xhci: Add interrupt transfer support and full speed device support
Stefan Roese
- [U-Boot] [PATCH 00/14] usb: xhci: Add interrupt transfer support and full speed device support
Stefan Roese
- [U-Boot] [PATCH 1/2] arm: mvebu: fix boot from UART on ClearFog Base
Stefan Roese
- [U-Boot] [PATCH 1/2] arm: mvebu: fix boot from UART on ClearFog Base
Stefan Roese
- [U-Boot] [PATCH] mvebu: turris_omnia: Only set eth?addr env if CONFIG_CMD_NET
Stefan Roese
- [U-Boot] [PATCH v2] cmd: usb: add blk devices to ignore list in tree graph
Stefan Roese
- [U-Boot] [PATCH 00/14] usb: xhci: Add interrupt transfer support and full speed device support
Stefan Roese
- [U-Boot] DDR training code for Armada 38x
Stefan Roese
- [U-Boot] [PATCH 1/1] GPT: incomplete initialization in allocate_disk_part
Stefan Roese
- [U-Boot] [PATCH 01/14] dm: usb: Fix broken usb_stop()
Stefan Roese
- [U-Boot] [PATCH 02/14] dm: usb: Remove no longer needed blk_unbind_all()
Stefan Roese
- [U-Boot] [PATCH 03/14] usb: xhci: Don't assume LS/FS devices are always behind a HS hub
Stefan Roese
- [U-Boot] [PATCH 04/14] usb: Handle audio extension endpoint descriptor in usb_parse_config()
Stefan Roese
- [U-Boot] [PATCH 05/14] usb: xhci: Add interrupt transfer support
Stefan Roese
- [U-Boot] [PATCH 06/14] usb: Only get 64 bytes device descriptor for full speed devices
Stefan Roese
- [U-Boot] [PATCH 07/14] usb: Read device descriptor after device is addressed for xHCI
Stefan Roese
- [U-Boot] [PATCH 08/14] usb: xhci: Fix max packet size for full speed device endpoint 0
Stefan Roese
- [U-Boot] [PATCH 09/14] usb: hub: Clear port reset before usb_hub_port_connect_change()
Stefan Roese
- [U-Boot] [PATCH 10/14] usb: hub: Clear BH reset status change for a 3.0 hub
Stefan Roese
- [U-Boot] [PATCH 11/14] usb: xhci: Honor endpoint's interval
Stefan Roese
- [U-Boot] [PATCH 12/14] usb: xhci: Program max burst size for endpoint
Stefan Roese
- [U-Boot] [PATCH 13/14] usb: xhci: Set 'Error Count' to 0 for isoch endpoints
Stefan Roese
- [U-Boot] [PATCH 14/14] usb: xhci: Set 'Average TRB Length' to 8 for control endpoints
Stefan Roese
- [U-Boot] [PATCH 1/1] GPT: incomplete initialization in allocate_disk_part
Stefan Roese
- [U-Boot] Armada 38x clearfog pci trouble
Stefan Roese
- [U-Boot] Armada 38x clearfog pci trouble
Stefan Roese
- [U-Boot] Armada 38x clearfog pci trouble
Stefan Roese
- [U-Boot] [PATCH] ARM: mvebu: add SAR frequency values for 1.8/2.0GHz
Stefan Roese
- [U-Boot] DDR training code for Armada 38x
Stefan Roese
- [U-Boot] [PATCH v2 1/2] arm: mvebu: fix boot from UART on ClearFog Base
Stefan Roese
- [U-Boot] [PATCH v2 2/2] arm: mvebu: clearfog: document boot from UART
Stefan Roese
- [U-Boot] [PATCH] ARM: mvebu: handle unused DRAM banks with ECC enabled
Stefan Roese
- [U-Boot] [PATCH] ARM: mvebu: add SAR frequency values for 1.8/2.0GHz
Stefan Roese
- [U-Boot] [PATCH] arm: mvebu: Remove theadorable_defconfig
Stefan Roese
- [U-Boot] [PATCH] ARM: mvebu: Convert CONFIG_MVNETA to Kconfig
Stefan Roese
- [U-Boot] [next PATCH v2 1/2] ARM: mvebu: Add SoC IDs for Marvell's integrated CPUs
Stefan Roese
- [U-Boot] [next PATCH v2 2/2] ARM: mvebu: add additional information to board_add_ram_info()
Stefan Roese
- [U-Boot] Please pull u-boot-marvell/master
Stefan Roese
- [U-Boot] [PATCH] mtd: cfi: Zap cfi_flash_base in DM case
Stefan Roese
- [U-Boot] [PATCH] mtd: cfi: Add support for status register polling
Stefan Roese
- [U-Boot] Please pull u-boot-cfi-flash/master
Stefan Roese
- [U-Boot] "usb storage" command issues
Stefan Roese
- [U-Boot] [PATCH] x86: theadorable-x86-common: Add further pci hotplug cmdline parameters
Stefan Roese
- [U-Boot] [PATCH] x86: theadorable-x86-xxx_defconfig: Enable setexpr command
Stefan Roese
- [U-Boot] [PATCH] arm: mvebu: theadorable_debug_defconfig: Enable setexpr command
Stefan Roese
- [U-Boot] tegra: fdt: create initial files and changes to support the tegra124 based nyan-kitty chromebase by acer
Benjamin Roszak
- [U-Boot] [PATCH] u-boot: Upgrade to 2017.09
Otavio Salvador
- [U-Boot] [PATCH] u-boot: Upgrade to 2017.09
Otavio Salvador
- [U-Boot] [PATCH] u-boot: Upgrade to 2017.09
Otavio Salvador
- [U-Boot] [OE-core] [PATCH] u-boot: Upgrade to 2017.09
Otavio Salvador
- [U-Boot] [PATCH 1/2] mx25pdk: Use generic filesystem commands
Otavio Salvador
- [U-Boot] [PATCH 2/2] mx25pdk: Remove duplicated define
Otavio Salvador
- [U-Boot] QSPI "sf probe ...", "sf read ..." on Altera SoC FPGA
Hannes Schmelzer
- [U-Boot] Antwort: Re: QSPI "sf probe ...", "sf read ..." on Altera SoC FPGA
Hannes Schmelzer
- [U-Boot] Antwort: Re: QSPI "sf probe ...", "sf read ..." on Altera SoC FPGA
Hannes Schmelzer
- [U-Boot] Antwort: Re: QSPI "sf probe ...", "sf read ..." on Altera SoC FPGA
Hannes Schmelzer
- [U-Boot] Antwort: Re: QSPI "sf probe ...", "sf read ..." on Altera SoC FPGA
Hannes Schmelzer
- [U-Boot] [PATCH v3 1/1] usb: gadget: g_dnl: Sync internal SN variable with env
Heiko Schocher
- [U-Boot] [PATCH v2 15/19] rockchip: i2c: Convert to livetree
Heiko Schocher
- [U-Boot] [PATCH v2] i2c: muxes: pca954x: Add support for GPIO reset line
Heiko Schocher
- [U-Boot] [PATCH] cmd: set filesize variable in ubi read
Heiko Schocher
- [U-Boot] [PATCH v1] cmd: set filesize variable in ubi read
Heiko Schocher
- [U-Boot] u-boot ubifsload & verify uImage
Heiko Schocher
- [U-Boot] [PATCH v2] i2c: muxes: pca954x: Add support for GPIO reset line
Heiko Schocher
- [U-Boot] [PATCH v3] i2c: muxes: pca954x: Add support for GPIO reset line
Heiko Schocher
- [U-Boot] Please pull from u-boot-i2c
Heiko Schocher
- [U-Boot] [PATCH v1] cmd: set filesize variable in ubi read
Heiko Schocher
- [U-Boot] Pull request: u-boot-ubi/master
Heiko Schocher
- [U-Boot] [PATCH v2 1/5] rockchip: i2c: rk3328: support i2c for rk3328 SoC
Heiko Schocher
- [U-Boot] [PATCH 03/23] efi_loader: support 16 protocols per efi_object
Heinrich Schuchardt
- [U-Boot] [PATCH 1/1] scripts/Makefile.lib: remove overridden target $(obj)/helloworld.so:
Heinrich Schuchardt
- [U-Boot] [PATCH 1/1] scripts/Makefile.lib: remove overridden target $(obj)/helloworld.so:
Heinrich Schuchardt
- [U-Boot] [PATCH 1/1] scripts/Makefile.lib: remove overridden target $(obj)/helloworld.so:
Heinrich Schuchardt
- [U-Boot] ** Can't read Driver Desriptor Block **
Heinrich Schuchardt
- [U-Boot] [PATCH 1/1] efi_loader: helloworld.c: remove superfluous include
Heinrich Schuchardt
- [U-Boot] [PATCH v2 2/4] block: ide: Fix block read/write with driver model
Heinrich Schuchardt
- [U-Boot] [PATCH v2 2/4] block: ide: Fix block read/write with driver model
Heinrich Schuchardt
- [U-Boot] [PATCH 0/3] Clean up make process for EFI payload
Heinrich Schuchardt
- [U-Boot] [PATCH 1/3] efi_loader: rename __efi_hello_world_*
Heinrich Schuchardt
- [U-Boot] [PATCH 2/3] scripts/Makefile.lib: generalize building built in EFI app
Heinrich Schuchardt
- [U-Boot] [PATCH 3/3] efi_loader: usage of always in Makefile
Heinrich Schuchardt
- [U-Boot] [PATCH v2 0/4] Clean up make process for EFI payload
Heinrich Schuchardt
- [U-Boot] [PATCH v2 1/4] efi_loader: rename __efi_hello_world_*
Heinrich Schuchardt
- [U-Boot] [PATCH v2 2/4] scripts/Makefile.lib: generalize building built in EFI app
Heinrich Schuchardt
- [U-Boot] [PATCH v2 3/4] efi_loader: usage of always in Makefile
Heinrich Schuchardt
- [U-Boot] [PATCH v2 4/4] efi_loader: allow multiple source files for EFI apps
Heinrich Schuchardt
- [U-Boot] [PATCH 0/3] Clean up make process for EFI payload
Heinrich Schuchardt
- [U-Boot] [U-Boot, v2, 4/4] efi_loader: allow multiple source files for EFI apps
Heinrich Schuchardt
- [U-Boot] [PATCH 00/23] efi_loader implement missing functions
Heinrich Schuchardt
- [U-Boot] [PATCH 1/1] efi_loader: move efi_guid_t typedef to efi.h
Heinrich Schuchardt
- [U-Boot] [PATCH 0/5] vsprintf and short-wchar for EFI_LOADER
Heinrich Schuchardt
- [U-Boot] [PATCH 1/1] efi_loader: move efi_guid_t typedef to efi.h
Heinrich Schuchardt
- [U-Boot] [PATCH 1/1] vsprintf: vsprintf does not have parameter size
Heinrich Schuchardt
- [U-Boot] [PATCH 1/1] linker_lists: remove incorrect comment
Heinrich Schuchardt
- [U-Boot] Building qemu-x86_64_defconfig fails: u-boot-spl-nodtb.bin of 4, 293, 642, 704 bytes
Heinrich Schuchardt
- [U-Boot] Building qemu-x86_64_defconfig fails: u-boot-spl-nodtb.bin of 4, 293, 642, 704 bytes
Heinrich Schuchardt
- [U-Boot] Building qemu-x86_64_defconfig fails: u-boot-spl-nodtb.bin of 4, 293, 642, 704 bytes
Heinrich Schuchardt
- [U-Boot] Building qemu-x86_64_defconfig fails: u-boot-spl-nodtb.bin of 4, 293, 642, 704 bytes
Heinrich Schuchardt
- [U-Boot] [PATCH 1/1] spl: u-boot-spl-nodtb.bin: remove .got and .got.plt sections
Heinrich Schuchardt
- [U-Boot] [PATCH v2 01/21] part: move efi_guid_t
Heinrich Schuchardt
- [U-Boot] [PATCH 1/1] spl: u-boot-spl-nodtb.bin: remove .got and .got.plt sections
Heinrich Schuchardt
- [U-Boot] [PATCH 1/1] x86: ivybridge: remove unused variables
Heinrich Schuchardt
- [U-Boot] [PATCH v2 1/1] checkpatch: update from Linux v4.13-rc6
Heinrich Schuchardt
- [U-Boot] [RFC 1/1] efi_loader: fix building of helloworld.efi on x86_64
Heinrich Schuchardt
- [U-Boot] [PATCH 1/1] checkpatch.pl: Add warning for new __packed additions
Heinrich Schuchardt
- [U-Boot] [RFC 1/1] efi_loader: fix building of helloworld.efi on x86_64
Heinrich Schuchardt
- [U-Boot] [U-Boot, v2, 3/5] spl: fit: Eanble GZIP support for image decompression
Heinrich Schuchardt
- [U-Boot] [U-Boot, v2, 3/5] spl: fit: Eanble GZIP support for image decompression
Heinrich Schuchardt
- [U-Boot] [PATCH 1/1] test/py: u_boot_console_base.py: fix typo
Heinrich Schuchardt
- [U-Boot] [U-Boot, v2, 3/5] spl: fit: Eanble GZIP support for image decompression
Heinrich Schuchardt
- [U-Boot] efi_loader: fix events
Heinrich Schuchardt
- [U-Boot] efi_loader: queued patches
Heinrich Schuchardt
- [U-Boot] [PATCH 16/23] efi_loader: implement DisconnectController
Heinrich Schuchardt
- [U-Boot] [PATCH 15/23] efi_loader: implement ConnectController
Heinrich Schuchardt
- [U-Boot] [PATCH 1/1] efi_loader: provide comment for protocol GUIDs
Heinrich Schuchardt
- [U-Boot] [PATCH 00/10] efi_loader: event services & API test
Heinrich Schuchardt
- [U-Boot] [PATCH 01/10] efi_loader: allow return value in EFI_CALL
Heinrich Schuchardt
- [U-Boot] [PATCH 02/10] efi_selftest: provide an EFI selftest application
Heinrich Schuchardt
- [U-Boot] [PATCH 03/10] test/py: add a test calling the EFI selftest
Heinrich Schuchardt
- [U-Boot] [PATCH 04/10] efi_loader: implement queueing of the notification function
Heinrich Schuchardt
- [U-Boot] [PATCH 05/10] efi_loader: efi_set_timer: reset signaled state
Heinrich Schuchardt
- [U-Boot] [PATCH 06/10] efi_selftest: provide unit test for event services
Heinrich Schuchardt
- [U-Boot] [PATCH 07/10] efi_loader: implement task priority level (TPL)
Heinrich Schuchardt
- [U-Boot] [PATCH 08/10] efi_selftest: test task priority levels
Heinrich Schuchardt
- [U-Boot] [PATCH 09/10] efi_loader: notify when ExitBootServices is invoked
Heinrich Schuchardt
- [U-Boot] [PATCH 10/10] efi_selftest: check notification of ExitBootServices
Heinrich Schuchardt
- [U-Boot] [U-Boot,v3,01/21] part: move efi_guid_t
Heinrich Schuchardt
- [U-Boot] [U-Boot,v3,01/21] part: move efi_guid_t
Heinrich Schuchardt
- [U-Boot] [U-Boot,v3,03/21] efi: add some missing __packed
Heinrich Schuchardt
- [U-Boot] [PATCH] efi_loader: fix TEST_PROTOCOL case in OpenProtocol()
Heinrich Schuchardt
- [U-Boot] [PATCH 1/1] x86: provide CONFIG_BUILD_ROM
Heinrich Schuchardt
- [U-Boot] [PATCH 1/1] test/py: provide example scripts for integrating qemu
Heinrich Schuchardt
- [U-Boot] [PATCH 00/10] efi_loader: event services & API test
Heinrich Schuchardt
- [U-Boot] [PATCH 00/16] efi: Enable basic sandbox support for EFI loader
Heinrich Schuchardt
- [U-Boot] [PATCH 01/16] efi: Update efi_smbios_register() to return error code
Heinrich Schuchardt
- [U-Boot] [PATCH 02/16] efi: Move the init check inside efi_init_obj_list()
Heinrich Schuchardt
- [U-Boot] [PATCH 03/16] efi: Add error checking for efi_init_obj_list()
Heinrich Schuchardt
- [U-Boot] [PATCH 04/16] efi: Add a TODO to efi_init_obj_list()
Heinrich Schuchardt
- [U-Boot] [PATCH 05/16] efi: Correct header order in efi_memory
Heinrich Schuchardt
- [U-Boot] [PATCH 1/1] efi_loader: fix typo in include/efi.h
Heinrich Schuchardt
- [U-Boot] [PATCH 08/16] sandbox: Add a setjmp() implementation
Heinrich Schuchardt
- [U-Boot] [PATCH 06/16] efi: sandbox: Adjust memory setup for sandbox
Heinrich Schuchardt
- [U-Boot] [PATCH 1/1] efi_loader: fix bug in efi_add_known_memory
Heinrich Schuchardt
- [U-Boot] [PATCH 16/16] efi: sandbox: Add a simple 'bootefi test' command
Heinrich Schuchardt
- [U-Boot] [PATCH 13/16] efi: sandbox: Add relocation constants
Heinrich Schuchardt
- [U-Boot] [PATCH 1/1] test/py: provide example scripts for integrating qemu
Heinrich Schuchardt
- [U-Boot] [PATCH 1/1] test/py: provide example scripts for integrating qemu
Heinrich Schuchardt
- [U-Boot] [PATCH 1/1] efi_loader: avoid obscure constants in efi_runtime.c
Heinrich Schuchardt
- [U-Boot] [PATCH v2 1/1] test/py: provide example scripts for integrating qemu
Heinrich Schuchardt
- [U-Boot] [PATCH 1/1] test/py: provide example scripts for integrating qemu
Heinrich Schuchardt
- [U-Boot] [PATCH 1/1] x86: provide CONFIG_BUILD_ROM
Heinrich Schuchardt
- [U-Boot] [PATCH 1/1] scripts/checkpatch: add missing spelling.txt
Heinrich Schuchardt
- [U-Boot] [PATCH v2 1/1] x86: provide CONFIG_BUILD_ROM
Heinrich Schuchardt
- [U-Boot] [PATCH v3 1/1] test/py: provide example scripts for integrating qemu
Heinrich Schuchardt
- [U-Boot] [PATCH 1/1] test/py: provide example scripts for integrating qemu
Heinrich Schuchardt
- [U-Boot] [PATCH v3 1/1] test/py: provide example scripts for integrating qemu
Heinrich Schuchardt
- [U-Boot] cmd/bootefi.c:285:3: error: ‘loaded_image_info’ undeclared
Heinrich Schuchardt
- [U-Boot] [PATCH 1/1] efi_selftest: enable CONFIG_CMD_BOOTEFI_SELFTEST
Heinrich Schuchardt
- [U-Boot] [PATCH 1/1] efi_loader: reenable selftest
Heinrich Schuchardt
- [U-Boot] [PATCH 00/13] log: Add a new logging feature
Heinrich Schuchardt
- [U-Boot] [PATCH v2 1/1] efi_loader: reenable selftest
Heinrich Schuchardt
- [U-Boot] [PATCH 1/1] GPT: incomplete initialization in allocate_disk_part
Heinrich Schuchardt
- [U-Boot] [PATCH 1/1] sandbox: avoid memory leak in os_dirent_ls
Heinrich Schuchardt
- [U-Boot] drivers/core/read.c:64:44: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast]
Heinrich Schuchardt
- [U-Boot] [PATCH 1/1] efi_loader: provide function comments for boot services
Heinrich Schuchardt
- [U-Boot] efi-next: next patches to merge
Heinrich Schuchardt
- [U-Boot] [PATCH 1/1] efi_loader: call EFI_EXIT in efi_copy_mem, efi_set_mem
Heinrich Schuchardt
- [U-Boot] [PATCH 1/1] GPT: incomplete initialization in allocate_disk_part
Heinrich Schuchardt
- [U-Boot] Makefile: Update minimum dtc version to 1.4.3
Heinrich Schuchardt
- [U-Boot] [PATCH 1/1] Makefile: indicate dtc source location
Heinrich Schuchardt
- [U-Boot] [PATCH 1/1] efi_loader: fix bug in efi_add_known_memory
Heinrich Schuchardt
- [U-Boot] [PATCH 00/17] efi_loader: Simple Network Protocol
Heinrich Schuchardt
- [U-Boot] [PATCH 01/17] efi_loader: call EFI_EXIT in efi_copy_mem, efi_set_mem
Heinrich Schuchardt
- [U-Boot] [PATCH 02/17] efi_loader: parameters of CopyMem and SetMem
Heinrich Schuchardt
- [U-Boot] [PATCH 03/17] efi_loader: pass GUIDs as const efi_guid_t *
Heinrich Schuchardt
- [U-Boot] [PATCH 04/17] efi_loader: wrong type in wait_for_event
Heinrich Schuchardt
- [U-Boot] [PATCH 05/17] efi_loader: incorrect definition of EFI_SIMPLE_NETWORK_PROTOCOL
Heinrich Schuchardt
- [U-Boot] [PATCH 06/17] efi_loader: correct bits of receive_filters bit mask
Heinrich Schuchardt
- [U-Boot] [PATCH 07/17] efi_loader: fill simple network protocol revision
Heinrich Schuchardt
- [U-Boot] [PATCH 08/17] efi_loader: efi_net: hwaddr_size = 6
Heinrich Schuchardt
- [U-Boot] [PATCH 09/17] efi_net: return EFI_UNSUPPORTED where appropriate
Heinrich Schuchardt
- [U-Boot] [PATCH 10/17] efi_loader: use events for efi_net_receive
Heinrich Schuchardt
- [U-Boot] [PATCH 11/17] efi_loader: implement WaitForPacket event
Heinrich Schuchardt
- [U-Boot] [PATCH 12/17] efi_loader: fix efi_net_get_status
Heinrich Schuchardt
- [U-Boot] [PATCH 13/17] efi_loader: size fields in SimpleNetworkProtocol
Heinrich Schuchardt
- [U-Boot] [PATCH 14/17] efi_loader: fill return values in SimpleNetworkProtocol
Heinrich Schuchardt
- [U-Boot] [PATCH 15/17] efi_selftest: correct definition of efi_st_error
Heinrich Schuchardt
- [U-Boot] [PATCH 16/17] efi_selftest: allow printing MAC addresses
Heinrich Schuchardt
- [U-Boot] [PATCH 17/17] efi_loader: supply EFI network test
Heinrich Schuchardt
- [U-Boot] [PATCH 1/1] efi_loader: provide function comments for boot services
Heinrich Schuchardt
- [U-Boot] [PATCH 10/10] efi_selftest: check notification of ExitBootServices
Heinrich Schuchardt
- [U-Boot] [PATCH 04/10] efi_loader: implement queueing of the notification function
Heinrich Schuchardt
- [U-Boot] [PATCH 08/10] efi_selftest: test task priority levels
Heinrich Schuchardt
- [U-Boot] [PATCH 1/1] evb-rk3399: avoid redefinition of CONFIG_ENV_OFFSET
Heinrich Schuchardt
- [U-Boot] [PATCH 1/1] rockchip: rk3399: spl: implicit declaration back_to_bootrom
Heinrich Schuchardt
- [U-Boot] [PATCH 1/1] rockchip: rk3399: spl: implicit declaration back_to_bootrom
Heinrich Schuchardt
- [U-Boot] [PATCH 1/1] rockchip: provide installation instruction for Firefly-RK3399.
Heinrich Schuchardt
- [U-Boot] [PATCH] sunxi: clk: fix N formula for CPUX clocks
Quentin Schulz
- [U-Boot] [PATCH v2 01/13] Provide a generic io.h & address mapping functions
Daniel Schwierzeck
- [U-Boot] [PATCH v2 10/13] mips: Use asm-generic/io.h
Daniel Schwierzeck
- [U-Boot] [PATCH] boston: Drop unused return value
Daniel Schwierzeck
- [U-Boot] [PATCH] boston: Remove unused label in lowlevel_display
Daniel Schwierzeck
- [U-Boot] [PATCH] MIPS: Drop unused PTR_COUNT_SHIFT from u-boot.lds
Daniel Schwierzeck
- [U-Boot] [PATCH] ARM: mvebu: handle unused DRAM banks with ECC enabled
Joshua Scott
- [U-Boot] [PATCH 01/14] arm: socfpga: stratix10: Add base address map for Statix10 SoC
See, Chin Liang
- [U-Boot] [PATCH 06/14] arm: socfpga: stratix10: Add misc support for Stratix10 SoC
See, Chin Liang
- [U-Boot] [PATCH 04/14] arm: socfpga: stratix10: Add Reset Manager driver for Stratix10 SoC
See, Chin Liang
- [U-Boot] [PATCH 03/14] arm: socfpga: stratix10: Add Clock Manager driver for Stratix10 SoC
See, Chin Liang
- [U-Boot] [PATCH 02/14] arm: dts: Add dts for Stratix10 SoC
See, Chin Liang
- [U-Boot] [PATCH 02/14] arm: dts: Add dts for Stratix10 SoC
See, Chin Liang
- [U-Boot] tftp reliability
Ran Shalit
- [U-Boot] tftp reliability
Ran Shalit
- [U-Boot] [PATCH v1 1/6] serial: stm32x7: cleanup code
Bo Shen
- [U-Boot] [PATCH v1 3/6] serial: stm32x7: prepare the ground to STM32F4 support
Bo Shen
- [U-Boot] [PATCH v1 5/6] serial: stm32x7: add STM32F4 support
Bo Shen
- [U-Boot] [PATCH v1 5/6] serial: stm32x7: add STM32F4 support
Bo Shen
- [U-Boot] [PATCH 0/3] Clean up make process for EFI payload
Andy Shevchenko
- [U-Boot] [PATCH 1/2] arm: mvebu: fix boot from UART on ClearFog Base
Baruch Siach
- [U-Boot] [PATCH 1/2] arm: mvebu: fix boot from UART on ClearFog Base
Baruch Siach
- [U-Boot] [PATCH v2 1/2] arm: mvebu: fix boot from UART on ClearFog Base
Baruch Siach
- [U-Boot] [PATCH v2 2/2] arm: mvebu: clearfog: document boot from UART
Baruch Siach
- [U-Boot] [linux-sunxi] [PATCH v3 1/3] video: sunxi: extract simplefb match code to a new file
Siarhei Siamashka
- [U-Boot] [PATCH] py: test_gpio: Add support for GPIO pytest
Michal Simek
- [U-Boot] [PATCH] py: test_gpio: Add support for GPIO pytest
Michal Simek
- [U-Boot] [PATCH] py: test_gpio: Add support for GPIO pytest
Michal Simek
- [U-Boot] [PATCH 00/15] spl: atf: update booting images via ATF to use info from FIT images
Michal Simek
- [U-Boot] [PATCH] ARM: zynq: Add support for SYZYGY Hub board
Michal Simek
- [U-Boot] Antwort: Re: QSPI "sf probe ...", "sf read ..." on Altera SoC FPGA
Goldschmidt Simon
- [U-Boot] Antwort: Re: QSPI "sf probe ...", "sf read ..." on Altera SoC FPGA
Goldschmidt Simon
- [U-Boot] Debugging SPL
Goldschmidt Simon
- [U-Boot] Antwort: Re: QSPI "sf probe ...", "sf read ..." on Altera SoC FPGA
Goldschmidt Simon
- [U-Boot] [PATCH 001/080] mpc8308rdb: Fix style violation
Mario Six
- [U-Boot] [PATCH 002/080] mpc83xx: spd_sdram: Fix whitespace style violations
Mario Six
- [U-Boot] [PATCH 003/080] mpc83xx: spd_sdram: Fix style violations
Mario Six
- [U-Boot] [PATCH 004/080] include: dm: Fix 'devioe'/'devuce' typos
Mario Six
- [U-Boot] [PATCH 005/080] lib: fdtdec: Fix whitespace style violations
Mario Six
- [U-Boot] [PATCH 006/080] lib: fdtdec: Fix some style violations
Mario Six
- [U-Boot] [PATCH 007/080] core: ofnode: Fix style violations
Mario Six
- [U-Boot] [PATCH 008/080] core: read: Fix style violations
Mario Six
- [U-Boot] [PATCH 009/080] core: Add {ofnode, dev}_translate_address functions
Mario Six
- [U-Boot] [PATCH 010/080] core: Make device_is_compatible live-tree compatible
Mario Six
- [U-Boot] [PATCH 011/080] clk: clk-uclass: Fix style violations
Mario Six
- [U-Boot] [PATCH 012/080] clk: clk_fixed_rate: Fix style violation
Mario Six
- [U-Boot] [PATCH 013/080] clk: Remove superfluous gd declarations
Mario Six
- [U-Boot] [PATCH 014/080] spi: Fix style violation and improve code
Mario Six
- [U-Boot] [PATCH 015/080] spi: Remove obsolete spi_base_setup_slave_fdt
Mario Six
- [U-Boot] [PATCH 016/080] spi: Remove spi_flash_probe_fdt
Mario Six
- [U-Boot] [PATCH 017/080] spi: Remove spi_setup_slave_fdt
Mario Six
- [U-Boot] [PATCH 018/080] spi: Remove CONFIG_OF_SPI_FLASH
Mario Six
- [U-Boot] [PATCH 019/080] spi: sf_probe: Fix style violations
Mario Six
- [U-Boot] [PATCH 020/080] spi: spi-uclass: Fix style violations
Mario Six
- [U-Boot] [PATCH 021/080] sf_probe: Merge spi_flash_probe_tail into spi_flash_probe
Mario Six
- [U-Boot] [PATCH 022/080] net: tsec: Fix style violations
Mario Six
- [U-Boot] [PATCH 023/080] net: tsec: Fix memory leak in error path
Mario Six
- [U-Boot] [PATCH 024/080] net: tsec: Make live-tree compatible
Mario Six
- [U-Boot] [PATCH 025/080] i2c: fsl_i2c: Fix style violations
Mario Six
- [U-Boot] [PATCH 026/080] i2c: fsl_i2c: Remove inline declarations
Mario Six
- [U-Boot] [PATCH 027/080] i2c: fsl_i2c: Make live-tree compatible
Mario Six
- [U-Boot] [PATCH 028/080] gpio: pca953x_gpio: Fix style violations
Mario Six
- [U-Boot] [PATCH 029/080] gpio: pca953x_gpio: Make live-tree compatible
Mario Six
- [U-Boot] [PATCH 030/080] serial: ns16550: Fix style violation
Mario Six
- [U-Boot] [PATCH 031/080] serial: ns16550: Fix address translation
Mario Six
- [U-Boot] [PATCH 032/080] gdsys: Post ppc4xx removal cleanup
Mario Six
- [U-Boot] [PATCH 033/080] net: phy: marvell: Fix style violations
Mario Six
- [U-Boot] [PATCH 034/080] net: phy: marvell 88e151x: Fix handling of bare RGMII interface type
Mario Six
- [U-Boot] [PATCH 035/080] cfi_flash: Fix space between function name and parenthesis
Mario Six
- [U-Boot] [PATCH 036/080] cfi_flash: Fix style of pointer declarations
Mario Six
- [U-Boot] [PATCH 037/080] cfi_flash: Fix Parenthesis spacing
Mario Six
- [U-Boot] [PATCH 038/080] cfi_flash: Fix whitespace with casting
Mario Six
- [U-Boot] [PATCH 039/080] cfi_flash: Fix indent of case statements
Mario Six
- [U-Boot] [PATCH 040/080] cfi_flash: Fix spacing around casts/operators
Mario Six
- [U-Boot] [PATCH 041/080] cfi_flash: Fix missing/superfluous lines
Mario Six
- [U-Boot] [PATCH 042/080] cfi_flash: Remove braces for single-statement blocks
Mario Six
- [U-Boot] [PATCH 043/080] cfi_flash: Fix logical continuations
Mario Six
- [U-Boot] [PATCH 044/080] cfi_flash: Use __func__ macro instead of function name
Mario Six
- [U-Boot] [PATCH 045/080] cfi_flash: Fix comment style
Mario Six
- [U-Boot] [PATCH 046/080] cfi_flash: Remove unnecessary braces
Mario Six
- [U-Boot] [PATCH 047/080] cfi_flash: Add missing braces in blocks
Mario Six
- [U-Boot] [PATCH 048/080] cfi_flash: Fix spelling of "Unknown"
Mario Six
- [U-Boot] [PATCH 049/080] cfi_flash: Fix else after break
Mario Six
- [U-Boot] [PATCH 050/080] cfi_flash: Fix placement of brace
Mario Six
- [U-Boot] [PATCH 051/080] cfi_flash: Remove return from void function
Mario Six
- [U-Boot] [PATCH 052/080] cfi_flash: Reduce the scope of some variables
Mario Six
- [U-Boot] [PATCH 053/080] cfi_flash: Remove assignments from if conditions
Mario Six
- [U-Boot] [PATCH 054/080] cfi_flash: Use u8 pointers instead of void pointers
Mario Six
- [U-Boot] [PATCH 055/080] cfi_flash: Fix strings split across lines
Mario Six
- [U-Boot] [PATCH 056/080] cfi_flash: Rename camel-case variables
Mario Six
- [U-Boot] [PATCH 057/080] flash: Fix spelling of "ERR_TIMOUT"
Mario Six
- [U-Boot] [PATCH 058/080] cfi_flash: Bound-check index before array access
Mario Six
- [U-Boot] [PATCH 059/080] cfi_flash: Fix long lines
Mario Six
- [U-Boot] [PATCH 060/080] cfi_flash: Fix indention
Mario Six
- [U-Boot] [PATCH 061/080] cfi_flash: Always define cfi_flash_num_flash_banks
Mario Six
- [U-Boot] [PATCH 062/080] mtd: cfi_flash: Make live-tree compatible
Mario Six
- [U-Boot] [PATCH 063/080] gpio: mpc85xx_gpio: Fix style violations
Mario Six
- [U-Boot] [PATCH 064/080] gpio: mpc85xx: Rename driver file to mpc8xxx
Mario Six
- [U-Boot] [PATCH 065/080] gpio: mpc8xxx: Rename Kconfig option, structures, and functions
Mario Six
- [U-Boot] [PATCH 066/080] gpio: mpc8xxx: Make compatible with more SoCs
Mario Six
- [U-Boot] [PATCH 067/080] mpc83xx: Prepare usage of DM gpio driver
Mario Six
- [U-Boot] [PATCH 068/080] gpio: mpc8xxx: Make live-tree compatible
Mario Six
- [U-Boot] [PATCH 069/080] cmd: mdio: Fix style violations
Mario Six
- [U-Boot] [PATCH 070/080] common: board_f: Fix style violations
Mario Six
- [U-Boot] [PATCH 071/080] common: board_r: Fix style violations
Mario Six
- [U-Boot] [PATCH 072/080] gdsys: mpc8308: Fix style violations
Mario Six
- [U-Boot] [PATCH 073/080] gdsys: mpc8308: Use shadow register for output GPIO values
Mario Six
- [U-Boot] [PATCH 074/080] strider, hrcon: Reset CAT phy on CON2 module
Mario Six
- [U-Boot] [PATCH 075/080] gdsys:phy: Adapt fixup_88e1518() to latest Release Notes
Mario Six
- [U-Boot] [PATCH 076/080] phy: Fix style violations
Mario Six
- [U-Boot] [PATCH 077/080] i2c: ihs_i2c: Prepare DM conversion
Mario Six
- [U-Boot] [PATCH 078/080] i2c: ihs_i2c: Make DM compatible
Mario Six
- [U-Boot] [PATCH 079/080] i2c: ihs_i2c: Factor out send_buffer method
Mario Six
- [U-Boot] [PATCH 080/080] clk: Makefile: Sort entries alphabetically
Mario Six
- [U-Boot] [PATCH v2 0/5] rockchip: back-to-bootrom: replace assembly-implementation with C-code
Heiko Stuebner
- [U-Boot] [PATCH 1/3] rockchip: make boot_mode releated codes reused across all platforms
Heiko Stuebner
- [U-Boot] [PATCH v3 0/6] rockchip: back-to-bootrom: replace assembly-implementation with C-code
Heiko Stuebner
- [U-Boot] [PATCH v3 0/6] rockchip: back-to-bootrom: replace assembly-implementation with C-code
Heiko Stuebner
- [U-Boot] u-boot Boot issue about rk3188
Heiko Stuebner
- [U-Boot] rk3188/rock_defconfig sdmmc failures
Heiko Stübner
- [U-Boot] [PATCH v2 13/19] ARM: dts: rockchip: prefer u-boot, dm-pre-reloc rather than u-boot, dm-spl
Heiko Stübner
- [U-Boot] [PATCH v2 0/5] rockchip: back-to-bootrom: replace assembly-implementation with C-code
Heiko Stübner
- [U-Boot] [PATCH v3 0/6] rockchip: back-to-bootrom: replace assembly-implementation with C-code
Heiko Stübner
- [U-Boot] u-boot Boot issue about rk3188
Heiko Stübner
- [U-Boot] u-boot Boot issue about rk3188
Heiko Stübner
- [U-Boot] u-boot Boot issue about rk3188
Heiko Stübner
- [U-Boot] FSL PCIe LTSSM >= PCI_LTSSM_L0 equals link up
York Sun
- [U-Boot] [Patch v2] configs: SECURE_BOOT: Enable CONFIG_CMD_EXT4_WRITE
York Sun
- [U-Boot] [PATCH 1/1] armv8: ls1012a: Memory Map modification of kernel, env
York Sun
- [U-Boot] [Patch v2] configs: SECURE_BOOT: Enable CONFIG_CMD_EXT4_WRITE
York Sun
- [U-Boot] [PATCH v5 2/3] armv8: ls1088ardb: Add support for LS1088ARDB platform
York Sun
- [U-Boot] [PATCH 3/3] armv8: ls1088a: Enable PCIe in defconfigs
York Sun
- [U-Boot] [PATCH] armv8: fsl-layerscape: Fix MC reserved memory calculation
York Sun
- [U-Boot] [PATCH] armv8: fsl-layerscape: Add back L3 flushing for all exception levels
York Sun
- [U-Boot] Please pull u-boot-fsl-qoriq master
York Sun
- [U-Boot] [PATCH v5 1/3] armv8:fsl-layerscape: Consolidate registers space defination for CCI-400 bus
York Sun
- [U-Boot] [Patch v2] QE: Set QE_IRAM_READY after uploading firmware
York Sun
- [U-Boot] [PATCH v3 1/3] SECURE_BOOT: Unify memory map for Layerscape based platforms
York Sun
- [U-Boot] [PATCH v3 2/3] LS2080ARDB: QSPI boot: Secure Boot image validation
York Sun
- [U-Boot] [PATCH v3 3/3] LS2080ARDB: Secure Boot defconfig for QSPI boot.
York Sun
- [U-Boot] [PATCH v3 1/5] tools: pblimage: Fix address calculation
York Sun
- [U-Boot] [PATCH v3 2/5] cmd: spl: Fix compiling warning
York Sun
- [U-Boot] [PATCH v3 3/5] spl: fit: Eanble GZIP support for image decompression
York Sun
- [U-Boot] [PATCH v3 4/5] spl: fit: Support both external and embedded data
York Sun
- [U-Boot] [PATCH v3 5/5] spl: fit: Add booting OS first
York Sun
- [U-Boot] [PATCH] armv8: fsl-lsch3: Make CCN-504 related code conditional
York Sun
- [U-Boot] [PATCH][v2]drivers:net:fsl-mc: Update MC address calculation
York Sun
- [U-Boot] [PATCH] armv8: fsl: Use correct conditional compile for ls1012a
York Sun
- [U-Boot] [PATCH] armv8: fsl-layerscape: Fix final MMU table for QSPI and IFC
York Sun
- [U-Boot] [PATCH v5 1/3] armv8: ls1088a: Add NXP LS1088A SoC support
York Sun
- [U-Boot] [PATCH v5 2/3] armv8: ls1088ardb: Add support for LS1088ARDB platform
York Sun
- [U-Boot] [PATCH v5 3/3] armv8: ls1088aqds: Add support of LS1088AQDS
York Sun
- [U-Boot] [PATCH v3 1/2] armv8: fsl-layerscape: Support to add RGMII for ls1088aqds
York Sun
- [U-Boot] [PATCH v3 2/2] armv8: ls1088aqds: Add support of EC1 and EC2
York Sun
- [U-Boot] [PATCH v5 1/9] armv8: Add scfg_clrsetbits_32(), scfg_clrbits_32()
York Sun
- [U-Boot] [PATCH v5 4/9] armv8: Add workaround for USB erratum A-008997
York Sun
- [U-Boot] [PATCH v5 2/9] armv8: Add workaround for USB erratum A-009008
York Sun
- [U-Boot] [PATCH v5 3/9] armv8: Add workaround for USB erratum A-009798
York Sun
- [U-Boot] [PATCH v5 5/9] armv8: Add workaround for USB erratum A-009007
York Sun
- [U-Boot] [PATCH v5 6/9] armv7: Add workaround for USB erratum A-009008
York Sun
- [U-Boot] [PATCH v5 7/9] armv7: Add workaround for USB erratum A-009798
York Sun
- [U-Boot] [PATCH v5 8/9] armv7: Add workaround for USB erratum A-008997
York Sun
- [U-Boot] [PATCH v5 9/9] armv7: Add workaround for USB erratum A-009007
York Sun
- [U-Boot] [PATCH] armv8: fsl-layerscape: Fix MC reserved memory calculation
York Sun
- [U-Boot] [PATCH 1/3] armv8: ls1088a: fix the MMU table for pcie config space
York Sun
- [U-Boot] [PATCH 2/3] armv8: ls1088a: add PCIe dts node
York Sun
- [U-Boot] [PATCH 3/3] armv8: ls1088a: Enable PCIe in defconfigs
York Sun
- [U-Boot] [PATCH] armv8: fsl-layerscape: Add back L3 flushing for all exception levels
York Sun
- [U-Boot] [U-Boot, v2, 3/5] spl: fit: Eanble GZIP support for image decompression
York Sun
- [U-Boot] [PATCH 04/15] spl: fit: simplify logic for FDT loading for non-OS boots
York Sun
- [U-Boot] [PATCH 04/15] spl: fit: simplify logic for FDT loading for non-OS boots
York Sun
- [U-Boot] [U-Boot, v2, 3/5] spl: fit: Eanble GZIP support for image decompression
York Sun
- [U-Boot] [PATCH 04/15] spl: fit: simplify logic for FDT loading for non-OS boots
York Sun
- [U-Boot] [PATCH v2 0/7] Enable falcon boot for LS1043ARDB
York Sun
- [U-Boot] [PATCH v2 1/7] spl: fix assignment of board info to global data
York Sun
- [U-Boot] [PATCH v2 2/7] cmd: spl: fix compiling error when CONFIG_CMD_SPL_WRITE_SIZE not defined
York Sun
- [U-Boot] [PATCH v2 3/7] armv8: fsl-layerscape: Avoid running dram_init_banksize again
York Sun
- [U-Boot] [PATCH v2 4/7] armv8: ls1043ardb: Use static DDR setting for SPL boot
York Sun
- [U-Boot] [PATCH v2 5/7] armv8: layerscape: Eanble falcon boot
York Sun
- [U-Boot] [PATCH v2 6/7] armv8: ls1043ardb: Enable spl_board_init() function
York Sun
- [U-Boot] [PATCH v2 7/7] armv8: ls1043ardb_sdcard: Enable falcon boot
York Sun
- [U-Boot] [PATCH] spl: Fix compiling warning on gunzip argument
York Sun
- [U-Boot] [PATCH] armv7: ls1021a: Fix marco CONFIG_LS102XA
York Sun
- [U-Boot] [PATCH] config: ls1012aqds: Add USB EHCI support for ls1012aqds
York Sun
- [U-Boot] [PATCH] config: ls1012aqds: Add USB EHCI support for ls1012aqds
York Sun
- [U-Boot] [U-Boot, 08/14] usb: dwc3: Add helper functions to enable snooping and burst settings
York Sun
- [U-Boot] [PATCH] PCI: layerscape: Make the pcie link up status judgement more specific
York Sun
- [U-Boot] [PATCH 1/1] board/ls2081ardb: Update display information during boot
York Sun
- [U-Boot] [PATCH] armv8/ls1088a: configure PMU's PCTBENR to enable WDT
York Sun
- [U-Boot] [PATCH v2 1/2] LS1088A_QSPI: SECURE_BOOT: Images validation
York Sun
- [U-Boot] [PATCH v2 2/2] LS1088A_QSPI: Add secure boot defconfigs for QSPI boot.
York Sun
- [U-Boot] [PATCH] LS2080A_SECURE_BOOT: Enable CONFIG_FSL_LS_PPA.
York Sun
- [U-Boot] [PATCH 1/3] armv8: fsl-layerscape: SPL size reduction
York Sun
- [U-Boot] [PATCH] board/ls2080ardb: Add mcmemsize variable in default env
York Sun
- [U-Boot] [RESEND PATCH v3 1/7] armv8: lsch3: Add serdes and DDR voltage setup
York Sun
- [U-Boot] [PATCH] armv8: Remove dependency of SERDES for LS CHASIS3
York Sun
- [U-Boot] [PATCH][v2]board/ls2080ardb: Update board env based on SoC
York Sun
- [U-Boot] [PATCH] FSL PCI: Configure PCIe reference ratio
York Sun
- [U-Boot] [PATCH] armv8: ls1043a: disable IFC in SPL only when QSPI is used
York Sun
- [U-Boot] [PATCH 1/4] arm64: ls1043ardb: Add sd_bootcmd for distro fallback in case of sdboot
York Sun
- [U-Boot] [PATCH] spl: fit: Fixed incompatible type warning in spl_load_fit_image()
York Sun
- [U-Boot] [PATCH] spl: Fix compiling warning on gunzip argument
York Sun
- [U-Boot] [Patch v2] spl: Fix compiling warning on gunzip argument
York Sun
- [U-Boot] [PATCH] armv8: ls1043ardb: disable PPA loading during SPL stage for SD boot
York Sun
- [U-Boot] [PATCH v2 1/7] spl: fix assignment of board info to global data
York Sun
- [U-Boot] [PATCH] armv8: ls1043ardb: disable PPA loading during SPL stage for SD boot
York Sun
- [U-Boot] [PATCH v2 1/7] spl: fix assignment of board info to global data
York Sun
- [U-Boot] [Patch v2] spl: Fix compiling warning on gunzip argument
York Sun
- [U-Boot] Please pull u-boot-fsl-qoriq master
York Sun
- [U-Boot] [PATCH v2 5/7] armv8: layerscape: Eanble falcon boot
York Sun
- [U-Boot] [PATCH] armv7: ls1021a: Fix marco CONFIG_LS102XA
York Sun
- [U-Boot] [PATCH] armv8: fsl-layerscape: Put SATA code under SATA configs
York Sun
- [U-Boot] [PATCH 1/1] board/ls2080ardb: Remove CONFIG_DISPLAY_BOARDINFO_LATE
York Sun
- [U-Boot] [PATCH 1/1] board/ls2081ardb: Update QSPI flash type from n25q512a to s25fs512s
York Sun
- [U-Boot] [PATCH] pci: layerscape: Fixup iommu-map for LS208xA
York Sun
- [U-Boot] [PATCH] armv8: fsl: ifc: Put IFC related code under CONFIG_FSL_IFC
York Sun
- [U-Boot] [PATCH] armv8: fsl: i2c: Put I2C related code under CONFIG_SYS_I2C
York Sun
- [U-Boot] [PATCH] board/ls2080ardb: Add mcmemsize variable in default env
York Sun
- [U-Boot] [PATCH][v3]board/ls2080ardb: Update board env based on SoC
York Sun
- [U-Boot] [v2] armv8: ls1043a: disable IFC in SPL only when QSPI is used
York Sun
- [U-Boot] [PATCH] armv8: ls1043ardb: disable PPA loading during SPL stage for SD boot
York Sun
- [U-Boot] [PATCH] armv8: ls1046ardb: disable PPA loading during SPL stage for SD boot
York Sun
- [U-Boot] [PATCH v3 0/7] Enable falcon boot for LS1043ARDB
York Sun
- [U-Boot] [PATCH v3 1/7] spl: fix assignment of board info to global data
York Sun
- [U-Boot] [PATCH v3 2/7] cmd: spl: fix compiling error when CONFIG_CMD_SPL_WRITE_SIZE not defined
York Sun
- [U-Boot] [PATCH v3 3/7] armv8: fsl-layerscape: Avoid running dram_init_banksize again
York Sun
- [U-Boot] [PATCH v3 4/7] armv8: ls1043ardb: Use static DDR setting for SPL boot
York Sun
- [U-Boot] [PATCH v3 5/7] armv8: layerscape: Enable falcon boot
York Sun
- [U-Boot] [PATCH v3 6/7] armv8: ls1043ardb: Enable spl_board_init() function
York Sun
- [U-Boot] [PATCH v3 7/7] armv8: ls1043ardb_sdcard: prepare falcon boot
York Sun
- [U-Boot] [PATCH v3 4/7] armv8: ls1043ardb: Use static DDR setting for SPL boot
York Sun
- [U-Boot] [PATCH v3 5/7] armv8: layerscape: Enable falcon boot
York Sun
- [U-Boot] [PATCH v3 4/7] armv8: ls1043ardb: Use static DDR setting for SPL boot
York Sun
- [U-Boot] [PATCH] mmc: sunxi: Only update timing mode bit when enabling new timing mode
Jagan Teki
- [U-Boot] [PATCH] sunxi: Change SUNXI_GMAC to SUN7I_GMAC in sources
Jagan Teki
- [U-Boot] QSPI "sf probe ...", "sf read ..." on Altera SoC FPGA
Jagan Teki
- [U-Boot] [PATCH] sunxi: Change SUNXI_GMAC to SUN7I_GMAC in sources
Jagan Teki
- [U-Boot] [PATCH v2] sunxi: Fix CONFIG_SUNXI_GMAC references
Jagan Teki
- [U-Boot] Pull request: u-boot-sunxi/master
Jagan Teki
- [U-Boot] Pull request: u-boot-sunxi/master
Jagan Teki
- [U-Boot] [PATCH v2] sunxi: Fix CONFIG_SUNXI_GMAC references
Jagan Teki
- [U-Boot] [Patch V2 1/4] spi: davinci_spi: Add da830-spi support for DM
Jagan Teki
- [U-Boot] [Patch V2 2/4] arm: da850-evm: Enable DM and device tree support for da850-evm
Jagan Teki
- [U-Boot] [Patch V2 3/4] arm: da850-evm: Enable MTD Parts
Jagan Teki
- [U-Boot] [Patch V2 4/4] ARM: da850-evm: Enable DM_I2C
Jagan Teki
- [U-Boot] [PATCH v2 12/19] rockchip: spi: Convert to livetree
Jagan Teki
- [U-Boot] [PATCH v3] rk3288: Add Vyasa initial board support
Jagan Teki
- [U-Boot] SPI NAND support
Jagan Teki
- [U-Boot] [U-Boot,v3] rk3288: Add Vyasa initial board support
Jagan Teki
- [U-Boot] [PATCH v4] rk3288: Add Vyasa initial board support
Jagan Teki
- [U-Boot] [PATCH 1/1] sunxi: Add support for A20-OLinuXino-MICRO-eMMC
Jagan Teki
- [U-Boot] [PATCH 0/6] i.MX6Q: Add SPL_OF_CONTROL support
Jagan Teki
- [U-Boot] [PATCH 1/6] i.MX6: engicam: Fix MAINTAINERS/README
Jagan Teki
- [U-Boot] [PATCH 2/6] imx6ul: geam6ul/isiot: Fix to MMC devices
Jagan Teki
- [U-Boot] [PATCH 3/6] i.MX6: engicam: Move set_fdt_file to common
Jagan Teki
- [U-Boot] [PATCH 4/6] i.MX6Q: icorem6: Move spl load fit to common/spl
Jagan Teki
- [U-Boot] [PATCH 5/6] i.MX6Q: icore: Add SPL_OF_CONTROL support
Jagan Teki
- [U-Boot] [PATCH 6/6] i.MX6Q: icore: Add imx6q board for icore/icore_rqs
Jagan Teki
- [U-Boot] [PATCH v4] spi: fsl_qspi: Add controller busy check before new spi operation
Jagan Teki
- [U-Boot] [PATCH v2] mtd/spi: Add MT35XU512ABA1G12 NOR flash support
Jagan Teki
- [U-Boot] [PATCH] sf: Fix S25FL116K entry
Jagan Teki
- [U-Boot] [PATCH] Fix s25fl256s position in spi_flash_ids list
Jagan Teki
- [U-Boot] Pull request: u-boot-spi/master
Jagan Teki
- [U-Boot] Pull request: u-boot-spi/master
Jagan Teki
- [U-Boot] [PATCH] sf: bar: Clean BA24 Bank Address Register bit after read/write/erase operation
Jagan Teki
- [U-Boot] [PATCH V4 1/5] arm: dts: da850: Migrate da850-evm DTS files from Linux 4.13-RC5
Jagan Teki
- [U-Boot] [PATCH] spi: fsl_qspi: Copy 16 byte aligned data in TX FIFO
Jagan Teki
- [U-Boot] ZynqMP qspi
Jagan Teki
- [U-Boot] [PATCH v2] sf: bar: Clean BA24 Bank Address Register bit after read/write/erase operation
Jagan Teki
- [U-Boot] [PATCH v2] sf: bar: Clean BA24 Bank Address Register bit after read/write/erase operation
Jagan Teki
- [U-Boot] [PATCH] SPL: SPI: sunxi: add SPL FIT image support
Jagan Teki
- [U-Boot] [PATCH v2] sf: bar: Clean BA24 Bank Address Register bit after read/write/erase operation
Jagan Teki
- [U-Boot] [PATCH v2] sf: bar: Clean BA24 Bank Address Register bit after read/write/erase operation
Jagan Teki
- [U-Boot] FSL PCIe LTSSM >= PCI_LTSSM_L0 equals link up
Joakim Tjernlund
- [U-Boot] setup of PEX_GCLK_RATIO in E500 CPUs(P2010) missing ?
Joakim Tjernlund
- [U-Boot] setup of PEX_GCLK_RATIO in E500 CPUs(P2010) missing ?
Joakim Tjernlund
- [U-Boot] setup of PEX_GCLK_RATIO in E500 CPUs(P2010) missing ?
Joakim Tjernlund
- [U-Boot] [PATCH] FSL PCI: Configure PCIe reference ratio
Joakim Tjernlund
- [U-Boot] [PATCH v3] patman: add support for omitting bouncing addresses
Dr. Philipp Tomsich
- [U-Boot] rockchip: enable rk322x sysreset driver
Dr. Philipp Tomsich
- [U-Boot] [U-Boot, 3/3] rockchip: firefly-rk3399: enable ATF and dwmmc
Dr. Philipp Tomsich
- [U-Boot] [PULL] Please pull u-boot-rockchip/master
Dr. Philipp Tomsich
- [U-Boot] [PATCH] rockchip: pinctrl: use fdtdec_get_int_array() to get interrupt
Dr. Philipp Tomsich
- [U-Boot] [PATCH v2 1/5] rockchip: rk322x: update dram bank size
Dr. Philipp Tomsich
- [U-Boot] [PATCH 1/3] spl: update bl31_entry() with new name and parameter
Dr. Philipp Tomsich
- [U-Boot] [PATCH 2/2] rockchip: ram: rk3399: update reg map for of-platdata
Dr. Philipp Tomsich
- [U-Boot] [PATCH] rockchip: firefly-rk3399: enable SPL_SYSRESET config
Dr. Philipp Tomsich
- [U-Boot] [PATCH 2/2] rockchip: ram: rk3399: update reg map for of-platdata
Dr. Philipp Tomsich
- [U-Boot] [PATCH] rockchip: enable SPL_SYSRESET config for all sockchip SoCs
Dr. Philipp Tomsich
- [U-Boot] [PULL] Please pull u-boot-rockchip/master
Dr. Philipp Tomsich
- [U-Boot] [PATCH v2 06/19] net: phy: micrel: Convert to livetree
Dr. Philipp Tomsich
- [U-Boot] [PATCH 1/1] spl: u-boot-spl-nodtb.bin: remove .got and .got.plt sections
Dr. Philipp Tomsich
- [U-Boot] [U-Boot,V9,1/4] usb: rockchip: add the rockusb gadget
Dr. Philipp Tomsich
- [U-Boot] [U-Boot,v3] rk3288: Add Vyasa initial board support
Dr. Philipp Tomsich
- [U-Boot] [U-Boot, v4, 3/4] usb: dwc3: add support for 16 bit UTMI+ interface
Dr. Philipp Tomsich
- [U-Boot] [U-Boot, v4, 3/4] usb: dwc3: add support for 16 bit UTMI+ interface
Dr. Philipp Tomsich
- [U-Boot] [PATCH 0/4] move rockchip sdram driver to driver/ram
Dr. Philipp Tomsich
- [U-Boot] [U-Boot,v3] rk3288: Add Vyasa initial board support
Dr. Philipp Tomsich
- [U-Boot] [PATCH 2/2] rockchip: ram: rk3399: update reg map for of-platdata
Dr. Philipp Tomsich
- [U-Boot] [PATCH] rockchip: rk3399: spl: remove hard-coded addresses for GRF and SGRF
Dr. Philipp Tomsich
- [U-Boot] rockchip: add support for backing to bootrom download mode
Dr. Philipp Tomsich
- [U-Boot] [PATCH 05/10] rockchip: spl: rk3399: implement chip-specific board_spl_was_booted_from()
Dr. Philipp Tomsich
- [U-Boot] [PATCH 04/10] rockchip: spl: support a 'same-as-spl'-specifier in the spl-boot-order
Dr. Philipp Tomsich
- [U-Boot] [PATCH 09/10] power: spl: add SPL_DM_REGULATOR_FIXED in Kconfig
Dr. Philipp Tomsich
- [U-Boot] [RESEND PATCH 2/2] rockchip: dts: rk3399-puma: replace 'rockchip, vbus-gpio' with fixed regulator
Dr. Philipp Tomsich
- [U-Boot] rockchip: add support for backing to bootrom download mode
Dr. Philipp Tomsich
- [U-Boot] rockchip: add support for backing to bootrom download mode
Dr. Philipp Tomsich
- [U-Boot] [RESEND PATCH 0/6] rockchip: enable live tree on the RK3399 and validate on the RK3399-Q7
Dr. Philipp Tomsich
- [U-Boot] [RESEND PATCH 0/6] rockchip: enable live tree on the RK3399 and validate on the RK3399-Q7
Dr. Philipp Tomsich
- [U-Boot] [RESEND PATCH 0/6] rockchip: enable live tree on the RK3399 and validate on the RK3399-Q7
Dr. Philipp Tomsich
- [U-Boot] [PATCH 2/8] configs: rockchip: Enable the ROCKCHIP_SARADC config
Dr. Philipp Tomsich
- [U-Boot] [PATCH 4/8] clk: rockchip: Add Saradc clock support for rk3288
Dr. Philipp Tomsich
- [U-Boot] [PATCH 4/8] clk: rockchip: Add Saradc clock support for rk3288
Dr. Philipp Tomsich
- [U-Boot] [U-Boot, 6/8] clk: rockchip: Add rk3368 Saradc clock support
Dr. Philipp Tomsich
- [U-Boot] [PATCH 04/15] spl: fit: simplify logic for FDT loading for non-OS boots
Dr. Philipp Tomsich
- [U-Boot] [PATCH 04/15] spl: fit: simplify logic for FDT loading for non-OS boots
Dr. Philipp Tomsich
- [U-Boot] [U-Boot, 6/8] clk: rockchip: Add rk3368 Saradc clock support
Dr. Philipp Tomsich
- [U-Boot] [PATCH v2 0/3] support enter download mode on rockchip platform
Dr. Philipp Tomsich
- [U-Boot] [PATCH v2 0/3] support enter download mode on rockchip platform
Dr. Philipp Tomsich
- [U-Boot] [PATCH 2/3] rockchip: back-to-bootrom: replace assembly-implementation with C-code
Dr. Philipp Tomsich
- [U-Boot] Please pull u-boot-rockchip/master
Dr. Philipp Tomsich
- [U-Boot] [PATCH 2/3] rockchip: back-to-bootrom: replace assembly-implementation with C-code
Dr. Philipp Tomsich
- [U-Boot] [PATCH v2 0/5] rockchip: back-to-bootrom: replace assembly-implementation with C-code
Dr. Philipp Tomsich
- [U-Boot] [PATCH v2 0/5] rockchip: back-to-bootrom: replace assembly-implementation with C-code
Dr. Philipp Tomsich
- [U-Boot] [U-Boot,v2,00/14] Add rockchip SARADC support
Dr. Philipp Tomsich
- [U-Boot] [PATCH v2 0/5] rockchip: back-to-bootrom: replace assembly-implementation with C-code
Dr. Philipp Tomsich
- [U-Boot] [PATCH] rockchip: imply ADC and SARADC_ROCKCHIP on supported SoCs
Dr. Philipp Tomsich
- [U-Boot] [PATCH 06/13] log: Add an implemention of logging
Dr. Philipp Tomsich
- [U-Boot] [PATCH 06/13] log: Add an implemention of logging
Dr. Philipp Tomsich
- [U-Boot] [PATCH 06/13] log: Add an implemention of logging
Dr. Philipp Tomsich
- [U-Boot] [PATCH v2 0/5] rockchip: back-to-bootrom: replace assembly-implementation with C-code
Dr. Philipp Tomsich
- [U-Boot] setjmp/longjmp prototype in U-Boot
Dr. Philipp Tomsich
- [U-Boot] [PATCH v3 0/6] rockchip: back-to-bootrom: replace assembly-implementation with C-code
Dr. Philipp Tomsich
- [U-Boot] [PATCH v3 0/6] rockchip: back-to-bootrom: replace assembly-implementation with C-code
Dr. Philipp Tomsich
- [U-Boot] [PATCH v3 0/6] rockchip: back-to-bootrom: replace assembly-implementation with C-code
Dr. Philipp Tomsich
- [U-Boot] [PATCH v3 0/6] rockchip: back-to-bootrom: replace assembly-implementation with C-code
Dr. Philipp Tomsich
- [U-Boot] [PATCH v4 1/2] rockchip: rk322x: add sdram driver
Dr. Philipp Tomsich
- [U-Boot] [PATCH] rockchip: rk3188: ram: add support for 16bit row address
Dr. Philipp Tomsich
- [U-Boot] [PATCH 1/1] rockchip: rk3399: spl: implicit declaration back_to_bootrom
Dr. Philipp Tomsich
- [U-Boot] [U-Boot, v2, 2/5] power: pmic: rk816: support rk816 pmic
Dr. Philipp Tomsich
- [U-Boot] [PATCH] dm: core: Correct address cast in dev_read_addr_ptr()
Dr. Philipp Tomsich
- [U-Boot] [PULL] Please pull u-boot-rockchip/master
Dr. Philipp Tomsich
- [U-Boot] [PATCH] dm: core: Correct address cast in dev_read_addr_ptr()
Dr. Philipp Tomsich
- [U-Boot] [PATCH] dm: core: Correct address cast in dev_read_addr_ptr()
Dr. Philipp Tomsich
- [U-Boot] rockchip: i2c: fix >32 byte reads
Philipp Tomsich
- [U-Boot] rockchip: rk3288: update the mmc number for fastboot
Philipp Tomsich
- [U-Boot] [U-Boot, 3/3] rockchip: firefly-rk3399: enable ATF and dwmmc
Philipp Tomsich
- [U-Boot] rockchip: timer: fix U_BOOT_DRIVER name
Philipp Tomsich
- [U-Boot] rockchip: i2c: fix >32 byte reads
Philipp Tomsich
- [U-Boot] [U-Boot,v2,2/5] rockchip: rk322x: add sdram driver
Philipp Tomsich
- [U-Boot] [U-Boot, 1/3] configs: rockchip: add USB configs for evb-rv1108 board
Philipp Tomsich
- [U-Boot] [U-Boot, 2/3] ARM: dts: rockchip: add USB nodes for evb-rv1108
Philipp Tomsich
- [U-Boot] rockchip: rk322x: enable fastboot to set boot mode tag
Philipp Tomsich
- [U-Boot] [U-Boot, 1/3] configs: rockchip: add USB configs for evb-rv1108 board
Philipp Tomsich
- [U-Boot] [U-Boot, 2/3] ARM: dts: rockchip: add USB nodes for evb-rv1108
Philipp Tomsich
- [U-Boot] rockchip: enable rk322x sysreset driver
Philipp Tomsich
- [U-Boot] rockchip: rk322x: enable fastboot to set boot mode tag
Philipp Tomsich
- [U-Boot] rockchip: rk322x: Disable integrated macphy for saving power consuming
Philipp Tomsich
- [U-Boot] rockchip: enable SPL_SYSRESET config for all sockchip SoCs
Philipp Tomsich
- [U-Boot] rockchip: rk3328: fix syscon id table
Philipp Tomsich
- [U-Boot] rockchip: rk3328: fix syscon id table
Philipp Tomsich
- [U-Boot] rockchip: enable SPL_SYSRESET config for all sockchip SoCs
Philipp Tomsich
- [U-Boot] rockchip: enable SPL_SYSRESET config for all sockchip SoCs
Philipp Tomsich
- [U-Boot] rockchip: rk3328: fix syscon id table
Philipp Tomsich
- [U-Boot] [PATCH v2 00/19] rockchip: convert the RK3368 to OF_LIVE and validate on the RK3368-uQ7
Philipp Tomsich
- [U-Boot] [PATCH v2 01/19] bootstage: adjust Makefile to allow including bootstage in SPL, but not in TPL
Philipp Tomsich
- [U-Boot] [PATCH v2 02/19] dm: timer: Convert to livetree
Philipp Tomsich
- [U-Boot] [PATCH v2 03/19] dm: timer: handle being called before dm_root is ready
Philipp Tomsich
- [U-Boot] [PATCH v2 04/19] dm: core: add dev_read_addr_ptr()
Philipp Tomsich
- [U-Boot] [PATCH v2 05/19] net: designware: Convert to livetree
Philipp Tomsich
- [U-Boot] [PATCH v2 06/19] net: phy: micrel: Convert to livetree
Philipp Tomsich
- [U-Boot] [PATCH v2 07/19] rockchip: mmc: convert to livetree
Philipp Tomsich
- [U-Boot] [PATCH v2 08/19] rockchip: timer: implement timer_get_boot_us
Philipp Tomsich
- [U-Boot] [PATCH v2 09/19] rockchip: timer: Convert to livetree
Philipp Tomsich
- [U-Boot] [PATCH v2 10/19] rockchip: clk: rk3368: Convert to livetree
Philipp Tomsich
- [U-Boot] [PATCH v2 11/19] rockchip: pinctrl: rk3368: Convert to livetree
Philipp Tomsich
- [U-Boot] [PATCH v2 12/19] rockchip: spi: Convert to livetree
Philipp Tomsich
- [U-Boot] [PATCH v2 13/19] rockchip: sdhci: Convert to livetree
Philipp Tomsich
- [U-Boot] [PATCH v2 14/19] rockchip: rk8xx: remove unused header includes
Philipp Tomsich
- [U-Boot] [PATCH v2 15/19] rockchip: i2c: Convert to livetree
Philipp Tomsich
- [U-Boot] [PATCH v2 16/19] rockchip: gpio: convert to livetree
Philipp Tomsich
- [U-Boot] [PATCH v2 17/19] rockchip: gpio: remove outdated/misleading comment
Philipp Tomsich
- [U-Boot] [PATCH v2 18/19] rockchip: dts: rk3368-lion: add /chosen/tick-timer
Philipp Tomsich
- [U-Boot] [PATCH v2 19/19] rockchip: lion-rk3368: defconfig: resync w/ OF_LIVE and BOOTSTAGE enabled
Philipp Tomsich
- [U-Boot] [PATCH 1/2] board: lion_rk3368: update README flash instructions
Philipp Tomsich
- [U-Boot] [PATCH 2/2] board: puma_rk3399: update README flash instructions
Philipp Tomsich
- [U-Boot] [PATCH] rockchip: rk3399: spl: remove hard-coded addresses for GRF and SGRF
Philipp Tomsich
- [U-Boot] [PATCH] rockchip: rk3399: spl: convert to using BOOT_DEVICE_BOOTROM
Philipp Tomsich
- [U-Boot] [PATCH 00/10] For the RK3399-Q7, we have a few additional features in the SPL boot
Philipp Tomsich
- [U-Boot] [PATCH 01/10] rockchip: rk3399: make spl_board_init board-specific
Philipp Tomsich
- [U-Boot] [PATCH 02/10] rockchip: bootrom: add definitions to retrieve BROM boot-source
Philipp Tomsich
- [U-Boot] [PATCH 03/10] rockchip: spl: add documentation for spl_node_to_boot_device()
Philipp Tomsich
- [U-Boot] [PATCH 04/10] rockchip: spl: support a 'same-as-spl'-specifier in the spl-boot-order
Philipp Tomsich
- [U-Boot] [PATCH 05/10] rockchip: spl: rk3399: implement chip-specific board_spl_was_booted_from()
Philipp Tomsich
- [U-Boot] [PATCH 06/10] rockchip: dts: rk3399-puma: add 'same-as-spl' to the front of the boot-order
Philipp Tomsich
- [U-Boot] [PATCH 07/10] rockchip: puma-rk3399: update board_init()
Philipp Tomsich
- [U-Boot] [PATCH 08/10] rockchip: rk3399-puma: add boot-on regulator to override BIOS_DISABLE
Philipp Tomsich
- [U-Boot] [PATCH 09/10] power: spl: add SPL_DM_REGULATOR_FIXED in Kconfig
Philipp Tomsich
- [U-Boot] [PATCH 10/10] rockchip: defconfig: puma-rk3399: update for DM_REGULATOR support in SPL
Philipp Tomsich
- [U-Boot] [U-Boot, v4, 3/4] usb: dwc3: add support for 16 bit UTMI+ interface
Philipp Tomsich
- [U-Boot] [PATCH 1/2] rockchip: clk: rk3399: add clk_enable function and support USB HOST0/1
Philipp Tomsich
- [U-Boot] [PATCH 2/2] rockchip: dts: rk3399-puma: replace 'rockchip, vbus-gpio' with fixed regulator
Philipp Tomsich
- [U-Boot] [PATCH v3 00/19] rockchip: convert the RK3368 to OF_LIVE and validate on the RK3368-uQ7
Philipp Tomsich
- [U-Boot] [PATCH v3 01/19] bootstage: adjust Makefile to allow including bootstage in SPL, but not in TPL
Philipp Tomsich
- [U-Boot] [PATCH v3 02/19] dm: timer: Convert to livetree
Philipp Tomsich
- [U-Boot] [PATCH v3 03/19] dm: timer: handle being called before dm_root is ready
Philipp Tomsich
- [U-Boot] [PATCH v3 04/19] dm: core: add dev_read_addr_ptr()
Philipp Tomsich
- [U-Boot] [PATCH v3 05/19] net: designware: Convert to livetree
Philipp Tomsich
- [U-Boot] [PATCH v3 06/19] net: phy: micrel: Convert to livetree
Philipp Tomsich
- [U-Boot] [PATCH v3 07/19] rockchip: mmc: convert to livetree
Philipp Tomsich
- [U-Boot] [PATCH v3 08/19] rockchip: timer: implement timer_get_boot_us
Philipp Tomsich
- [U-Boot] [PATCH v3 09/19] rockchip: timer: Convert to livetree
Philipp Tomsich
- [U-Boot] [PATCH v3 10/19] rockchip: clk: rk3368: Convert to livetree
Philipp Tomsich
- [U-Boot] [PATCH v3 11/19] rockchip: pinctrl: rk3368: Convert to livetree
Philipp Tomsich
- [U-Boot] [PATCH v3 12/19] rockchip: spi: Convert to livetree
Philipp Tomsich
- [U-Boot] [PATCH v3 13/19] rockchip: sdhci: Convert to livetree
Philipp Tomsich
- [U-Boot] [PATCH v3 14/19] rockchip: rk8xx: remove unused header includes
Philipp Tomsich
- [U-Boot] [PATCH v3 15/19] rockchip: i2c: Convert to livetree
Philipp Tomsich
- [U-Boot] [PATCH v3 16/19] rockchip: gpio: convert to livetree
Philipp Tomsich
- [U-Boot] [PATCH v3 17/19] rockchip: gpio: remove outdated/misleading comment
Philipp Tomsich
- [U-Boot] [PATCH v3 18/19] rockchip: dts: rk3368-lion: add /chosen/tick-timer
Philipp Tomsich
- [U-Boot] [PATCH v3 19/19] rockchip: lion-rk3368: defconfig: resync w/ OF_LIVE and BOOTSTAGE enabled
Philipp Tomsich
- [U-Boot] [U-Boot,1/3] rk3288: vyasa: Add TPL support
Philipp Tomsich
- [U-Boot] [U-Boot,2/3] rk3288: vyasa: Add falcon mode support
Philipp Tomsich
- [U-Boot] [U-Boot,3/3] rk3288: spl: Add dram_init_banksize
Philipp Tomsich
- [U-Boot] [U-Boot,v3] rk3288: Add Vyasa initial board support
Philipp Tomsich
- [U-Boot] [U-Boot, v2, 1/2] rockchip: board: lion_rk3368: update README flash instructions
Philipp Tomsich
- [U-Boot] [U-Boot, v2, 2/2] rockchip: board: puma_rk3399: update README flash instructions
Philipp Tomsich
- [U-Boot] [U-Boot, v2, 1/2] rockchip: board: lion_rk3368: update README flash instructions
Philipp Tomsich
- [U-Boot] [U-Boot, v2, 2/2] rockchip: board: puma_rk3399: update README flash instructions
Philipp Tomsich
- [U-Boot] [U-Boot,v3] rk3288: Add Vyasa initial board support
Philipp Tomsich
- [U-Boot] [U-Boot,3/3] rk3288: spl: Add dram_init_banksize
Philipp Tomsich
- [U-Boot] [U-Boot,2/3] rk3288: vyasa: Add falcon mode support
Philipp Tomsich
- [U-Boot] [U-Boot,V9,1/4] usb: rockchip: add the rockusb gadget
Philipp Tomsich
- [U-Boot] [U-Boot,V9,2/4] usb: rockchip: add rockusb command
Philipp Tomsich
- [U-Boot] [U-Boot, V9, 3/4] rockchip:usb: add a simple readme for rockusb
Philipp Tomsich
- [U-Boot] [U-Boot, V9, 4/4] rockchip: rk3288: enable rockusb support on rk3288 based device
Philipp Tomsich
- [U-Boot] [U-Boot,v3] rk3288: Add Vyasa initial board support
Philipp Tomsich
- [U-Boot] [U-Boot,3/3] rk3288: spl: Add dram_init_banksize
Philipp Tomsich
- [U-Boot] [U-Boot,2/3] rk3288: vyasa: Add falcon mode support
Philipp Tomsich
- [U-Boot] [U-Boot,V9,1/4] usb: rockchip: add the rockusb gadget
Philipp Tomsich
- [U-Boot] [U-Boot, 2/4] rockchip: rk3188: move sdram driver to driver/ram
Philipp Tomsich
- [U-Boot] [U-Boot, 3/4] rockchip: rk3288: move sdram driver to driver/ram
Philipp Tomsich
- [U-Boot] [U-Boot, 4/4] rockchip: rk3328: move sdram driver to driver/ram
Philipp Tomsich
- [U-Boot] [U-Boot, 1/4] rockchip: rk3399: move sdram driver to driver/ram
Philipp Tomsich
- [U-Boot] [U-Boot, 2/4] rockchip: rk3188: move sdram driver to driver/ram
Philipp Tomsich
- [U-Boot] [U-Boot, 3/4] rockchip: rk3288: move sdram driver to driver/ram
Philipp Tomsich
- [U-Boot] [U-Boot, 4/4] rockchip: rk3328: move sdram driver to driver/ram
Philipp Tomsich
- [U-Boot] [U-Boot, 1/4] rockchip: rk3399: move sdram driver to driver/ram
Philipp Tomsich
- [U-Boot] [U-Boot, v2, 1/2] rockchip: board: lion_rk3368: update README flash instructions
Philipp Tomsich
- [U-Boot] [U-Boot, v3, 01/19] bootstage: adjust Makefile to allow including bootstage in SPL, but not in TPL
Philipp Tomsich
- [U-Boot] [U-Boot,v3,02/19] dm: timer: Convert to livetree
Philipp Tomsich
- [U-Boot] [U-Boot, v3, 03/19] dm: timer: handle being called before dm_root is ready
Philipp Tomsich
- [U-Boot] [U-Boot,v3,04/19] dm: core: add dev_read_addr_ptr()
Philipp Tomsich
- [U-Boot] [U-Boot, v3, 05/19] net: designware: Convert to livetree
Philipp Tomsich
- [U-Boot] [U-Boot, v3, 06/19] net: phy: micrel: Convert to livetree
Philipp Tomsich
- [U-Boot] [U-Boot,v3,07/19] rockchip: mmc: convert to livetree
Philipp Tomsich
- [U-Boot] [U-Boot, v3, 08/19] rockchip: timer: implement timer_get_boot_us
Philipp Tomsich
- [U-Boot] [U-Boot, v3, 09/19] rockchip: timer: Convert to livetree
Philipp Tomsich
- [U-Boot] [U-Boot, v3, 10/19] rockchip: clk: rk3368: Convert to livetree
Philipp Tomsich
- [U-Boot] [U-Boot, v3, 11/19] rockchip: pinctrl: rk3368: Convert to livetree
Philipp Tomsich
- [U-Boot] [U-Boot,v3,12/19] rockchip: spi: Convert to livetree
Philipp Tomsich
- [U-Boot] [U-Boot, v3, 13/19] rockchip: sdhci: Convert to livetree
Philipp Tomsich
- [U-Boot] [U-Boot, v3, 14/19] rockchip: rk8xx: remove unused header includes
Philipp Tomsich
- [U-Boot] [U-Boot,v3,15/19] rockchip: i2c: Convert to livetree
Philipp Tomsich
- [U-Boot] [U-Boot,v3,16/19] rockchip: gpio: convert to livetree
Philipp Tomsich
- [U-Boot] [U-Boot, v3, 17/19] rockchip: gpio: remove outdated/misleading comment
Philipp Tomsich
- [U-Boot] [U-Boot, v3, 18/19] rockchip: dts: rk3368-lion: add /chosen/tick-timer
Philipp Tomsich
- [U-Boot] [U-Boot, v3, 19/19] rockchip: lion-rk3368: defconfig: resync w/ OF_LIVE and BOOTSTAGE enabled
Philipp Tomsich
- [U-Boot] [U-Boot, v2, 2/2] rockchip: board: puma_rk3399: update README flash instructions
Philipp Tomsich
- [U-Boot] [U-Boot, 1/2] rockchip: rk3368: add ENV_MEM_LAYOUT to extra env settings
Philipp Tomsich
- [U-Boot] [U-Boot, 2/2] rockchip: rk3368: add the missing target and pinctrl config for sheep board
Philipp Tomsich
- [U-Boot] [U-Boot, 1/2] rockchip: rk3368: add ENV_MEM_LAYOUT to extra env settings
Philipp Tomsich
- [U-Boot] [U-Boot, 2/2] rockchip: rk3368: add the missing target and pinctrl config for sheep board
Philipp Tomsich
- [U-Boot] [U-Boot,v4] rk3288: Add Vyasa initial board support
Philipp Tomsich
- [U-Boot] [RESEND PATCH 0/2] rockchip: rk3399-puma: migrate from 'rockchip, vbus-gpio' to a fixed regulator
Philipp Tomsich
- [U-Boot] [RESEND PATCH 1/2] rockchip: clk: rk3399: add clk_enable function and support USB HOST0/1
Philipp Tomsich
- [U-Boot] [RESEND PATCH 2/2] rockchip: dts: rk3399-puma: replace 'rockchip, vbus-gpio' with fixed regulator
Philipp Tomsich
- [U-Boot] [RESEND PATCH 0/6] rockchip: enable live tree on the RK3399 and validate on the RK3399-Q7
Philipp Tomsich
- [U-Boot] [RESEND PATCH 1/6] rockchip: clk: rk3399: Convert to livetree
Philipp Tomsich
- [U-Boot] [RESEND PATCH 2/6] rockchip: xhci: Convert to livetree
Philipp Tomsich
- [U-Boot] [RESEND PATCH 3/6] rockchip: efuse: change to use dev_read_addr_ptr
Philipp Tomsich
- [U-Boot] [RESEND PATCH 4/6] usb: dwc2: convert to livetree
Philipp Tomsich
- [U-Boot] [RESEND PATCH 5/6] usb: host: ehci-generic: convert to livetree
Philipp Tomsich
- [U-Boot] [RESEND PATCH 6/6] rockchip: defconfig: puma-rk3399: enable OF_LIVE (live tree)
Philipp Tomsich
- [U-Boot] [RESEND PATCH 00/10] rockchip: puma-rk3399: support 'same-as-spl' for boot-order and always power-up eMMC/SPI
Philipp Tomsich
- [U-Boot] [RESEND PATCH 01/10] rockchip: rk3399: make spl_board_init board-specific
Philipp Tomsich
- [U-Boot] [RESEND PATCH 02/10] rockchip: bootrom: add definitions to retrieve BROM boot-source
Philipp Tomsich
- [U-Boot] [RESEND PATCH 03/10] rockchip: spl: add documentation for spl_node_to_boot_device()
Philipp Tomsich
- [U-Boot] [RESEND PATCH 04/10] rockchip: spl: support a 'same-as-spl'-specifier in the spl-boot-order
Philipp Tomsich
- [U-Boot] [RESEND PATCH 05/10] rockchip: spl: rk3399: implement chip-specific board_spl_was_booted_from()
Philipp Tomsich
- [U-Boot] [RESEND PATCH 06/10] rockchip: dts: rk3399-puma: add 'same-as-spl' to the front of the boot-order
Philipp Tomsich
- [U-Boot] [RESEND PATCH 07/10] rockchip: puma-rk3399: update board_init()
Philipp Tomsich
- [U-Boot] [RESEND PATCH 08/10] rockchip: rk3399-puma: add boot-on regulator to override BIOS_DISABLE
Philipp Tomsich
- [U-Boot] [RESEND PATCH 09/10] power: spl: add SPL_DM_REGULATOR_FIXED in Kconfig
Philipp Tomsich
- [U-Boot] [RESEND PATCH 10/10] rockchip: defconfig: puma-rk3399: update for DM_REGULATOR support in SPL
Philipp Tomsich
- [U-Boot] [U-Boot, 1/2] rockchip: rk3368: add ENV_MEM_LAYOUT to extra env settings
Philipp Tomsich
- [U-Boot] [U-Boot, 2/2] rockchip: rk3368: add the missing target and pinctrl config for sheep board
Philipp Tomsich
- [U-Boot] [U-Boot,01/10] lib: add TPL_OF_LIBFDT option for TPL
Philipp Tomsich
- [U-Boot] [U-Boot, 02/10] arm: add option for TPL support in arm 32bit
Philipp Tomsich
- [U-Boot] [U-Boot,03/10] arm: add a separate stack for TPL
Philipp Tomsich
- [U-Boot] [U-Boot,04/10] rockchip: rk322x: enable tpl support
Philipp Tomsich
- [U-Boot] [U-Boot, 05/10] sysreset: enable driver support in SPL/TPL
Philipp Tomsich
- [U-Boot] [U-Boot, 06/10] spl: add support to booting with OP-TEE
Philipp Tomsich
- [U-Boot] [U-Boot, 07/10] rockchip: rk322x: dts: enable uart2 for SPL/TPL
Philipp Tomsich
- [U-Boot] [U-Boot, 08/10] rockchip: evb-rk3229: add fit source file for itb
Philipp Tomsich
- [U-Boot] [U-Boot, 09/10] rockchip: evb-rk3229: add README file for OP-TEE support
Philipp Tomsich
- [U-Boot] [U-Boot, 10/10] rockchip: evb-rk322x: update defconfig with tpl and optee support
Philipp Tomsich
- [U-Boot] [U-Boot,v3,1/2] rockchip: rk322x: add sdram driver
Philipp Tomsich
- [U-Boot] rockchip: add support for backing to bootrom download mode
Philipp Tomsich
- [U-Boot] [U-Boot, 3/3] rockchip: remove CONFIG_SPL_ATF_TEXT_BASE for all boards
Philipp Tomsich
- [U-Boot] [U-Boot, 2/3] spl: remove SPL_ATF_TEXT_BASE config option
Philipp Tomsich
- [U-Boot] [U-Boot, 1/3] spl: update bl31_entry() with new name and parameter
Philipp Tomsich
- [U-Boot] [U-Boot, 2/2] rockchip: ram: rk3399: update reg map for of-platdata
Philipp Tomsich
- [U-Boot] [U-Boot, 1/2] rockchip: sdhci: update reg map for of-platdata
Philipp Tomsich
- [U-Boot] [U-Boot, v3, 2/2] rockchip: dts: rk3229: remove dram channel info
Philipp Tomsich
- [U-Boot] [U-Boot,v2,1/3] rockchip: rk3399: detect boot mode
Philipp Tomsich
- [U-Boot] [U-Boot, v2, 3/4] rockchip: add BOOT_LOADER support for boot mode
Philipp Tomsich
- [U-Boot] rockchip: add support for backing to bootrom download mode
Philipp Tomsich
- [U-Boot] [U-Boot, v2, 2/3] rockchip: firefly-rk3399: add FIT for rk3399
Philipp Tomsich
- [U-Boot] [U-Boot, v2, 1/3] rockchip: rk3399-evb: add script for atf fit
Philipp Tomsich
- [U-Boot] [U-Boot, v2, 3/3] rockchip: evb-rk3399: update document for board bring up
Philipp Tomsich
- [U-Boot] [U-Boot, v2, 1/4] rockchip: rk3229: move usb gadget into defconfig
Philipp Tomsich
- [U-Boot] [U-Boot, v2, 2/4] rockchip: rk322x: update the sysreg number for boot mode
Philipp Tomsich
- [U-Boot] [U-Boot, v2, 4/4] rockchip: enable rockusb for all rockchip SoCs
Philipp Tomsich
- [U-Boot] [U-Boot, 06/10] spl: add support to booting with OP-TEE
Philipp Tomsich
- [U-Boot] [U-Boot, 07/10] rockchip: rk322x: dts: enable uart2 for SPL/TPL
Philipp Tomsich
- [U-Boot] [U-Boot,01/10] lib: add TPL_OF_LIBFDT option for TPL
Philipp Tomsich
- [U-Boot] [U-Boot, 02/10] arm: add option for TPL support in arm 32bit
Philipp Tomsich
- [U-Boot] [U-Boot,03/10] arm: add a separate stack for TPL
Philipp Tomsich
- [U-Boot] [U-Boot,04/10] rockchip: rk322x: enable tpl support
Philipp Tomsich
- [U-Boot] [U-Boot, 05/10] sysreset: enable driver support in SPL/TPL
Philipp Tomsich
- [U-Boot] [U-Boot, 08/10] rockchip: evb-rk3229: add fit source file for itb
Philipp Tomsich
- [U-Boot] [U-Boot, 10/10] rockchip: evb-rk322x: update defconfig with tpl and optee support
Philipp Tomsich
- [U-Boot] [U-Boot, RESEND, 2/2] rockchip: dts: rk3399-puma: replace 'rockchip, vbus-gpio' with fixed regulator
Philipp Tomsich
- [U-Boot] [U-Boot, RESEND, 1/6] rockchip: clk: rk3399: Convert to livetree
Philipp Tomsich
- [U-Boot] [U-Boot, RESEND, 3/6] rockchip: efuse: change to use dev_read_addr_ptr
Philipp Tomsich
- [U-Boot] [U-Boot, RESEND, 6/6] rockchip: defconfig: puma-rk3399: enable OF_LIVE (live tree)
Philipp Tomsich
- [U-Boot] [U-Boot, RESEND, 1/2] rockchip: clk: rk3399: add clk_enable function and support USB HOST0/1
Philipp Tomsich
- [U-Boot] [PATCH 01/15] image: add IH_OS_ARM_TRUSTED_FIRMWARE for ARM Trusted Firmware
Philipp Tomsich
- [U-Boot] [PATCH 02/15] spl: add a fdt_addr field to spl_image_info
Philipp Tomsich
- [U-Boot] [PATCH 03/15] spl: change load_addr and entry_point to uintptr_t
Philipp Tomsich
- [U-Boot] [PATCH 04/15] spl: fit: simplify logic for FDT loading for non-OS boots
Philipp Tomsich
- [U-Boot] [PATCH 05/15] spl: fit: implement fdt_record_loadable
Philipp Tomsich
- [U-Boot] [PATCH 06/15] spl: fit: implement recording of loadables into /fit-images
Philipp Tomsich
- [U-Boot] [PATCH 07/15] spl: atf: introduce spl_invoke_atf and make bl31_entry private
Philipp Tomsich
- [U-Boot] [PATCH 08/15] spl: rename config item SPL_ATF_SUPPORT to SPL_ATF
Philipp Tomsich
- [U-Boot] [PATCH 09/15] spl: atf: drop the SPL_ATF_TEXT_BASE configuration item
Philipp Tomsich
- [U-Boot] [PATCH 10/15] rockchip: dts: rk3399-puma: add /config/arm-trusted-firmware, reset-gpio property
Philipp Tomsich
- [U-Boot] [PATCH 11/15] rockchip: defconfig: firefly-rk3399: sync up with SPL changes for ATF
Philipp Tomsich
- [U-Boot] [PATCH 12/15] rockchip: board: puma-rk3399: update .its file to use new features
Philipp Tomsich
- [U-Boot] [PATCH 13/15] rockchip: board: lion-rk3368: update .its file
Philipp Tomsich
- [U-Boot] [PATCH 14/15] rockchip: defconfig: puma-rk3399: sync up with SPL changes for ATF
Philipp Tomsich
- [U-Boot] [PATCH 15/15] rockchip: defconfig: lion-rk3368: sync up with SPL changes for ATF
Philipp Tomsich
- [U-Boot] [U-Boot, 1/5] rockchip: i2c: rk3328: support i2c for rk3328 SoC
Philipp Tomsich
- [U-Boot] [U-Boot,2/5] power: pmic: rk816: support rk816 pmic
Philipp Tomsich
- [U-Boot] [U-Boot,3/5] power: pmic: rk805: support rk805 pmic
Philipp Tomsich
- [U-Boot] [U-Boot, 4/5] configs: rk3328: add support for pmic rk8xx and regulator and i2c driver
Philipp Tomsich
- [U-Boot] [U-Boot, 5/5] rockchip: dts: rk3328-evb: add i2c1 and rk805 nodes
Philipp Tomsich
- [U-Boot] [U-Boot,1/8] adc: Add driver for Rockchip Saradc
Philipp Tomsich
- [U-Boot] [U-Boot, 3/8] clk: rockchip: Add rv1108 Saradc clock support
Philipp Tomsich
- [U-Boot] [U-Boot, 4/8] clk: rockchip: Add Saradc clock support for rk3288
Philipp Tomsich
- [U-Boot] [U-Boot, 5/8] clk: rockchip: Add rk3328 Saradc clock support
Philipp Tomsich
- [U-Boot] [U-Boot, 6/8] clk: rockchip: Add rk3368 Saradc clock support
Philipp Tomsich
- [U-Boot] [U-Boot, 7/8] clk: rockchip: Add rk3399 Saradc clock support
Philipp Tomsich
- [U-Boot] [U-Boot, 8/8] arm: dts: rv1108: Add Saradc node at dtsi level
Philipp Tomsich
- [U-Boot] [U-Boot, 1/5] rockchip: i2c: rk3328: support i2c for rk3328 SoC
Philipp Tomsich
- [U-Boot] [U-Boot, 4/5] configs: rk3328: add support for pmic rk8xx and regulator and i2c driver
Philipp Tomsich
- [U-Boot] [U-Boot, 5/5] rockchip: dts: rk3328-evb: add i2c1 and rk805 nodes
Philipp Tomsich
- [U-Boot] [U-Boot, 8/8] arm: dts: rv1108: Add Saradc node at dtsi level
Philipp Tomsich
- [U-Boot] [U-Boot,2/5] power: pmic: rk816: support rk816 pmic
Philipp Tomsich
- [U-Boot] [U-Boot,3/5] power: pmic: rk805: support rk805 pmic
Philipp Tomsich
- [U-Boot] [U-Boot,1/8] adc: Add driver for Rockchip Saradc
Philipp Tomsich
- [U-Boot] [U-Boot, 6/8] clk: rockchip: Add rk3368 Saradc clock support
Philipp Tomsich
- [U-Boot] [U-Boot, 7/8] clk: rockchip: Add rk3399 Saradc clock support
Philipp Tomsich
- [U-Boot] [U-Boot, 5/8] clk: rockchip: Add rk3328 Saradc clock support
Philipp Tomsich
- [U-Boot] [U-Boot, 3/8] clk: rockchip: Add rv1108 Saradc clock support
Philipp Tomsich
- [U-Boot] [PATCH 0/3] rockchip: back-to-bootrom: replace assembly-implementation with C-code
Philipp Tomsich
- [U-Boot] [PATCH 1/3] arm: make save_boot_params_ret prototype visible for AArch64
Philipp Tomsich
- [U-Boot] [PATCH 2/3] rockchip: back-to-bootrom: replace assembly-implementation with C-code
Philipp Tomsich
- [U-Boot] [PATCH 3/3] rockchip: back-to-bootrom: allow passing a cmd to the bootrom
Philipp Tomsich
- [U-Boot] [PATCH] rockchip: board: lion-rk3368: avoid ATF overwriting active SPL stage
Philipp Tomsich
- [U-Boot] [PATCH v2 0/5] rockchip: back-to-bootrom: replace assembly-implementation with C-code
Philipp Tomsich
- [U-Boot] [PATCH v2 1/5] arm: make save_boot_params_ret prototype visible for AArch64
Philipp Tomsich
- [U-Boot] [PATCH v2 2/5] rockchip: back-to-bootrom: replace assembly-implementation with C-code
Philipp Tomsich
- [U-Boot] [PATCH v2 3/5] rockchip: back-to-bootrom: rk3188: chain from SPL via TPL to the BROM
Philipp Tomsich
- [U-Boot] [PATCH v2 4/5] rockchip: back-to-bootrom: allow passing a cmd to the bootrom
Philipp Tomsich
- [U-Boot] [PATCH v2 5/5] rockchip: back-to-bootrom: do not compile bootrom.o in thumb mode
Philipp Tomsich
- [U-Boot] rockchip: puma_rk3399: increase serialno_str size
Philipp Tomsich
- [U-Boot] [U-Boot, 1/2] rockchip: sdhci: update reg map for of-platdata
Philipp Tomsich
- [U-Boot] [U-Boot, 2/2] rockchip: ram: rk3399: update reg map for of-platdata
Philipp Tomsich
- [U-Boot] rockchip: puma_rk3399: increase serialno_str size
Philipp Tomsich
- [U-Boot] [U-Boot, RFC, 2/4] rockchip: timer: update for 32/64bit-aware OF_PLATDATA
Philipp Tomsich
- [U-Boot] [U-Boot, 4/4] rockchip: dts: rk3368: reduce the number of nodes seen in TPL
Philipp Tomsich
- [U-Boot] [U-Boot, 1/2] rockchip: sdhci: update reg map for of-platdata
Philipp Tomsich
- [U-Boot] [U-Boot, 2/2] rockchip: ram: rk3399: update reg map for of-platdata
Philipp Tomsich
- [U-Boot] rockchip: puma_rk3399: increase serialno_str size
Philipp Tomsich
- [U-Boot] [U-Boot, RFC, 3/4] rockchip: rk3368: adjust DMC driver for 32/64bit-aware OF_PLATDATA
Philipp Tomsich
- [U-Boot] [PATCH] rockchip: pinctrl: rk3368: add pinctrl for SDMMC0
Philipp Tomsich
- [U-Boot] [U-Boot, v3, 09/14] rockchip: dts: Enable SARADC for rv1108-evb
Philipp Tomsich
- [U-Boot] [U-Boot, v3, 10/14] rockchip: dts: Enable SARADC for rk3288-popmetal
Philipp Tomsich
- [U-Boot] [U-Boot, v3, 11/14] rockchip: dts: Enable SARADC for rk3328-evb
Philipp Tomsich
- [U-Boot] [U-Boot, v3, 12/14] rockchip: dts: Enable SARADC for rk3368-px5-evb
Philipp Tomsich
- [U-Boot] [U-Boot, v3, 13/14] rockchip: dts: Enable SARADC for rk3368-sheep
Philipp Tomsich
- [U-Boot] [U-Boot, v3, 14/14] rockchip: dts: Enable SARADC for rk3399-evb
Philipp Tomsich
- [U-Boot] [U-Boot, v3, 09/14] rockchip: dts: Enable SARADC for rv1108-evb
Philipp Tomsich
- [U-Boot] [U-Boot, v3, 10/14] rockchip: dts: Enable SARADC for rk3288-popmetal
Philipp Tomsich
- [U-Boot] [U-Boot, v3, 11/14] rockchip: dts: Enable SARADC for rk3328-evb
Philipp Tomsich
- [U-Boot] [U-Boot, v3, 12/14] rockchip: dts: Enable SARADC for rk3368-px5-evb
Philipp Tomsich
- [U-Boot] [U-Boot, v3, 13/14] rockchip: dts: Enable SARADC for rk3368-sheep
Philipp Tomsich
- [U-Boot] [U-Boot, v3, 14/14] rockchip: dts: Enable SARADC for rk3399-evb
Philipp Tomsich
- [U-Boot] [U-Boot, v3, 01/14] dm: adc: Add driver for Rockchip SARADC
Philipp Tomsich
- [U-Boot] [U-Boot, v3, 03/14] rockchip: clk: Add rv1108 SARADC clock support
Philipp Tomsich
- [U-Boot] [U-Boot, v3, 04/14] rockchip: clk: Add SARADC clock support for rk3288
Philipp Tomsich
- [U-Boot] [U-Boot, v3, 05/14] rockchip: clk: Add rk3328 SARADC clock support
Philipp Tomsich
- [U-Boot] [U-Boot, v3, 06/14] rockchip: clk: Add rk3368 SARADC clock support
Philipp Tomsich
- [U-Boot] [U-Boot, v3, 07/14] rockchip: clk: Add rk3399 SARADC clock support
Philipp Tomsich
- [U-Boot] [U-Boot, v3, 08/14] rockchip: dts: rv1108: Add SARADC node at dtsi level
Philipp Tomsich
- [U-Boot] [U-Boot, v3, 09/14] rockchip: dts: Enable SARADC for rv1108-evb
Philipp Tomsich
- [U-Boot] [U-Boot, v3, 10/14] rockchip: dts: Enable SARADC for rk3288-popmetal
Philipp Tomsich
- [U-Boot] [U-Boot, v3, 11/14] rockchip: dts: Enable SARADC for rk3328-evb
Philipp Tomsich
- [U-Boot] [U-Boot, v3, 12/14] rockchip: dts: Enable SARADC for rk3368-px5-evb
Philipp Tomsich
- [U-Boot] [U-Boot, v3, 13/14] rockchip: dts: Enable SARADC for rk3368-sheep
Philipp Tomsich
- [U-Boot] [U-Boot, v3, 14/14] rockchip: dts: Enable SARADC for rk3399-evb
Philipp Tomsich
- [U-Boot] [PATCH] rockchip: imply ADC and SARADC_ROCKCHIP on supported SoCs
Philipp Tomsich
- [U-Boot] [U-Boot, v3, 02/14] rockchip: configs: Enable the ROCKCHIP_SARADC config
Philipp Tomsich
- [U-Boot] [PATCH v3 0/6] rockchip: back-to-bootrom: replace assembly-implementation with C-code
Philipp Tomsich
- [U-Boot] [PATCH v3 1/6] arm: make save_boot_params_ret prototype visible for AArch64
Philipp Tomsich
- [U-Boot] [PATCH v3 2/6] arm: mark save_boot_params_ret as a function
Philipp Tomsich
- [U-Boot] [PATCH v3 3/6] arm: provide a PCS-compliant setjmp implementation
Philipp Tomsich
- [U-Boot] [PATCH v3 4/6] rockchip: back-to-bootrom: replace assembly-implementation with C-code
Philipp Tomsich
- [U-Boot] [PATCH v3 5/6] rockchip: back-to-bootrom: rk3188: chain from SPL via TPL to the BROM
Philipp Tomsich
- [U-Boot] [PATCH v3 6/6] rockchip: back-to-bootrom: allow passing a cmd to the bootrom
Philipp Tomsich
- [U-Boot] rockchip: rk3188: ram: add support for 16bit row address
Philipp Tomsich
- [U-Boot] [U-Boot, v4, 2/2] rockchip: dts: rk3229: remove dram channel info
Philipp Tomsich
- [U-Boot] [U-Boot, 6/6] rockchip: gmac_rockchip: Add gmac support for rv1108
Philipp Tomsich
- [U-Boot] [U-Boot, 5/6] net: gmac_rockchip: Use the proerty of "clock_in_out" to set mac clock
Philipp Tomsich
- [U-Boot] [U-Boot, 4/6] net: gmac_rockchip: Define the gmac grf register struct at gmac_rockchip.c
Philipp Tomsich
- [U-Boot] [U-Boot, 3/6] rockchip: configs: Enable CONFIG_NET_RANDOM_ETHADDR for rk3288-evb
Philipp Tomsich
- [U-Boot] [U-Boot, 2/6] rockchip: dts: rk3399-evb: Change the tx/rx delay value for transmission quality
Philipp Tomsich
- [U-Boot] [U-Boot, 1/6] rockchip: clk: Add mac clock set for rk3399
Philipp Tomsich
- [U-Boot] rockchip: rk3188: ram: add support for 16bit row address
Philipp Tomsich
- [U-Boot] [U-Boot, v4, 2/2] rockchip: dts: rk3229: remove dram channel info
Philipp Tomsich
- [U-Boot] rockchip: rk3188: ram: add support for 16bit row address
Philipp Tomsich
- [U-Boot] [U-Boot, v2, 1/4] rockchip: rk3399: move sdram driver to driver/ram
Philipp Tomsich
- [U-Boot] [U-Boot, v2, 2/4] rockchip: rk3188: move sdram driver to driver/ram
Philipp Tomsich
- [U-Boot] [U-Boot, v2, 3/4] rockchip: rk3288: move sdram driver to driver/ram
Philipp Tomsich
- [U-Boot] [U-Boot, v2, 4/4] rockchip: rk3328: move sdram driver to driver/ram
Philipp Tomsich
- [U-Boot] [U-Boot,v4,1/2] rockchip: rk322x: add sdram driver
Philipp Tomsich
- [U-Boot] [U-Boot, v4, 2/2] rockchip: dts: rk3229: remove dram channel info
Philipp Tomsich
- [U-Boot] rockchip: clk: fix typo in rk322x clock driver
Philipp Tomsich
- [U-Boot] rockchip: rk3036: fix grf macro define
Philipp Tomsich
- [U-Boot] rockchip: mkimage: add support for rk3128 soc
Philipp Tomsich
- [U-Boot] rockchip: clk: fix typo in rk322x clock driver
Philipp Tomsich
- [U-Boot] rockchip: rk3036: fix grf macro define
Philipp Tomsich
- [U-Boot] rockchip: mkimage: add support for rk3128 soc
Philipp Tomsich
- [U-Boot] rockchip: clk: fix typo in rk322x clock driver
Philipp Tomsich
- [U-Boot] rockchip: rk3036: fix grf macro define
Philipp Tomsich
- [U-Boot] rockchip: mkimage: add support for rk3128 soc
Philipp Tomsich
- [U-Boot] rockchip: rk3399: spl: convert to using BOOT_DEVICE_BOOTROM
Philipp Tomsich
- [U-Boot] [U-Boot, v2, 3/5] power: pmic: rk805: support rk805 pmic
Philipp Tomsich
- [U-Boot] [U-Boot,3/5] power: pmic: rk805: support rk805 pmic
Philipp Tomsich
- [U-Boot] [U-Boot, v2, 2/5] power: pmic: rk816: support rk816 pmic
Philipp Tomsich
- [U-Boot] [U-Boot,5/8] rockchip: rk3128: add sysreset driver
Philipp Tomsich
- [U-Boot] rockchip: rk322x: fix pd_bus hclk/pclk
Philipp Tomsich
- [U-Boot] [U-Boot, v2, 1/5] armv7: Move L2CTLR read/write to common
Philipp Tomsich
- [U-Boot] [U-Boot, v2, 2/5] armv7: rk3288: Move configure_l2ctlr to common
Philipp Tomsich
- [U-Boot] [U-Boot,v2,3/5] rk3288: vyasa: Add TPL support
Philipp Tomsich
- [U-Boot] [U-Boot, v2, 3/5] power: pmic: rk805: support rk805 pmic
Philipp Tomsich
- [U-Boot] [U-Boot, 1/1] evb-rk3399: avoid redefinition of CONFIG_ENV_OFFSET
Philipp Tomsich
- [U-Boot] rockchip: rk322x: fix pd_bus hclk/pclk
Philipp Tomsich
- [U-Boot] [U-Boot, v2, 1/5] armv7: Move L2CTLR read/write to common
Philipp Tomsich
- [U-Boot] [U-Boot, v2, 2/5] armv7: rk3288: Move configure_l2ctlr to common
Philipp Tomsich
- [U-Boot] [U-Boot, v2, 3/5] power: pmic: rk805: support rk805 pmic
Philipp Tomsich
- [U-Boot] [U-Boot, 1/1] evb-rk3399: avoid redefinition of CONFIG_ENV_OFFSET
Philipp Tomsich
- [U-Boot] rockchip: rk322x: fix pd_bus hclk/pclk
Philipp Tomsich
- [U-Boot] [U-Boot, v2, 1/5] armv7: Move L2CTLR read/write to common
Philipp Tomsich
- [U-Boot] [U-Boot, v2, 2/5] armv7: rk3288: Move configure_l2ctlr to common
Philipp Tomsich
- [U-Boot] [U-Boot,v2,3/5] rk3288: vyasa: Add TPL support
Philipp Tomsich
- [U-Boot] [U-Boot, v2, 4/5] rk3288: vyasa: Add falcon mode support
Philipp Tomsich
- [U-Boot] rockchip: board: lion-rk3368: avoid ATF overwriting active SPL stage
Philipp Tomsich
- [U-Boot] rockchip: pinctrl: rk3368: add pinctrl for SDMMC0
Philipp Tomsich
- [U-Boot] [U-Boot, v2, 1/5] rockchip: i2c: rk3328: support i2c for rk3328 SoC
Philipp Tomsich
- [U-Boot] [U-Boot, v2, 4/5] configs: rk3328: add support for pmic rk8xx and regulator and i2c driver
Philipp Tomsich
- [U-Boot] [U-Boot, v2, 5/5] rockchip: dts: rk3328-evb: add i2c1 and rk805 nodes
Philipp Tomsich
- [U-Boot] [U-Boot, v2, 2/4] rockchip: rk322x: update the sysreg number for boot mode
Philipp Tomsich
- [U-Boot] [U-Boot, 1/1] evb-rk3399: avoid redefinition of CONFIG_ENV_OFFSET
Philipp Tomsich
- [U-Boot] [PATCH v2 00/10] rockchip: puma-rk3399: support 'same-as-spl' for boot-order and always power-up eMMC/SPI
Philipp Tomsich
- [U-Boot] [PATCH v2 01/10] rockchip: rk3399: make spl_board_init board-specific
Philipp Tomsich
- [U-Boot] [PATCH v2 02/10] rockchip: bootrom: add definitions to retrieve BROM boot-source
Philipp Tomsich
- [U-Boot] [PATCH v2 03/10] rockchip: spl: add documentation for spl_node_to_boot_device()
Philipp Tomsich
- [U-Boot] [PATCH v2 04/10] rockchip: spl: support a 'same-as-spl'-specifier in the spl-boot-order
Philipp Tomsich
- [U-Boot] [PATCH v2 05/10] rockchip: spl: rk3399: implement chip-specific board_spl_was_booted_from()
Philipp Tomsich
- [U-Boot] [PATCH v2 06/10] rockchip: dts: rk3399-puma: add 'same-as-spl' to the front of the boot-order
Philipp Tomsich
- [U-Boot] [PATCH v2 07/10] rockchip: puma-rk3399: update board_init()
Philipp Tomsich
- [U-Boot] [PATCH v2 08/10] rockchip: rk3399-puma: add boot-on regulator to override BIOS_DISABLE
Philipp Tomsich
- [U-Boot] [PATCH v2 09/10] power: spl: add SPL_DM_REGULATOR_FIXED in Kconfig
Philipp Tomsich
- [U-Boot] [PATCH v2 10/10] rockchip: defconfig: puma-rk3399: update for DM_REGULATOR support in SPL
Philipp Tomsich
- [U-Boot] [U-Boot, v2, 01/10] rockchip: rk3399: make spl_board_init board-specific
Philipp Tomsich
- [U-Boot] [U-Boot, v2, 02/10] rockchip: bootrom: add definitions to retrieve BROM boot-source
Philipp Tomsich
- [U-Boot] [U-Boot, v2, 03/10] rockchip: spl: add documentation for spl_node_to_boot_device()
Philipp Tomsich
- [U-Boot] [U-Boot, v2, 04/10] rockchip: spl: support a 'same-as-spl'-specifier in the spl-boot-order
Philipp Tomsich
- [U-Boot] [U-Boot, v2, 05/10] rockchip: spl: rk3399: implement chip-specific board_spl_was_booted_from()
Philipp Tomsich
- [U-Boot] [U-Boot, v2, 06/10] rockchip: dts: rk3399-puma: add 'same-as-spl' to the front of the boot-order
Philipp Tomsich
- [U-Boot] [U-Boot, v2, 07/10] rockchip: puma-rk3399: update board_init()
Philipp Tomsich
- [U-Boot] [U-Boot, v2, 08/10] rockchip: rk3399-puma: add boot-on regulator to override BIOS_DISABLE
Philipp Tomsich
- [U-Boot] [U-Boot, v2, 09/10] power: spl: add SPL_DM_REGULATOR_FIXED in Kconfig
Philipp Tomsich
- [U-Boot] [U-Boot, v2, 10/10] rockchip: defconfig: puma-rk3399: update for DM_REGULATOR support in SPL
Philipp Tomsich
- [U-Boot] [U-Boot,1/8] rockchip: rk3128: add device tree file
Philipp Tomsich
- [U-Boot] rockchip: enable TPL_SYSRESET for all rockchip SoCs
Philipp Tomsich
- [U-Boot] [U-Boot,v2,5/5] rk3288: spl: Add dram_init_banksize
Philipp Tomsich
- [U-Boot] rockchip: enable TPL_SYSRESET for all rockchip SoCs
Philipp Tomsich
- [U-Boot] [PATCH v2 09/14] sunxi: imply USB_GADGET
Chen-Yu Tsai
- [U-Boot] Disable axp209 auto start
Chen-Yu Tsai
- [U-Boot] [PATCH 0/9] sunxi: A83T improvements
Chen-Yu Tsai
- [U-Boot] [PATCH 1/9] sunxi: rename Bananapi M3 dts file name
Chen-Yu Tsai
- [U-Boot] [PATCH 2/9] sunxi: Enable eMMC on Cubietruck Plus
Chen-Yu Tsai
- [U-Boot] [PATCH 3/9] sunxi: Fix USB PHY control register offset for A83T
Chen-Yu Tsai
- [U-Boot] [PATCH 4/9] sunxi: Switch MUSB to gadget mode on the Bananapi M3
Chen-Yu Tsai
- [U-Boot] [PATCH 5/9] sunxi: Switch MUSB to gadget mode on the Cubietruck Plus
Chen-Yu Tsai
- [U-Boot] [PATCH 6/9] net: sun8i_emac: Support RX/TX delay chains
Chen-Yu Tsai
- [U-Boot] [PATCH 7/9] net: sun8i_emac: Fix build for non-H3/H5 SoCs
Chen-Yu Tsai
- [U-Boot] [PATCH 8/9] sunxi: Enable EMAC on the Cubietruck Plus
Chen-Yu Tsai
- [U-Boot] [PATCH 9/9] sunxi: Enable EMAC on the Bananapi M3
Chen-Yu Tsai
- [U-Boot] [PATCH 4/9] sunxi: Switch MUSB to gadget mode on the Bananapi M3
Chen-Yu Tsai
- [U-Boot] [PATCH 6/9] net: sun8i_emac: Support RX/TX delay chains
Chen-Yu Tsai
- [U-Boot] [PATCH 1/2] PCI: Add driver for a 'pci-host-ecam-generic' host controller
Tuomas Tynkkynen
- [U-Boot] [PATCH 1/5] pci: xilinx: Fix doc comments on config space accessors
Tuomas Tynkkynen
- [U-Boot] [PATCH 2/5] pci: xilinx: Remove unused field 'hose' from struct xilinx_pcie
Tuomas Tynkkynen
- [U-Boot] [PATCH 3/5] pci: tegra: Remove unused field 'hose' from struct tegra_pcie
Tuomas Tynkkynen
- [U-Boot] [PATCH 4/5] pci: layerscape: Remove unused field 'hose' from struct ls_pcie
Tuomas Tynkkynen
- [U-Boot] [PATCH 5/5] pci: Remove unnecessary 'default n' from Kconfig
Tuomas Tynkkynen
- [U-Boot] [ANN] U-Boot v2017.09-rc4 released
Tuomas Tynkkynen
- [U-Boot] [PATCH v2 0/6] Board for QEMU's '-machine virt' on ARM
Tuomas Tynkkynen
- [U-Boot] [PATCH v2 1/6] pci: Add helper for implementing memory-mapped config space accesses
Tuomas Tynkkynen
- [U-Boot] [PATCH v2 2/6] pci: xilinx: Use pci_generic_mmap_{read, write}_config()
Tuomas Tynkkynen
- [U-Boot] [PATCH v2 3/6] pci: layerscape: Use pci_generic_mmap_{read, write}_config
Tuomas Tynkkynen
- [U-Boot] [PATCH v2 4/6] PCI: Add driver for a 'pci-host-ecam-generic' host controller
Tuomas Tynkkynen
- [U-Boot] [PATCH v2 5/6] ARM: Add a new arch + board for QEMU's 'virt' machine
Tuomas Tynkkynen
- [U-Boot] [PATCH v2 6/6] travis.yml: Add job for running test.py in qemu_arm
Tuomas Tynkkynen
- [U-Boot] FAT filesystems and mtools-created filesystems
Tuomas Tynkkynen
- [U-Boot] [PATCH v2 5/6] ARM: Add a new arch + board for QEMU's 'virt' machine
Tuomas Tynkkynen
- [U-Boot] FAT filesystems and mtools-created filesystems
Tuomas Tynkkynen
- [U-Boot] [PATCH 1/3] fs-test: Add FAT16 support
Tuomas Tynkkynen
- [U-Boot] [PATCH 2/3] fs/fat: Fix pathnames using '..' that lead to the root directory
Tuomas Tynkkynen
- [U-Boot] [PATCH 3/3] fs-test: Add test for a filename using '..' to go back to the root
Tuomas Tynkkynen
- [U-Boot] [PATCH 3/3] fs-test: Add test for a filename using '..' to go back to the root
Tuomas Tynkkynen
- [U-Boot] [PATCH v2 1/4] fs/ext4: Fix group descriptor checksum calculation
Tuomas Tynkkynen
- [U-Boot] [PATCH v2 2/4] fs-test: Add FAT16 support
Tuomas Tynkkynen
- [U-Boot] [PATCH v2 3/4] fs/fat: Fix pathnames using '..' that lead to the root directory
Tuomas Tynkkynen
- [U-Boot] [PATCH v2 4/4] fs-test: Add test for a filename using '..' to go back to the root
Tuomas Tynkkynen
- [U-Boot] [PATCH] fs/fat: Fix 'CACHE: Misaligned operation at range' warnings
Tuomas Tynkkynen
- [U-Boot] [PATCH v2 1/4] fs/ext4: Fix group descriptor checksum calculation
Tuomas Tynkkynen
- [U-Boot] [PATCH v2 1/2] fs/fat: Fix 'CACHE: Misaligned operation at range' warnings
Tuomas Tynkkynen
- [U-Boot] [PATCH v2 2/2] fs/fat: Check malloc return values and fix memory leaks
Tuomas Tynkkynen
- [U-Boot] [PATCH 1/1] armv8: ls1012a: Memory Map modification of kernel, env
Bhaskar Upadhaya
- [U-Boot] [PATCH 1/1] usb: gadget: g_dnl: Use serial# variable to set g_dnl_serial
Marek Vasut
- [U-Boot] [PATCH 1/1] usb: gadget: g_dnl: Use serial# variable to set g_dnl_serial
Marek Vasut
- [U-Boot] [PATCH] ARM: socfpga: remove unneeded NAND config options
Marek Vasut
- [U-Boot] [PATCH] ARM: socfpga: remove unneeded NAND config options
Marek Vasut
- [U-Boot] [PATCH 03/19] arm: socfpga: Add driver for flash to program FPGA
Marek Vasut
- [U-Boot] [PATCH 07/19] arm: socfpga: Add DRAM bank size initialization function
Marek Vasut
- [U-Boot] [PATCH 03/19] arm: socfpga: Add driver for flash to program FPGA
Marek Vasut
- [U-Boot] [PATCH 03/19] arm: socfpga: Add driver for flash to program FPGA
Marek Vasut
- [U-Boot] [PATCH] ARM: rmobile: Fix SD divider settings on Gen3
Marek Vasut
- [U-Boot] [PATCH v3 1/1] usb: gadget: g_dnl: Sync internal SN variable with env
Marek Vasut
- [U-Boot] [PATCH 03/19] arm: socfpga: Add driver for flash to program FPGA
Marek Vasut
- [U-Boot] [PATCH] ARM: rmobile: Disable CONFIG_ARCH_FIXUP_FDT_MEMORY
Marek Vasut
- [U-Boot] [U-Boot, v4, 3/4] usb: dwc3: add support for 16 bit UTMI+ interface
Marek Vasut
- [U-Boot] [PATCH] ARM: socfpga: fix duplicate const specifier warning
Marek Vasut
- [U-Boot] [PATCH] ARM: socfpga: fix duplicate const specifier warning
Marek Vasut
- [U-Boot] [PATCH V3 1/5] mmc: uniphier-sd: Factor out register IO
Marek Vasut
- [U-Boot] [PATCH 1/6] ARM: rmobile: dts: Add EHCI USB nodes to r8a7796
Marek Vasut
- [U-Boot] [PATCH 2/6] ARM: rmobile: Move HSUSB configuration to board on Salvator-X
Marek Vasut
- [U-Boot] [PATCH 3/6] ARM: rmobile: Move HSUSB configuration to board on ULCB
Marek Vasut
- [U-Boot] [PATCH 4/6] ARM: rmobile: Enable EHCI generic on Salvator-X
Marek Vasut
- [U-Boot] [PATCH 5/6] ARM: rmobile: Enable EHCI generic on ULCB
Marek Vasut
- [U-Boot] [PATCH 6/6] usb: Drop the EHCI RCar Gen3
Marek Vasut
- [U-Boot] [PATCH] ARM: rmobile: Move CONFIG_CMD_ from rcar-gen3-common to configs
Marek Vasut
- [U-Boot] [PATCH] mtd: cfi: Zap cfi_flash_base in DM case
Marek Vasut
- [U-Boot] [PATCH] mtd: cfi: Add support for status register polling
Marek Vasut
- [U-Boot] [PATCH] ARM: socfpga: fix duplicate const specifier warning
Marek Vasut
- [U-Boot] [PATCH] ARM: dts: rmobile: Update DTS to match Linux 4.13
Marek Vasut
- [U-Boot] [PATCH] usb: xhci: Set number of event segments and entries to 1
Marek Vasut
- [U-Boot] [PATCH] ARM: rmobile: dts: Add XHCI USB node to r8a7796
Marek Vasut
- [U-Boot] [PATCH 00/22] mmc: Add support for HS200 and UHS modes
Marek Vasut
- [U-Boot] [RESEND PATCH 0/6] rockchip: enable live tree on the RK3399 and validate on the RK3399-Q7
Marek Vasut
- [U-Boot] [PATCH] usb: kbd: Set a default polling mechanism for USB keyboard
Marek Vasut
- [U-Boot] [PATCH] usb: kbd: Set a default polling mechanism for USB keyboard
Marek Vasut
- [U-Boot] [RESEND PATCH 0/6] rockchip: enable live tree on the RK3399 and validate on the RK3399-Q7
Marek Vasut
- [U-Boot] [RESEND PATCH 0/6] rockchip: enable live tree on the RK3399 and validate on the RK3399-Q7
Marek Vasut
- [U-Boot] [RESEND PATCH 0/6] rockchip: enable live tree on the RK3399 and validate on the RK3399-Q7
Marek Vasut
- [U-Boot] [PATCH] usb: kbd: Set a default polling mechanism for USB keyboard
Marek Vasut
- [U-Boot] [GIT] Pull request: u-boot-dfu
Marek Vasut
- [U-Boot] [PATCH] u-boot: Upgrade to 2017.09
Marek Vasut
- [U-Boot] [PATCH] u-boot: Upgrade to 2017.09
Marek Vasut
- [U-Boot] [PATCH] nios2: 10m50: Add CPU pre-relocation in device tree
Marek Vasut
- [U-Boot] [PATCH] u-boot: Upgrade to 2017.09
Marek Vasut
- [U-Boot] [PATCH] sf: Fix S25FL116K entry
Marek Vasut
- [U-Boot] [PATCH] ARM: rmobile: Place initial stack right below U-Boot
Marek Vasut
- [U-Boot] [PATCH] clk: rmobile: Add support for setting SDxCKCR
Marek Vasut
- [U-Boot] [PATCH] clk: rmobile: Add RPC hyperflash clock
Marek Vasut
- [U-Boot] [PATCH] mmc: uniphier-sd: Add vqmmc regulator support
Marek Vasut
- [U-Boot] [PATCH] net: ravb: Add PHY reset GPIO support
Marek Vasut
- [U-Boot] [PATCH] serial: sh: Enable clock if available
Marek Vasut
- [U-Boot] [PATCH] ARM: dts: rmobile: Add PHY reset GPIO
Marek Vasut
- [U-Boot] [PATCH 1/3] ARM: rmobile: Remove SD clock configuration from board files
Marek Vasut
- [U-Boot] [PATCH 2/3] ARM: rmobile: Remove AVB clock configuration from board files
Marek Vasut
- [U-Boot] [PATCH 3/3] ARM: rmobile: Remove SCIF clock configuration from board files
Marek Vasut
- [U-Boot] [PATCH] ARM: rmobile: Enable DM regulator support
Marek Vasut
- [U-Boot] [PATCH] ARM: rmobile: Enable GPIO command
Marek Vasut
- [U-Boot] [PATCH 1/5] pinctrl: rmobile: Add Renesas RCar pincontrol driver
Marek Vasut
- [U-Boot] [PATCH 2/5] gpio: rmobile: Add Renesas RCar GPIO driver
Marek Vasut
- [U-Boot] [PATCH 3/5] ARM: rmobile: Switch to DM PFC pinmux and GPIO driver
Marek Vasut
- [U-Boot] [PATCH 4/5] ARM: rmobile: Zap ad-hoc PFC and GPIO setup in board files
Marek Vasut
- [U-Boot] [PATCH 5/5] ARM: rmobile: Zap Gen3 PFC tables
Marek Vasut
- [U-Boot] [PATCH 00/22] mmc: Add support for HS200 and UHS modes
Marek Vasut
- [U-Boot] [OE-core] [PATCH] u-boot: Upgrade to 2017.09
Marek Vasut
- [U-Boot] [OE-core] [PATCH] u-boot: Upgrade to 2017.09
Marek Vasut
- [U-Boot] [PATCH 00/14] usb: xhci: Add interrupt transfer support and full speed device support
Marek Vasut
- [U-Boot] [PATCH 00/14] usb: xhci: Add interrupt transfer support and full speed device support
Marek Vasut
- [U-Boot] [OE-core] [PATCH] u-boot: Upgrade to 2017.09
Marek Vasut
- [U-Boot] [PATCH 01/14] arm: socfpga: stratix10: Add base address map for Statix10 SoC
Marek Vasut
- [U-Boot] [PATCH V3 1/5] mmc: uniphier-sd: Factor out register IO
Marek Vasut
- [U-Boot] [U-Boot,v10,04/10] usb: phy: Add STi USB2 PHY
Marek Vasut
- [U-Boot] [PATCH] drivers: pci: imx: add imx_pcie_remove function
Marek Vasut
- [U-Boot] [OE-core] [PATCH] u-boot: Upgrade to 2017.09
Marek Vasut
- [U-Boot] [OE-core] [PATCH] u-boot: Upgrade to 2017.09
Marek Vasut
- [U-Boot] Makefile: Update minimum dtc version to 1.4.3
Marek Vasut
- [U-Boot] Makefile: Update minimum dtc version to 1.4.3
Marek Vasut
- [U-Boot] [PULL] u-boot-usb/master
Marek Vasut
- [U-Boot] [PULL] u-boot-socfpga/master
Marek Vasut
- [U-Boot] [PULL] u-boot-usb/master
Marek Vasut
- [U-Boot] Makefile: Update minimum dtc version to 1.4.3
Marek Vasut
- [U-Boot] Makefile: Update minimum dtc version to 1.4.3
Marek Vasut
- [U-Boot] Makefile: Update minimum dtc version to 1.4.3
Marek Vasut
- [U-Boot] [PULL] u-boot-usb/master
Marek Vasut
- [U-Boot] Makefile: Update minimum dtc version to 1.4.3
Marek Vasut
- [U-Boot] Makefile: Update minimum dtc version to 1.4.3
Marek Vasut
- [U-Boot] Makefile: Update minimum dtc version to 1.4.3
Marek Vasut
- [U-Boot] [PATCH 0/5] Follow the Linux Kernel in building dtc as needed
Marek Vasut
- [U-Boot] [PATCH 0/5] Follow the Linux Kernel in building dtc as needed
Marek Vasut
- [U-Boot] Makefile: Update minimum dtc version to 1.4.3
Marek Vasut
- [U-Boot] [PATCH v2 01/19] ARM: socfpga: add bindings doc for arria10 fpga manager
Marek Vasut
- [U-Boot] [PATCH v2 02/19] doc: dtbinding: Description on FPGA RBF properties at Arria 10 FPGA manager
Marek Vasut
- [U-Boot] [PATCH v2 02/19] doc: dtbinding: Description on FPGA RBF properties at Arria 10 FPGA manager
Marek Vasut
- [U-Boot] [PATCH v2 04/19] arm: socfpga: Add Arria 10 SoCFPGA programming interface
Marek Vasut
- [U-Boot] [PATCH v2 05/19] arm: socfpga: Enhance FPGA program write rbf data with size >= 4 bytes
Marek Vasut
- [U-Boot] [PATCH v2 07/19] fdt: Add compatible strings for Arria 10
Marek Vasut
- [U-Boot] [PATCH v2 08/19] fs: Enable generic filesystems interface support in SPL.
Marek Vasut
- [U-Boot] [PATCH v2 09/19] arm: socfpga: Add drivers for programing FPGA from flash
Marek Vasut
- [U-Boot] [PATCH v2 10/19] arm: socfpga: Rename the gen5 sdram driver to more specific name
Marek Vasut
- [U-Boot] [PATCH v2 11/19] arm: socfpga: Add DRAM bank size initialization function
Marek Vasut
- [U-Boot] [PATCH v2 12/19] arm: socfpga: Add DDR driver for Arria 10
Marek Vasut
- [U-Boot] [PATCH v2 14/19] arm: socfpga: Enable build for DDR Arria 10
Marek Vasut
- [U-Boot] [PATCH v2 15/19] arm: socfpga: Add support to memory allocation in SPL
Marek Vasut
- [U-Boot] [PATCH v2 16/19] arm: socfpga: Enhance Intel SoCFPGA program header to support Arria 10
Marek Vasut
- [U-Boot] [PATCH v2 17/19] arm: socfpga: Adding clock frequency info for U-boot
Marek Vasut
- [U-Boot] [PATCH v2 19/19] arm: socfpga: Enable SPL loading U-boot to DDR and booting U-boot
Marek Vasut
- [U-Boot] [PATCH] drivers: pci: imx: add imx_pcie_remove function
Marek Vasut
- [U-Boot] [PATCH v2 5/7] armv8: layerscape: Eanble falcon boot
Marek Vasut
- [U-Boot] u-boot-usb/master sandbox unit test failure
Marek Vasut
- [U-Boot] [PULL] u-boot-usb/master
Marek Vasut
- [U-Boot] [PATCH] mmc: uniphier-sd: Add vqmmc regulator support
Marek Vasut
- [U-Boot] [PATCH 1/2] pinctrl: rmobile: Add Renesas RCar pincontrol driver
Marek Vasut
- [U-Boot] [PATCH 2/2] ARM: rmobile: Enable pinconf
Marek Vasut
- [U-Boot] [PATCH v2 02/19] doc: dtbinding: Description on FPGA RBF properties at Arria 10 FPGA manager
Marek Vasut
- [U-Boot] [PATCH v2 09/19] arm: socfpga: Add drivers for programing FPGA from flash
Marek Vasut
- [U-Boot] [PATCH v2 10/19] arm: socfpga: Rename the gen5 sdram driver to more specific name
Marek Vasut
- [U-Boot] [PATCH v2 11/19] arm: socfpga: Add DRAM bank size initialization function
Marek Vasut
- [U-Boot] [PATCH v2 12/19] arm: socfpga: Add DDR driver for Arria 10
Marek Vasut
- [U-Boot] [PATCH v2 15/19] arm: socfpga: Add support to memory allocation in SPL
Marek Vasut
- [U-Boot] [PATCH v2 16/19] arm: socfpga: Enhance Intel SoCFPGA program header to support Arria 10
Marek Vasut
- [U-Boot] [PATCH v2 19/19] arm: socfpga: Enable SPL loading U-boot to DDR and booting U-boot
Marek Vasut
- [U-Boot] [PATCH v2 09/19] arm: socfpga: Add drivers for programing FPGA from flash
Marek Vasut
- [U-Boot] [PATCH] mmc: uniphier-sd: Update the file to match V3 patchset
Marek Vasut
- [U-Boot] [PATCH] ARM: rmobile: Switch to UniPhier SD driver on Gen3
Marek Vasut
- [U-Boot] [PATCH 1/6] ARM: rmobile: dts: Add EHCI USB nodes to r8a7796
Marek Vasut
- [U-Boot] [PATCH 2/6] ARM: rmobile: Move HSUSB configuration to board on Salvator-X
Marek Vasut
- [U-Boot] [PATCH 3/6] ARM: rmobile: Move HSUSB configuration to board on ULCB
Marek Vasut
- [U-Boot] [PATCH 4/6] ARM: rmobile: Enable EHCI generic on Salvator-X
Marek Vasut
- [U-Boot] [PATCH 5/6] ARM: rmobile: Enable EHCI generic on ULCB
Marek Vasut
- [U-Boot] [PATCH 6/6] usb: Drop the EHCI RCar Gen3
Marek Vasut
- [U-Boot] [PATCH] ARM: rmobile: Move CONFIG_CMD_ from rcar-gen3-common to configs
Marek Vasut
- [U-Boot] [PATCH v2 02/19] doc: dtbinding: Description on FPGA RBF properties at Arria 10 FPGA manager
Marek Vasut
- [U-Boot] [PATCH v2 09/19] arm: socfpga: Add drivers for programing FPGA from flash
Marek Vasut
- [U-Boot] [PATCH v2 15/19] arm: socfpga: Add support to memory allocation in SPL
Marek Vasut
- [U-Boot] [PATCH v2 16/19] arm: socfpga: Enhance Intel SoCFPGA program header to support Arria 10
Marek Vasut
- [U-Boot] [PATCH v2 09/19] arm: socfpga: Add drivers for programing FPGA from flash
Marek Vasut
- [U-Boot] [PULL] u-boot-usb/master
Marek Vasut
- [U-Boot] [PATCH] mmc: uniphier-sd: Add vqmmc regulator support
Marek Vasut
- [U-Boot] [PATCH] mmc: uniphier-sd: Add vqmmc regulator support
Marek Vasut
- [U-Boot] [PATCH 1/2] pinctrl: rmobile: Add Renesas RCar pincontrol driver
Marek Vasut
- [U-Boot] [PATCH V2 1/2] pinctrl: rmobile: Add pinconf to Renesas RCar pincontrol driver
Marek Vasut
- [U-Boot] [PATCH 2/2] ARM: rmobile: Enable pinconf
Marek Vasut
- [U-Boot] [U-Boot, 5/5] dm: usb: storage: Fix broken read/write when both EHCD and xHCD are enabled
Marek Vasut
- [U-Boot] [PATCH v2 09/19] arm: socfpga: Add drivers for programing FPGA from flash
Marek Vasut
- [U-Boot] [PATCH] usb: storage: Fix overwritten in usb_stor_set_max_xfer_blk()
Marek Vasut
- [U-Boot] [PATCH] usb: dwc3: add UniPhier specific glue layer
Marek Vasut
- [U-Boot] u-boot-usb/master sandbox unit test failure
Marek Vasut
- [U-Boot] [PATCH] usb: storage: Fix overwritten in usb_stor_set_max_xfer_blk()
Marek Vasut
- [U-Boot] [PATCH] usb: dwc3: add UniPhier specific glue layer
Marek Vasut
- [U-Boot] [PATCH] usb: storage: Fix overwritten in usb_stor_set_max_xfer_blk()
Marek Vasut
- [U-Boot] [PATCH] ARM: MV_EBU: Increase size of PCIe default mapping
VlaoMao
- [U-Boot] [PATCH] arm: mach-omap2: Relax checks on OP-TEE location to allow pageable image
Lokesh Vutla
- [U-Boot] [PATCH] arm: dts: Add missing u-boot specific dtsi for dra7-evm
Lokesh Vutla
- [U-Boot] [PATCH] xyz-modem: Fix timeout loop waiting with WATCHDOG
Lokesh Vutla
- [U-Boot] [PATCH] xyz-modem: Fix timeout loop waiting with WATCHDOG
Lokesh Vutla
- [U-Boot] [PATCH v2] xyz-modem: Fix timeout loop waiting with WATCHDOG
Lokesh Vutla
- [U-Boot] [PATCH] configs: keystone2: env: Fix burn_uboot_spi command
Lokesh Vutla
- [U-Boot] [PATCH] ARM: dts: OMAP5+: Enable all gpios in SPL
Lokesh Vutla
- [U-Boot] [PATCH] xyz-modem: Fix timeout loop waiting with WATCHDOG
Lokesh Vutla
- [U-Boot] [PATCH v5 1/9] armv8: Add scfg_clrsetbits_32(), scfg_clrbits_32()
Ran Wang
- [U-Boot] [PATCH v5 2/9] armv8: Add workaround for USB erratum A-009008
Ran Wang
- [U-Boot] [PATCH v5 3/9] armv8: Add workaround for USB erratum A-009798
Ran Wang
- [U-Boot] [PATCH v5 4/9] armv8: Add workaround for USB erratum A-008997
Ran Wang
- [U-Boot] [PATCH v5 5/9] armv8: Add workaround for USB erratum A-009007
Ran Wang
- [U-Boot] [PATCH v5 6/9] armv7: Add workaround for USB erratum A-009008
Ran Wang
- [U-Boot] [PATCH v5 7/9] armv7: Add workaround for USB erratum A-009798
Ran Wang
- [U-Boot] [PATCH v5 8/9] armv7: Add workaround for USB erratum A-008997
Ran Wang
- [U-Boot] [PATCH v5 9/9] armv7: Add workaround for USB erratum A-009007
Ran Wang
- [U-Boot] Compile failure encountered on latest (2017-07-20) git://git.denx.de/u-boot-usb.git branch master for target ls1021atwr_nor_defconfig
Ran Wang
- [U-Boot] [PATCH 2/2] ls1088aqds: Enable USB command on QDS for qspi-boot
Ran Wang
- [U-Boot] [PATCH v2 1/2] ls1088ardb: Enable USB command RDB qspi-boot
Ran Wang
- [U-Boot] [PATCH v2 2/2] ls1088aqds: Enable USB command on QDS for qspi-boot
Ran Wang
- [U-Boot] [PATCH] armv8: Apply workaround for USB erratum A-009007 to LS1088A
Ran Wang
- [U-Boot] [PATCH v2 1/2] ls1088ardb: Enable USB command RDB qspi-boot
Ran Wang
- [U-Boot] [PATCH 3/8] test/py: Import 'configparser' lower case to be python 3.x safe
Stephen Warren
- [U-Boot] [PATCH 8/8] test/py: vboot: Remove stderr redirect from openssl command
Stephen Warren
- [U-Boot] [U-Boot, 1/1] add pytests for 'gpt rename' and 'gpt swap'
Stephen Warren
- [U-Boot] [PATCH v3 11/14] dtbo: make dtbos special
Stephen Warren
- [U-Boot] [PATCH v3 11/14] dtbo: make dtbos special
Stephen Warren
- [U-Boot] [PATCH v3 11/14] dtbo: make dtbos special
Stephen Warren
- [U-Boot] [U-Boot, 1/1] add pytests for 'gpt rename' and 'gpt swap'
Stephen Warren
- [U-Boot] [PATCH] test/py: gpt: make use of infra-structure
Stephen Warren
- [U-Boot] [PATCH] Makefile: Update minimum dtc version to 1.4.3
Stephen Warren
- [U-Boot] [PATCH V2] test/py: gpt: make use of infra-structure
Stephen Warren
- [U-Boot] [PATCH] test/py: gpt: make use of infra-structure
Stephen Warren
- [U-Boot] [PATCH 1/3] test/py: Document required tools/packages
Stephen Warren
- [U-Boot] [PATCH 2/3] test/py: provide more information about test skip reason
Stephen Warren
- [U-Boot] [PATCH 3/3] test/py: add skip marker for reliance on tools
Stephen Warren
- [U-Boot] [PATCH 1/1] test/py: provide example scripts for integrating qemu
Stephen Warren
- [U-Boot] [PATCH] test/py: fix anchors in HTML status report
Stephen Warren
- [U-Boot] [PATCH 1/1] test/py: provide example scripts for integrating qemu
Stephen Warren
- [U-Boot] [PATCH 1/1] test/py: provide example scripts for integrating qemu
Stephen Warren
- [U-Boot] [PATCH 1/1] test/py: provide example scripts for integrating qemu
Stephen Warren
- [U-Boot] [PATCH 1/1] test/py: provide example scripts for integrating qemu
Stephen Warren
- [U-Boot] [PATCH v3 1/1] test/py: provide example scripts for integrating qemu
Stephen Warren
- [U-Boot] [PATCH] py: test_gpio: Add support for GPIO pytest
Stephen Warren
- [U-Boot] [PATCH v3 1/1] test/py: provide example scripts for integrating qemu
Stephen Warren
- [U-Boot] [PATCH] py: test_gpio: Add support for GPIO pytest
Stephen Warren
- [U-Boot] [U-Boot, v2, 4/8] test/py: Import StringIO from io module for python 3.x
Stephen Warren
- [U-Boot] u-boot-usb/master sandbox unit test failure
Stephen Warren
- [U-Boot] u-boot-usb/master sandbox unit test failure
Stephen Warren
- [U-Boot] u-boot-usb/master sandbox unit test failure
Stephen Warren
- [U-Boot] [UBOOT] [PATCH] cmd: usb: ignore block devices under mass storage device
Lothar Waßmann
- [U-Boot] video: ipu_common: fix build error
Lothar Waßmann
- [U-Boot] [PATCH] dm: video: Add basic ANSI escape sequence support
Lothar Waßmann
- [U-Boot] Bad URL for mailing list info in "Contacts" web page
Stefan Weil
- [U-Boot] [Bug] Installation of sources fails on case insensitive filesystems
Stefan Weil
- [U-Boot] [Bug] Installation of sources fails on case insensitive filesystems
Stefan Weil
- [U-Boot] [PATCHi v2] omap3: evm: Fixes for CONFIG_NAND, SPL_OS_BOOT, USB, and environment
Derald D. Woods
- [U-Boot] [PATCH v3] omap3: evm: Fixes for CONFIG_NAND, SPL_OS_BOOT, USB, and environment
Derald D. Woods
- [U-Boot] [PATCH 1/2] arm: dts: am3517_evm: Sync DTS files with Linux 4.13-RC5
Derald D. Woods
- [U-Boot] [PATCH 2/2] ARM: omap3: am3517-evm: Add device tree and DM support
Derald D. Woods
- [U-Boot] [PATCH 0/8] Add rockchip Saradc support
David Wu
- [U-Boot] [PATCH 1/8] adc: Add driver for Rockchip Saradc
David Wu
- [U-Boot] [PATCH 2/8] configs: rockchip: Enable the ROCKCHIP_SARADC config
David Wu
- [U-Boot] [PATCH 3/8] clk: rockchip: Add rv1108 Saradc clock support
David Wu
- [U-Boot] [PATCH 4/8] clk: rockchip: Add Saradc clock support for rk3288
David Wu
- [U-Boot] [PATCH 5/8] clk: rockchip: Add rk3328 Saradc clock support
David Wu
- [U-Boot] [PATCH 6/8] clk: rockchip: Add rk3368 Saradc clock support
David Wu
- [U-Boot] [PATCH 7/8] clk: rockchip: Add rk3399 Saradc clock support
David Wu
- [U-Boot] [PATCH 8/8] arm: dts: rv1108: Add Saradc node at dtsi level
David Wu
- [U-Boot] [U-Boot,v2,00/14] Add rockchip SARADC support
David Wu
- [U-Boot] [U-Boot,v2,01/14] adc: Add driver for Rockchip SARADC
David Wu
- [U-Boot] [U-Boot, v2, 02/14] configs: rockchip: Enable the ROCKCHIP_SARADC config
David Wu
- [U-Boot] [U-Boot, v2, 03/14] clk: rockchip: Add rv1108 SARADC clock support
David Wu
- [U-Boot] [U-Boot, v2, 04/14] clk: rockchip: Add SARADC clock support for rk3288
David Wu
- [U-Boot] [U-Boot, v2, 05/14] clk: rockchip: Add rk3328 SARADC clock support
David Wu
- [U-Boot] [U-Boot, v2, 06/14] clk: rockchip: Add rk3368 SARADC clock support
David Wu
- [U-Boot] [U-Boot, v2, 07/14] clk: rockchip: Add rk3399 SARADC clock support
David Wu
- [U-Boot] [U-Boot, v2, 08/14] arm: dts: rv1108: Add SARADC node at dtsi level
David Wu
- [U-Boot] [U-Boot,v2,09/14] arm: dts: Enable SARADC for rv1108-evb
David Wu
- [U-Boot] [U-Boot, v2, 10/14] arm: dts: Enable SARADC for rk3288-popmetal
David Wu
- [U-Boot] [U-Boot,v2,11/14] arm: dts: Enable SARADC for rk3328-evb
David Wu
- [U-Boot] [U-Boot, v2, 12/14] arm: dts: Enable SARADC for rk3368-px5-evb
David Wu
- [U-Boot] [U-Boot, v2, 13/14] arm: dts: Enable SARADC for rk3368-sheep
David Wu
- [U-Boot] [U-Boot,v2,14/14] arm: dts: Enable SARADC for rk3399-evb
David Wu
- [U-Boot] [PATCH v3 00/14] Add rockchip SARADC support
David Wu
- [U-Boot] [PATCH v3 01/14] dm: adc: Add driver for Rockchip SARADC
David Wu
- [U-Boot] [PATCH v3 02/14] rockchip: configs: Enable the ROCKCHIP_SARADC config
David Wu
- [U-Boot] [PATCH v3 03/14] rockchip: clk: Add rv1108 SARADC clock support
David Wu
- [U-Boot] [PATCH v3 04/14] rockchip: clk: Add SARADC clock support for rk3288
David Wu
- [U-Boot] [PATCH v3 05/14] rockchip: clk: Add rk3328 SARADC clock support
David Wu
- [U-Boot] [PATCH v3 06/14] rockchip: clk: Add rk3368 SARADC clock support
David Wu
- [U-Boot] [PATCH v3 07/14] rockchip: clk: Add rk3399 SARADC clock support
David Wu
- [U-Boot] [PATCH v3 08/14] rockchip: dts: rv1108: Add SARADC node at dtsi level
David Wu
- [U-Boot] [PATCH v3 09/14] rockchip: dts: Enable SARADC for rv1108-evb
David Wu
- [U-Boot] [PATCH v3 10/14] rockchip: dts: Enable SARADC for rk3288-popmetal
David Wu
- [U-Boot] [PATCH v3 11/14] rockchip: dts: Enable SARADC for rk3328-evb
David Wu
- [U-Boot] [PATCH v3 12/14] rockchip: dts: Enable SARADC for rk3368-px5-evb
David Wu
- [U-Boot] [PATCH v3 13/14] rockchip: dts: Enable SARADC for rk3368-sheep
David Wu
- [U-Boot] [PATCH v3 14/14] rockchip: dts: Enable SARADC for rk3399-evb
David Wu
- [U-Boot] [PATCH 0/6] Add gmac support for rk3399-evb and rv1108-evb
David Wu
- [U-Boot] [PATCH 1/6] rockchip: clk: Add mac clock set for rk3399
David Wu
- [U-Boot] [PATCH 2/6] rockchip: dts: rk3399-evb: Change the tx/rx delay value for transmission quality
David Wu
- [U-Boot] [PATCH 3/6] rockchip: configs: Enable CONFIG_NET_RANDOM_ETHADDR for rk3288-evb
David Wu
- [U-Boot] [PATCH 4/6] net: gmac_rockchip: Define the gmac grf register struct at gmac_rockchip.c
David Wu
- [U-Boot] [PATCH 5/6] net: gmac_rockchip: Use the proerty of "clock_in_out" to set mac clock
David Wu
- [U-Boot] [PATCH 6/6] rockchip: gmac_rockchip: Add gmac support for rv1108
David Wu
- [U-Boot] [PATCH] Powerpc: Make pcie link state judge more specific
Bao Xiaowei
- [U-Boot] [PATCH] ARM: socfpga: remove unneeded NAND config options
Masahiro Yamada
- [U-Boot] [PATCH] ARM: socfpga: remove unneeded NAND config options
Masahiro Yamada
- [U-Boot] [PATCH v2 1/5] kbuild: Enable -fshort-wchar
Masahiro Yamada
- [U-Boot] [PATCH] ARM: socfpga: fix duplicate const specifier warning
Masahiro Yamada
- [U-Boot] [PATCH] ARM: socfpga: fix duplicate const specifier warning
Masahiro Yamada
- [U-Boot] [PATCH] ARM: socfpga: fix duplicate const specifier warning
Masahiro Yamada
- [U-Boot] [PATCH] linux/kernel.h: import DIV_ROUND_{DOWN, UP}_ULL from Linux
Masahiro Yamada
- [U-Boot] [PATCH 0/6] Sync and consolidate Linux-derived printk, BUILD_BUG, BUG, WARN, etc.
Masahiro Yamada
- [U-Boot] [PATCH 1/6] printk: collect printk stuff into <linux/printk.h>
Masahiro Yamada
- [U-Boot] [PATCH 2/6] treewide: replace with error() with pr_err()
Masahiro Yamada
- [U-Boot] [PATCH 3/6] common.h: remove error()
Masahiro Yamada
- [U-Boot] [PATCH 4/6] vsprintf.h: include <linux/types.h>
Masahiro Yamada
- [U-Boot] [PATCH 5/6] bug.h: sync BUILD_BUG stuff with Linux 4.13
Masahiro Yamada
- [U-Boot] [PATCH 6/6] bug.h: move runtime BUG/WARN macros into <linux/bug.h>
Masahiro Yamada
- [U-Boot] [PATCH 0/6] Sync and consolidate Linux-derived printk, BUILD_BUG, BUG, WARN, etc.
Masahiro Yamada
- [U-Boot] [PATCH 1/4] mtd: nand: denali: allow to override corrupted revision register
Masahiro Yamada
- [U-Boot] [PATCH 2/4] ARM: uniphier: merge two defconfig files into uniphier_v7_defconfig
Masahiro Yamada
- [U-Boot] [PATCH 3/4] ARM: uniphier: remove bit field macros from sc64-regs.h
Masahiro Yamada
- [U-Boot] [PATCH 4/4] ARM: uniphier: add GPU(Mali) reset deassert and clk enable
Masahiro Yamada
- [U-Boot] [PATCH 1/2] mtd: nand: do not check R/B# for CMD_READID in nand_command(_lp)
Masahiro Yamada
- [U-Boot] [PATCH 2/2] mtd: nand: do not check R/B# for CMD_SET_FEATURES in nand_command(_lp)
Masahiro Yamada
- [U-Boot] [PATCH v2 0/8] Sync and consolidate Linux-derived printk, BUILD_BUG, BUG, WARN, etc.
Masahiro Yamada
- [U-Boot] [PATCH v2 1/8] stdio.h: move printf() stuff from <common.h> to <stdio.h>
Masahiro Yamada
- [U-Boot] [PATCH v2 2/8] printk: collect printk stuff into <linux/printk.h> with loglevel support
Masahiro Yamada
- [U-Boot] [PATCH v2 3/8] treewide: replace with error() with pr_err()
Masahiro Yamada
- [U-Boot] [PATCH v2 4/8] common.h: remove error()
Masahiro Yamada
- [U-Boot] [PATCH v2 5/8] vsprintf.h: include <linux/types.h>
Masahiro Yamada
- [U-Boot] [PATCH v2 6/8] bug.h: sync BUILD_BUG stuff with Linux 4.13
Masahiro Yamada
- [U-Boot] [PATCH v2 7/8] bug.h: move runtime BUG/WARN macros into <linux/bug.h>
Masahiro Yamada
- [U-Boot] [PATCH v2 8/8] dm: define dev_*() log functions in DM header
Masahiro Yamada
- [U-Boot] [PATCH 1/4] mtd: nand: denali: allow to override corrupted revision register
Masahiro Yamada
- [U-Boot] [GIT PULL] u-boot-uniphier/master
Masahiro Yamada
- [U-Boot] [PATCH 00/13] log: Add a new logging feature
Masahiro Yamada
- [U-Boot] [PATCH 06/13] log: Add an implemention of logging
Masahiro Yamada
- [U-Boot] [PATCH 13/13] log: Add documentation
Masahiro Yamada
- [U-Boot] [PATCH 06/13] log: Add an implemention of logging
Masahiro Yamada
- [U-Boot] [PATCH 06/13] log: Add an implemention of logging
Masahiro Yamada
- [U-Boot] [PATCH v3 8/8] dm: define dev_*() log functions in DM header
Masahiro Yamada
- [U-Boot] [PATCH v2 8/8] dm: define dev_*() log functions in DM header
Masahiro Yamada
- [U-Boot] [PATCH] linux/bitfield.h: import <linux/bitfields.h> from Linux 4.13
Masahiro Yamada
- [U-Boot] [PATCH V3 1/5] mmc: uniphier-sd: Factor out register IO
Masahiro Yamada
- [U-Boot] [PATCH] mmc: uniphier-sd: Add vqmmc regulator support
Masahiro Yamada
- [U-Boot] [PATCH] mmc: uniphier-sd: Update the file to match V3 patchset
Masahiro Yamada
- [U-Boot] [PATCH] mmc: uniphier-sd: Add vqmmc regulator support
Masahiro Yamada
- [U-Boot] [PATCH 06/13] log: Add an implemention of logging
Masahiro Yamada
- [U-Boot] [PATCH 06/13] log: Add an implemention of logging
Masahiro Yamada
- [U-Boot] [PATCH v2 3/8] treewide: replace with error() with pr_err()
Masahiro Yamada
- [U-Boot] [PATCH] mmc: sdhci-cadence: set timing mode register depending on frequency
Masahiro Yamada
- [U-Boot] [PATCH v2 3/8] treewide: replace with error() with pr_err()
Masahiro Yamada
- [U-Boot] [PATCH] usb: dwc3: add UniPhier specific glue layer
Masahiro Yamada
- [U-Boot] [PATCH] usb: dwc3: add UniPhier specific glue layer
Masahiro Yamada
- [U-Boot] [PATCH v2] linux/bitfield.h: import <linux/bitfield.h> from Linux 4.13
Masahiro Yamada
- [U-Boot] [PATCH] scripts: Move Kconfig contents to cmd/Kconfig
Masahiro Yamada
- [U-Boot] [PATCH] dm: replace dm_dbg() with pr_debug()
Masahiro Yamada
- [U-Boot] [PATCH 052/080] cfi_flash: Reduce the scope of some variables
Masahiro Yamada
- [U-Boot] [PATCH 1/2] rockchip: rk3368: add ENV_MEM_LAYOUT to extra env settings
Andy Yan
- [U-Boot] [PATCH 2/2] rockchip: rk3368: add the missing target and pinctrl config for sheep board
Andy Yan
- [U-Boot] [PATCH] rockchip: add support for backing to bootrom download mode
Andy Yan
- [U-Boot] [PATCH 0/3] support enter download mode on rockchip platform
Andy Yan
- [U-Boot] [PATCH 1/3] rockchip: make boot_mode releated codes reused across all platforms
Andy Yan
- [U-Boot] [PATCH 2/3] rockchip: add support for backing to bootrom download mode
Andy Yan
- [U-Boot] [PATCH 3/3] rockchip: check download key before bootup
Andy Yan
- [U-Boot] rockchip: add support for backing to bootrom download mode
Andy Yan
- [U-Boot] [PATCH 3/3] rockchip: check download key before bootup
Andy Yan
- [U-Boot] rockchip: add support for backing to bootrom download mode
Andy Yan
- [U-Boot] rockchip: add support for backing to bootrom download mode
Andy Yan
- [U-Boot] [PATCH v2 0/3] support enter download mode on rockchip platform
Andy Yan
- [U-Boot] [PATCH v2 1/3] rockchip: make boot_mode related codes reused across all platforms
Andy Yan
- [U-Boot] [PATCH v2 2/3] rockchip: add support for enter to bootrom download mode
Andy Yan
- [U-Boot] [PATCH v2 3/3] rockchip: check download key before bootup
Andy Yan
- [U-Boot] [PATCH v2 0/3] support enter download mode on rockchip platform
Andy Yan
- [U-Boot] [PATCH 2/3] rockchip: back-to-bootrom: replace assembly-implementation with C-code
Andy Yan
- [U-Boot] [PATCH v2 0/5] rockchip: back-to-bootrom: replace assembly-implementation with C-code
Andy Yan
- [U-Boot] [PATCH v2 0/5] rockchip: back-to-bootrom: replace assembly-implementation with C-code
Andy Yan
- [U-Boot] [PATCH v2 0/5] rockchip: back-to-bootrom: replace assembly-implementation with C-code
Andy Yan
- [U-Boot] [PATCH 1/3] rockchip: make boot_mode releated codes reused across all platforms
Andy Yan
- [U-Boot] u-boot Boot issue about rk3188
Andy Yan
- [U-Boot] u-boot Boot issue about rk3188
Andy Yan
- [U-Boot] u-boot Boot issue about rk3188
Andy Yan
- [U-Boot] [PATCH v3 0/6] rockchip: back-to-bootrom: replace assembly-implementation with C-code
Andy Yan
- [U-Boot] u-boot Boot issue about rk3188
Andy Yan
- [U-Boot] u-boot Boot issue about rk3188
Andy Yan
- [U-Boot] u-boot Boot issue about rk3188
Andy Yan
- [U-Boot] u-boot Boot issue about rk3188
Andy Yan
- [U-Boot] [U-Boot, 3/3] rockchip: firefly-rk3399: enable ATF and dwmmc
Kever Yang
- [U-Boot] rockchip: enable rk322x sysreset driver
Kever Yang
- [U-Boot] [PATCH 00/10] rockchip: add tpl and OPTEE support for rk3229
Kever Yang
- [U-Boot] [PATCH 01/10] lib: add TPL_OF_LIBFDT option for TPL
Kever Yang
- [U-Boot] [PATCH 02/10] arm: add option for TPL support in arm 32bit
Kever Yang
- [U-Boot] [PATCH 03/10] arm: add a separate stack for TPL
Kever Yang
- [U-Boot] [PATCH 04/10] rockchip: rk322x: enable tpl support
Kever Yang
- [U-Boot] [PATCH 05/10] sysreset: enable driver support in SPL/TPL
Kever Yang
- [U-Boot] [PATCH 06/10] spl: add support to booting with OP-TEE
Kever Yang
- [U-Boot] [PATCH 07/10] rockchip: rk322x: dts: enable uart2 for SPL/TPL
Kever Yang
- [U-Boot] [PATCH 08/10] rockchip: evb-rk3229: add fit source file for itb
Kever Yang
- [U-Boot] [PATCH 09/10] rockchip: evb-rk3229: add README file for OP-TEE support
Kever Yang
- [U-Boot] [PATCH 10/10] rockchip: evb-rk322x: update defconfig with tpl and optee support
Kever Yang
- [U-Boot] [PATCH] rockchip: rk3328: fix syscon id table
Kever Yang
- [U-Boot] [PATCH] rockchip: pinctrl: use fdtdec_get_int_array() to get interrupt
Kever Yang
- [U-Boot] [PATCH v3 0/2] rockchip: rk3229: add sdram support
Kever Yang
- [U-Boot] [PATCH v3 1/2] rockchip: rk322x: add sdram driver
Kever Yang
- [U-Boot] [PATCH v3 2/2] rockchip: dts: rk3229: remove dram channel info
Kever Yang
- [U-Boot] [PATCH v2 1/5] rockchip: rk322x: update dram bank size
Kever Yang
- [U-Boot] [PATCH 0/4] move rockchip sdram driver to driver/ram
Kever Yang
- [U-Boot] [PATCH 1/4] rockchip: rk3399: move sdram driver to driver/ram
Kever Yang
- [U-Boot] [PATCH 2/4] rockchip: rk3188: move sdram driver to driver/ram
Kever Yang
- [U-Boot] [PATCH 3/4] rockchip: rk3288: move sdram driver to driver/ram
Kever Yang
- [U-Boot] [PATCH 4/4] rockchip: rk3328: move sdram driver to driver/ram
Kever Yang
- [U-Boot] [PATCH v2 00/16] dtoc: Add support for 64-bit addresses
Kever Yang
- [U-Boot] [PATCH 1/2] rockchip: sdhci: update reg map for of-platdata
Kever Yang
- [U-Boot] [PATCH 2/2] rockchip: ram: rk3399: update reg map for of-platdata
Kever Yang
- [U-Boot] [PATCH] rockchip: firefly-rk3399: enable SPL_SYSRESET config
Kever Yang
- [U-Boot] Starting u-boot in USB otg mode
Kever Yang
- [U-Boot] [PATCH 1/3] spl: update bl31_entry() with new name and parameter
Kever Yang
- [U-Boot] [PATCH 2/3] spl: remove SPL_ATF_TEXT_BASE config option
Kever Yang
- [U-Boot] [PATCH 3/3] rockchip: remove CONFIG_SPL_ATF_TEXT_BASE for all boards
Kever Yang
- [U-Boot] [PATCH] spl: typo fix for SPL_ATF_SUPPORT description
Kever Yang
- [U-Boot] [PATCH 2/2] rockchip: ram: rk3399: update reg map for of-platdata
Kever Yang
- [U-Boot] [PATCH] rockchip: enable SPL_SYSRESET config for all sockchip SoCs
Kever Yang
- [U-Boot] [PATCH] rockchip: firefly-rk3399: enable SPL_SYSRESET config
Kever Yang
- [U-Boot] [PATCH] rockchip: enable SPL_SYSRESET config for all sockchip SoCs
Kever Yang
- [U-Boot] [PATCH 2/2] rockchip: ram: rk3399: update reg map for of-platdata
Kever Yang
- [U-Boot] [PATCH] rockchip: add support for backing to bootrom download mode
Kever Yang
- [U-Boot] [PATCH 05/10] sysreset: enable driver support in SPL/TPL
Kever Yang
- [U-Boot] [U-Boot, v4, 3/4] usb: dwc3: add support for 16 bit UTMI+ interface
Kever Yang
- [U-Boot] [PATCH v2 3/3] rockchip: evb-rk3399: update document for board bring up
Kever Yang
- [U-Boot] [PATCH] rockchip: enable TPL_SYSRESET for all rockchip SoCs
Kever Yang
- [U-Boot] [PATCH] rockchip: rock-rk3188: do not use ARCH_MEMSET in TPL
Kever Yang
- [U-Boot] [PATCH 1/5] rockchip: i2c: rk3328: support i2c for rk3328 SoC
Kever Yang
- [U-Boot] [PATCH 2/5] power: pmic: rk816: support rk816 pmic
Kever Yang
- [U-Boot] [PATCH 3/5] power: pmic: rk805: support rk805 pmic
Kever Yang
- [U-Boot] [PATCH 4/5] configs: rk3328: add support for pmic rk8xx and regulator and i2c driver
Kever Yang
- [U-Boot] [PATCH 5/5] rockchip: dts: rk3328-evb: add i2c1 and rk805 nodes
Kever Yang
- [U-Boot] [PATCH] spl: stash bootstage info before jump to next stage
Kever Yang
- [U-Boot] [PATCH] rockchip: rk3188: ram: add support for 16bit row address
Kever Yang
- [U-Boot] [U-Boot,2/5] power: pmic: rk816: support rk816 pmic
Kever Yang
- [U-Boot] [PATCH v2 1/5] rockchip: i2c: rk3328: support i2c for rk3328 SoC
Kever Yang
- [U-Boot] [PATCH v2 2/5] power: pmic: rk816: support rk816 pmic
Kever Yang
- [U-Boot] [PATCH v2 3/5] power: pmic: rk805: support rk805 pmic
Kever Yang
- [U-Boot] [PATCH v2 4/5] configs: rk3328: add support for pmic rk8xx and regulator and i2c driver
Kever Yang
- [U-Boot] [PATCH v2 5/5] rockchip: dts: rk3328-evb: add i2c1 and rk805 nodes
Kever Yang
- [U-Boot] [PATCH] rockchip: clk: rk3368: always run rkclk_init when driver probe
Kever Yang
- [U-Boot] [PATCH v2 0/4] move rockchip sdram driver to driver/ram
Kever Yang
- [U-Boot] [PATCH v2 1/4] rockchip: rk3399: move sdram driver to driver/ram
Kever Yang
- [U-Boot] [PATCH v2 2/4] rockchip: rk3188: move sdram driver to driver/ram
Kever Yang
- [U-Boot] [PATCH v2 3/4] rockchip: rk3288: move sdram driver to driver/ram
Kever Yang
- [U-Boot] [PATCH v2 4/4] rockchip: rk3328: move sdram driver to driver/ram
Kever Yang
- [U-Boot] [PATCH v4 0/2] rockchip: rk3229: add sdram and sd support
Kever Yang
- [U-Boot] [PATCH v4 1/2] rockchip: rk322x: add sdram driver
Kever Yang
- [U-Boot] [PATCH v4 2/2] rockchip: dts: rk3229: remove dram channel info
Kever Yang
- [U-Boot] [PATCH] rockchip: clk: fix typo in rk322x clock driver
Kever Yang
- [U-Boot] [PATCH] rockchip: rk3036: fix grf macro define
Kever Yang
- [U-Boot] [PATCH] rockchip: mkimage: add support for rk3128 soc
Kever Yang
- [U-Boot] [PATCH 0/8] rockchip: add new SoC support for RK3128
Kever Yang
- [U-Boot] [PATCH 1/8] rockchip: rk3128: add device tree file
Kever Yang
- [U-Boot] [PATCH 2/8] rockchip: rk3128: add soc basic support
Kever Yang
- [U-Boot] [PATCH 3/8] rockchip: rk3128: add clock driver
Kever Yang
- [U-Boot] [PATCH 4/8] rockchip: rk3128: add pinctrl driver
Kever Yang
- [U-Boot] [PATCH 5/8] rockchip: rk3128: add sysreset driver
Kever Yang
- [U-Boot] [PATCH 6/8] rockchip: rk3128: add evb-rk3128 support
Kever Yang
- [U-Boot] [PATCH 7/8] rockchip: rk3128: add defconfig for evb-rk3128
Kever Yang
- [U-Boot] [PATCH 8/8] rockchip: rk3128: add sdram driver
Kever Yang
- [U-Boot] [U-Boot, v2, 2/5] power: pmic: rk816: support rk816 pmic
Kever Yang
- [U-Boot] [PATCH] rockchip: rk322x: fix pd_bus hclk/pclk
Kever Yang
- [U-Boot] [PATCH v2] rockchip: rk3188: ram: add support for 16bit row address
Kever Yang
- [U-Boot] [PATCH] misc: Kconfig: Add SPL_I2C_EEPROM option
Yang, Wenyou
- [U-Boot] [PATCH 0/2] misc: i2c_eeprom: Add compatibles
Yang, Wenyou
- [U-Boot] [PATCH 0/7] board: atmel: Convert to support DM_VIDEO
Yang, Wenyou
- [U-Boot] [PATCH v4 0/3] board: atmel: Set the ethernet mac address from eeprom
Wenyou Yang
- [U-Boot] [PATCH v4 1/3] board: atmel: Create board/$(VENDOR)/common folder
Wenyou Yang
- [U-Boot] [PATCH v4 2/3] board: sama5d2_xplained: Replace code to set mac address
Wenyou Yang
- [U-Boot] [PATCH v4 3/3] board: sama5d4_xplained: Set mac address from eeprom
Wenyou Yang
- [U-Boot] [PATCH 0/2] clk: at91: utmi: Fix to set the main clock
Wenyou Yang
- [U-Boot] [PATCH 1/2] clk: at91: utmi: Set the reference clock frequency
Wenyou Yang
- [U-Boot] [PATCH 2/2] ARM: dts: at91: sama5: Add the sfr node
Wenyou Yang
- [U-Boot] [PATCH v2] misc: Kconfig: Add SPL_I2C_EEPROM option
Wenyou Yang
- [U-Boot] [PATCH v4 00/12] board: atmel: Add new board SAMA5D27-SOM1-EK board.
Wenyou Yang
- [U-Boot] [PATCH v4 01/12] board: atmel: Create board/atmel/common folder
Wenyou Yang
- [U-Boot] [PATCH v4 02/12] board: sama5d2_xplained: Replace code of setting mac addr
Wenyou Yang
- [U-Boot] [PATCH v4 03/12] board: sama5d4_xplained: Set mac address from eeprom
Wenyou Yang
- [U-Boot] [PATCH v4 04/12] lib: at91: Add logo files used via API of DM_VIDEO
Wenyou Yang
- [U-Boot] [PATCH v4 05/12] atmel: common: Add function to display via DM_VIDEO's API
Wenyou Yang
- [U-Boot] [PATCH v4 06/12] ARM: at91: spl: Adjust switching to oscillator for SAMA5D2
Wenyou Yang
- [U-Boot] [PATCH v4 07/12] ARM: at91: spl: Add mck function to lower rate while switching
Wenyou Yang
- [U-Boot] [PATCH v4 08/12] ARM: at91: spl: Add boot device for boot from QSPI
Wenyou Yang
- [U-Boot] [PATCH v4 09/12] board: sama5d2_xplained: Make SPL work on spiflash
Wenyou Yang
- [U-Boot] [PATCH v4 10/12] ARM: at91: mach: Add missing defines of MPDDRC
Wenyou Yang
- [U-Boot] [PATCH v4 11/12] ARM: at91: Get the Chip ID of SAMA5D2 SiP
Wenyou Yang
- [U-Boot] [PATCH v4 12/12] board: atmel: Add SAMA5D27 SOM1 EK board
Wenyou Yang
- [U-Boot] [PATCH v2 0/5] configs: at91: Remove value of CONFIG_SYS_EXTRA_OPTIONS option
Wenyou Yang
- [U-Boot] [PATCH v2 1/5] ARM: at91: Move CONFIG_AT91FAMILY option to Kconfig
Wenyou Yang
- [U-Boot] [PATCH v2 2/5] ARM: at91: Add the SoC options to Kconfig
Wenyou Yang
- [U-Boot] [PATCH v2 3/5] ARM: at91: Remove hardware.h included in configs
Wenyou Yang
- [U-Boot] [PATCH v2 4/5] ARM: at91: spl: Add macro CONFIG_XXXX_BOOT support
Wenyou Yang
- [U-Boot] [PATCH v2 5/5] configs: at91: Remove CONFIG_SYS_EXTRA_OPTIONS assignment
Wenyou Yang
- [U-Boot] [PATCH v5 0/9] board: atmel: Add new board SAMA5D27-SOM1-EK board.
Wenyou Yang
- [U-Boot] [PATCH v5 1/9] lib: at91: Add logo files used via API of DM_VIDEO
Wenyou Yang
- [U-Boot] [PATCH v5 2/9] atmel: common: Add function to display via DM_VIDEO's API
Wenyou Yang
- [U-Boot] [PATCH v5 3/9] ARM: at91: spl: Adjust switching to oscillator for SAMA5D2
Wenyou Yang
- [U-Boot] [PATCH v5 4/9] ARM: at91: spl: Add mck function to lower rate while switching
Wenyou Yang
- [U-Boot] [PATCH v5 5/9] board: sama5d2_xplained: Make SPL work on spiflash
Wenyou Yang
- [U-Boot] [PATCH v5 6/9] ARM: at91: spl: Add boot device for boot from QSPI
Wenyou Yang
- [U-Boot] [PATCH v5 7/9] ARM: at91: mach: Add missing defines of MPDDRC
Wenyou Yang
- [U-Boot] [PATCH v5 8/9] ARM: at91: Get the Chip ID of SAMA5D2 SiP
Wenyou Yang
- [U-Boot] [PATCH v5 9/9] board: atmel: Add SAMA5D27 SOM1 EK board
Wenyou Yang
- [U-Boot] [PATCH v6 0/9] board: atmel: Add new board SAMA5D27-SOM1-EK board.
Wenyou Yang
- [U-Boot] [PATCH v6 1/9] lib: at91: Add logo files used via API of DM_VIDEO
Wenyou Yang
- [U-Boot] [PATCH v6 2/9] atmel: common: Add function to display via DM_VIDEO's API
Wenyou Yang
- [U-Boot] [PATCH v6 3/9] ARM: at91: spl: Adjust switching to oscillator for SAMA5D2
Wenyou Yang
- [U-Boot] [PATCH v6 4/9] ARM: at91: spl: Add mck function to lower rate while switching
Wenyou Yang
- [U-Boot] [PATCH v6 5/9] board: sama5d2_xplained: Make SPL work on spiflash
Wenyou Yang
- [U-Boot] [PATCH v6 6/9] ARM: at91: spl: Add boot device for boot from QSPI
Wenyou Yang
- [U-Boot] [PATCH v6 7/9] ARM: at91: mach: Add missing defines of MPDDRC
Wenyou Yang
- [U-Boot] [PATCH v6 8/9] ARM: at91: Get the Chip ID of SAMA5D2 SiP
Wenyou Yang
- [U-Boot] [PATCH v6 9/9] board: atmel: Add SAMA5D27 SOM1 EK board
Wenyou Yang
- [U-Boot] [U-Boot, 1/5] ARM: at91: Move CONFIG_AT91FAMILY option to Kconfig
Yang, Wenyou
- [U-Boot] [PATCH v3 0/5] configs: at91: Remove value of CONFIG_SYS_EXTRA_OPTIONS option
Wenyou Yang
- [U-Boot] [PATCH v3 1/5] ARM: at91: Move CONFIG_AT91FAMILY option to Kconfig
Wenyou Yang
- [U-Boot] [PATCH v3 2/5] ARM: at91: Add the SoC options to Kconfig
Wenyou Yang
- [U-Boot] [PATCH v3 3/5] ARM: at91: Remove hardware.h included in configs
Wenyou Yang
- [U-Boot] [PATCH v3 4/5] ARM: at91: spl: Add macro CONFIG_XXXX_BOOT support
Wenyou Yang
- [U-Boot] [PATCH v3 5/5] configs: at91: Remove CONFIG_SYS_EXTRA_OPTIONS assignment
Wenyou Yang
- [U-Boot] [PATCH v2 0/5] board: atmel: Convert to support video driver model
Wenyou Yang
- [U-Boot] [PATCH v2 1/5] board: sama5d2_xplained: Convert to CONFIG_DM_VIDEO
Wenyou Yang
- [U-Boot] [PATCH v2 2/5] board: sama5d3xek: Convert to CONFIG_DM_VIDEO
Wenyou Yang
- [U-Boot] [PATCH v2 3/5] board: sama5d4ek: Convert to CONFIG_DM_VIDEO
Wenyou Yang
- [U-Boot] [PATCH v2 4/5] board: sama5d4_xplained: Convert to CONFIG_DM_VIDEO
Wenyou Yang
- [U-Boot] [PATCH v2 5/5] board: at91sam9x5ek: Convert to CONFIG_DM_VIDEO
Wenyou Yang
- [U-Boot] [PATCH v3 0/5] board: atmel: Convert to support video driver model
Wenyou Yang
- [U-Boot] [PATCH v3 1/5] board: sama5d2_xplained: Convert to CONFIG_DM_VIDEO
Wenyou Yang
- [U-Boot] [PATCH v3 2/5] board: sama5d3xek: Convert to CONFIG_DM_VIDEO
Wenyou Yang
- [U-Boot] [PATCH v3 3/5] board: sama5d4ek: Convert to CONFIG_DM_VIDEO
Wenyou Yang
- [U-Boot] [PATCH v3 4/5] board: sama5d4_xplained: Convert to CONFIG_DM_VIDEO
Wenyou Yang
- [U-Boot] [PATCH v3 5/5] board: at91sam9x5ek: Convert to CONFIG_DM_VIDEO
Wenyou Yang
- [U-Boot] [PATCH] fdt: call fdt_fixup_ethernet after board/system fixups
Icenowy Zheng
- [U-Boot] [PATCH v2 0/2] Allwinner DE2 HDMI SimpleFB support
Icenowy Zheng
- [U-Boot] [PATCH v2 1/2] video: sunxi: extract simplefb match code to a new file
Icenowy Zheng
- [U-Boot] [PATCH v2 2/2] sunxi: setup simplefb for Allwinner DE2
Icenowy Zheng
- [U-Boot] [PATCH v3 0/3] Allwinner DE2 HDMI SimpleFB support
Icenowy Zheng
- [U-Boot] [PATCH v3 1/3] video: sunxi: extract simplefb match code to a new file
Icenowy Zheng
- [U-Boot] [PATCH v3 2/3] video: add an option for video simplefb via DT
Icenowy Zheng
- [U-Boot] [PATCH v3 3/3] sunxi: setup simplefb for Allwinner DE2
Icenowy Zheng
- [U-Boot] [PATCH v4 0/3] Allwinner DE2 HDMI SimpleFB support
Icenowy Zheng
- [U-Boot] [PATCH v4 1/3] video: sunxi: extract simplefb match code to a new file
Icenowy Zheng
- [U-Boot] [PATCH v4 2/3] video: add an option for video simplefb via DT
Icenowy Zheng
- [U-Boot] [PATCH v4 3/3] sunxi: setup simplefb for Allwinner DE2
Icenowy Zheng
- [U-Boot] [PATCH v4 2/3] video: add an option for video simplefb via DT
Icenowy Zheng
- [U-Boot] [RESEND PATCH 1/3] pwm: sunxi: add support for PWM found on Allwinner A64 and H3
Icenowy Zheng
- [U-Boot] [RESEND PATCH 5/5] sunxi: video: add LCD support to DE2 driver
Icenowy Zheng
- [U-Boot] [PATCH v5 0/4] Allwinner SimpleFB Kconfig cleanup and DE2 SimpleFB support
Icenowy Zheng
- [U-Boot] [PATCH v5 1/4] sunxi: change the DE1 video option to CONFIG_VIDEO_SUNXI
Icenowy Zheng
- [U-Boot] [PATCH v5 2/4] video: sunxi: extract simplefb match code to a new file
Icenowy Zheng
- [U-Boot] [PATCH v5 3/4] video: add an option for video simplefb via DT
Icenowy Zheng
- [U-Boot] [PATCH v5 4/4] sunxi: setup simplefb for Allwinner DE2
Icenowy Zheng
- [U-Boot] [PATCH v5 1/4] sunxi: change the DE1 video option to CONFIG_VIDEO_SUNXI
Icenowy Zheng
- [U-Boot] [PATCH] Revert "sunxi: imply USB_GADGET"
Icenowy Zheng
- [U-Boot] Uboot send pull request
uboot at andestech.com
- [U-Boot] Uboot send pull request
uboot at andestech.com
- [U-Boot] Uboot send pull request
uboot at andestech.com
- [U-Boot] [PATCH v2 2/2] sunxi: setup simplefb for Allwinner DE2
icenowy at aosc.io
- [U-Boot] [linux-sunxi] Re: [PATCH v3 2/3] video: add an option for video simplefb via DT
icenowy at aosc.io
- [U-Boot] [PATCH v4 0/3] Allwinner DE2 HDMI SimpleFB support
icenowy at aosc.io
- [U-Boot] [RESEND PATCH 5/5] sunxi: video: add LCD support to DE2 driver
icenowy at aosc.io
- [U-Boot] [linux-sunxi] Re: [PATCH v5 1/4] sunxi: change the DE1 video option to CONFIG_VIDEO_SUNXI
icenowy at aosc.io
- [U-Boot] [linux-sunxi] Re: [PATCH v5 1/4] sunxi: change the DE1 video option to CONFIG_VIDEO_SUNXI
icenowy at aosc.io
- [U-Boot] [PATCH v2] dm: core: Add livetree documentation
sjg at google.com
- [U-Boot] [PATCH] gitignore: add intermediates from libfdt build
sjg at google.com
- [U-Boot] [PATCH] fdt: fix 'prop (...) not found!' error in 'fdt set' command
sjg at google.com
- [U-Boot] [PATCH 1/3] dm: Add migration plan for CONFIG_BLK
sjg at google.com
- [U-Boot] [PATCH v3 2/2] dm: test: replace dm_scan_dt() by of dm_extended_scan_fdt() in dm_do_test
sjg at google.com
- [U-Boot] [PATCH v3 1/2] dm: core: add clocks node scan
sjg at google.com
- [U-Boot] [PATCH v3] patman: add support for omitting bouncing addresses
sjg at google.com
- [U-Boot] [PATCH] moveconfig: Use fd.write() instead of print >>
sjg at google.com
- [U-Boot] [PATCH] genconfig.py: Print defconfig next to warnings
sjg at google.com
- [U-Boot] [PATCH v2 2/2] dm: core: Show driver name with 'dm tree'
sjg at google.com
- [U-Boot] [PATCH 2/2] sandbox: Convert SANDBOX_BITS_PER_LONG to Kconfig
sjg at google.com
- [U-Boot] [PATCH v2 1/2] dm: core: Drop use of strlcpy()
sjg at google.com
- [U-Boot] [PATCH 1/2] sandbox: Introduce Kconfig option for 32/64 bit host
sjg at google.com
- [U-Boot] [PATCH v3 14/14] test: overlay: Add unit test for stacked overlay
sjg at google.com
- [U-Boot] [PATCH] Travis-CI: Switch back to using the top of tree dtc
sjg at google.com
- [U-Boot] [PATCH v3 13/14] ut: fix fdt_getprop_u32() change
sjg at google.com
- [U-Boot] [PATCH v3 12/14] config: sandbox: Add unit tests
sjg at google.com
- [U-Boot] [PATCH v3 11/14] dtbo: make dtbos special
sjg at google.com
- [U-Boot] [PATCH v3 10/14] doc: overlays: Tweak documentation regarding overlays
sjg at google.com
- [U-Boot] [PATCH v3 09/14] doc: Document how to apply fdt overlays
sjg at google.com
- [U-Boot] [PATCH v3 08/14] fit: fdt overlays doc
sjg at google.com
- [U-Boot] [PATCH v3 07/14] fit: Introduce methods for applying overlays on fit-load
sjg at google.com
- [U-Boot] [PATCH v3 06/14] fit: Do not throw away extra configuration on fit_image_load()
sjg at google.com
- [U-Boot] [PATCH v3 05/14] fit: Allow multiple images per property
sjg at google.com
- [U-Boot] [PATCH v3 04/14] fdt: Allow stacked overlays phandle references
sjg at google.com
- [U-Boot] [PATCH v3 02/14] fdt: Introduce helper method fdt_overlay_apply_verbose()
sjg at google.com
- [U-Boot] [PATCH v3 01/14] Introduce fdt_setprop_placeholder() method
sjg at google.com
- [U-Boot] [PATCH] libfdt: Initialize the stack variable
sjg at google.com
- [U-Boot] [PATCH v2 16/16] dtoc: Add a header to the generated files
sjg at google.com
- [U-Boot] [PATCH v2 14/16] dtoc: Support properties containing multiple phandle values
sjg at google.com
- [U-Boot] [PATCH v2 15/16] dtoc: Rename the auto-generated dt-structs.h file
sjg at google.com
- [U-Boot] [PATCH v2 13/16] dtoc: Put phandle args in an array
sjg at google.com
- [U-Boot] [PATCH v2 12/16] dtoc: Put each phandle on a separate line
sjg at google.com
- [U-Boot] [PATCH v2 11/16] dtoc: Rename the phandle struct
sjg at google.com
- [U-Boot] [PATCH v2 10/16] dtoc: Rename is_phandle() and adjust it to return more detail
sjg at google.com
- [U-Boot] [PATCH v2 09/16] dtoc: Make is_phandle() a member function
sjg at google.com
- [U-Boot] [PATCH v2 08/16] dtoc: Use the Fdt's class's phandle map
sjg at google.com
- [U-Boot] [PATCH v2 06/16] dtoc: Handle 'reg' properties with unusual sizes
sjg at google.com
- [U-Boot] [PATCH v2 07/16] dtoc: Update the Fdt class to record phandles
sjg at google.com
- [U-Boot] [PATCH v2 05/16] dtoc: Add support for 32 or 64-bit addresses
sjg at google.com
- [U-Boot] [PATCH v2 04/16] dtoc: Avoid very long lines in output
sjg at google.com
- [U-Boot] [PATCH v2 03/16] dtoc: Add a 64-bit type and a way to convert cells into 64 bits
sjg at google.com
- [U-Boot] [PATCH v2 01/16] fdt: Sync libfdt up to upstream
sjg at google.com
- [U-Boot] [PATCH v2 02/16] dtoc: Adjust Node to record its parent
sjg at google.com
- [U-Boot] Updated invitation: Unibuild discussion @ Thu 21 Sep 2017 12:00 - 13:30 (MDT) (u-boot at lists.denx.de)
sjg at google.com
- [U-Boot] [PATCH 1/1] sandbox: avoid memory leak in os_dirent_ls
sjg at google.com
- [U-Boot] [PATCH] dm: ofnode: query correct property in livetree ofnode_get_addr_size
sjg at google.com
- [U-Boot] [PATCH 4/4] dm: gpio: pca953x: Drop pointless data structure checks
sjg at google.com
- [U-Boot] [PATCH] dm: core: Round up size when allocating so that it is cache line aligned
sjg at google.com
- [U-Boot] [PATCH 3/4] dm: gpio: Correct use of -ENODEV in drivers
sjg at google.com
- [U-Boot] [PATCH 2/4] dm: gpio: Add a comment about not copying some drivers
sjg at google.com
- [U-Boot] [PATCH] test: print_ut: Add test for %ls strings
sjg at google.com
- [U-Boot] [PATCH 1/4] dm: gpio: vybrid_gpio: Correct driver's use of bind() method
sjg at google.com
- [U-Boot] [PATCH 00/14] Enable Stratix10 SoC support
chin.liang.see at intel.com
- [U-Boot] [PATCH 01/14] arm: socfpga: stratix10: Add base address map for Statix10 SoC
chin.liang.see at intel.com
- [U-Boot] [PATCH 02/14] arm: dts: Add dts for Stratix10 SoC
chin.liang.see at intel.com
- [U-Boot] [PATCH 03/14] arm: socfpga: stratix10: Add Clock Manager driver for Stratix10 SoC
chin.liang.see at intel.com
- [U-Boot] [PATCH 04/14] arm: socfpga: stratix10: Add Reset Manager driver for Stratix10 SoC
chin.liang.see at intel.com
- [U-Boot] [PATCH 05/14] arm: socfpga: stratix10: Add pinmux support for Stratix10 SoC
chin.liang.see at intel.com
- [U-Boot] [PATCH 06/14] arm: socfpga: stratix10: Add misc support for Stratix10 SoC
chin.liang.see at intel.com
- [U-Boot] [PATCH 07/14] arm: socfpga: stratix10: Add mailbox support for Stratix10 SoC
chin.liang.see at intel.com
- [U-Boot] [PATCH 08/14] arm: socfpga: stratix10: Add MMU support for Stratix10 SoC
chin.liang.see at intel.com
- [U-Boot] [PATCH 09/14] arm: socfpga: Restructure the SPL file
chin.liang.see at intel.com
- [U-Boot] [PATCH 10/14] arm: socfpga: stratix10: Add SPL driver for Stratix10 SoC
chin.liang.see at intel.com
- [U-Boot] [PATCH 11/14] arm: socfpga: stratix10: Add timer support for Stratix10 SoC
chin.liang.see at intel.com
- [U-Boot] [PATCH 12/14] ddr: altera: stratix10: Add DDR support for Stratix10 SoC
chin.liang.see at intel.com
- [U-Boot] [PATCH 13/14] board: altera: stratix10: Add socdk board support for Stratix10 SoC
chin.liang.see at intel.com
- [U-Boot] [PATCH 14/14] arm: socfpga: stratix10: Enable Stratix10 SoC build
chin.liang.see at intel.com
- [U-Boot] [PATCH v2 00/19] Add FPGA, SDRAM, SPL loads U-boot & booting to console
tien.fong.chee at intel.com
- [U-Boot] [PATCH v2 01/19] ARM: socfpga: add bindings doc for arria10 fpga manager
tien.fong.chee at intel.com
- [U-Boot] [PATCH v2 02/19] doc: dtbinding: Description on FPGA RBF properties at Arria 10 FPGA manager
tien.fong.chee at intel.com
- [U-Boot] [PATCH v2 03/19] dts: Add FPGA bitstream properties to Arria 10 DTS
tien.fong.chee at intel.com
- [U-Boot] [PATCH v2 04/19] arm: socfpga: Add Arria 10 SoCFPGA programming interface
tien.fong.chee at intel.com
- [U-Boot] [PATCH v2 05/19] arm: socfpga: Enhance FPGA program write rbf data with size >= 4 bytes
tien.fong.chee at intel.com
- [U-Boot] [PATCH v2 06/19] dts: Enable fpga-mgr node build for Arria 10 SPL
tien.fong.chee at intel.com
- [U-Boot] [PATCH v2 07/19] fdt: Add compatible strings for Arria 10
tien.fong.chee at intel.com
- [U-Boot] [PATCH v2 08/19] fs: Enable generic filesystems interface support in SPL.
tien.fong.chee at intel.com
- [U-Boot] [PATCH v2 09/19] arm: socfpga: Add drivers for programing FPGA from flash
tien.fong.chee at intel.com
- [U-Boot] [PATCH v2 10/19] arm: socfpga: Rename the gen5 sdram driver to more specific name
tien.fong.chee at intel.com
- [U-Boot] [PATCH v2 11/19] arm: socfpga: Add DRAM bank size initialization function
tien.fong.chee at intel.com
- [U-Boot] [PATCH v2 12/19] arm: socfpga: Add DDR driver for Arria 10
tien.fong.chee at intel.com
- [U-Boot] [PATCH v2 13/19] configs: Add DDR Kconfig support for Arria 10
tien.fong.chee at intel.com
- [U-Boot] [PATCH v2 14/19] arm: socfpga: Enable build for DDR Arria 10
tien.fong.chee at intel.com
- [U-Boot] [PATCH v2 15/19] arm: socfpga: Add support to memory allocation in SPL
tien.fong.chee at intel.com
- [U-Boot] [PATCH v2 16/19] arm: socfpga: Enhance Intel SoCFPGA program header to support Arria 10
tien.fong.chee at intel.com
- [U-Boot] [PATCH v2 17/19] arm: socfpga: Adding clock frequency info for U-boot
tien.fong.chee at intel.com
- [U-Boot] [PATCH v2 18/19] arm: socfpga: Adding SoCFPGA info for both SPL and U-boot
tien.fong.chee at intel.com
- [U-Boot] [PATCH v2 19/19] arm: socfpga: Enable SPL loading U-boot to DDR and booting U-boot
tien.fong.chee at intel.com
- [U-Boot] [PATCH v2 01/19] ARM: socfpga: add bindings doc for arria10 fpga manager
tien.fong.chee at intel.com
- [U-Boot] BUG: Environment is in SPI flash does not even compile (at least for Orange PI PC2
kope at madnet.sk
- [U-Boot] [PATCH v3 1/8] spi: add support of SPI flash commands
Wenyou.Yang at microchip.com
- [U-Boot] do_nand_status( ) patch
masonccyang at mxic.com.tw
- [U-Boot] ARM i.MX6(A7/A9) embedded core board(CPU module) and custom solution
dairy at myzr.com.cn
- [U-Boot] [PATCH 1/3] GPT: create block device for sandbox testing
alison at peloton-tech.com
- [U-Boot] [PATCH 2/3] add pytest for 'gpt guid' command in sandbox
alison at peloton-tech.com
- [U-Boot] [PATCH 3/3] add pytests for 'gpt rename' and 'gpt swap'
alison at peloton-tech.com
- [U-Boot] [PATCH] doc: remove duplicate text in README.gpt
alison at peloton-tech.com
- [U-Boot] [PATCH 0/2] GPT: create block device for guid testing
alison at peloton-tech.com
- [U-Boot] [PATCH 1/2] GPT: create block device for sandbox testing
alison at peloton-tech.com
- [U-Boot] [PATCH 2/2] add pytests for 'gpt guid' command in sandbox
alison at peloton-tech.com
- [U-Boot] [PATCH v2 1/3] add pytests for 'gpt rename' and 'gpt swap'
alison at peloton-tech.com
- [U-Boot] [PATCH 1/1] add pytests for 'gpt rename' and 'gpt swap'
alison at peloton-tech.com
- [U-Boot] [PATCH] GPT: fix memory leaks identified by Coverity
alison at peloton-tech.com
- [U-Boot] [PATCHv2] GPT: fix memory leaks identified by Coverity
alison at peloton-tech.com
- [U-Boot] [PATCHv2] GPT: fix memory leaks identified by Coverity
alison at peloton-tech.com
- [U-Boot] Starting u-boot in USB otg mode
rivael_il
- [U-Boot] Starting u-boot in USB otg mode
rivael_il
- [U-Boot] Starting u-boot in USB otg mode
rivael_il
- [U-Boot] Starting u-boot in USB otg mode
rivael_il
- [U-Boot] Starting u-boot in USB otg mode
rivael_il
- [U-Boot] [PATCH v3 0/2] dm: core: add clocks node scan
patrice.chotard at st.com
- [U-Boot] [PATCH v3 1/2] dm: core: add clocks node scan
patrice.chotard at st.com
- [U-Boot] [PATCH v3 2/2] dm: test: replace dm_scan_dt() by of dm_extended_scan_fdt() in dm_do_test
patrice.chotard at st.com
- [U-Boot] [PATCH v5 1/1] mmc: Add MMC support for stm32h7 Socs
patrice.chotard at st.com
- [U-Boot] [PATCH v10 00/10] STiH410-B2260: add reset, usb and fastboot support
patrice.chotard at st.com
- [U-Boot] [PATCH v10 01/10] mmc: sti_sdhci: Rework sti_mmc_core_config()
patrice.chotard at st.com
- [U-Boot] [PATCH v10 02/10] ARM: dts: stih410-family: Add missing reset_names for mmc1 node
patrice.chotard at st.com
- [U-Boot] [PATCH v10 03/10] mmc: sti_sdhci: Use reset framework
patrice.chotard at st.com
- [U-Boot] [PATCH v10 04/10] usb: phy: Add STi USB2 PHY
patrice.chotard at st.com
- [U-Boot] [PATCH v10 05/10] STiH410-B2260: enable USB Host Networking
patrice.chotard at st.com
- [U-Boot] [PATCH v10 06/10] STiH410-B2260: enable USB, fastboot, reset, PHY related flags
patrice.chotard at st.com
- [U-Boot] [PATCH v10 07/10] usb: dwc3: Add dwc3 glue driver support for STi
patrice.chotard at st.com
- [U-Boot] [PATCH v10 08/10] ARM: dts: STiH410: set DWC3 dual role mode to peripheral
patrice.chotard at st.com
- [U-Boot] [PATCH v10 09/10] ARM: dts: STiH410: update ehci and ohci compatible
patrice.chotard at st.com
- [U-Boot] [PATCH v10 10/10] board: STiH410-B2260: add fastboot support
patrice.chotard at st.com
- [U-Boot] [PATCH v2 0/9] Add STM32H7 SoC, Discovery and Evaluation board support
patrice.chotard at st.com
- [U-Boot] [PATCH v2 1/9] pinctrl: stm32: add stm32h743-pinctrl compatible
patrice.chotard at st.com
- [U-Boot] [PATCH v2 2/9] serial: stm32x7: add STM32H7 support
patrice.chotard at st.com
- [U-Boot] [PATCH v2 3/9] dm: clk: add clk driver support for stm32h7 SoCs
patrice.chotard at st.com
- [U-Boot] [PATCH v2 4/9] dm: reset: add stm32 reset driver
patrice.chotard at st.com
- [U-Boot] [PATCH v2 5/9] dm: misc: add stm32 rcc driver
patrice.chotard at st.com
- [U-Boot] [PATCH v2 6/9] ARM: DTS: stm32: add stm32h743i-disco files
patrice.chotard at st.com
- [U-Boot] [PATCH v2 7/9] ARM: DTS: stm32: add stm32h743i-eval files
patrice.chotard at st.com
- [U-Boot] [PATCH v2 8/9] ARM: DTS: stm32: adapt stm32h7 dts files for U-boot
patrice.chotard at st.com
- [U-Boot] [PATCH v2 9/9] board: Add stm32h7 SoC, discovery and evaluation boards support
patrice.chotard at st.com
- [U-Boot] [PATCH 1/1] dm: clk: add missing .priv_auto_alloc_size() for stm32f7
patrice.chotard at st.com
- [U-Boot] [PATCH v2 0/3] STiH410-B2260: update environment/configuration settings
patrice.chotard at st.com
- [U-Boot] [PATCH v2 1/3] board: STiH410-B2260: update environment variable
patrice.chotard at st.com
- [U-Boot] [PATCH v2 2/3] board: STiH410-B2260: fix sdram size
patrice.chotard at st.com
- [U-Boot] [PATCH v2 3/3] board: STiH410-B2260: set ramdisk_addr_r to 0x48000000
patrice.chotard at st.com
- [U-Boot] [PATCH v3 0/3] STiH410-B2260: update environment/configuration settings
patrice.chotard at st.com
- [U-Boot] [PATCH v3 1/3] board: STiH410-B2260: update environment variable
patrice.chotard at st.com
- [U-Boot] [PATCH v3 2/3] board: STiH410-B2260: fix sdram size
patrice.chotard at st.com
- [U-Boot] [PATCH v3 3/3] board: STiH410-B2260: set ramdisk_addr_r to 0x48000000
patrice.chotard at st.com
- [U-Boot] [PATCH v1 0/6] Update stm32x7 serial driver
patrice.chotard at st.com
- [U-Boot] [PATCH v1 1/6] serial: stm32x7: cleanup code
patrice.chotard at st.com
- [U-Boot] [PATCH v1 2/6] serial: stm32x7: remove stm32f7-usart and stm32h7-usart compatible
patrice.chotard at st.com
- [U-Boot] [PATCH v1 3/6] serial: stm32x7: prepare the ground to STM32F4 support
patrice.chotard at st.com
- [U-Boot] [PATCH v1 4/6] serial: stm32x7: add fifo support for STM32H7
patrice.chotard at st.com
- [U-Boot] [PATCH v1 5/6] serial: stm32x7: add STM32F4 support
patrice.chotard at st.com
- [U-Boot] [PATCH v1 6/6] serial: stm32x7: remove useless CONFIG_CLK and OF_CONTROL flag
patrice.chotard at st.com
- [U-Boot] [PATCH] arm: dts: omap3: sync DTS with Linux 4.14-rc1
karthik at techveda.org
- [U-Boot] [PATCH 3/3] rockchip: evb-rv1108: add usb init function for dwc2 gadget
wlf
- [U-Boot] [PATCH 3/3] rockchip: evb-rv1108: add usb init function for dwc2 gadget
wlf
- [U-Boot] [PATCH 1/1] ARMv8: get new GD address from gd->new_gd directly
zijun_hu
- [U-Boot] [PATCH 1/1] ARMv8: fix error in freeing stack frame
zijun_hu
- [U-Boot] [PATCH 1/1] ARMv8: make master CPU checking logic more clear
zijun_hu
- [U-Boot] [RESEND PATCH 5/5] sunxi: video: add LCD support to DE2 driver
Jernej Škrabec
- [U-Boot] Armada 38x clearfog pci trouble
Влад Мао
- [U-Boot] Armada 38x clearfog pci trouble
Влад Мао
- [U-Boot] ClearFog base USB keyboard
Влад Мао
Last message date:
Sat Sep 30 23:28:22 UTC 2017
Archived on: Sat Sep 30 23:54:49 UTC 2017
This archive was generated by
Pipermail 0.09 (Mailman edition).