[U-Boot] [PATCH 07/14] arm: socfpga: stratix10: Add mailbox support for Stratix10 SoC

chin.liang.see at intel.com chin.liang.see at intel.com
Tue Sep 19 09:22:24 UTC 2017


From: Chin Liang See <chin.liang.see at intel.com>

Add mailbox support for Stratix SoC

Signed-off-by: Ley Foon Tan <ley.foon.tan at intel.com>
Signed-off-by: Chin Liang See <chin.liang.see at intel.com>
---
 arch/arm/mach-socfpga/Makefile                   |   1 +
 arch/arm/mach-socfpga/include/mach/mailbox_s10.h | 108 ++++++++++
 arch/arm/mach-socfpga/mailbox_s10.c              | 239 +++++++++++++++++++++++
 3 files changed, 348 insertions(+)
 create mode 100644 arch/arm/mach-socfpga/include/mach/mailbox_s10.h
 create mode 100644 arch/arm/mach-socfpga/mailbox_s10.c

diff --git a/arch/arm/mach-socfpga/Makefile b/arch/arm/mach-socfpga/Makefile
index b253914..43e18d2 100644
--- a/arch/arm/mach-socfpga/Makefile
+++ b/arch/arm/mach-socfpga/Makefile
@@ -32,6 +32,7 @@ endif
 
 ifdef CONFIG_TARGET_SOCFPGA_STRATIX10
 obj-y	+= clock_manager_s10.o
+obj-y	+= mailbox_s10.o
 obj-y	+= misc_s10.o
 obj-y	+= reset_manager_s10.o
 obj-y	+= system_manager_s10.o
diff --git a/arch/arm/mach-socfpga/include/mach/mailbox_s10.h b/arch/arm/mach-socfpga/include/mach/mailbox_s10.h
new file mode 100644
index 0000000..b9bddf6
--- /dev/null
+++ b/arch/arm/mach-socfpga/include/mach/mailbox_s10.h
@@ -0,0 +1,108 @@
+/*
+ * Copyright (C) 2017 Intel Corporation <www.intel.com>
+ *
+ * SPDX-License-Identifier:	GPL-2.0
+ */
+#ifndef _MAILBOX_S10_H_
+#define _MAILBOX_S10_H_
+
+/* user define Uboot ID */
+#define MBOX_CLIENT_ID_UBOOT	0xB
+#define MBOX_ID_UBOOT		0x1
+
+#define MBOX_MAX_CMD_INDEX	2047
+#define MBOX_CMD_BUFFER_SIZE	32
+#define MBOX_RESP_BUFFER_SIZE	16
+
+#define MBOX_HDR_CMD_LSB	0
+#define MBOX_HDR_CMD_MSK	(BIT(11) - 1)
+#define MBOX_HDR_I_LSB		11
+#define MBOX_HDR_I_MSK		BIT(11)
+#define MBOX_HDR_LEN_LSB	12
+#define MBOX_HDR_LEN_MSK	0x007FF000
+#define MBOX_HDR_ID_LSB		24
+#define MBOX_HDR_ID_MSK		0x0F000000
+#define MBOX_HDR_CLIENT_LSB	28
+#define MBOX_HDR_CLIENT_MSK	0xF0000000
+
+/* Interrupt flags */
+#define MBOX_FLAGS_INT_COE	BIT(0)	/* COUT update interrupt enable */
+#define MBOX_FLAGS_INT_RIE	BIT(1)	/* RIN update interrupt enable */
+#define MBOX_FLAGS_INT_UAE	BIT(8)	/* Urgent ACK interrupt enable */
+#define MBOX_ALL_INTRS		(MBOX_FLAGS_INT_COE | \
+				 MBOX_FLAGS_INT_RIE | \
+				 MBOX_FLAGS_INT_UAE)
+
+/* Status */
+#define MBOX_STATUS_UA_MSK	BIT(8)
+
+#define MBOX_CMD_HEADER(client, id, len, cmd)		   \
+	(((cmd) << MBOX_HDR_CMD_LSB) & MBOX_HDR_CMD_MSK) | \
+	(((len) << MBOX_HDR_LEN_LSB) & MBOX_HDR_LEN_MSK) | \
+	(((id) << MBOX_HDR_ID_LSB) & MBOX_HDR_ID_MSK)	 | \
+	(((client) << MBOX_HDR_CLIENT_LSB) & MBOX_HDR_CLIENT_MSK)
+
+#define MBOX_RESP_ERR_GET(resp)				\
+	(((resp) & MBOX_HDR_CMD_MSK) >> MBOX_HDR_CMD_LSB)
+#define MBOX_RESP_LEN_GET(resp)			\
+	(((resp) & MBOX_HDR_LEN_MSK) >> MBOX_HDR_LEN_LSB)
+#define MBOX_RESP_ID_GET(resp)				\
+	(((resp) & MBOX_HDR_ID_MSK) >> MBOX_HDR_ID_LSB)
+#define MBOX_RESP_CLIENT_GET(resp)			\
+	(((resp) & MBOX_HDR_CLIENT_MSK) >> MBOX_HDR_CLIENT_LSB)
+
+/* Response error list */
+typedef enum {
+	/* CMD completed succesfully, but check resp ARGS for any errors */
+	MBOX_RESP_STATOK = 0,
+	/* CMD is incorrectly formatted in some way */
+	MBOX_RESP_INVALID_COMMAND = 1,
+	/* BootROM Command code not undesrtood */
+	MBOX_RESP_UNKNOWN_BR = 2,
+	/* CMD code not recognized by firmware */
+	MBOX_RESP_UNKNOWN = 3,
+	/* Indicates that the device is not configured */
+	MBOX_RESP_NOT_CONFIGURED = 256,
+	/* Indicates that the device is busy */
+	MBOX_RESP_DEVICE_BUSY = 0x1FF,
+	/* Indicates that there is no valid response available */
+	MBOX_RESP_NO_VALID_RESP_AVAILABLE = 0x2FF,
+	/* General Error */
+	MBOX_RESP_ERROR = 0x3FF,
+} ALT_SDM_MBOX_RESP_CODE;
+
+/* Mailbox command list */
+#define MBOX_RESTART		2
+#define MBOX_QSPI_OPEN		50
+#define MBOX_QSPI_CLOSE		51
+#define MBOX_QSPI_DIRECT	59
+
+struct socfpga_mailbox {
+	u32 cin;		/* command valid offset */
+	u32 rout;		/* response output offset */
+	u32 urg;		/* urgent command */
+	u32 flags;		/* interrupt enables */
+	u32 pad_0x10_0x1f[4];	/* 0x10 - 0x1F reserved */
+	u32 cout;		/* command free offset */
+	u32 rin;		/* respond valid offset */
+	u32 pad_0x28;		/* 0x28 reserved */
+	u32 status;		/* mailbox status */
+	u32 pad_0x30_0x3f[4];	/* 0x30 - 0x3F reserved */
+	u32 cmd_buf[MBOX_CMD_BUFFER_SIZE];	/* 0x40 - 0xBC circular command
+						   buffer to SDM */
+	u32 resp_buf[MBOX_RESP_BUFFER_SIZE];	/* 0xC0 - 0xFF circular
+						   response buffer */
+};
+
+/* Use define other than put into struct socfpga_mailbox to save spaces */
+#define MBOX_DOORBELL_TO_SDM_REG	(SOCFPGA_MAILBOX_ADDRESS + 0x400)
+#define MBOX_DOORBELL_FROM_SDM_REG	(SOCFPGA_MAILBOX_ADDRESS + 0x480)
+
+int mbox_init(void);
+
+#ifdef CONFIG_CADENCE_QSPI
+int mbox_qspi_close(void);
+int mbox_qspi_open(void);
+#endif
+
+#endif	/* _MAILBOX_S10_H_ */
diff --git a/arch/arm/mach-socfpga/mailbox_s10.c b/arch/arm/mach-socfpga/mailbox_s10.c
new file mode 100644
index 0000000..074940d
--- /dev/null
+++ b/arch/arm/mach-socfpga/mailbox_s10.c
@@ -0,0 +1,239 @@
+/*
+ * Copyright (C) 2017 Intel Corporation <www.intel.com>
+ *
+ * SPDX-License-Identifier:	GPL-2.0
+ */
+
+#include <common.h>
+#include <wait_bit.h>
+#include <asm/io.h>
+#include <asm/arch/mailbox_s10.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+static const struct socfpga_mailbox *mbox_base =
+		(void *)SOCFPGA_MAILBOX_ADDRESS;
+
+#define MBOX_POLL_RESP_TIMEOUT		50 /* ms */
+
+static int mbox_polling_resp(u32 rout)
+{
+	u32 rin;
+	unsigned long start = get_timer(0);
+
+	while (1) {
+		rin = readl(&mbox_base->rin);
+		if (rout != rin)
+			return 0;
+
+		if (get_timer(start) > MBOX_POLL_RESP_TIMEOUT)
+			break;
+
+		udelay(1);
+	}
+
+	debug("mailbox: polling response timeout\n");
+	return -ETIMEDOUT;
+}
+
+/* Check for available slot and write to circular buffer.
+ * It also update command valid offset (cin) register.
+ */
+static int mbox_fill_cmd_circular_buff(u32 header, u32 len, u32 *arg)
+{
+	u32 cmd_free_offset;
+	u32 i;
+
+	/* checking available command free slot */
+	cmd_free_offset = readl(&mbox_base->cout);
+	if (cmd_free_offset >= MBOX_CMD_BUFFER_SIZE) {
+		error("ERROR: Not enough space, cout %d\n", cmd_free_offset);
+		return -ENOMEM;
+	}
+
+	/* write header to circular buffer */
+	writel(header, &mbox_base->cmd_buf[cmd_free_offset++]);
+	/* wrapping around when it reach the buffer size */
+	cmd_free_offset %= MBOX_CMD_BUFFER_SIZE;
+
+	/* write arguments */
+	for (i = 0; i < len; i++) {
+		writel(arg[i], &mbox_base->cmd_buf[cmd_free_offset++]);
+		/* wrapping around when it reach the buffer size */
+		cmd_free_offset %= MBOX_CMD_BUFFER_SIZE;
+	}
+
+	/* write command valid offset */
+	writel(cmd_free_offset, &mbox_base->cin);
+	return 0;
+}
+
+/* Support one command and up to 31 words argument length only */
+int mbox_send_cmd(u8 id, u32 cmd, u32 len, u32 *arg, u8 urgent,
+			u32 *resp_buf_len, u32 *resp_buf)
+{
+	u32 header;
+	u32 rin;
+	u32 resp;
+	u32 rout;
+	u32 status;
+	u32 resp_len;
+	u32 buf_len;
+	int ret;
+
+	/* Total lenght is command + argument length */
+	if ((len + 1) > MBOX_CMD_BUFFER_SIZE) {
+		error("ERROR: command %d arguments too long, max %d\n", cmd,
+		      MBOX_CMD_BUFFER_SIZE - 1);
+		return -EINVAL;
+	}
+
+	if (cmd > MBOX_MAX_CMD_INDEX) {
+		error("ERROR: Unsupported command index %d\n", cmd);
+		return -EINVAL;
+	}
+
+	header = MBOX_CMD_HEADER(MBOX_CLIENT_ID_UBOOT, id , len, cmd);
+
+	ret = mbox_fill_cmd_circular_buff(header, len, arg);
+	if (ret)
+		return ret;
+
+	if (urgent) {
+		/* Send command as urgent command */
+		writel(1, &mbox_base->urg);
+	}
+
+	/* write doorbell */
+	writel(1, MBOX_DOORBELL_TO_SDM_REG);
+
+	while (1) {
+		/* Wait for doorbell from SDM */
+		ret = wait_for_bit(__func__,
+				   (const u32 *)MBOX_DOORBELL_FROM_SDM_REG,
+				   1, true, 500000, false);
+		if (ret) {
+			error("mailbox: timeout from SDM\n");
+			return ret;
+		}
+
+		/* clear interrupt */
+		writel(0, MBOX_DOORBELL_FROM_SDM_REG);
+
+		if (urgent) {
+			/* urgent command doesn't has response */
+			writel(0, &mbox_base->urg);
+			status = readl(&mbox_base->status);
+			if (status & MBOX_STATUS_UA_MSK)
+				return 0;
+
+			error("mailbox: cmd %d no urgent ACK\n", cmd);
+			return -1;
+		}
+
+		/* read current response offset */
+		rout = readl(&mbox_base->rout);
+
+		/* read response valid offset */
+		rin = readl(&mbox_base->rin);
+
+		if (rout != rin) {
+			/* Response received */
+			resp = readl(&mbox_base->resp_buf[rout]);
+			rout++;
+			/* wrapping around when it reach the buffer size */
+			rout %= MBOX_RESP_BUFFER_SIZE;
+			/* update next ROUT */
+			writel(rout, &mbox_base->rout);
+
+			/* check client ID and ID */
+			if ((MBOX_RESP_CLIENT_GET(resp) ==
+			    MBOX_CLIENT_ID_UBOOT) &&
+			    (MBOX_RESP_ID_GET(resp) == id)) {
+				ret = MBOX_RESP_ERR_GET(resp);
+				if (ret) {
+					error("mailbox send command %d error %d\n",
+					      cmd, ret);
+					return ret;
+				}
+
+				if (resp_buf_len) {
+					buf_len = *resp_buf_len;
+					*resp_buf_len = 0;
+				} else {
+					buf_len = 0;
+				}
+
+				resp_len = MBOX_RESP_LEN_GET(resp);
+				while (resp_len) {
+					ret = mbox_polling_resp(rout);
+					if (ret)
+						return ret;
+					/* we need to process response buffer
+					   even caller doesn't need it */
+					resp = readl(&mbox_base->resp_buf[rout]);
+					rout++;
+					resp_len--;
+					rout %= MBOX_RESP_BUFFER_SIZE;
+					writel(rout, &mbox_base->rout);
+					if (buf_len) {
+						/* copy response to buffer */
+						resp_buf[*resp_buf_len] = resp;
+						(*resp_buf_len)++;
+						buf_len--;
+					}
+				}
+				return ret;
+			}
+		}
+	};
+
+	return -EIO;
+}
+
+int mbox_init(void)
+{
+	int ret;
+
+	/* enable mailbox interrupts */
+	writel(MBOX_ALL_INTRS, &mbox_base->flags);
+
+	ret = mbox_send_cmd(MBOX_ID_UBOOT, MBOX_RESTART, 0, NULL, 1, 0, NULL);
+	if (ret)
+		return ret;
+
+	/* Renable mailbox interrupts after MBOX_RESTART */
+	writel(MBOX_ALL_INTRS, &mbox_base->flags);
+
+	return 0;
+}
+
+#ifdef CONFIG_CADENCE_QSPI
+int mbox_qspi_close(void)
+{
+	return mbox_send_cmd(MBOX_ID_UBOOT, MBOX_QSPI_CLOSE, 0, NULL, 0, 0,
+			     NULL);
+}
+
+int mbox_qspi_open(void)
+{
+	int ret;
+
+	ret = mbox_send_cmd(MBOX_ID_UBOOT, MBOX_QSPI_OPEN, 0, NULL, 0, 0, NULL);
+	if (ret)
+		return ret;
+
+	ret = mbox_send_cmd(MBOX_ID_UBOOT, MBOX_QSPI_DIRECT, 0, NULL, 0, 0,
+			    NULL);
+	if (ret)
+		goto error;
+
+	return ret;
+
+error:
+	mbox_qspi_close();
+
+	return ret;
+}
+#endif /* CONFIG_CADENCE_QSPI */
+
-- 
2.2.2



More information about the U-Boot mailing list