[U-Boot] [PATCH 03/19] arm: socfpga: Add driver for flash to program FPGA
Marek Vasut
marex at denx.de
Tue Sep 5 09:04:28 UTC 2017
On 09/05/2017 07:53 AM, Chee, Tien Fong wrote:
> On Isn, 2017-09-04 at 11:39 +0200, Marek Vasut wrote:
>> On 09/04/2017 09:08 AM, Chee, Tien Fong wrote:
>>>
>>> On Rab, 2017-08-30 at 10:52 +0200, Marek Vasut wrote:
>>>>
>>>> On 08/30/2017 10:05 AM, Chee, Tien Fong wrote:
>>>>>
>>>>>
>>>>> On Sel, 2017-08-29 at 13:55 +0200, Marek Vasut wrote:
>>>>>>
>>>>>>
>>>>>> On 08/29/2017 12:45 PM, tien.fong.chee at intel.com wrote:
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> From: Tien Fong Chee <tien.fong.chee at intel.com>
>>>>>>>
>>>>>>> This driver handles FPGA program operation from flash
>>>>>>> loading
>>>>>>> RBF to memory and then to program FPGA.
>>>>>>>
>>>>>>> Signed-off-by: Tien Fong Chee <tien.fong.chee at intel.com>
>>>>>>> ---
>>>>>>> .../include/mach/fpga_manager_arria10.h | 27
>>>>>>> ++
>>>>>>> drivers/fpga/socfpga_arria10.c | 386
>>>>>>> +++++++++++++++++++-
>>>>>>> include/altera.h | 6
>>>>>>> +
>>>>>>> include/configs/socfpga_common.h | 4
>>>>>>> +
>>>>>>> 4 files changed, 422 insertions(+), 1 deletions(-)
>>>>>>>
>>>>>>> diff --git a/arch/arm/mach-
>>>>>>> socfpga/include/mach/fpga_manager_arria10.h
>>>>>>> b/arch/arm/mach-
>>>>>>> socfpga/include/mach/fpga_manager_arria10.h
>>>>>>> index 9cbf696..93a9122 100644
>>>>>>> --- a/arch/arm/mach-
>>>>>>> socfpga/include/mach/fpga_manager_arria10.h
>>>>>>> +++ b/arch/arm/mach-
>>>>>>> socfpga/include/mach/fpga_manager_arria10.h
>>>>>>> @@ -8,6 +8,8 @@
>>>>>>> #ifndef _FPGA_MANAGER_ARRIA10_H_
>>>>>>> #define _FPGA_MANAGER_ARRIA10_H_
>>>>>>>
>>>>>>> +#include <asm/cache.h>
>>>>>>> +
>>>>>>> #define ALT_FPGAMGR_IMGCFG_STAT_F2S_CRC_ERROR_SET_MSK
>>>>>>>
>>>>>>> BIT(0)
>>>>>>> #define ALT_FPGAMGR_IMGCFG_STAT_F2S_EARLY_USERMODE_SET_MSK
>>>>>>>
>>>>>>> BIT(1)
>>>>>>> #define ALT_FPGAMGR_IMGCFG_STAT_F2S_USERMODE_SET_MSK
>>>>>>>
>>>>>>> BIT(2)
>>>>>>> @@ -89,11 +91,36 @@ struct socfpga_fpga_manager {
>>>>>>> u32 imgcfg_fifo_status;
>>>>>>> };
>>>>>>>
>>>>>>> +#if defined(CONFIG_CMD_FPGA_LOADFS)
>>>>>>> +enum rbf_type {unknown, periph_section, core_section};
>>>>>>> +enum rbf_security {invalid, unencrypted, encrypted};
>>>>>>> +
>>>>>>> +struct rbf_info {
>>>>>>> + enum rbf_type section;
>>>>>>> + enum rbf_security security;
>>>>>>> +};
>>>>>>> +
>>>>>>> +struct flash_info {
>>>>>>> + char *interface;
>>>>>>> + char *dev_part;
>>>>>>> + char *filename;
>>>>>>> + int fstype;
>>>>>>> + u32 remaining;
>>>>>>> + u32 flash_offset;
>>>>>>> + struct rbf_info rbfinfo;
>>>>>>> + struct image_header header;
>>>>>>> +};
>>>>>>> +#endif
>>>>>>> +
>>>>>>> /* Functions */
>>>>>>> int fpgamgr_program_init(u32 * rbf_data, size_t rbf_size);
>>>>>>> int fpgamgr_program_finish(void);
>>>>>>> int is_fpgamgr_user_mode(void);
>>>>>>> int fpgamgr_wait_early_user_mode(void);
>>>>>>> +#if defined(CONFIG_CMD_FPGA_LOADFS)
>>>>>>> +const char *get_cff_filename(const void *fdt, int *len,
>>>>>>> u32
>>>>>>> core);
>>>>>>> +const char *get_cff_devpart(const void *fdt, int *len);
>>>>>>> +#endif
>>>>>>>
>>>>>>> #endif /* __ASSEMBLY__ */
>>>>>>>
>>>>>>> diff --git a/drivers/fpga/socfpga_arria10.c
>>>>>>> b/drivers/fpga/socfpga_arria10.c
>>>>>>> index 5c1a68a..90c55e5 100644
>>>>>>> --- a/drivers/fpga/socfpga_arria10.c
>>>>>>> +++ b/drivers/fpga/socfpga_arria10.c
>>>>>>> @@ -13,6 +13,12 @@
>>>>>>> #include <altera.h>
>>>>>>> #include <common.h>
>>>>>>> #include <errno.h>
>>>>>>> +#include <fat.h>
>>>>>>> +#include <fs.h>
>>>>>>> +#include <fdtdec.h>
>>>>>>> +#include <malloc.h>
>>>>>>> +#include <part.h>
>>>>>>> +#include <spl.h>
>>>>>>> #include <wait_bit.h>
>>>>>>> #include <watchdog.h>
>>>>>>>
>>>>>>> @@ -22,6 +28,10 @@
>>>>>>> #define COMPRESSION_OFFSET 229
>>>>>>> #define FPGA_TIMEOUT_MSEC 1000 /* timeout in ms */
>>>>>>> #define FPGA_TIMEOUT_CNT 0x1000000
>>>>>>> +#define RBF_UNENCRYPTED 0xa65c
>>>>>>> +#define RBF_ENCRYPTED 0xa65d
>>>>>>> +#define ARRIA10RBF_PERIPH 0x0001
>>>>>>> +#define ARRIA10RBF_CORE 0x8001
>>>>>>>
>>>>>>> DECLARE_GLOBAL_DATA_PTR;
>>>>>>>
>>>>>>> @@ -118,7 +128,7 @@ static int
>>>>>>> wait_for_nconfig_pin_and_nstatus_pin(void)
>>>>>>> return wait_for_bit(__func__,
>>>>>>> &fpga_manager_base-
>>>>>>>> imgcfg_stat,
>>>>>>> mask,
>>>>>>> - false, FPGA_TIMEOUT_MSEC,
>>>>>>> false);
>>>>>>> + true, FPGA_TIMEOUT_MSEC,
>>>>>>> false);
>>>>>>> }
>>>>>>>
>>>>>>> static int wait_for_f2s_nstatus_pin(unsigned long value)
>>>>>>> @@ -453,6 +463,281 @@ int fpgamgr_program_finish(void)
>>>>>>> return 0;
>>>>>>> }
>>>>>>>
>>>>>>> +#if defined(CONFIG_CMD_FPGA_LOADFS)
>>>>>>> +const char *get_cff_filename(const void *fdt, int *len,
>>>>>>> u32
>>>>>>> core)
>>>>>>> +{
>>>>>>> + const char *cff_filename = NULL;
>>>>>>> + const char *cell;
>>>>>>> + int nodeoffset;
>>>>>>> + nodeoffset = fdt_subnode_offset(fdt, 0, "chosen");
>>>>>>> +
>>>>>>> + if (nodeoffset >= 0) {
>>>>>>> + if (core)
>>>>>>> + cell = fdt_getprop(fdt,
>>>>>>> + nodeoffset,
>>>>>>> + "cffcore-file",
>>>>>>> + len);
>>>>>>> + else
>>>>>>> + cell = fdt_getprop(fdt,
>>>>>>> nodeoffset,
>>>>>>> "cff-
>>>>>>> file", len);
>>>>>> This should be a property of the FPGA , not the system . You
>>>>>> can
>>>>>> have
>>>>>> multiple FPGAs and then this would become a problem.
>>>>>>
>>>>> This setting is for the only one FPGA inside our SoCFPGA.
>>>> You just said it yourself, it is for the only FPGA in your
>>>> SOCFPGA ,
>>>> thus it is a property of the FPGA , not a chosen .
>>>>
>>> Okay, what i trying to tell is that there is no multiple FPGAs in
>>> our
>>> SOCFPGA. The filename is not any hardware properties, it is just a
>>> info
>>> to tell SPL and U-boot which file to look for programming FPGA.
>> What would happen if you attached an FPGA over ie. SPI or PCIe ?
>> Then you have two FPGAs in the system and you need to describe them
>> in
>> the DT and your "chosen" approach breaks down.
>>
> We only need to decribe the internal FPGA of SoCFPGA in DT
This is incorrect. You describe the hardware in DT, if you have multiple
FPGAs, then your approach breaks down.
> such as
> "chosen" to specify which file should SPL looking for getting SDRAM up
> with programming correct periph rbf into FPGA. When the SDRAM is up
> running, then only SPL can load U-boot and booting from there.
> The rest of external multiple FPGAs can be configured through U-boot,
> such as boot script, interactive in console or from PC host. Other than
> that, external FPGA can also be configured through Linux.
>>>
>>> According to chosen node document, chosen node doesn't represent a
>>> real
>>> HW, but serves as place for passing data. This is why our BSP tool
>>> put
>>> the filename info here, the file is named by user in our tool, and
>>> this
>>> info would be consumed by SPL to program FPGA.
>>> What do you think?
>> Your BSP tool is broken.
>>
> The BSP tool is used to describe internal FPGA in SOCFPGA. Other
> external FPGAs other than SOCFPGA itself, it can be programmed through
> U-boot.
The BSP tool is broken if it generates broken DT, do I have to repeat
myself ?
[...]
--
Best regards,
Marek Vasut
More information about the U-Boot
mailing list